Once the voice service has been stopped, can I sti...

I am going to stop one of my phones' voice services, any ideas that might affect the phone that I might and might not be able to turn it on?
Thanks
Jack

no, has nothing at all to do with the phone but rather your phone service, and that Is between you and your network carrier.

Similar Messages

Hyperion s9 administration services wls9 service has been stopped

Hi ALL,
hyperion s9 administration services wls9 service has been stopped. Please let me know where can I find the reason.
Thanks.

Hi,
Once you configured EAS through configuration utility and say deploy it on an application server like Weblogic and registered as window services then only "Hyperion S9 Administration Services ATS5" will be visible in Control Panel-->Administartive tools --> Services.
First check have you configured EAS as window services or not - If Essbase Administration Server is installed and running as a Windows service, you cannot start
Essbase Administration Server manually because the default port number is being used by the Windows service. If you try to start Essbase Administration Server manually, an error message is displayed indicating that the port is in use.
Hope it will help you.
Atul K,

WAE 512 - ver 4.1.5b.7 - nodemgr: The device_mgr service has been disabled.

Hi
I have restarted the WAE and now I've this message:
The device_mgr service has been disabled.
here is message from CLI:
ASERVER-53#sh alarms
Critical Alarms:
     Alarm ID             Module/Submodule     Instance
   1 svcdisabled          nodemgr              device_mgr
Major Alarms:
None
Minor Alarms:
None
Is it possible to try manualy enable this service ? (After next restart I have the same message).
If you need any additional logs please let me know.
Thanks you in advance for your help.
James

James,
I found following exception thrown:
com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
    at com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
    at com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
    at com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
    at com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
    at com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
    at com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
    at com.actona.services.configuration.Configurator.(Configurator.java:47)
    at com.actona.services.Loader.(Loader.java:82)
    at com.actona.services.Server.(Server.java:65)
    at com.actona.services.Server.init(Server.java:170)
    at com.actona.services.Server.main(Server.java:231)
[FATAL] 2011-01-12 14:05:52 UTC - Server: Caught MgException - com.actona.services.configuration.MgException: TimePeriod is not time because it doesn't consist of 'time' element
Nested exception: TimePeriod is not time because it doesn't consist of 'time' element
com.actona.services.configuration.MBeanConfigAttribute.objectFromXML(MBeanConfigAttribute.java:158)
com.actona.services.configuration.MBeanConfigAttribute.(MBeanConfigAttribute.java:52)
com.actona.services.configuration.MBeanConfig.getAttributesFromXML(MBeanConfig.java:118)
com.actona.services.configuration.MBeanConfig.(MBeanConfig.java:39)
com.actona.services.configuration.ApplicationConfig.loadConfiguration(ApplicationConfig.java:182)
com.actona.services.configuration.ApplicationConfig.(ApplicationConfig.java:55)
com.actona.services.configuration.Configurator.(Configurator.java:47)
com.actona.services.Loader.(Loader.java:82)
com.actona.services.Server.(Server.java:65)
com.actona.services.Server.init(Server.java:170)
com.actona.services.Server.main(Server.java:231)
A quick look in our database and I THINK I found the answer for you.
I found a previous case where under rare circumstances an XML would become corrupted and solution was to run a script.
I'm actually not sure if I'm supposed to provide you with the script (there's always quite a few concerns with this), but I'm going to risk it.
However you can only run the script at your own risk and if it goes wrong please reimage the device.
Regarding CM and how devices are recongnized, forgive my inoreance but I believe it was in part mac address (or something else imprinted into device) of device, but can't remember for sure, nor have the time to look for it.
HTH,
Marcin

"A critical error has occurred while running the virtual machine and the machine execution has been stopped"

I have the following error:
"A critical error has occurred while running the virtual machine and the machine execution has been stopped"
When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
Can somebody give me any hint how to solve it ?
Thank you
Eugen

I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
Check vbox.log file to identify root cause.

The bonjour service has been disabled. Re-enable the bonjour service

The bonjour service has been disabled. Bonjour is required to share music with others. Please re-enable the service to use this feature. How do I fix this on my iTunes?

Hello, dkm.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

[svn] 650: Prevent potential NPEs from wait' ed long poll requests whose threads exit after the underlying endpoint has been stopped by a separate thread .

Revision: 650
Author: [email protected]
Date: 2008-02-25 16:55:13 -0800 (Mon, 25 Feb 2008)
Log Message:
Prevent potential NPEs from wait'ed long poll requests whose threads exit after the underlying endpoint has been stopped by a separate thread.
Bugs: BLZ-65 - Long-polling clients trigger NPE on server shutdown.
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-65
Modified Paths:
blazeds/trunk/modules/core/src/java/flex/messaging/endpoints/BasePollingHTTPEndpoint.java

Hi,
Looks like you're using BDB, not BDB JE, and this is the BDB JE forum. Could you please repost here?:
Berkeley DB
Thanks,
mark

The bonjour service has been disabled and i need it for sharing. I cannot get it to work with the services directions. It keeps telling me services stopping. HELP!

Bonjour has been disabled and i do not know how to enable. Been in the services and followed the instruction without results. Help. Thx.

Using Windows Firewall currently - Bonjour is ticked as an exception so it should be ok... but still no luck

Printers showing up after Printer Service has been stop or printers deleted

I started setting up the Print service on one of our Mac OS X.5 Servers.
Very simple to do.
At the printer configure and disable all sharing options mDNS, AppleTalk or EtherTalk...
On the server add the printer via IP address and select the correct PPD. In my case I have a couple of the same printer and wanted to setup a print center in a lab. So I disabled all sharing protocols on the server for each printer and then created a Printer Pool...
For some reason the particle printers weren't adding correctly to the clients so I deleted the printers and the pool (not sure in what order I did this).
Now on the client I can still see the Printer Pool and one of the printers from the server even when the service is disabled. The only way they disappear is when I shut the server down or pull it offline.
I found a website that describes this and how to fix it but it's based on Mac OS X.3.x. There must be more steps on Mac OS X.5?
http://macos-x-server.com/wiki/index.php?title=Myprint_queues_behave_erratically,_how_do_I_start_over_and_clear_out_the_oldqueues%3F

I observed the very same behaviour. One more reason not to use Apple's built-in print service.
Try deleting /System/Library/LaunchDaemons/com.apple.printserviceLPR_mDNSxxxxxxx.plist (where xxxxxxx is the name of the print-queue) and restart the server.
Regards
Michael

Why do I get error -1074388985 at CAN Connect Terminals when the Channel API has been stopped?

While trying to establish synchronized CAN and DAQ using the Channel API, I get the error -1074388985 while attempting to connect the RTSI Clock to the master timebase. The error message occurs each time I try to run the example VIs shipped with LabVIEW 6.1. I am using a Series 2 PCI CAN card with a 6034E DAQ card. Any ideas? Tech support did not have a solution.

Hi AVR,
This warning means you have tried to change an attribute on a running object. This causes the warning and should not take place.
Use the "Initialize' function instead of the "initStart" Function, then change the Attribute and use the "Start" function to start the communication, or stop the communication using the "stop" Function before you change any Attribute and then start again.
Hope that helps
DirkW

Microsoft Exchange Transport Service has been stopped.

I changed out failing drives on a customers SBS 2011 which uses Intel Rapid Storage Technology. I saw that it had an option to email a failing condition to up to three addresses. I configured it but got the Could Not Connect error from the RST software.
I Googled the condition and determined that I needed to install another Receive Connector on a different port, which is what I tried.
I opened all of the receive connectors in the MS Exchange Console - Server Configuration - Hub Transport section. As far as I know I did not change anything there, I just looked and cancelled. None of the new receive connectors I configured worked., Everytime
one configuration made no difference I deleted the connector, re added a connector using different options and tried the RST email test again.
Getting nowhere, I deleted the last new connector I configured, Closed the Exchange management console figuring I had a job for some time in the future when things were slow.
This morning I get the call No e-mail, and found the Exchange Transport Service stopped. I restarted it, made sure it was set to automatic, and it ran for about 3 minutes and then stopped. Right now I am keeping my customer working by starting the service
every 5 to 10 minutes.
Since I am not going to stay here indefinitely restarting the service, I need help!
J R Weymouth

Thanks for the links, I'll check them out. I finally got an error from the logs, in fact there are so many errors in the log I don't even know which one to follow. It gets a cluster of errors every 5 minutes (6 errors one critical) but that is when the transport
is shut down. I am relaying the first message that comes up after I restart the transport.
Log Name:      Application
Source:
MSExchangeTransport
Date:
9/16/2014 9:11:48 AM
Event ID:      17003
Task Category: Storage
Level:
Error
Keywords:      Classic
User:
N/A
Computer:      SBSSRVR2011.MyDomain.local
Description:
Sender Reputation Database: An operation has encountered a fatal error. The database may be corrupted. The Microsoft Exchange Transport service is shutting down. Manual database recovery or repair may be required. Exception details: Microsoft.Exchange.Isam.IsamDbTimeCorruptedException:
Dbtime on current page is greater than global database dbtime (-344)
   at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
   at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
   at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchangeTransport" />
    <EventID Qualifiers="49156">17003</EventID>
    <Level>2</Level>
    <Task>17</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-16T16:11:48.000000000Z" />
    <EventRecordID>1141638</EventRecordID>
    <Channel>Application</Channel>
    <Computer>SBSSRVR2011.BainInsuranceAgency.local</Computer>
    <Security />
</System>
<EventData>
    <Data>Sender Reputation Database</Data>
    <Data>Microsoft.Exchange.Isam.IsamDbTimeCorruptedException: Dbtime on current page is greater than global database dbtime (-344)
   at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
   at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
   at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()</Data>
</EventData>
</Event>
J R Weymouth

The Bonjour service has been disabled

Hi,
*What I have:*
iTunes 8.1.0.52
Vista 64-bit
*My Problem:*
When i got to Edit > Preferences > Apple TV, it shows this message:
http://i43.tinypic.com/2eykodk.png
*I've read and tried everything mentioned in these two threads:*
http://discussions.apple.com/thread.jspa?threadID=1703634&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1702293
*I've also:*
Uninstalled Bonjour, downloaded newest version and installed it.
http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html
Uninstalled Bonjour, updated my iTunes to 8.1.0.52
*Bonjour is in my services and task manager, and is running.*
http://i40.tinypic.com/e187i9.png
http://i42.tinypic.com/34y7e5f.png
Can anybody tell me a solution to getting iTunes to detect that Bonjour is running?
Thanks!
Message was edited by: PigFat

I had the same problem as yourself on my Vista x64 system. I've just uninstalled my Bonjour service and then reinstalled the latest 64bit Bonjour (currently v1.0.6 as at this posting). This seems to have fixed things. FYI - I'm running iTunes 8.2.
You can download the 64bit version of Bonjour for XP & Vista from here...
http://download.info.apple.com/MacOSX/061-5788.20081215.5t9Uk/Bonjour64Setup.exe
Cheers!

Service has been cancelled

This has given me a headache….
11 Months ago I cancelled my bt vision service due to my Freeview signal not been good enough... I received a pre-paid package from BT to send it back, which I did.
Fast forward 6 months, I realised I was still being charged for BT vision when I moved house, fair enough, rung the call centre “ yes sir I do apologise for this we will make sure this is rectified “
2 Weeks ago I realised that it is still going on, so I called the contact centre bouncing around from department to department, having the phone hung up every time I tried to speak to a senior member of the team, I finally got through to someone after 2 hours. They advised me that this will be resolved and a refund of £137.50 would be credited to my account. I had stated I would not pay my bill because I am owed this, when it is credited they can post the credit to the account. 1 day later my phone and broadband are suspended. So I make the call again… after 2 and a half hours of department hopping I get through to the BT vision billing department explain what has happened for what felt like the 100th time, to be told there’s not a lot they can do. They reorder the Vision account to be cancelled; they manually reactivate my connection, Great! But the credit I will need to speak to a supervisor “I will be transferred “ I am told… 45 minutes holding I look at the clock.. 8:00pm and unsurprisingly the line goes dead and all the helpful little call centre bees strudel off home.
Next day after laying in be contemplating turning Amish just due to convenience really, I head off to work.. Not before checking my emails before I leave.. But what’s this ahh my service has been stopped again WOO! So I get home from work.. I make the call again Blah Blah Blah wrong department, another person blah blah blah.. That’s the summery of an hour and a half. I hang up to go and eat... Ring back get through to a helpful gentleman, who says they will re cancel my vision because it doesn’t look like it’s been done and restart my service... and get the credit issued. Brilliant
So happy as can be problem seems to be sorted.. But waiiiit Tuesday morning I wake up get some breakfast get dressed, check my email before work it’s still working. 9am my phone goes it’s the wife my head thinks ack did I leave the loo seat up or something. No no BT have cut off our phone and internet... But not even the friendly cut off where I can still ring them from the landline... Full account cancellation. Sighhhh
So home from work hi to the wife, hi to the kid.. back on the phone to my bit on the side good ole’ BT. Department bouncing, we cant help you, blah blah blah, cut off, ring back etc etc. Finnaly I get through to a lovely lady in Sunderland who is nice as pie, she’s going to help me..we go onto a conference call with a manager somewhere.. the helpful soul who I spoke to on Friday put a cancellation on for my whole account.. and also there’s 12 cancellation order’s pending for my BT vision account. To get it sorted it’s going to take a day.
So I rang back yesterday got through to a call centre obviously not in Sunderland.. apparently they can’t transfer me to the helpful Mackem team but alas she is able to email them and asked them to call be back within half hour. So that was 19 hours ago. I’ve been without a stable service for 2 weeks, your chucking more and more late charges on and a cancellation fee. What I may do is charge you a late cancellation fee of 11 months plus the 24+ hours total I’ve been on the phone to you (of which I’ve probably only spoke to a human for 2 hours) So either someone fixes this shocking customer service or I am going to become Amish.

Hi RjMaJay,
Did you contact the BT Care Team (Mods) as suggested in ChristopherP post?
ChristopherP is one of the BT Care Team (Mods)
If you haven't contacted the BT Care Team (Mods) then you can by clicking on the link below.
Contact BT Care Team
The BT Care Team are a BT UK Based specialist team who have a good reputation for solving customer problems.
Once contacting them they will reply either by phone or email usually within 3 working days, however you will be given a tracking number immediately after sending the request. Please take note of this.
It may also be best to not ring the general helpdesk number once waiting for the BT Care Team to contact you, as it can sometimes confuse matters.
cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

The filtering process has been terminated

got 1 WFE and 1 App server
configured the search like this:
I've moved the search index on both servers so it's like this; (I know it's different folder names)
IndexPartitionOrdinal : 0
RootDirectory : E:\SPSearchIndex
ComponentId : 7bfd9b97-fb14-4e26-8b93-05ce8340c493
TopologyId : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
ServerId : 39202252-fb20-43c9-a674-84c3d4891da1
Name : IndexComponent1
ServerName : APP1
IndexPartitionOrdinal : 0
RootDirectory : E:\SearchIndex
ComponentId : 5c076b2c-945a-4a72-955a-237d003a7498
TopologyId : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
ServerId : ad0c8592-edec-47c5-a14b-df682c13c514
Name : IndexComponent2
ServerName : WFE1
on both servers The <machinename>/WSS_WPG and <machinename>/WSS_ADMIN has full control (also the Searchcontent account) to the folders - but still I get the error:
"The filtering process has been terminated "
can someone please advise so the Search can crawl flawless and without errors?

Hi,
Firstly, please ensure Search Service Account has access to the SearchIndex share which is usually located
in "%Program Files%\Microsoft Office Servers\15.0\Data\Office Server\Applications" directory. And make sure “WSS_WPG” group has full control permissions to "C:\Windows\Temp" directory.
Then try removing and add the existing crawl rules. You could also change the identity of the search to the farm account. Restart search related service and start full crawl.
If it still doesn’t work, please check ULS log and find more detail error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Is there anyway to either trade in your old Macbook Pro for a new version, or get a new power cord when the old one has been damaged?

Well i was just wondering.. since i do have a older version of the Macbook Pro.. and the fact that the power cord has been damaged

You can always get a price on what an Apple affiliate would give you for your old MacBook Pro by going to http://www.apple.com/recycling/gift-card/faq.html and reading the instruction for the reuse program. Or you can sell your old one on eBay (that's what I did - you'll get more for it). Apple doesn't do a simple trade-in.
Your cheapest route is just to buy a new adapter. If you don't know which adapter to get, call Apple and they can tell you, or visit your local Apple Store. They're about $80.
Good luck,
Clinton

Can a subVI tell when the application it is part of has been stopped and restarted?

Can a subVI tell when the application it is part of has been stopped and restarted?
It is easy enough for a subVI to tell when it has been run for the first time after having been loaded into memory. But is there a way for a subVI to tell when the application it is part of has been stopped and restarted? Is there some property or application-invocation-specific refnum that when queried multiple times during the same run of the application would return the same value yet when queried during different runs of the application would return different values?
I don�t want to depend on anything that happens when a run is exited.
I don�t want to require code to be included in the main V
I to accomplish the solution.
(Otherwise I could, in the main VI create an un-named semaphore tied to a global; the subVI could then check the global to see if the value changed, which it would between runs of the application.)
Any ideas?

Have you tried the First Call? function? It's on the Advanced>Synchronization palette.

Once the voice service has been stopped, can I sti...

Similar Messages

Maybe you are looking for