Once project is finished the project should not show in Dashboard

HI All,
In my cProject my project status in completed last month.
once my project is completed ,my project should not show in cProject portal in starting page under projects dashboard.
how to make once completed project not apper in project dashboard.
Thank,
Kumar reddy.

You can create a view in the project dashboard and filter out the statuses completed or canceled. User can always create local views, if needed for all users you can create a global view, call it something like "Active Projects" and set it as default.
By the way, which version of PPM are you using?
Edited by: Lashan Wanigatunga on Aug 1, 2011 1:22 PM

Similar Messages

Unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)

I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal.

This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)

Get this message when I try to publish my iMovie project. "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"

See the discussion here:
https://discussions.apple.com/message/16784714#16784714

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list) How do I fix this???

Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.

I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space?

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

Every time I try to create a new project it says "The File Could Not Be Opened," how do I fix this?

see if the "oddbal problems" fix helps:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Project information on the distribution is not valid. &PJM_ERROR_MSG

Hi ,
When i am doing the "Import Standard Purchase Orders" Program in Purchasing module, I am getting the following error.
"Error: Project information on the distribution is not valid. &PJM_ERROR_MSG"
Application: 11.5.10.2
RDBMS: 9i
Thanks.

Hi user;
Please check Note:Invalid Project Information Error When Saving a Requisition With Project Data Defaulted From Preferences [ID 360337.1] and see its helpful
Regard
Helios

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

How to float a landing page to capture email address, only shown once per visitor to the site, and not on return visits?

I would like to float a landing page to capture email addresses, that is only shown once per visitor to the site, and not on return visits OR after they submit their email not to be asked again.
thanks guys!

Hi Scott,
Thanks a lot for the advice.
Actually I added user names to the apex_access_control table and assigned each user the desired privilege but did not notice that I should do the following setting.
*Access Control Administration > [RUN] > Set Application Mode: Restricted access.*
Thanks,
Guy

I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.

Restrict the user should not allow to select No Excise entry tab in MIGO

Hi
how to restrict the user should not allow to select No Excise entry tab in MIGO
if the material Excisable user can bale to select the No Excise entry tab in MIGO . my requirement .... if the Pop come Please enter Excise Invoice number and Excise Invoice Date user should not change the No Excise how to restrict pls advise me
@sakhi

These are the options provided by SAP keeping in mind Indian Scenario. Sometimes, vendor forget to send excise invoice copy with the material, in such case, you can select 'Only Part I'.
Even if you have maintain vendor excise details & material excise details (By mistake) in J1ID, system will throw an error message, excise invoice value is zero. In such case, we can select option 'No excise entry'.
Your requirement can't be fulfilled in standard way. Even if you go for any Z- developement, you will lose the option.

USER EXIT/ BADI (The price should not be changed in the billing document)

Hi all,
We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing.
Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
Thanks.

Hi,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
    USEREXIT_FIELD_MODIFICATION
    USEREXIT_PRICING_CHECK
    USEREXIT_FIELD_MODIFIC_LEER
    USEREXIT_FIELD_MODIFIC_KZWI
    USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin

HT1926 i cannot install itunes 11.4 and it says that dll to finish the installation is not found

so im trying to reinstall my itunes and there is a message saying that the dll to finish the installation is not found. so i need to contact the support. can anybody help me with this problem please.

Hi Dimas Muchammad,
Thanks for visiting Apple Support Communities.
If you are installing iTunes 11.1.4 on Windows and receiving an error during installation, the specific troubleshooting steps in this article can help:
iTunes 11.1.4 for Windows: Unable to install or open
All the best,
Jeremy

The shipment should not allow to save without partner forwarrding agent.

The CR (forwarding agent) partner is set as Mandatory in the configuration for partner procedure TR, but you can save a shipment without this partner function. We are only using Shipment type Z003 and the TR procedure is assigned, and the CR partner is set as mandatory but the system is not requiring it. Why isn't the Mandatory flag working in create mode? If there is a CR on a shipment already, it will not let you delete it, but it will let you create a shipment and save without the CR partner. See Shipmentxxx in DX1, it was created and saved without any partners on the partner tab.
The shipment should not allow to save without partner forwarrding agent.

Hi,
Check config for 'Set Up Partner Determination for Shipments'.
I believe the Partner function for Forwarding agent is FA and here you are talking about CR.
Also make sure you Partner determination procedure is reflecting in your Shipment type.
Regards,
Amit

Once project is finished the project should not show in Dashboard

Similar Messages

Maybe you are looking for