Once windows installed in partitioned disc and run the installer for support software only get BSOD when restart. Help!
I've tried reintstalling about 3 times, changing order of operations, still get blue screen.
When I install windows and follow all directions it works fine. Once I install the apple provided support drivers and the computer restarts it manages to stay on for about 15 seconds before blue screening.
MacPro Mid2010 2x2.4Ghz
16 gigs of ram
2 - 5770 Ati radeon 1024 MB video cards
I have latest lion updates and ran the updater
I have a brand new windows 7 installation disc, i have tried both 32 bit and 64.
boot camp that is in my OSX is 3.0.4 (322), but it does download the support software for windows which i save in a separete usb stick.
and I am doing the partition on a relatively new hard drive 500 gigs thats been partitioned.
Any Ideas?
I've attached of a photo of the blue screen message.
Cheers,
Paco
Pull all the other hard drives?
Upgraded to Boot Camp 3.3 already?
Have an Apple software RAID on other drives - AppleHFS and AppleMNT to mount and read HFS volumes - is buggy
you didn't burn the DVD from ISO etc right?
Safe Boot and rename AppleHFS.sys and MNT to .sys.old
Install MacDrive instead to access HFS
Who what or how did you partition the drive? normally I would just use Windows 7 DVD and not use BCA or share the drive with OS X.
Similar Messages
-
i bought extenscript toolkit cc, in a monthly payment of 35 nic. i did everything acording to the instructions and the program i got is adobe aplication manager.
and not the program for proccesing a picture - extenscript toolkit cc.
please help me.
hanan epshtainI bought using the software Adobe Creative Cloud for one year.
I pay in installments months 35 Nice ..
Adobe sent me an inappropriate application ... I can not get the software I ordered ... I'm asking for help ..
Unable to send email service department to get answers ..
This problem ..
Thank you
Hanan. -
Problems running the installer for Elements 11 - Mac
Mac OS10.8.3
15" Retina 2.7GHz 16GB RAM
I have downloaded the installation file for Elements 11 using the Adobe Installer; upon running the installer I get an invalid checksum error. Tried repeated times, same result. Tried disabling checksum check in disk utility, lets me get one step futther to see the installer package contents upon mounting the .dmg. When I run the installer, error message appears as follows;
Failed to initialise Installer
I got a message to install the Adobe Support Advisor, which I did. I ran it, and it did not detect any issues.
Have also tried using disk utility to verify and repair the downlaoded adobe dmg before mounting it - no change in the error when I try to run the installer.
Any advice?
Thanks, JB.Please try initiating a direct download using the steps listed at http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l. Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
If you continue to receive a message stating that your checksum is invalid then please try an alternate Internet connection. -
Firefox is not upgrading; I download and run the installer, but the version stays the same.
1. I'm on 64-bit Windows 7.
2. Current Firefox version is 33.0 Yahoo edition 1.32
3. Every time I open the About Mozilla Firefox dialog, an update appears to run automatically, followed by "Restart to Update." When I click on this button, Firefox closes but does not re-open. When I launch Firefox, it is still the old version.
4. Have also tried restarting my PC, to no avail.
5. I have encountered this problem in the past as well, and have subsequently gone back to Chrome. I really want to use Firefox because of Mozilla's respect for privacy; help! (and thanks).
6. Automatic "educated guesses" about my system are wrong; they mistakenly report WinXp and Firefox 9.Thank you, Guigs2, for your reply. However, my Yahoo mail account also reports an older version of Firefox and therefore only shows my account in the Basic Mail format. This is even after having clicked through their link to their version of Firefox and trying to update.
On a previous PC (also Win7, but 32-bit), I encountered this same problem and attempted to update through the Mozilla (not Yahoo) website, with the same results.
I will uninstall Firefox and try reinstalling from the Mozilla site. -
I recently followed a prompt to update my version of iTunes on my Windows based PC. I have some kind of permissions problem apparently because the new version cannot properly install and I cannot listen to my music. What can I do?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I'm trying to run the installer for firefox on widows 8, but the installer doesn't start.
Earlier today I tried to run Firefox and it didn't start, so I went and uninstalled it, then tried to reinstall it, but the installer would not pop up. But in the task manager I see Firefox 32bit installer is there.I've tried running it with my antivirus off. The installer worked before, and I was able to run Firefox. None of the other programs I've download are doing this.
please run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] & [http://www.kaspersky.com/security-scan kaspersky security scan]. also make sure that your security software isn't blocking the installation of firefox though...
-
Keep getting the same error message when I try to update iTunes. Error 7 (Windows error 126).
Hello scschwab,
I found an article with steps you can take when you are getting Error 7 when opening iTunes. I recommend following the steps in this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am unable to install and run the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
Error 7(Windows error 1114)Try and not duplicate these issues and do a search next time.
Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
and that Topic has the correct information to fix this problem.
Regards
pcbugfixer -
Hello,
I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
Please heLp.
Thank you.Repair your Apple Sofyware update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install -
I have just got a new macbook which I would like to download my copy of CS5.5 onto. It doesn't have a disc insertion section section so I downloaded CS5 from the adobe website. However I can't install it because my computer says the installer is from an unidentified developer. Can you help please?
That's Apple OS X's Gatekeeper kicking in.
Control+click the downloaded file and click Open to manually tell OS X that you trust the file and it's OK to open it. -
I'm trying to install windows 7 from Authentic Discs and it freezes while its completing the installation. i have a macbook pro 13inch early 2011 model and windows 7 hp 32 bit version and ultimate 32 and 64. does anyone have a clue to why its freezing?
plus its on the lion os
-
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
Windows 7 upgrade: discs will include the option for a 32 to 64-bit upgrade via a clean install?
I would like to know whether the Lenovo Windows 7 upgrade discs will include the option for a 32 to 64-bit upgrade via a clean install? I called Mentor today and was told the answer is no, but I was hoping someone here could tell me differently.
If "no" is truly the answer, I would like to voice my complaint: The upgrade discs from Microsoft (i.e. the retail upgrade discs) include both the 32 and 64-bit versions, so I don't completely understand why Lenovo's upgrade program doesn't offer the same thing. I purchased my T500 in August, and back then Vista Ultimate 64 was not offered, so I chose Vista Ultimate 32 thinking that I could later upgrade to Windows 7 Ultimate 64. This assumption was based off of the info. on Microsoft's website indicating that all upgrades would contain the 32 and 64-bit versions. I even customized my computer with 4 gigs of RAM thinking that I could take advantage of the extra gig once I installed Windows 7 64.
I don't understand what Lenovo or Mentor Media have to gain by restricting a 32 to 64-bit install. I voiced this opinion to Mentor Media over the phone, who responded by saying that I should be happy since I am receiving a "free" upgrade. I don't think this is an accurate assessment for two reasons: (1) I had to pay $17.03 for shipping, and I still haven't received the upgrade and (2) The total cost of my computer was almost $3,000, and the purchase was made a mere few weeks before Windows 7 was released. $3,000 is a lot of money. I waited for the details of the Windows 7 Upgrade Program to be announced BEFORE purchasing my machine. When I finally bought my computer I accounted Windows 7 into the price I was paying. In addition, when I bought this computer I did so expecting good customer service as a given. Not providing a 64-bit upgrade without a rational explanation as to why does not qualify as appropriate customer service.
As most of you know, 4 gigs of RAM is useless with a 32-bit OS. Also, NOW Lenovo is building new T500s with the option of having Windows 7 Ultimate 64 (why wasn't Vista Ultimate 64 offered when I bought my computer???). And the price for choosing Windows 7 Ultimate 32 is EQUAL to the price for choosing Windows 7 Ultimate 64, which proves that there is no cost difference. I just want to know what Lenovo has to gain by denying customers a 64-bit upgrade? There would really be no additional cost since as I mentioned before, Microsoft's retail upgrade includes the 32 and 64-bit OS on one disc. If anything I would think that it's costing Lenovo money to strip the 64-bit install from the upgrade discs.
Can anyone please address my problems? Do you think there is anyone at Lenovo I could contact to voice my opinions? I have been a loyal Thinkpad customer for over 5 years now, and I expect better from Lenovo. Thank you for reading!
moderator note: core question add to title, as stated in the forum rules and it will help others too answer your questions.Daventry wrote:
Is there any way to request a 64-bit OEM? Why should Lenovo care whether I want a 32-bit or 64-bit as long as it's the same edition (Ultimate edition)?
if your system shipped with a 32-bit version of vista then you will be sent 32-bit windows 7 upgrade media. the reason for this is two-fold.
first, because this is upgrade media, it's impossible to install a 64-bit version of windows over a 32-bit version. doing so would require a clean installation and upgrade media simply won't allow this. this is the case with retail media, too. if you had 32-bit vista installed and wanted to upgrade it to 64-bit using retail media, you'd have to wipe your system or set up a dual-boot.
second, the COA (certificate of authenticity) on the bottom of your system is for vista. because of this, your new license is of an upgrade from vista to 7. this is how microsoft licenses it and it is their policy, not lenovo's. microsoft's policy with OEMs is that you must install vista first, then upgrade to 7 (unless, of course, you purchased your system native with 7 on or after the 22nd). since your original lenovo preload is of a 32-bit OS, the issue becomes circular and you'll have to refer again to the first reason.
i understand your frustration and wish this stuff were made easier for everyone. it's repetative reading post after post of people with 4GB installed who don't understand the limitations of a 32-bit environment. i wish both manufacturers and users switched to 64-bit OSes sooner. the same thing happened when the industry went from 16-bit windows 3.11 to 32-bit windows NT4/95 and limitations went from 16KB all the way up to 4GB (which, in 1995, no one thought we'd ever exceed). the difference is that people were complaining on BBSes over 14.4k modems instead of on GUI-based forums using broadband connections. times sure have changed.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE -
I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!
Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.
Maybe you are looking for
-
Why can I not get any apps to download
When I try to download apps says can Not be purchased at this time even free ones
-
Hey, when I have a PDF file located in a directory of my sap-system, can I call that one by a link to a bsp page from outside the system? For example: I´m generating a pdf file and store it to /tmp/file.pdf. No, I need a button on a bsp page, which l
-
Add new selection field in an infoset
Hi everyone, I have a problem changing an infoset when I add an additional field. This field is added to its respective field group. The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field c
-
How can Manage Permissions for DB in Shared Services Security Mode
In shared services security mode, after provisioning users for Essbase applications, only can assign database calculation and filter access. How can I grant permissions "Access Databases" like in native mode?
-
All this happed within a few minutes (Assuming it only takes minutes to install and not hours. It was all the same morning.): I installed WLS 6.1 sp1. I installed WLI 2.1. I tried to install WLI 4.0 and got the message during install: [[[[ WebLogic S