Once VPN is connected, how do I access files?

I was able to get VPN connected to the network at the office. What do I use to access files and how do I access the exchange server? Our system is not set up to use IMAP.
Thanks
MacBook Pro 2.0 Mac OS X (10.4.10) Need XP capability

Thank you for your suggestion. I did turn on file sharing on the server before I left last night and attempted to connect through the VPN to the server's local address at my office but I was unsuccessful. The IP address I used was the static assigned IP address of the server computer and I waited for over 10 minutes to connect without getting a connection or any error messages. Prior to that, when I used an incorrect address or attempted to use the actual server's assigned network name, I received an error message within 10 seconds. Is there something I haven't considered at this point?

Similar Messages

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
Matt

How do you access files on your time capsule from your mac?

how do you access files on your time capsule from your mac?

i had an old macbook pro that i had all the pictures on and i backed it up to my time capsule through time machine. i got a new macbook pro retina display recently and im wanting to see if i can get some of the pictures off of my time capsule now but i dont want all of them.

How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

Filebrowser for the iPad does this very well.
FileBrowser - Access files on remote computers for iPhone, iPod ...
Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
http://support.apple.com/kb/HT1331

VPN auto connect leads problem when accessing the private url in my app through HttpClient

Hi,
I have app to execute my WCF service through HttpClient(). I configured my SSL VPN in sonicwall mobile connect with auto connect option. So when accessing my internal WCF service, Wp 8.1 asks the VPN connection screen. If I follow the screen, VPN
has connected and return to my App. But here I received "An error has ocurred. While sending request to server" in Wp 8.1 screen. Even if I debug through visual studio I couldn't catch or track the actual error in code. Below the code I am using
for your reference. Kindly help me in this regard.
try
HttpClientHandler handler = new HttpClientHandler(); ;
handler.AllowAutoRedirect = false;
HttpClient httpClient = new HttpClient(handler);
httpClient.MaxResponseContentBufferSize = 256000;
HttpResponseMessage response = await httpClient.GetAsync("http://172.0.0.11/xxxxx/Service1.svc/xxxxCheck/" + usr.username + "/" + App.DeviceId + "/" + usr.password);
response.EnsureSuccessStatusCode();
string content = await response.Content.ReadAsStringAsync();
List<EmcUserResult> userres = JsonConvert.DeserializeObject<List<EmcUserResult>>(content);
if (userres.FirstOrDefault().Allowed == "TRUE")
NavigationService.Navigate(new Uri("/MainPage.xaml", UriKind.Relative)); // call MainPage
else
MessageBox.Show("This User was blocked. Contact admin.");
catch (Exception ex)
MessageBox.Show(ex.Message);

I recommend that you check the network traffic by using either Wireshark or Fiddler to see what's going on with the request.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How do I access files on my network I have Windows and netgear stora

I have a home network with Windows XP and Window 7 computers; and a Netgear Stora network hard drive. I want to be able to access files (photos, mostly) that are on the network from my iPad 2.
How can I do this?

First you have to share a folder or volume on the PC. How to do this depends on what operating system you have on the PC.
Once you have that set up, open a Finder window and look in the Sidebar under Shared. You may see the PC there. If not, go to the Go menu and select Connect to Server, and enter smb:// followed by your PC's IP address. You should be able to connect to the files that way. See this Apple article for further information.
Best of luck.

How do i access files on my network

I have an iMac connected to my network and my primary computer is a PC. How can I acces files on the PC throught the network?

First you have to share a folder or volume on the PC. How to do this depends on what operating system you have on the PC.
Once you have that set up, open a Finder window and look in the Sidebar under Shared. You may see the PC there. If not, go to the Go menu and select Connect to Server, and enter smb:// followed by your PC's IP address. You should be able to connect to the files that way. See this Apple article for further information.
Best of luck.

How do I access files with an iPad on a Lion Server?

One of the reasons I upgraded fron Snow Leopard server to Lion server is to access files from an iPad and iPhone. I see in the File Sharing sharepoint configuration box the iOS checkbox, but how do I get to the files from the iPad?

Thank you for shaking my brain! I kept looking for a file structure to show up, such as Fidner. Your answer got me thinking correctly. Instead of looking for a "Finder", I opened Pages on my iPad and touched "+" then "copy from webdav". From there I got a login screen and typed https://servername.com/webdav plus my credentials and it got me right to the files on the server! I can now access files on my server from my iPad and can save the changes back! It works both on the local network and remotely! Thanks again!
Message was edited by: FTZMan

How do you access files FROM a home network TO a CLIENT computer using "internet sharing" from a mac ?

Hi.
I just created a small network: 2 pcs and 1 mac.
2 pcs are using windows XP
1 Mac is using OS X
I would like to know how to access files from my pc1 to pc2 from my network.
Pc2 obviouslys is a client behind the intenet sharing my mac is providing.
I tried looking for the info online but most of the search brigns out "internet sharing" or "file sharing."
Any help would be great.

The following may help with the file sharing issues: OS X Mavericks: Share your files

How do you access files on iPad

The hp print control app saved a scan on my iPad. It didn't show up in photos. Wondering how to access this and place it in my photos. Is there an app to access your files on iPad?

If it's not in Photos app, have you looked in the hp print control app? If not, google the hp app for a user manual or help on how it works.
Apps generally cannot access "files" on an iPad - unlike a computer, each data file is associated with an app and only that app can access it (and then "send" it to another app, if that capability is part of the original app). There isn't a "file manager" than can look around an iPad to view all files. iOS is a closed system that takes security more seriously than computer operating systems.

VPN connected - how do I access my office mac?

VPN - I am connected remotely on my MacBook Air via a VPN connection to my office Mac. How do I actually "see" the files, folders, etc. on my office Mac?

Thank you for your suggestion. I did turn on file sharing on the server before I left last night and attempted to connect through the VPN to the server's local address at my office but I was unsuccessful. The IP address I used was the static assigned IP address of the server computer and I waited for over 10 minutes to connect without getting a connection or any error messages. Prior to that, when I used an incorrect address or attempted to use the actual server's assigned network name, I received an error message within 10 seconds. Is there something I haven't considered at this point?

When VPN tunnel connected, how is packet stream processed?

Here is a beginner questions.
When a VPN tunnel is connected, where exactly does its packet stream enter the router's processing? i.e.:
Are packets from the tunnel processed by the firewall on the inbound interface, or does they effectively bypass the firewall?
Are packets from the tunnel subject to NAT, or do they bypass NAT?

The packets are enter in to the exit tunnel interface of the router and then process the access list, NAT on which applied on that interface. After that it checks for the routing to route the packet.

How do I access files on my Netgear Stora with Ipad?

I have an Ipad2 and would like to be able to transfer files from my Netgear Stora drive to my Ipad. My Ipad can see the Stora drive but does not display any content. What do I need to do to be able to access the files on the Stora drive?

First you have to share a folder or volume on the PC. How to do this depends on what operating system you have on the PC.
Once you have that set up, open a Finder window and look in the Sidebar under Shared. You may see the PC there. If not, go to the Go menu and select Connect to Server, and enter smb:// followed by your PC's IP address. You should be able to connect to the files that way. See this Apple article for further information.
Best of luck.

Once VPN is connected, how do I access files?

Similar Messages

Maybe you are looking for