Once Audio/Video has been merged, I can no longer access the video's source setting on some clips

Hi.
Shot Scarlett, doing a pass in RedCineX, and bam, I can no longer reload the RMD files on some of the clips in premiere.
In the timeline, if I right click the video, "source settings" is clickable, but doesn't do anything.
If I reveal the merged file in the project, the "source settings" option is greyed out.
If I click the original r3d file in the project, I CAN access source settings, but reloading the RMD does not modify the merged clip.
What's really bothersom is that this is only affecting about 1/2 my merged clips, all created at the same time.
I've unlinked, relinked....I've rain danced...I've swore...nothing works....any help?

I cannot help with this problem (not having any RED media myself), but if your media was shot at true 24 fps (not 23.976), I could use another pair of eyes on a particular issue that might also affect you.
http://forums.adobe.com/thread/1385093?tstart=120

Similar Messages

HT204370 Once a movie has been purchased where can it be accessed on the cloud?

I bought a movie on iTunes, downloaded it, when I discovered it was using a lot of memory I deleted it, presuming it would transfer safely to iCloud. However, I cannot locate anything but music in my iCloud. How do I locate that movie in my iCloud?

Learn more about which content types are supported for iTunes in the Cloud by country, as well as where iTunes Match is available.
You should always maintain a backup copy.

I installed 7.1.2 update for my iphone5 and I have problems. I can no longer access the internet on my phone. My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet. I've dis some searching for a solution, but nothing works. What has this happened? And how can I fix it?

LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
If your Wi-Fi is working, then you should be able to access the internet.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
* No data is lost due to a reset
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

The project file ' ' has been renamed or is no longer in the solution.

Hello Folks:
   Developing on Win 8.1 Pro, Visual Studio 2010 Pro, C++.
   I'm revisiting a project I haven't touched in over 2 years.
   Attempts to build result in a pop up displaying this error:
      The project file ' ' has been renamed or is no longer in the solution.
   And the build terminates.
   Things might have changed in the underlying static libraries used by other projects.
      I've looked through the Solution Explorer and the project's properties "Framework and References" window but I don't see anything with such an odd name.
   How do I resolve this problem?
      Thanks
      Larry

Some other things to try:
1. Reload each project in the solution (Right-click/Unload Project; Right-click/Reload project). See if any of them has an issue reloading.
2. If you have multiple projects in the solution: Make a copy of the solution and load the copy. Go in Build Dependencies and uncheck all. Now build each project individually and see which one has the problem. (Some of them might not link
due to missing libraries, but that's OK. You just want to see that the build starts). Double-check which configuration Visual Studio picks when it builds each project; if they are not all the same, the problem is with the project configurations.
3. Load the solution file with the XML editor. (Make sure no other Visual Studio instance has the solution open when you do this). Check each Project line for oddities, specifically, empty or mangled names, or missing project files. Also
check the Configurations. It could be that the problem project doesn't have an equivalent configuration to the one you are building. Sometimes the configuration definitions in the solution file get messed up.

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?

The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again.

WRT54G2 - can no longer access router webpage after changing setting

hello i've started gaming again so i ended up configuring a static IP using the network and sharing centre in the control panel and i'm online with the fixed IP, and i had some ports forwarded in my router web page and everything has been working great the past 2 days. however, earlier this morning i could not join any games all of a sudden even tho i played 1 when i just got up, so i went to my router home page and changed a setting, i'll link a screen shot, i'm pretty sure i just changed the local IP address from 192.168.1.1 to 192.168.1.10 (which is what i set it as 2 days ago in the control panel network tcp ip4 thing) it's possible i modified somethin in the dchp server section but i was nearly convinced that was disabled anyways. http://screenshots.portforward.com/routers/Linksys/WRT54G2/Basic_Setup.htm is the link if it helps
anyways like the thread title says, i can no longer access the router web page which was 192.168.1.1, instead all i see is a sickening image about something called internet information services!? talk about a weird thing to see when i expected to see my router web page. but it's related to microsoft so it's not malacious at least. any ideas on how i fked up so bad and how to fix it, so i can see the router web page again, and edit the settings back to the way it was this morning

I can't access either and c ant get a connection plugging in my laptop I got a new modem and I'm trying to configure my modem to my wrt54g2 and lost
Hi randallel, you may have to do a hard reset before reconfiguring your router with the new modem. To do the proper reset, please press down the reset button for 30 seconds while the power is on. Release the button and unplug the device. Plug it back in and reinstall the settings based on the type of Internet connection that you have. Hope this helps.

HT1918 How can I change my rescue email. I am trying to change my email for my Apple account because I can no longer access the email on the account. My only email I use is my rescue email and it will not allow me to change my Apple ID email to my rescue

How can I change my rescue email or get rid of it? I need to change my email under my apple ID to the email that is my rescue email. It won't allow me to have the same email. I only have one email address and can no longer access the email address under my apple ID

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

Hi
After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
All other features seem to work... only opening the iTunes store is failing..
I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
Please help

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

HT3843 I install the Genius for Apps and I can no longer access the Apps Store on my I phone

I installed the Genius for Apps on my new IPhone 5 and I can no longer access the App Store and when I tap App Store I just get a white screen with the heading Genius for Apps with a white screen and no active keys.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Updated to 10.4.1 on Itunes and now can no longer access the actual Itunes store ...

Now i have a bit more space, i can explain what is really properly wrong. The other day i updated my itunes to the 10.4.1 version and now can no longer access the Itunes store - whenever i try to do so i get the bar at the top gets to about half way then stops and nothing happens - on rare occasions however i am taken into a place that resembles the Itunes store but there is no detail and whenever i click on anything, NOTHING happens.
Now on a SUPER RARE occasion i'll get a notice that the request was timed out?
If ANYBODY can help me i'll be very grateful
Matthew

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

Can no longer access the iTunes store.

As of a few days ago I can no longer access the iTunes Store. Keep getting the page that urges me to upgrade.
I cannot not upgrade to the current version on my G5 Power PC. Cannot access by using Search either. I am running
iTunes 7.5 because all newer versions required an upgrade of Quicktime which screwed up the performance of Final Cut Studio,
which I can also not upgrade because I don't own an Intel Mac. I am so tired of Apple not supporting their loyal customers
who own older Macs, especially in these hard economic times. Was considering the purchase of an iPhone, but not anymore.
If anyone knows of a work around to the iTunes problem I would appreciate an answer. It not, then Goodbye Apple it was nice
knowing you.

This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
1. download & install iTunes 9.2.1 (101 MB)
2. download & install Quicktime 7.5.5 (61 MB)
3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
4. download Safari (26 MB)
5. Safari won't install without 'latest security update'
6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
7. take a long walk
8. install security update and restart
9. install Safari and restart
And yes, now I can download music again from the iTunes store. I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

Once Audio/Video has been merged, I can no longer access the video's source setting on some clips

Similar Messages

Maybe you are looking for