Once gdm loads I cannot ctrl+alt+Fx to get a tty
Once gdm loads, I cannot ctrl+alt+Fx to get a tty. I just get a black screen where my logon screen used to be. I dunno what has changed on this system. I installed xfce4 to play with a bit but that is the only recent change. If I boot into mode 3 everything is fine until I load up X via xinitrc. This causes the same behavior (black screen when I hit ctrl+alt+Fx). Thoughts are appreciated!
graysky wrote:I tried both nvidia from [testing] and from [extra] with no change. Any idea which log I can look at? dmesg.log gives nothing; Xorg.log looks just fine.
I meant nouveau :-)
You know that nvidia drivers don't use KMS and there will be a couple seconds black screen before you get to the tty, right?
Similar Messages
-
I did a new install and went for the ext4 option, I installed everything I usually do but went with nvidia-xcofig rather than the usual Xorg -configure, now having set everything up all I get is a blank screen, I cant ctrl alt backspace to get to console and mt laptop just reboots after about 10 seconds or so.
I have Mint installed on another partition hoping that I could get into rc.conf and ! out gdm but ext4 isn't supported! lol
What do I do, I'm well and truely stumped!
I left arch for 4 days as I got tired of things breaking but had to come back, I miss my arch, well until this peach of a problem came up
Thanks
Last edited by Andy Mack (2009-03-10 15:39:08)What would I need to edit rc.conf for?
to comment out gdm!!
I hope you have installed hal and read the news about disabling autoadddevices, enabling ctrl alt backspace with DontZap etc -
Cannot Ctrl+Alt+F1 after nvidia-173xx update
I have recently discovered that I cannot switch into "terminal mode" with the latest nvidia-173xx drivers (nvidia-173xx-173.14.25-1 and nvidia-173-xx-utils-173.14.25-1). Whenever I do Ctrl+Alt+Fn, the screen goes black with no terminal prompt. Then the only thing to do is Ctrl+Alt+F8 (F8 instead of F7, as it used to be) to go back to the X11 session.
This happens also if I logout from KDE and select "Console login" from within the KDM menu: the screen just goes black (after flickering a bit): in this case the only solution is to wait for KDM to kick in and display the (GUI) login screen.
An other thing I discovered is that, when I shutdown/restart the computer and the X11 session is terminated, the screen goes back to terminal mode but the display (and all those messages about services going down) is dimmed down.
The temporary solution for me is to go back to the previous version: nvidia-173xx-173.14.22-4 and nvidia-173-xx-utils-173.14.22-4. Here everything is fine (going to console mode, screen during shutdown, etc.)
Here it is my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "ca"
Option "XkbModel" "microsoftpro"
Option "XkbOptions" "compose:rwin,terminate:ctrl_alt_bksp"
Option "XkbRules" "xfree86"
Option "XkbVariant" "multi"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "X183H"
HorizSync 31.0 - 80.0
VertRefresh 55.0 - 76.0
Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807 -HSync +Vsync
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "PixmapCacheSize" "300000"
Option "OnDemandVBlankinterrupts" "True"
Option "IgnoreEDID" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "ConnectToAcpid" "False"
SubSection "Display"
Depth 24
Modes "1360x768@60"
EndSubSection
EndSection
And here you have my kdmrc (in case it is of any help):
[General]
ConfigVersion=2.4
ConsoleTTYs=tty1,tty2,tty3,tty4,tty5,tty6
PidFile=/var/run/kdm.pid
ReserveServers=:1,:2,:3
ServerVTs=-7
StaticServers=:0
[Shutdown]
BootManager=None
HaltCmd=/sbin/halt
RebootCmd=/sbin/reboot
[X-*-Core]
AllowNullPasswd=false
AllowRootLogin=false
AllowShutdown=Root
AutoReLogin=false
ClientLogFile=.xsession-errors-%d
Reset=/usr/share/config/kdm/Xreset
Session=/usr/share/config/kdm/Xsession
SessionsDirs=/usr/share/config/kdm/sessions,/usr/share/apps/kdm/sessions
Setup=/usr/share/config/kdm/Xsetup
Startup=/usr/share/config/kdm/Xstartup
[X-*-Greeter]
AntiAliasing=false
ColorScheme=Oxygen
FaceSource=AdminOnly
FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0
ForgingSeed=1250611569
GUIStyle=Oxygen
GreetFont=Serif,20,-1,5,50,0,0,0,0,0
GreetString=Welcome to %s at %n
GreeterPos=50,50
HiddenUsers=
Language=en_US
LogoArea=Logo
LogoPixmap=/usr/share/apps/kdm/pics/kdelogo.png
MaxShowUID=65000
MinShowUID=500
Preloader=/usr/bin/preloadkde
SelectedUsers=
ShowUsers=NotHidden
SortUsers=true
StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0
Theme=/usr/share/apps/kdm/themes/oxygen-air
UseBackground=true
UseTheme=true
UserCompletion=false
UserList=true
[X-:*-Core]
AllowNullPasswd=true
AllowShutdown=All
NoPassEnable=false
NoPassUsers=
ServerArgsLocal=-nolisten tcp
ServerCmd=/usr/bin/X -br -novtswitch -quiet
TerminateServer=true
[X-:*-Greeter]
AllowClose=false
DefaultUser=sergio
FocusPasswd=true
LoginMode=DefaultLocal
PreselectUser=Previous
[X-:0-Core]
AutoLoginEnable=true
AutoLoginLocked=false
AutoLoginUser=sergio
ClientLogFile=.xsession-errors
[Xdmcp]
Enable=false
Willing=/usr/share/config/kdm/Xwilling
I wasn't able to find any relevant messages in Xorg.log. Another piece of information that may be relevant: the framebuffer resolution is set to "vga=773" in GRUB (which, I think, automatically disables KMS).
I'd rather be able to upgrade my nvidia driver in the future. Have anyone experienced the same problem? Is there any workaround it?
Thank you very much.
[Edit] I forgot: I am on i686, the monitor is an LCD widescreen and the nvidia card is an old one: FX 5200 [/Edit]
Last edited by TioDuke (2010-02-23 15:22:46)Hey, I can confirm this, albeit with a different driver.
I have upgraded nvidia drivers from 190.56 to 195.36 and I can't switch back into console once X is started. The boot output is printed correctly though.
There is also another issue: If I don't set vga= in the boot options, my boot output hangs at "Waiting for udev uevents to be processed [busy]" (see: http://bbs.archlinux.org/viewtopic.php?id=92189).
.After a while X will start, even without vga= parameter.
The problem definitely doesn't exist with 190.56...
Maybe time for a bug report to NVIDIA?
Problem also stayed even if I exchanged vesafb for uvesafb.
Cheers
Bastian -
X randomly crashing, cannot ctrl-alt-bksp
The first crash was a couple of months ago, and I will admit I just ignored it, especially since it didn't crash again for about a month. Then I was starting to think I might have a problem and did a bit of research. I thought turning off compositing might be the solution so I did that and it still crashed about a week later. The crashes were so dispersed that I just forgot about them, but I think I have to do something now.
Recently I installed xdm. The problem is, now when X crashes, xdm tries to get X to run again, and it goes into an endless cycle of crashes. Ctrl-Alt-Backspace does not work, Ctrl-Alt-F1 does not bring me into a terminal, and manually powering off is the only way to get out of it. Before I installed xdm; after it crashes I can Ctrl-Alt-F1 to go into a virtual terminal and reboot. (Rebooting seemed to be the only way to get it working. There were no X or xorg processes running after the crash to kill, and I couldn't startx again.)
I also noticed that I'm definately not the only one with this problem, but I can't seem to find a solution anywhere (that works for me):
http://bbs.archlinux.org/viewtopic.php?id=56079
http://bbs.archlinux.org/viewtopic.php?id=55071
http://bbs.archlinux.org/viewtopic.php?id=54733
http://bbs.archlinux.org/viewtopic.php?id=58389
http://bbs.archlinux.org/viewtopic.php?id=55416
No, I don't have ndisswrapper. (I have a laptop but I never use wireless so I haven't set it up yet.)
I don't believe this is a hardware problem, because I run Windows on the same computer and have never had this problem on it.
Also I should note that now X is slow to start. Before (a couple of years ago) I could type startx and then I'd immediately be in X, but now the screen turns black and flickers a little before going into X. X has had this problem ever since I returned to Linux.
While it is going to be hard to find an immediate solution to this, does anoyone know how to get the magic sysreq key working in Arch? I have a very good feeling that the magic sysreq key could save me from manually turning off the power, but it doesn't seem to work for some reason. Would I need to compile a custom kernel? (I sure hope not)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "GLcore"
Load "dri"
Load "glx"
Load "xtrap"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "Xkblayout" "us"
#Option "Xkblayout" "dvorak"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
DisplaySize 336 210 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "LPL0000"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
#This no longer seems to work, must startx with DPI arg
#Option "UseEdidDpi" "false"
#Option "DCC" "no"
#Option "DPI" "96 x 96"
DisplaySize 338 212
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
Option "NoDDC" "true" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
#Option "DPI" "96 x 96"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
#Compositing may cause random crashing
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
$ lscpi
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
07:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
I have saved my xorg logs from right after the crash, but I don't see anything funny in them (well I'm not really the person to ask) and they are too big to fit in a post. If they are required I can try to find some way to show them.
Last edited by sokuban (2008-11-21 23:57:35)Hi
Did that fix you?
I have been having the issue for a while, seems pretty random though I suspect virtual-box and/or wine to be tricker, but I have seen it crash without either, I think.
Anyways, black screen, lose keyboard, cold boot.
gnome, nvidia 177.82,
2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ AuthenticAMD
Xorg.0.log.old
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux abbit 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:56:24 UTC 2008 i686
Build Date: 05 December 2008 09:10:55PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 7 01:22:37 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation G80 [GeForce 8800 GTS] rev 162, Mem @ 0xfa000000/0, 0xe0000000/0, 0xf8000000/0, I/O @ 0x0000ac00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.82 Tue Nov 4 14:03:48 PST 2008
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 177.82 Tue Nov 4 13:42:45 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTS (G80) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 327680 kBytes
(--) NVIDIA(0): VideoBIOS: 60.80.0d.00.02
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GTS at PCI:1:0:0:
(--) NVIDIA(0): LG L1900R (DFP-1)
(--) NVIDIA(0): LG L1900R (DFP-1): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): LG L1900R (DFP-1): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-1
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms" "True"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech USB Gaming Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech USB Gaming Mouse: always reports core events
(**) Logitech USB Gaming Mouse: Device: "/dev/input/event2"
(II) Logitech USB Gaming Mouse: Found x and y relative axes
(II) Logitech USB Gaming Mouse: Found mouse buttons
(II) Logitech USB Gaming Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "dk"
(**) AT Translated Set 2 keyboard: xkb_layout: "dk"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) NVIDIA(0): Initialized GPU GART.
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7fc8400]
Fatal server error:
Caught signal 11. Server aborting
(II) Logitech USB Gaming Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:11.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:16.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2)
02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Not sure what logs might else be of interest.
Don't feel like downgrading kernel or update to beta drivers if it's not the pit at all.
edit;
running nvidia beta (180.16) for a week or so, no crash, happy it seems to be the fix but not impressed at all.
Last edited by cell (2008-12-21 10:10:39) -
My problem is explained fully in the descriptive sentence
I would go easy on the abbreviations, though. Try the suggestions here:
* https://support.mozilla.org/en-US/kb/Firefox%20crashes -
I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
I've added a couple of screencaps of the problem. (or tried to)
[http://i53.tinypic.com/161hvh2.jpg The white rectangle]
[http://i51.tinypic.com/dwsq1.png Error message]Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!
-
[Solved] cannot access ttys (Ctrl + Alt + F1-F7)
When I press Ctrl + Alt + F1 I just get this error (Ctrl + Alt + F2 brings me back):
:: Loading Initramfs
commandline read: splashy
commandline read: boot
waiting 90 seconds for device /dev/disk/by-uuid/e289..[numbers]..311 ...
... When pressing Ctrl + Alt + F3-F7 I just get blank screen.
Here's the output of ps a:
[det@myhost ~]$ ps a
PID TTY STAT TIME COMMAND
2183 tty2 Ss+ 3:10 /usr/bin/Xorg :0 -audit 0 -auth /var/lib/gdm/:0.Xauth
14044 pts/0 Ss 0:00 bash
14046 pts/0 R+ 0:00 ps a
Last edited by algorythm (2009-08-06 13:05:59)Ii guess that is.. . See my both (/etc/)inittab(.pacsave) files look exactly the same:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
id:3:initdefault:
# Boot to X11
#id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux
c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
I guess I need to change the vc/s to ttys?
Like this?:
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
Edit: Yeah, thanks man.
Edit 2: Later on I also edited /etc/rc.sysinit the same way
Last edited by algorythm (2009-08-07 22:58:15) -
It stops working if I access websites with videos, and all sort of more complex flash. It I try to write an e-mail, it also stops. I can't do anything. PC keeps working, though. So I press ctrl+alt+del. It opens that window asking if you want to close all the tabs. I notice that firefox start to work again, behind that window. But, once I close the window, it stops again. Sometimes I can close the tab with the video before it hangs again, which can take a few ctr+alt+del's. It doesn't happen with other browsers! It started 1 week ago. Is it an extension? Or a virus (i use avast)? Thank you!
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* [[Managing the Flash plugin]]
Check and tell if its working. -
Cannot switch to tty with CTRL+ALT+F?
Hi everybody,
I'm sitting in front of a fresh archlinux installation with kdemod installed. I notice that I can't switch to the terminals with CTRL+ALT+F?. I always used this kind of switching without configuring anything, so what could have gone wrong?
Thanks for any suggestions...
EDIT: by accident I wrote the german "STRG" instead of "CTRL"
Last edited by Kei (2007-07-09 16:40:00)i've got the same problem here
I can kill sessions via CTRL+ALT+BKSP and navigate from vt1 to vt2 etc.., but not from X to any other terminals!
Global shortcuts don't seem to work either, might be a related problem!?
Output from xev for CTRL, ALT, F1
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1772087, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774643, (-158,305), root:(878,360),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774702, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776252, (-158,305), root:(878,360),
state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776307, (-158,305), root:(878,360),
state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776962, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1777014, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
and my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "uk"
Option "XkbOptions" "grp:ctrl_shift_toggle"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "139f"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "AGPMode" "8"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "UseFastTLS" "2"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 [Mobility FireGL 9000]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "DontVTSwitch" "False"
Option "DontZap" "False"
EndSection -
Ctrl-Alt in TOC cannot find file
I created a book with a cover page, a copyright, and a chapter, and added a TOC. It generated fine. But when I save as PDF, the table of contents in the PDF is not live. The cursor points to an item, but when you click it, nothing happens.
I checked the Frame TOC. When I hold Ctrl-alt, the cursor turns to a hand pointer and I can click on the entry. Then an error message appears that "Cannot find xxx file." The name of the file it lists is exactly the name of the chapter file. The chapter file is still exactly where it was when I created the book. All the files are in the same directory.
Anyone have any ideas?Arnis,
I moved the cover, copyright, and chapter to a whole new directory. I created a new book and saved it into the new directory with the files. I
Added a new TOC, making sure that the hypertext links option was checked.
I tested one of the links. It still says "Can't find xxx/xxx.fm file." although the path and file that it lists is now the new path and file.
Guess something is really messed up somewhere :-). So far, I've copied all the chapter text into a completely new file, saved it as MIF, and reopened it in Frame. I've moved the files to a new directory. I've created brand-new TOCs. I'm not sure what more to do, unless recreate the content of the chapter from scratch in case it has something wrong with it?
Regards,
jh- -
Cannot select layer via CTRL + ALT
Hi,
If memory serves me right, in CS3 I was able to ctrl + alt click the layer while using the brush tool. I can no longer do that in CS4. To do it, I first have to click on the selection tool, then ctrl + alt click on an image to select it's corresponding layer, which is not a time saver. In any case, am I doing something wrong or need to enable some feature? Many thanks in advance.CS4 has a new way of doing this, without changing tools permanently.
Carefully press and hold the V key on your keyboard. Whilst holding the V key, hold down the Control key. This shortcut will auto-select layers regardless of what tool you are using. When you release the V key, it will go back to whatever tool you had selected before.
They changed this, to accomodate the new brush resizing shortcut. Its hard when these habits become second nature, and most keyboard shortcut changes recently are honestly not very well thought out. But the new brush resizing shortcut is so essential that for once, its a worthwhile move. -
We have several machines that have exhibited this behavior so far. Once they get into this state, the only option is to reboot. They are HP ProLiant BL460c G7 blades.
The behavior exhibited is:
You can no longer RDP to the machine. It just eventually times out.
Console access via iLO shows what you'd expect, asking for CTRL+ALT+DEL, but when you press that, it just goes to the dark blue screen with "Windows Server 2012 R2" written at the bottom and doesn't go further.
There doesn't seem to be any unusual notes in the System Log that I can see.I've also read the support article that you linked, but that seems to suggest that there is always a problem with RDP and in this case the server gets to a point where it is stuck and requires a reboot to clear.
Hi Mitch,
For the above line of yours seems there is some misunderstanding, as nowhere in the link provided it suggest to restart\reboot the server. But instead need to check the certificate related scenario.
Can you ping the destination server when you can’t perform RDP?
Now for more troubleshooting you can choose performance monitor and can see what is effecting, for that you can go through beneath article.
Troubleshooting Server Hangs - Part One
http://blogs.technet.com/b/askperf/archive/2007/09/25/troubleshooting-server-hangs-part-one.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Message says that Firefox needs to close. It does not appear to be running even when the "Taskmaster" (Ctrl-alt-delete) is displayed. The message says to close Firefox or reboot my computer. It happens constantly, even though I have closed Firefox, already. It appears to happen most often when I reach a page that refuses to respond to any mouse clicks, although, I can close the page (x). I, then, I cannot open Firefox until I reboot.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs -
[Solved] Ctrl + Alt + F[1-6] -- no signal on display
02/04/13 I made a full system update. When turned off my PC, I noticed that screen is turned off before the system is actually halted. Well, this didn't made me suspicious.
However, today I decided to make a full update with new KDE. I thought that it'd be rational to do it from the virtual console but pressing ctrl + alt + Fx causes my monitor to turn off. Have I missed something?
[mk@linux ~]$ systemctl list-units --type=target
UNIT LOAD ACTIVE SUB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
printer.target loaded active active Printer
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
13 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[mk@linux ~]$ pacman -Qs nvidia
local/lib32-nvidia-304xx-utils 304.84-1
NVIDIA drivers utilities and libraries. (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.6-1
Nvidia VDPAU library
local/nvidia-304xx 304.84-1
NVIDIA drivers for linux, 304xx legacy branch
local/nvidia-304xx-utils 304.84-1
NVIDIA drivers utilities and libraries, 304xx legacy branch
Last edited by mkkot (2013-04-07 17:31:25)It's a known problem with the nvidia 304.84 driver; so update it to 304.88 and from some users' testimonies it should work again. (I use nouveau presently so I cannot say myself).
-
Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate
Ctrl+Alt+F2 doesn't seem to register. It's been a long term issue I have had for years. I've tried all the various fixes.
I can manually change to virtual terminals without issues using:
sudo chvt 2
Once I'm in a VT I can use Alt+Fx to change between them, until I go back into Xorg. So it's unlikely to be a graphics driver problem, most other people with similar issues complain of getting a blank screen.
Although without sudo I get
# chvt 2
Couldn't get a file descriptor referring to the console.
I have the following in /etc/X11/xorg.conf.d/15-forcevt.conf
Section "ServerFlags"
Option "HandleSpecialKeys" "always"
Option "DontVTSwitch" "false"
Option "DontZap" "false"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
A also enabled the terminate option in gnome-tweak-tool.
xmodmap -pke has the following:
keycode 67 = F1 F1 F1 F1 F1 F1 XF86Switch_VT_1
keycode 68 = F2 F2 F2 F2 F2 F2 XF86Switch_VT_2
Nothing is printed in Xorg logs when I try pushing the keys.
I'm using SLIM (although I tried manually via startx), AwesomeWM (also tried fluxbox with a blank conf), nvidia (proprietary), UEFI.
[ 2490.220]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 2490.225] X Protocol Version 11, Revision 0
[ 2490.227] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 2490.229] Current Operating System: Linux ender 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 2490.229] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=ff84efeb-e43f-47fe-a14d-07894feb0013 rw rootflags=subvol=@ quiet
[ 2490.233] Build Date: 14 March 2015 06:45:50PM
[ 2490.234]
[ 2490.236] Current version of pixman: 0.32.6
[ 2490.240] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2490.240] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2490.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 10:44:03 2015
[ 2490.249] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2490.250] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2490.250] (==) ServerLayout "Layout0"
[ 2490.250] (**) |-->Screen "Screen0" (0)
[ 2490.250] (**) | |-->Monitor "Monitor0"
[ 2490.251] (**) | |-->Device "Device0"
[ 2490.251] (**) |-->Input Device "Keyboard0"
[ 2490.251] (**) |-->Input Device "Mouse0"
[ 2490.251] (**) Option "DontVTSwitch" "false"
[ 2490.251] (**) Option "DontZap" "false"
[ 2490.251] (**) Option "Xinerama" "0"
[ 2490.251] (==) Automatically adding devices
[ 2490.251] (==) Automatically enabling devices
[ 2490.251] (==) Automatically adding GPU devices
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2490.251] Entry deleted from font path.
[ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2490.251] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2490.251] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2490.251] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2490.251] (WW) Disabling Keyboard0
[ 2490.251] (WW) Disabling Mouse0
[ 2490.251] (II) Loader magic: 0x815d80
[ 2490.251] (II) Module ABI versions:
[ 2490.251] X.Org ANSI C Emulation: 0.4
[ 2490.251] X.Org Video Driver: 19.0
[ 2490.251] X.Org XInput driver : 21.0
[ 2490.251] X.Org Server Extension : 9.0
[ 2490.254] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2490.254] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2490.254] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2490.258] (--) PCI:*(0:1:0:0) 10de:1180:10de:0969 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 2490.258] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2490.258] (II) LoadModule: "glx"
[ 2490.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2490.268] (II) Module glx: vendor="NVIDIA Corporation"
[ 2490.268] compiled for 4.0.2, module version = 1.0.0
[ 2490.268] Module class: X.Org Server Extension
[ 2490.268] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 2490.268] (II) LoadModule: "nvidia"
[ 2490.268] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2490.269] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2490.269] compiled for 4.0.2, module version = 1.0.0
[ 2490.269] Module class: X.Org Video Driver
[ 2490.269] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 2490.269] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2490.269] (++) using VT number 1
[ 2490.269] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2490.269] (II) Loading sub module "fb"
[ 2490.269] (II) LoadModule: "fb"
[ 2490.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2490.269] (II) Module fb: vendor="X.Org Foundation"
[ 2490.269] compiled for 1.17.1, module version = 1.0.0
[ 2490.269] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.269] (II) Loading sub module "wfb"
[ 2490.269] (II) LoadModule: "wfb"
[ 2490.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2490.270] (II) Module wfb: vendor="X.Org Foundation"
[ 2490.270] compiled for 1.17.1, module version = 1.0.0
[ 2490.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2490.270] (II) Loading sub module "ramdac"
[ 2490.270] (II) LoadModule: "ramdac"
[ 2490.270] (II) Module "ramdac" already built-in
[ 2490.270] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2490.270] (==) NVIDIA(0): RGB weight 888
[ 2490.270] (==) NVIDIA(0): Default visual is TrueColor
[ 2490.270] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2490.270] (**) NVIDIA(0): Option "Stereo" "0"
[ 2490.270] (**) NVIDIA(0): Option "SLI" "Off"
[ 2490.270] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 2490.270] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 2490.270] (**) NVIDIA(0): Stereo disabled by request
[ 2490.270] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 2490.270] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 2490.271] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +1280+0, DVI-D-0: nvidia-auto-select +0+416"
[ 2490.271] (**) NVIDIA(0): Enabling 2D acceleration
[ 2490.690] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 2490.692] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680 (GK104) at PCI:1:0:0 (GPU-0)
[ 2490.692] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 2490.692] (--) NVIDIA(0): VideoBIOS: 80.04.09.00.01
[ 2490.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2490.709] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:1:0:0
[ 2490.709] (--) NVIDIA(0): CRT-0
[ 2490.709] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0) (boot, connected)
[ 2490.709] (--) NVIDIA(0): DFP-1
[ 2490.709] (--) NVIDIA(0): DFP-2
[ 2490.709] (--) NVIDIA(0): Samsung SyncMaster (DFP-3) (connected)
[ 2490.709] (--) NVIDIA(0): DFP-4
[ 2490.709] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SMS27A850T (DFP-0): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): Samsung SyncMaster (DFP-3): Internal TMDS
[ 2490.710] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-3): 330.0 MHz maximum pixel clock
[ 2490.710] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 2490.710] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 2490.710] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.710] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2490.710] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2490.710] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 2490.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2490.712] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2490.712] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2490.713] (II) NVIDIA(0): Validated MetaModes:
[ 2490.713] (II) NVIDIA(0):
[ 2490.713] (II) NVIDIA(0): "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.713] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1440
[ 2490.742] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 2490.742] (--) NVIDIA(0): option
[ 2490.742] (--) Depth 24 pixmap format is 32 bpp
[ 2490.743] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2490.743] (II) NVIDIA: access.
[ 2490.746] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2490.746] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2490.746] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2490.746] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2490.746] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2490.746] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2490.746] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2490.746] (II) NVIDIA(0): Config Options in the README.
[ 2490.761] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
[ 2490.853] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2490.853] (==) NVIDIA(0): Backing store enabled
[ 2490.853] (==) NVIDIA(0): Silken mouse enabled
[ 2490.853] (**) NVIDIA(0): DPMS enabled
[ 2490.853] (II) Loading sub module "dri2"
[ 2490.853] (II) LoadModule: "dri2"
[ 2490.853] (II) Module "dri2" already built-in
[ 2490.853] (II) NVIDIA(0): [DRI2] Setup complete
[ 2490.853] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2490.853] (--) RandR disabled
[ 2490.856] (II) Initializing extension GLX
[ 2490.856] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 2490.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.914] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.914] (II) LoadModule: "evdev"
[ 2490.914] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2490.914] (II) Module evdev: vendor="X.Org Foundation"
[ 2490.914] compiled for 1.17.1, module version = 2.9.2
[ 2490.914] Module class: X.Org XInput Driver
[ 2490.914] ABI class: X.Org XInput driver, version 21.0
[ 2490.915] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 2490.915] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.915] (**) Power Button: always reports core events
[ 2490.915] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 2490.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.915] (--) evdev: Power Button: Found keys
[ 2490.915] (II) evdev: Power Button: Configuring as keyboard
[ 2490.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[ 2490.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2490.915] (**) Option "xkb_rules" "evdev"
[ 2490.915] (**) Option "xkb_model" "pc104"
[ 2490.915] (**) Option "xkb_layout" "us"
[ 2490.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.940] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2490.940] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2490.940] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 2490.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[ 2490.941] (II) Using input driver 'evdev' for 'Power Button'
[ 2490.941] (**) Power Button: always reports core events
[ 2490.941] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2490.941] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2490.941] (--) evdev: Power Button: Found keys
[ 2490.941] (II) evdev: Power Button: Configuring as keyboard
[ 2490.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
[ 2490.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2490.941] (**) Option "xkb_rules" "evdev"
[ 2490.941] (**) Option "xkb_model" "pc104"
[ 2490.941] (**) Option "xkb_layout" "us"
[ 2490.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.942] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 2490.942] (II) No input driver specified, ignoring this device.
[ 2490.942] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[ 2490.943] (II) No input driver specified, ignoring this device.
[ 2490.943] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[ 2490.944] (II) No input driver specified, ignoring this device.
[ 2490.944] (II) This device may have been added with another device file.
[ 2490.944] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event0)
[ 2490.944] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.944] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.944] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 2490.944] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.944] (**) HID 1017:0002: always reports core events
[ 2490.944] (**) evdev: HID 1017:0002: Device: "/dev/input/event0"
[ 2490.945] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.945] (--) evdev: HID 1017:0002: Found keys
[ 2490.945] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.945] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.0/0003:1017:0002.0001/input/input2/event0"
[ 2490.945] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 8)
[ 2490.945] (**) Option "xkb_rules" "evdev"
[ 2490.945] (**) Option "xkb_model" "pc104"
[ 2490.945] (**) Option "xkb_layout" "us"
[ 2490.945] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.945] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event1)
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev pointer catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
[ 2490.945] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 2490.946] (II) Using input driver 'evdev' for 'HID 1017:0002'
[ 2490.946] (**) HID 1017:0002: always reports core events
[ 2490.946] (**) evdev: HID 1017:0002: Device: "/dev/input/event1"
[ 2490.946] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
[ 2490.946] (--) evdev: HID 1017:0002: Found 9 mouse buttons
[ 2490.946] (--) evdev: HID 1017:0002: Found scroll wheel(s)
[ 2490.946] (--) evdev: HID 1017:0002: Found relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found x and y relative axes
[ 2490.946] (--) evdev: HID 1017:0002: Found absolute axes
[ 2490.946] (II) evdev: HID 1017:0002: Forcing absolute x/y axes to exist.
[ 2490.946] (--) evdev: HID 1017:0002: Found keys
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as mouse
[ 2490.946] (II) evdev: HID 1017:0002: Configuring as keyboard
[ 2490.946] (II) evdev: HID 1017:0002: Adding scrollwheel support
[ 2490.946] (**) evdev: HID 1017:0002: YAxisMapping: buttons 4 and 5
[ 2490.946] (**) evdev: HID 1017:0002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.1/0003:1017:0002.0002/input/input3/event1"
[ 2490.946] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 9)
[ 2490.946] (**) Option "xkb_rules" "evdev"
[ 2490.946] (**) Option "xkb_model" "pc104"
[ 2490.946] (**) Option "xkb_layout" "us"
[ 2490.946] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.946] (II) evdev: HID 1017:0002: initialized for relative axes.
[ 2490.946] (WW) evdev: HID 1017:0002: ignoring absolute axes.
[ 2490.946] (**) HID 1017:0002: (accel) keeping acceleration scheme 1
[ 2490.946] (**) HID 1017:0002: (accel) acceleration profile 0
[ 2490.946] (**) HID 1017:0002: (accel) acceleration factor: 2.000
[ 2490.946] (**) HID 1017:0002: (accel) acceleration threshold: 4
[ 2490.946] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/mouse0)
[ 2490.946] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
[ 2490.946] (II) No input driver specified, ignoring this device.
[ 2490.947] (II) This device may have been added with another device file.
[ 2490.947] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event2)
[ 2490.947] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 2490.947] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
[ 2490.947] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.947] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event2"
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found 20 mouse buttons
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found x and y relative axes
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.947] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0003/input/input4/event2"
[ 2490.947] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: MOUSE, id 10)
[ 2490.947] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/mouse1)
[ 2490.948] (II) No input driver specified, ignoring this device.
[ 2490.948] (II) This device may have been added with another device file.
[ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event3)
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev keyboard catchall"
[ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "Keyboard Defaults"
[ 2490.949] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
[ 2490.949] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
[ 2490.949] (**) Logitech G9x Laser Mouse: always reports core events
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event3"
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found 1 mouse buttons
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing relative x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found absolute axes
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing absolute x/y axes to exist.
[ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found keys
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as keyboard
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2490.949] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0004/input/input5/event3"
[ 2490.949] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: KEYBOARD, id 11)
[ 2490.949] (**) Option "xkb_rules" "evdev"
[ 2490.949] (**) Option "xkb_model" "pc104"
[ 2490.949] (**) Option "xkb_layout" "us"
[ 2490.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.949] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
[ 2490.949] (WW) evdev: Logitech G9x Laser Mouse: ignoring absolute axes.
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
[ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
[ 2490.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[ 2490.949] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.949] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.950] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
[ 2490.950] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.950] (**) USB Keyboard: always reports core events
[ 2490.950] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[ 2490.950] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.950] (--) evdev: USB Keyboard: Found keys
[ 2490.950] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:04D9:0274.0005/input/input6/event4"
[ 2490.950] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
[ 2490.950] (**) Option "xkb_rules" "evdev"
[ 2490.950] (**) Option "xkb_model" "pc104"
[ 2490.950] (**) Option "xkb_layout" "us"
[ 2490.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.951] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[ 2490.951] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2490.951] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 2490.951] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[ 2490.951] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 2490.951] (**) USB Keyboard: always reports core events
[ 2490.951] (**) evdev: USB Keyboard: Device: "/dev/input/event5"
[ 2490.951] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
[ 2490.951] (--) evdev: USB Keyboard: Found 1 mouse buttons
[ 2490.951] (--) evdev: USB Keyboard: Found scroll wheel(s)
[ 2490.951] (--) evdev: USB Keyboard: Found relative axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing relative x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found absolute axes
[ 2490.951] (II) evdev: USB Keyboard: Forcing absolute x/y axes to exist.
[ 2490.951] (--) evdev: USB Keyboard: Found keys
[ 2490.951] (II) evdev: USB Keyboard: Configuring as mouse
[ 2490.951] (II) evdev: USB Keyboard: Configuring as keyboard
[ 2490.951] (II) evdev: USB Keyboard: Adding scrollwheel support
[ 2490.951] (**) evdev: USB Keyboard: YAxisMapping: buttons 4 and 5
[ 2490.951] (**) evdev: USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2490.951] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.1/0003:04D9:0274.0006/input/input7/event5"
[ 2490.951] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 13)
[ 2490.951] (**) Option "xkb_rules" "evdev"
[ 2490.951] (**) Option "xkb_model" "pc104"
[ 2490.951] (**) Option "xkb_layout" "us"
[ 2490.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.952] (II) evdev: USB Keyboard: initialized for relative axes.
[ 2490.952] (WW) evdev: USB Keyboard: ignoring absolute axes.
[ 2490.952] (**) USB Keyboard: (accel) keeping acceleration scheme 1
[ 2490.952] (**) USB Keyboard: (accel) acceleration profile 0
[ 2490.952] (**) USB Keyboard: (accel) acceleration factor: 2.000
[ 2490.952] (**) USB Keyboard: (accel) acceleration threshold: 4
[ 2490.952] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Defaults"
[ 2490.952] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
[ 2490.952] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 2490.952] (**) Eee PC WMI hotkeys: always reports core events
[ 2490.952] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 2490.953] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 2490.953] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 2490.953] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input12/event9"
[ 2490.953] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[ 2490.953] (**) Option "xkb_rules" "evdev"
[ 2490.953] (**) Option "xkb_model" "pc104"
[ 2490.953] (**) Option "xkb_layout" "us"
[ 2490.953] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 2490.953] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 2490.953] (II) No input driver specified, ignoring this device.
[ 2490.953] (II) This device may have been added with another device file.
[ 2491.022] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.022] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
[ 2491.022] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2491.034] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
[ 2491.034] (**) NVIDIA(0): has been enabled on all display devices.)
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
[ 2491.034] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
Last edited by H3g3m0n (2015-04-01 00:11:52)WonderWoofy wrote:I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?
I tried setxkbmap before without success.
Also tried:
localectl set-x11-keymap "us" "" "" "terminate:ctrl_alt_bksp"
Not sure how to go about using loginctl to do the same thing.
Last edited by H3g3m0n (2015-04-01 03:25:35)
Maybe you are looking for
-
How to include Query extractor in process chain
Hi All, According to th requirement I have created Query Extractor using RSCRM_BAPI to upload Query data to application server. Now it has to be included in PROCESS CHAIN. Is there any way to include Query Extractor in process chain. Or is there any
-
No completed in reminders on mbp
my iphone has a completed list and so does my reminders on my work mbp but there is no completed list on my mbp at home and I can't figure out how to get it even though all my other lists are there. Any ideas? thanks in advance
-
Cisco ISE Guest portal - smart card login
Does anyone know if Cisco ISE support smart card login to the guest portal page?
-
FileInfo.Delete method appears to run in background
My app is set up to delete output file before regenerating them. It appears that the delete operation is running on a basckground thread. I am not certain what is happening but here is what I do know. If the process to create the data to be written
-
Someone PLEASE, PLEASE, PLEASE tell me that BB did not remove the CALL LOG feature (that was on the Torch)! This is HORRIBLE!!! If I wanted a phone that did not allow me to be productive, I would have activated my iPhone!!! PLEASE BRING THE CALL LO