Oncurrent program EAMCDCL. Routine &ROUTINE received a return code of failu

Hi Tech gurus,
i am getting below error while "Closing the eAM work orders" in R12. its getting completed but with error's. below one is the error details.
"This request finished with an error and produced the following completion message: Concurrent Manager encountered an error while attempting to start your immediate concurrent program EAMCDCL. Routine &ROUTINE received a return code of failure.
Contact your support representative. "
Need your help its urgent.
Thanks in advance

hi
"This request finished with an error and produced the following completion message: Concurrent Manager encountered an error while attempting to start your immediate concurrent program EAMCDCL. Routine &ROUTINE received a return code of failure.
Contact your support representative. "Please post the contents of the concurrent request log file.
;) AppsMasti ;)
Sharing is Caring

Similar Messages

Printer not-accepting APP-FND-00500: AFPPRN received a return code of failu

Hi Gurus,
skgtag: not-accepting APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1.
This is my error. My same request output is printing to other printers. But it is not printing in particular printer.
My printer is shared is windows 2000 system and we have installed Unix files & printer sharing windows feature.
while executing below command from soloris command line
lp -d skctag -n 1 sona
skgtag: timed out error is coming please give advice in this.

Hi Hussein,
Now concurrent is completed normally without any warnings.
Server OS Level
Now it is not showing any error but printout not coming in printer.
lp -d skctag -n 1 /rman_backup/PROD_rmanfullbkp.sh
request id is skctag-60 (1 file(s))
But printout not coming ....
Concurrent Log file for your reference.
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 50089046
Number of copies : 1
Printer : skctag
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 07-JAN-2013 11:14:08
---------------------------------------------------------------------------

APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN

Hi All,
i have configured a printer in R12.1.3, when i am trying to print its giving below error...
please help..
lp: The printer or class was not found.
Pasta: Error: Print failed. Command=lp -c -dHP_P4014N /apps/local/inst/apps/UAT_server/appltmp/pasta9331_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Thanks
RB

And found this Exception also... in the diagnostic output.
EXCEPTION - One or more versions were missing. caught in 'FNDPastaDiag.retrieveSupportFiles'
java.lang.IllegalArgumentException: One or more versions were missing.
at oracle.apps.jtf.regress.qatool.base.TextUtility.compareVersions(TextUtility.java:650)
at oracle.apps.fnd.diagnose.FNDPastaDiag.retrieveSupportFiles(FNDPastaDiag.java:1486)
at oracle.apps.fnd.diagnose.FNDPastaDiag.runSupportTest(FNDPastaDiag.java:556)
at oracle.apps.jtf.regress.qatool.base.DiagBase.runTest(DiagBase.java:373)
at oracle.apps.fnd.oam.diagnostics.exec.LegacyJavaTestExecution.runTest(LegacyJavaTestExecution.java:147)
at oracle.apps.fnd.oam.diagnostics.exec.LegacyJavaTestExecution.execute(LegacyJavaTestExecution.java:83)
at oracle.apps.fnd.oam.diagnostics.exec.WorkerThread.run(WorkerThread.java:49)
at java.lang.Thread.run(Thread.java:619)
ACTION - Please log an iTAR (Service Request) for product "Support Diagnostics Project" (ID=1332) to notify support about this issue
Thx
RB

AFPPRN received a return code of failure from the OSD routine FDUPRN

Hi all,
Operting system : Solaris 9
Oracle application: 11.5.10
i would like to ask query related to buffer area of pinter on solaris server.
we are trying to print cheques using oracle application on network printer.
some times it is printing the cheques with out any problem but sometimes it throws and error message in concurrent request log file.
****************** L O G F I L E C O N T E N T S ***************
Printing output file.
Request ID : 849798
Number of copies : 1
Printer : radch1
Pasta: Error: Error reading input file for type checking.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. An error occurred while AOL tried to spawn the print process
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. An error occurred while AOL tried to spawn the print process.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-AUG-2009 11:49:18
****************** L O G F I L E C O N T E N T S ***************
my question is
1) Do we need to delete any temporary files from server related to printer.
Regards

Hi,
What is the status of those concurrent requests (Completed with Warning or with Error)?
1) Do we need to delete any temporary files from server related to printer.Usually, you do not need to delete any files manually, temp files will be created by the application, and there should no issues with the files permissions (unless you have some other instance running on the same node with different applmgr user). However, you can safely clean (.t and .tmp) files as per the following documents.
Note: 435437.1 - Most Common Solutions to FRM-41839 and .tmp Files Not Being Deleted
Note: 145487.1 - Files Types .t and .temp and .tmp, are Saving Under /var/tmp
Note: 162232.1 - Why Does Oracle Forms Create .TMP Files Which Fill Up The Filesystem e.g. /tmp ?
I would also suggest you search Metalink for APP-FND-00500 and you will get many hits, go through the documents and see if it helps.
Regards,
Hussein

Program ended with error or warning, return code: F

Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33

There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations.

Error while calling COM routines via application prog(return code 1028533-)

Hello Expert,
In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
'Error while calling COM routines via application program (return code 1028533-)' is encountered.
In my selection id, i have only two locations....there is no material selection.
When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
Any advise to fix this issue would be much appreciated.
Thanks.
Tom

Hi Tom,
Please see if below exiting threads help you.
COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
Error for COM Routine application program (return code 40028)
Thukral

Report "completed with warning "   APP-FND-00500: AFPPRN received a return

hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.

Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

CSM HTTP return code checking

Hey again.
I have been looking into the CSM return code checking feature as suggested by this forum. This is a little closer to what I am looking for but I have question about what happens when there is a failure.
If a 500 code for HTTP is seen three times, for example, and the server is removed from the farm, is the original request from the client tried on the next server? Or is a reset sent back to the client, or the original code, and the client must try again.
I am trying to understand if the client will notice if the CSM noticed X number of a particular error and removed the server from the farm.
Thanks for any help!
/ahuffer/

I think you are mixing two things up(Inband health monitoring & HTTP return code checking).
The "Inband health monitoring" feature checks for both RSTs from a server and the failure of the server to respond to a SYN. If a SYN ACK response to a SYN is not received,the TCP portion of the code will perform several retries of a SYN before timing it out.
It is configured as follows
CSM(config-module-csm)# serverfarm xyz
CSM(config-slb-sfarm)# health retries 10 failed 50
(Retries are the number of abnormal end sessions that the CSM will tolerate before removing a real server from service. The failed time is the number of seconds that the CSM waits before reattempting a connection to a real server that was removed from service by inband health checking.)
"HTTP Return Code checking" is the CSM feature that can be configured to take a server out of use in response to receiving specific return codes.
When HTTP return code checking is configured, the CSM monitors HTTP responses from all balanced HTTP connections and logs the occurrence of the return code for each real server. The CSM stores return code counts. When a threshold for a return code is reached, the CSM may send syslog messages or remove the server from service.
Unlike "Inband Health monitoring", "Http Return code checking" feature has a small (estimated in 10-15%) impact on CPS setup rate, since it requires parsing L5 information in the server-to-client direction.
If the server is taken out of service, Client's request will be loadbalanced among available servers.
Syed
Syed

Client Copy with return code error :W

Hi Gurus,
When I am copying from Prod. client 500 to Quality Client 400 in (ECC 6), I am getting
'Program ended with error or warning, return code: W"
can any body please give soultions for this
Regards
Gokul

Hello Mr. Bhavik,
I had check in SCC3 client copy log and all error was got in test run, below gives details of log and examples of some table details log please help me what I can do?
Target Client     400
Source RFC Dest.:     CLNT500TRP
System Name:     TRP
Client in Source System     500
Copy Type     Remote copy
Copy Type     Test Run
Profile          SAP_ALL
Status          Completed w. Dictionary Errors
User          BASIS
Start on          27.03.2010 / 11:33:21
Last Entry on     27.03.2010 / 12:20:36
Statistics for this Run
No. of Tables         52598 of     54115
Deleted Lines     5394087
Copied Lines     31175343
Warnings and Errors
Table Name     Component     Package
A001     SD-MD-CM     DDIC Error        (See SE14)
A004     SD-MD-CM     DDIC Error        (See SE14)
A005     SD-MD-CM     DDIC Error        (See SE14)
A006     SD-MD-CM     DDIC Error        (See SE14)
A007     SD-MD-CM     DDIC Error        (See SE14)
A009     SD-MD-CM     DDIC Error        (See SE14)
A010     SD-MD-CM     DDIC Error        (See SE14)
A012     SD-MD-CM     DDIC Error        (See SE14)
A015     SD-MD-CM     DDIC Error        (See SE14)
A016     SD-MD-CM     DDIC Error        (See SE14)
A017     SD-MD-CM     DDIC Error        (See SE14)
A018     SD-MD-CM     DDIC Error        (See SE14)
A019     SD-MD-CM     DDIC Error        (See SE14)
A021     SD-MD-CM     DDIC Error        (See SE14)
Table Information
Table:                      A001
- Short Description:        Not Used in Standard
Package:                    VKON
- Short Description:        Application development R/3 conditions
Application Component:      SD-MD-CM
- Short Description:        Conditions
Delivery Class:             A
Table Type:                 Pooled table
Technical Information:
Nametab of Table is Correct
Table Exists in Database:   KAPOL
Table Information
Table:                      A028
- Short Description:        Info Record for Non-Stock Item
Package:                    VKON
- Short Description:        Application development R/3 conditions
Application Component:      SD-MD-CM
- Short Description:        Conditions
Delivery Class:             A
Table Type:                 Pooled table
Technical Information:
Nametab of Table is Correct
Table Exists in Database:   KAPOL
Regards
Gokul Borse
9881843629
Edited by: Gokul Borse on Mar 28, 2010 7:17 AM

ICMP Return Code of H

Working with IPv6 and I received a return code of H. Anyone know where you can find what all the values for the ping reply mean including the H above?
Thanks,

Hi Greg
H = Host Unreachable
Here you are ping Test Characters (IPv6)
! = Each exclamation point indicates receipt of a reply.
. = Each period indicates that the network server timed out while waiting for a reply.
? = Unknown error.
@ = Unreachable for unknown reason.
A = Administratively unreachable. Usually, this output indicates that an access list is blocking traffic.
B = Packet too big.
H = Host unreachable.
N = Network unreachable (beyond scope).
P = Port unreachable.
R = Parameter problem.
T = Time exceeded.
U = No route to host.
Hope this helps

Mapping of Return code to Message class

Hi all,
My function module exports a return code in the variable l_ldaprc, there is a message class called ldaprc which has the text corresponding to the return code. Within my program i want to map this return code to the appropriate text in the message class so that i can display the text.
Can someone help me with the syntax ?
Awaiz

Hi all,
I was able to do the mapping using the following syntax.
message id l_msgid type l_mtype number l_msgnum into l_rcmsg.
where
l_msgid type sy-msgid valus 'LDAPRC'
l_msgnum mapped to l_ldaprc.
Thank u all !

Error while calling COM routines via application program (return code 40028

Hi ,
When i am doing these steps i am getting the following error.
1.from SAP menu...Demand Planning>Planning>Interactive Demand planning
       2.after the transaction gets loaded...click on the 2nd button that is selection window from the left ALV menu..on the top.
        3.type the below
show - Material
APO Planning Version - K01
Material - 12345
4.Material 12345 will be loaded
5.Double click and i am getting ''error Error while calling COM routines via application program (return code 40028)''
Note : Observed that this is not happening everytime, but happening alternatively.
Can any one say what is the problem for Error.
Thanks
Gerard

Hello Gerard, Hello Krishna,
-> The liveCache application failed with COM error::
                               40028 Illegal timestamp in rough timegrid
More details about COM error 40028 you will see in TA /n/sapapo/om10
     -> Return code: 40028 -> execute ::
Invalid time stamp in the time buckets profile relation
( om_ts_tgrelinvalidstamp )
   < click on '?' mark >
-> Open an OSS message in accordance with SAP note 167280 if further help
     needed to solve the issue on your system.
Thank you and best regards, Natalia Khlopina

"Error for COM routine using application program (return code 40,020)"

Dear All,
Working on 4.1
We are getting the below error while loading the Data into planning book...
"Time Series has to be updated"
After this we updated the storage bucket profile and the fiscal year varient calender.
And after this we are trying to initialize the planning area..but getting the below error...
"Error for COM routine using application program (return code 40,020)"
So then we try to run the LCM CON check , but here also we are getting the below log...
"Inconsistent time series initialization horizons"
We teasted all the above in TEST system , but we are not facing any issue.
Plz plz help us to resolve the same.
Regards,
Rajesh Patil

Hello Rajesh,
COM error 40,020 generally indicates that no Time Series exists for
the characteristic combination that is being loaded or saved.
In certain cases it could be related to missing Time Series for aggregates.
Therefore, performing a consistency check for the relevant planning area by running the program
/SAPAPO/TS_LCM_CONS_CHECK is usually the first option. You could also check the relevant planning
object structure and any aggregates using the programs /SAPAPO/TS_PSTRU_TOOL and /SAPAPO/TS_PSTRU_CONS_CHECK.
Additionally, please make sure that the time series exists for the horizon for which data is to be loaded. Should all these not resolve the issue, the problem will be resolved by deinitializing & reinitializing the time series.
Please note that deinitializing of the the planning area will lead to data loss, so please take the backup of your data before you
deinitialize the planning area.
Hope this helps.
Regards,
Ade

Error for COM Routine application program (return code 40028)

Hi,
When we loading data in Planning Book ,we are getting below error
Error for COM Routine application program (return code 40028)

Hi,
Did you try checking your COM build? The COM communicates between your database and Livecache and fetches the data requested. The last time we had this, SAP recommended COM upgrade.

Error for COM routine using application program (return code 40069)

Hi,
In our planning book, sometimes, when we change a value and save, we are getting a pop up with the message "Error for COM routine using application program (return code 40069)". When we click ok, the value in that cell is reset to the previous value.
I initially thought this is due to duplicate CVCs and ran the consistency checks, /SAPAPO/TS_LCM_CONS_CHECK and /SAPAPO/TS_PSTRU_CONS_CHECK. I found few and corrected them. Now even after correcting them, I am still getting this COM error.
I could not find any SAP notes on this.
I switched on the SQL trace in ST05 and executed the same operation to get the COM error.
I noticed this part of the trace that is unusual and I am guessing that is what the system is doing when I get the error.
Can somebody please explain me the meaning of this attached trace?
http://spreadsheets.google.com/pub?key=pMjKR_3qLaxblBDDPfRt6cw
what does the SIM_SIMSESSION_CONTROL do?
Does CALL USER.SAPTS_AGGMULT_TIMESERIES mean there are duplicate time series?
Thanks.

I may not be technical person but may be the following thread on SIMSESSION may help.
SIM Session
ST05 trace only gives DB level traces. It would not give you traces of things happening in Live Cache since there are stored DB procedures that are called for LC activity.
Did you do OSS search on "return code 40069" ? CHeck OSS note 863244. See if it is applicable.

Oncurrent program EAMCDCL. Routine &ROUTINE received a return code of failu

Similar Messages

Maybe you are looking for