Once cancelled, Accept Certificate window never appears again! (HELP!)

Ok, I am developing a self-signed applet for me and a few friends to play a webgame.
They can still play. In fact, they're having a grand ole' time. but ME, the DEVELOPER is locked out.
WHY? because I hit "cancel" on the "accept certificate" one time.
It's been 3 days now, and I'm at my wits end trying to figure out how to flush my accepted / rejected certificates!
It's not in the java > security > control panel thing, because I hvae played around with every option there, and still in both my browsers (even after reinstalling firefox) I get just a plain white-screen whit no popup window when I visit the html.
Simply stated: How do I force the "Accept Certificate" dialogue to pop up again? I'm sure anyone who's made a signed applet experiences this worry!!!

Hi,
The original posters have probably worked this out already ;)
On Windows you can control certificates by going to Control Panel->Java Control Panel->Security and click "Certificates"

Similar Messages

State Diagram Editor window never appears

When I follow the directions in the State Diagram Toolkit.pdf manual(page 4) and drag and drop a state diagram tool onto an empty block diagram, the editor window never appears, only the block diagram code appears. I bet it's something really simple, but i'm baffled. Thanks for any suggestions.
Win XP
Pent4 2.2G
LabVIEW 7.1 Development System
Already tried reinstalling LView and StateDToolkit...

"It really is a nice tool."
Ditto that!
I go reaching for it any time I can not "see" the code I need.
In LV 7.1 they changed the operation of the SDE such that only one SDE window can be open at a time. In LV 7.0 you could have more than one open at a time.
Try what Odd_Modem suggested and let us know if it does not show up.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Anyconnect VPN not prompting to accept Certificate (Windows 7)

Hello,
I have an issue with windows 7 and anyconnect. When trying to connect to the VPN server the anyconnect client pops up a window saying that the server certificate cannot be verified.
Doing the same in a windows XP machine just pops a window and prompts me to accept or refuse the certificate, which at least works.
Any hints on this?
Regards,
Alex

I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
HTH
Rick

EM Window Never Appears

Running EM CS6 on Yosemite, On one user, EM starts bur the extension window does not come up. All other users on machine are fine

Have you tried uninstalling and re-installing the app?

I recently upgraded to os x mavericks,but i am getting this type of message from key chain password,even i gave password for this but again that window will appear and asks for password , bcoz of this safari and other apps aren't responding,plz help thnx

it asks password for i cloud helper and messenger agent calendar agent , adress book sync , think that i will give correct password for 1 st one , after that 2nd keychain window will ask password i will try three password it will take one password , this continues for 5 keychain windows and 1st keychain password window will appear again what i have given password at first it won't take it again if i give another password it will take , and keychain password window reappear again and again

See my anwser here.
https://discussions.apple.com/message/23498909#23498909

How to change profile if I pressed "never ask again"?

When the firefox starts, profiles window pops up, and you can create or choose profiles. I've created 2, for me and my friend. Once i've accidentaly pressed "never ask again" and "start firefox". Now I cannot choose profiles, because their window doesn't pop up when firefox starts.

Edit the file profiles.ini and change StartWithLastProfile=1 to StartWithLastProfile=0
* http://kb.mozillazine.org/profiles.ini_file
You can also start the Profile Manager and remove the check-mark
* http://kb.mozillazine.org/Profile_Manager

Certain pop up windows are not apperaing on my screen. Save as PDF and Doc preferences never appear

Certain pop up windows are not apperaing on my screen. Save as PDF and Doc preferences never appear, and lock me out until I press return. So they are active, I just can't see them. Any ideas?

They are obviously off the screen somewhere. Did you have a dual monitor set up at one time? You can try increasing the resolution of your screen to see if you can get a part to show or maybe just resrt the preferences (Cmd(Ctrl)+Opt(Alt)+Shift as you restart AI) to reset the defaults.

Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?

usaspirit88 wrote:
Phone asked for voicemail password after update to iOS5. I pushed cancel bc I didn't know it. Now I now it but the screen just says set-up. How do I get the prompt to appear again?
Try typing in your 10 didget cell number. Restart iPhone to get the prompt again.

HT1688 My iPhone accepts messages from a straight talk phone, when sending a text it looks like it goes through but never appears on the straight talk phone

My iPhone accepts messages from a straight talk phone, when sending a text it goes through on my end but never appears on the straight talk phone. I'm having to use a secondary app that allows me to send a message that actually appears on the straight talk phone. I now have the iPhone 5 thinking it would fix the problem but it did not, and now that I have the 4G LTE it uses up my internet in a second.

The iPad doesn't do SMS text messges which are necessary to send messges to a regular phone.

Why does windows media player 11 plug in never appear in firefox after I install it, I am trying to play a video that says I have this plug in missing.

I sometimes get a blank video player frame saying I need a plug in. FF plug in finder tells me I must manually install Windows Media Player 11. I have done this many times but the plug in never appears in FF.

Your More system details list show the WMP plugin (np-mswmp), so that should be working.
See:
* http://kb.mozillazine.org/Testing_plugins
* http://www.vdat.com/techsupport/windowstest.asp

How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto. I accidentally clicked "never ask again" so it never appears. I want it back.

How do I bring back the "Are you sure you want to delete this photo" dialog box in Iphoto. I accidentally clicked "never ask again" so it never appears. I want it back.

The following previous discussion may help: Re: Delete Confirmation Warning. I want back.

IMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again. HELP!?

iMovie '11 - when I open iMovie the application starts, but there is no window, If i plug in my iPhone the window will appear from the top right corner, but disappear again, even if i use a drop down menu from the top menu bar and select, say 'New Project', it will appear from the top right corner, let me choose a new project, only to disappear again into that same corner.

Argh I'm having the same problem! I always use imovie, and haven't had this prob before... apprantly imovie 11 is full of bugs like this. Anyone know if theres any way of downgrading?

Cannot launch Acrobat XI Pro. The EULA appears. I accept. It appears again and again...

Hello,
I ve just installed a trial version but impossible to go further than the license agreement which appears again and again.
My OS is Windows 8.1.
Thanks for your help
Have a nice day.
Ann

Hi all,
Someone recommend this article http://www.ehow.com/info_12217860_adobe-acrobat-pro-doesnt-remember-eula.html and it works... If someone has the same pb it can help. Thanks thanks kglad
!!! cannot launch Acrobat XI Pro, it stops at the EULA window HELP !!!

TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

If Disk Utility cannot see your drive it doesn't look good.
You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
additonal notes;
Gray screen appears during startup

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Once cancelled, Accept Certificate window never appears again! (HELP!)

Similar Messages

Maybe you are looking for