Once object code is compiled and converted to a CIN, how do you view the original c code?

I am editing a VI written a few years ago, and I want to view the c code referenced by a CIN. I cannot find this original c code, so I want to know if Labview can allow me to find and view the native c code. Any suggestions?

If the original C code is gone, then there's not much you can do. It's really no different then trying to view the original C/C++ code of an exe that you have like Excel.

Similar Messages

TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones a

Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?

only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.

In Pages, what do you do when converting to Word and get "unknown error occurred" How can you fix the conversion?

Can anybody help me. In Pages how can I deal with "unknown error occurred" when converting to Word?

Thanks for you suggestion roaminggnome. I tried typing in 13019 like you said and it gave me a few options to try and fix it but none of them worked (of course). I fiddled around with it for a while some more on my own and some how got it to work again, lol. Thanks again though for offering a solution.

I turned my 5s phone off and when I turned it back on it seems to have lost my pass code and won't unlock . How do you reset the pass code

I have a 5S it lost my passcode when I turned it off for about 10 minutes.Phone is now locked
How do I reset the passcode?

Hello Lynncooper,
It sounds like your passcode is not working for some reason to unlock your phone. This article should help you get back into your device:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
When the backup and sync is complete, restore your device.
When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
Select your device in iTunes and choose the most recent backup of your device.
If you have not synced to your iTunes library, follow the steps in the section labeled:
If you have never synced your device with iTunes, or you do not have access to a computer
Thank you for using Apple Support Communities.
Regards,
Sterling

Hey I just got a Mac book pro and have an I-phone how do you sync the mail on the computer with the mail in the phone?? I ask because once I delete the messages on the computer try aren't deleting on the phone and vice versa so I wind up reading 2x

Any help?

You may already have one. E-mail servers provide support for POP or IMAP, and sometimes both. How you access the account depends on how you set it up on your device. You'll need to check with your e-mail provider and see if they support accessing your account via IMAP. If they do, you'll need to re-create the account on both the Mac and the iPhone to use the IMAP settings instead of the POP settings. (Note that when you delete a POP account, all e-mail in the In box will be deleted. Move any e-mail you don't want to lose into an "On My Mac" mailbox on the Mac beforehand.)
Also, if you have set the iPhone to sync e-mail messages in iTunes, turn that off. You won't need that with IMAP.

I ordered several downloads on iTunes and one of the song says I authorized on 5 computers and that is false. How do you get the song to play?

iTunes
How do you get a download to play if the song says you have downloaded it on 5 computers? I don't even own 5 computers. This is my first expierience with iTunes dowloads.

See iTunes Store: About authorization and deauthorization, http://support.apple.com/kb/HT1420
Also check One computer using multiple iTunes Store authorizations, http://support.apple.com/kb/HT1206

How do you view the info stored on icloud, ie txt as there seems to be no way to view the backed up info aprt from photos and contacts

How are you suppsed to view the information backed up on icloud, ie txt as there semms to be no option apart from contacts and photo or iwork

Nevermind. I had lunch and when I came back most of my changes were there. Thanks anyway!

I have an iPhone 4S with a smudge or smear under the front glass screen and a cracked backplate. How do you fix the front screen? HELP!!

How do You fix a iPhone 4S with a smudge under the front screen and a shattered backplate?

You can purchase replacement parts from a third-party vendor, or a replacement iPhone from Apple. If you choose the former, there are many online videos to assist you with the teardown and repair.

TS2446 My apple ID changed on my iPhone and is now incorrect. How do you change the ID (not the password)

My apple ID changed on my iPhone and is now incorrect. How do I retrieve my ID, NOT password?

Hi Barcelona,
Where is this occurring? Have you signed your new Apple ID into the iTunes & App Store, iCloud, Messages, etc.? Is it coming up when you are trying to update apps? Can you provide a little more info?
Cheers,
GB

Once you delete a second partition on your hard drive and there is only blank space how do you enlarge the original "Macintosh HD" to cover the entire hard drive space?

I just delete a partition on my drive and wanted to 1 either enlarge my original partition to cover the entire space, or 2 create a new partition in the free space. The problem is when I attempt to drag down the Macintosh HD partition and hit apply nothing happens. When i try to partition the free space (80 gigs) I hit apply and the new partition is only 200 mb with the 79 gigs still free space... HELP PLEASE.

Ah...so you've now learned why it's best not to change your mind after partitioning the bootup volume.
As far as I know, there's no "built-in" way to recover the free space after deleting a partition.
You're probably looking at third party software to accomplish what you're looking for. Here's one:
http://www.drivetoolbox.com/volume-manager.php
I can't speak to how well it works....I've never used it. But, according to the site, it will do what you need it to do.
I hope this helps.

How do you get the trade in code for the $100 gift card?

On January 28, I activated a Samsung S4 that I had mail ordered from Verizon Wireless. I went to the online chat service to find out about the $100 trade in for my functioning Moto Bionic, and after some back and forth, was told that they could not help me and I had to call customer support.
I generally prefer not to call because of the waiting time, but on several of my calls on this I have actually gotten through fairly quickly (i.e. under five minutes of wait). So, on the first call, I was told to fill out the form on the trade in page using the code "Smart100" where required the online form. The "Smart100" code did not work (and I tried various permutations, including initial cap, initial non-cap, space, no space, underscore_connect, all with no success).
I called back to inquire why "Smart100" did not work, and after the CSR explained case sensitivity to me (and I explained all the permutations that I had already run through before calling back), we agreed that Smart100 was just not going to work. She then went to find further information. She returned to the line to advise me that, indeed, Smart100 would not work, but that Verizon would send my phone a text of the code to enter on the trade in page within five calendar days of activation of the new phone.
I called on the sixth day, and I spoke to another CSR. She told me that the five calendar days was inaccurate, and the code would arrive on my phone within five business days.
I waited until COB on the fifth business day , and called again. However, the CSR (accurately) pointed out out that it was not yet midnight, and the code would surely arrive that evening.
Unfortunately, I still (some 2 1/2 weeks after activation) do not have the code. I have decided to try a different approach, to wit, a posting here.
Suggestions?

For whatever it's worth, I received an email back in the same day from the "Wireless Device Recycling Team" with a code that went through. I am not sure who the Recycling Team is, but this was a very positive experience after the frustrations of talking and chatting with CSR's who, while trying hard, were not well informed about this particular issue, so hats off to the Recycling Team.

Extrude and bevel banding... how do you make the gradient smooth?

Hi,
I've got a shape that I want to make 3D using extrude and bevel tool but despite making the blend steps the highest possible amount, I still have banding. I'm using CS6. And there's no gradient on the flat image (it began as white). Any ideas?

OMG! Just tried Object>Path>Simplify and it worked! This is the result which I am much happier with:

How do you change the FILE "print code" resulting printed font size?

I would like to adjust the "Print Code" resulting printed document font size. Though the changes can be made in display font for the Code window via a file or the Preferences Menu, I cannot find the style information to change the Print Code.
Thanks

Thanks again for your reply.
I would like the code print out font to be a smaller size. Currently, it ls printing at 12 pt Monaco ( I can emulate this exactly by printing the same document in an editor set as Monaco 12pt ). However, the settings (see below) are set at Monanco 9pt. This works on the screen, but not for printing.
http://goo.gl/eXhnz > screenshot of Setting show "smallest".
Yet the code:print gives me more characters per line, resulting in many more pages per printout. The "print preview" shown in my last message is exactly what the printed page looks like as well.
NOTE: with the same settings ("smallest Monaco 9pt), Dreamweaver CS3 on OSX *does* code:print the smaller size, though without color coding. Dreamweaver CS 5 on my system does not.
Thank you.
Jay

How do you make the magic Applescript code box in Discussions?

Sorry, but I have no idea how.

testing script:
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">--Getting the names of the players and the number
--Bug: Names can't have spaces
set playerList to {}
set nOp to (text returned of (display dialog "Number of Players (2-8):" default answer "8")) as number
set temp1 to text returned of (display dialog "Name of Player 1" default answer "")
set the end of playerList to temp1
--This next part is prep for the subroutine
set player1 to ""
-- end prep for subroutine (every other set playerX clause exists for the same reason)
set temp2 to text returned of (display dialog "Name of Player 2" default answer "")
set the end of playerList to temp2
set player2 to ""
if nOp ≥ 3 then
set temp3 to text returned of (display dialog "Name of Player 3" default answer "")
set the end of playerList to temp3
set player3 to ""
end if
if nOp ≥ 4 then
set temp4 to text returned of (display dialog "Name of Player 4" default answer "")
set the end of playerList to temp4
set player4 to ""
end if
if nOp ≥ 5 then
set temp5 to text returned of (display dialog "Name of Player 5" default answer "")
set the end of playerList to temp4
set player5 to ""
end if
if nOp ≥ 6 then
set temp6 to text returned of (display dialog "Name of Player 6" default answer "")
set the end of playerList to temp6
set player6 to ""
end if
if nOp ≥ 7 then
set temp7 to text returned of (display dialog "Name of Player 7" default answer "")
set the end of playerList to temp7
set player7 to ""
end if
if nOp = 8 then
set temp8 to text returned of (display dialog "Name of Player 8" default answer "")
set the end of playerList to temp8
set player8 to ""
end if
</pre>
Powerbook G4 12" Mac OS X (10.4.6) 1.5Ghz SD 512MB RAM

IPad 3 was ok charged it and now its dead. How do you reset the device?

My iPad is dead. Holding the home button doesn't start the device. It was ok about 4 hours ago and I then put it on charge. Now it appears dead. Is there a way to reset it?
Thanks in advance.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

Once object code is compiled and converted to a CIN, how do you view the original c code?

Similar Messages

Maybe you are looking for