Once made a selection in photoshop how do you export in Illustrator and use it with a cutting plotte

once made a selection in photoshop how do you export in Illustrator and use it with a cutting plotter?

Plotters require continuous paths. Convert the selection to a path and clean it up suitably. Copy&paste it to Illustrator and use it as a clipping mask on your artwork or whatever. You may also need to create a duplicate layer/ separate PDF file file. Talk to the people doing the plotting.
Mylenium

Similar Messages

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

How do you export 4 discrete mono audio tracks with video from Adobe Premiere Pro 4/Adobe Encoder?

I've posted this question in different terms a few times and have not had an answer. I can't find the answer on the Premiere Pro support site either (which makes me think that a simple solution doesn't exist)
We use adobe premiere pro 4. We capture DVCAM tapes with 4 discrete audio channels. When we export the video using adobe encoder, the result is stereo tracks with the discrete audio channels mixed together which is completly useless to us. When I select Mono for the output settings, two channels of audio are mixed into one audio channel. Also useless.
When capturing the clip, we always use the mono timeline and modify the clips to mono. We can edit the discrete audio channels but when we export the video, the audio is mixed down.
this is the problem. Each of our 4 audio channels contain a different language of dialogue. When exported, these 4 get mixed down to 2 mixed channels blending of course the language.
Can Premiere Pro 4 export discrete mono audio channels? How do you do it?
Does version 6 have the ability to export 4 discrete mono channels?

Hi Steve,
Important info is missing from your post - what format are you wanting to export to, and for what purpose? We need to know how the exported file is intended to be used. Who's going to view it, using what gear? Is it for another editor to work with? End user viewing?
Thanks
Jeff Pulera
Safe Harbor Computers

How do you export logic projects, and into soundcloud without ruining any quality?

I export a song, and it lost alot of volume. I found a way around that by adding adaptive limiter to the entire mix. It helped alot. Now I post it to soundcloud and then some of the instruments quality degrade. And when i play it in iTUNES or even the finder window, it is how i want it to sound. When I hear it on soundcloud, its quality and volume degrades. Is there a way around this???
please help! Thanks!

Just to clarify before I make any suggestions is that what most DAWs call exporting isn't called exporting in Logic, it's called Bounce. If you use the export command in Logic it will give you seperate WAV files for each track and .midi files for any midi tracks you have in your project. The Bounce command is right below the export command in the file menu, though.
The settings you choose when bouncing really depends on your preferences and how big of a file you care to have. If you have no mastering or mixing left to do you should choose PCM saved as WAV or AIFF (I'm honestly not sure of the pros and cons of the two), but you can bounce the project as more than one file format at once so you don't really have to choose only one.
If you bounce to an MP3 go ahead and choose the highest settings which I believe is 320CBR (320 constant bitrate). You can also bounce as AAC, which I prefer because Apple Lossless results in a fairly small file (compared to WAV) while maintaining good quality. You can also manage the file's metadata from this menu so your ID3 tags are good to go.
Like I said it's really up to your preferences and what you are going to use the file for.

How do you unsync your phone and sync it with another computer without losing any data?

How do you unsync your iphone, without loosing any of the music etc? As I have a new laptop and my old laptop is not working.

You need to transfer the data from your old computer to your new computer. Surely you have a backup of your old laptop. Use this and move your data to your new laptop.

In photoshop, how do you make a background a solid color?

In photoshop, how do you make a background a solid color?

Select all then edit fill is one way.
However if you mean the background behind a subject you need to separate the subject from its background the change just the background. Look for tutorials on replacing background and extracting subjects

How do you "dodge" or "burn" light using Photoshop Element 11?

How do you "burn" or "dodge" light using Photoshop Element 11?

Select the Burn Tool, choose your settings then click and drag over the area you want to affect.
From the Options you can choose from Sponge, Dodge & Burn.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

HT204216 Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Used to highlight just the portion of an article that I wanted to print and press print selection only. How do you do that with a MAC?

Depends to some extent what application you're printing from, and what printer you're using, but here's the dialogue box for ⌘P in Firefox -
Note the option to print selection only.
Haven't looked before, but I can't find anything similar in Pages print options.
It does appear in Word though.
Message was edited by: noondaywitch

How can you export a clip selection from FCPX to motion? Round tripping?

How do you export a clip selection out of FCP into Motion? In Motion, you have the option of exporting a selection out of motion? I don't understand why FCPX does not have this functionality. I do not want to export an effect or transition. FCPX is good, but it looks like the application team have no clue about workflows. Especially integration between FCP and Motion.

Not sure if you are asking a question or having a rant .. also not sure what your point is about it being 2013 ? Roundtripping is not in these apps .. sold for very little (relative to FCS which did roundtripping) and most of the functionality used daily from Motion is now in FCPX in one way or another. Perhaps it would be a 'handy' but to highlight this as some BIG deal is a tad missing the point ... .
What exactly is it you cannot do in FCPX and need to send to Motion to work on ?
These may help you with the basics of new compound clips ...
http://play.macprovideo.com/finalcutprox103-editing-in-the-magnetic-timeline/1
http://www.youtube.com/watch?v=lZdjTtF8Qqo
Jim

Hi, Haven't used bridge in a while. How to you export a selected group of images to a contact sheet?

Hi, Haven't used bridge in a while. How to you export a selected group of images to a contact sheet?

Exact version? Platform?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do you export messages from Ovi Suite?

As the title says, how do you export messages from Ovi Suite?
I know how to export messages from Nokia PC Suite, but it doesn't seem to be possible in the new Nokia Ovi Suite.
Here is how I would do it in the Nokia PC Suite.
1. I click the Messages icon to open Nokia Communication Center.
2. I click on the Messages option on the left pane to view only messages.
3. In the main window I mark the messages I want to export.
4. Then I go to File menu and chose Export.
5. Choose destination folder and I'm all set to export my messages from my Nokia.
I can chose between the formats CSV and VMG (vMessage) for export. If more than one message is marked only the CSV format is available. But what you can do to export several messages in the VMG format is to mark them all in the main window and press CTRL+C or right click and chose Copy to copy them all to RAM memory. Then all you have to do is create an empty folder on the desktop and paste them in there by pressing CTRL+V or right clicking and chosing Paste.
That's all there is to it, using Nokia PC Suite. So how do you do this in Nokia Ovi Suite? You don't, right?
And this **bleep** Ovi Suite is supposed to replace PC Suite?
Thank God I won't be needing neither of them much longer. I am switching to Android and HTC. Good luck with Ovi, the Ovi Player, the Ovi Suite, the PC Suite, the Symbian, the S60, the Symbian^1 (S60 5th edition), the Symbian^3, the Symbian^4 and what not.

I believe OVI took a step in the right direction with this option. I also believe it was made available due to the fact that OVI Suite cannot take a huge number of messages altogether. This option was made available so that the messages could be backed up.
However, I'd like to suggest the following, if possible.
1. Make Nokia OVI Suite be able to handle a huge number of messages.
2. Have the option to export only selected messages.
Nokia 701 Dark Steel on Belle FP2

How do you get the time and weather to appear on your screen at all times?

I was told you can easily do that just as shown on the photo they have of the Droid Incredible on there wireless phone purchase page.
Anyone know how to do this and can recommend the app to do this also. I tried installing an app that said it is installed but I can't find it on my phone either. Thx.

gardengirls wrote:
Hi, I ended up installing the one you suggested but how to you get it up and running. I have an icon but I can't figure out what to do with it now. I thought it would just show up automaticaly.....
Go to page you want to add item to and press and hold, select widgets from list and scroll and select Beautiful Home and this will give you the clock on thay page... You also have a number of extras widgets you can choose from in list... Also you can press and hold on item once on page a move them around on page where you want.
Let me know if you need more help and I will see what I can do..

How do you get a word and character count of a document in Pages for Mavericks

How do you get a word and character count of a document in Pages for Mavericks?

Hi jonathan,
I struggled with this one as well, as i'm finishing up a PhD thesis and word counts are incredibly important. Through trial and error i found out that words like 'e.g.' and 'i.e.' count as two words and an ampersand (&) doesn't count at all. That being said, i didn't like the fact that the word count always included footnotes and i was dismayed that i couldn't get an accurate count of words in the main body of my text. That all disappeared yesterday when, by chance, while i was copying a completed chapter and pasting it into my main document, i discovered that Pages can indeed give you an accurate word count excluding the footnotes! Here's all you need to do:
1. In pages 5.2, make sure that the Word Count function is first enabled by selecting View --> Show Word Count from the Pages Menu Bar. (If it's already enabled, it will read View --> Hide Word Count, so if that's what it says, then no need to do anything.)
2. Once enabled, check the Word count that's currently showing at the bottom of the page. That's the word count including your footnotes.
2. Now, place your cursor anywhere within the current document, then hit command+A (for Select All).
3. Viola! Your word count now shows the actual number of words within the body of the text only, excluding footnotes!
Hope that helps!

How do you put safari web pages into icloud with the safari iCloud button?

how do you put safari web pages into icloud with the safari iCloud button?

What that button does is sync your tabs between your devices. So if you have multiple macs with Mountain Lion and/or devices with iOS 6 (once it comes out this fall) you can pick up where you left off. For example, let's say I have apple.com, nytimes.com, and facebook.com open on my mac, but I need to run. Later, if I need to use another computer in my household, I can just restore the tabs that I was using before on this other mac.

How do you get multiple screens on the iPad with iOS 5.1.1?

How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
One more thing: We are only talking about Safari.

Guitaristica-
I don't think I've seen a way to have separate Safari screens visible at the same time. The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
Fred

Once made a selection in photoshop how do you export in Illustrator and use it with a cutting plotte

Similar Messages

Maybe you are looking for