One arcive file currupted

Hi ,
I did my COLD backup using 10g RMAN now one archive file is corrupted how i ignor this file recover rest of files using RMAN please .
Thanks in advance

All,
Does it ask for archivelog when the backup taken is a
cold backup?
thanks
PkWhen you're database is in archivelog mode ( which it is )
and you give the command "restore database" followed by a "recover database" command, Rman will try to recover your database until the last known archivelog registered in the control file.
You could try a Point in time recovery ( with the SCN as suggested above) to over come this issue.
When you loose an archivelog file you cannot do a full recovery until you're last checkpoint.
An you will have to go back until the last correct archivelog.
If there is a workaround to this problem it will result in an inconsistent dataset, and then you're problems just begin.
try and recreate a correct set of data from this database and hope you're lost data is back and correct. so in my humble opinion this could easily be a dead and street after many hours of headache

Similar Messages

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

2 or more Sales Quotatons in one XML file

Hi,
i wanted to know if i can tranfer 2 or more sales quotations to SB1 using only one XML file or do i have to split so that every sales quotation will have a seperate XML file?
Thanks, udi

The person just opened some additional window using Window > New window. Perhaps to have different Views of the file and not having to scroll all the time.
You can easily fix it by just closing the windows. It does no harm to the file. When you save with only one window open, next time you open will also be one window.

Scanning multiple pages as one pdf file

Hi Im using a Macbook Pro 10.9.5 and am trying to scan multiple pages and save as one pdf file. One suggestion is to use image capture. However, when I try to do this it says no camera or scanner is detected but it does not give me an option to copy multiple pages. Any suggestions. I have tried lowering the resolution but still have no luck.

Hi SusieG1026,
Are you sure to select file type Correct as text in image capture window?

I have sent a file to the trash bin. When I come to empty the trash bin everything goes out except this one particular file and I get a note saying the file is 'in use' but it is not. How can I delete this file from trash?

I have a Macbook Pro with OS X Lion 10.7.2. I have sent a work file to the trash bin along with many other files. When I empty the trash this one particular file remains and I get a message that this file is still in use. I have tried returning the file to my documents, opening it, closing it and then sending it to trash and again I try to empty trash but the same message comes up - Q - How can I trash this file permanently?

First just try logging out and back in. Whatever is holding on to it may not be running after the logout thus freeing it so you can trash it after logging back in.
You might also try Trash It!
Lastly, look at the following for suggestions:
The X Lab: Solving Trash Problems

Generate multiple XML files from one Invoices file in AR Selected Invoices

I have converted our Oracle EBS 11i Selected Invoice RAXINV.rdf to XML and created a template for XML Bursting. I'm bursting fine at the:
/ZRAXINV/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_CF_NO/G_CF_NO. My question is since I'm writing out my pdf output invoices to the filesystem on Sharepoint; I also need to archive the XML part of each invoice broken down by the same group as .//LIST_G_CF_NO/G_CF_NO. When I convert the rdf to XML it produces one XML file from which I created the templates.
My requirement is to archive both the individual invoices from the templates and the corresponding XML pieces on Sharepoint so that we will be able to search and link the xml to the pdf written out to the filesystem on Sharepoint.
Any idea how should go about this requirement will be much appreciated.
Thanks,
Leo

So how does it take this file
file>
<statement>
<name>John Dow </name>
<address>123 Main</address>
<phone>972-213-3434</phone>
</statement>
<statement>
<name>Jane Dow </name>
<address>345 Main</address>
<phone>972-213-3534</phone>
</statement>
<statement>
<name>Marry Dow </name>
<address>678 Main</address>
<phone>972-213-3435</phone>
</statement>
</file>
and create these three different one?
1.)
<statement>
<name>John Dow </name>
<address>123 Main</address>
<phone>972-213-3434</phone>
</statement>
2.)
<statement>
<name>Jane Dow </name>
<address>345 Main</address>
<phone>972-213-3534</phone>
</statement>
3.)
<statement>
<name>Marry Dow </name>
<address>678 Main</address>
<phone>972-213-3435</phone>
</statement>
Is it not going to just grab each element after the file tag? I'm just confused about that.

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way to fix:either restart Firefox or reduce the window and open it again.

Ever since the latest update, my task bar (if it's called that - it's the one with "file,edit,view, etc") will "grey out" and I won't be able to type into any websites I visit. Only way I can proceed is if either restart Firefox (very annoying) or reduce the window and open it again. Please help!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Corrupt_localstore.rdf

How do I import several layers from one Illustrator file into another Illustrator file?

Hi!
I have ten Illustrator documents with appr. 100 layers in each document.
Each layer in all documents are named correctly for automatic script exporting to PNG files.
Now I want to import all layers from all ten documents into one master file. And importantly, I want to keep the exact names of each layer.
Thank you for any help on this!
David

Layers Palette flyout >> Paste remebers layers (Enable)
Now when you paste the layer names will come over.

Can I print photos at different resolutions in one PS5 file?

I am printing photos on fabric. I'd like compare one printed at 300dpi and the same photo at 150 dpi. I was going to set them side by side on a piece of fabric and realized I had to specify the resolution of the file I'm placing them in. Can I have two files at different resolution in one file? If the new file is of 300dpi resolution how does this affect the image at 150dpi? Thanks!
Mary

Hello again,
thanks so much for helping a newbie sort things out. I'm still confused. I know that a higher resolution like 300dpi, has more dots per inch and has the potential to give me more detail in print than a lower dpi.
If I crop a raw file as an 18" square- I will make it either 150 or 300 dpi. I'm trying to place two images ( the same images) side by side in a photoshop file to compare the results when they print- (I'm printing with an online vendor). Can I do that? that is, place a 150 dpi image next to a 300 dpi image in one PS file, identified ast 300dpi ? What are the print results? Will both images look the same, or will the 150 dpi be converted to 300 and I won't see any difference anyway?
Or, do I need to set up two separate files-one at 150 and one at 300, and print them separately, to compare them?
Can you help me understand this? Thanks!

How to import 12 different PPro files into one Encore file to make DVD

I'm trying to create a DVD with 12 different lessons on it. I have created 12 Premiere Pro CS4 files (each is a slideshow lessons with narration) and I want to bring them all into one Encore file. I can send one file to Encore via Dynamic Link - but when I open another PPro file and try to send it to the same Encore folder - it erases the file I put in there previously. Maybe I'm going about this all wrong - I really don't know. Please Help.

Hi Stan,
Thanks for the reply.
Since I wanted to get the DVD finished asap - I jumped right into PPro CS4 without going through a learning process first.
When I said "file" I meant one of the 12 or 13 different PPro projects that I saved to my Desktop...each lesson is different - so I made and saved each lesson separately and placed each of them in a different folder. Each lesson only has one "sequence" (and I'm not sure what "sequence" means yet).
These are basically PowerPoint lessons with narration - each lesson containing anywhere from 25-75 pictures or text slides.
When I opened up one of the lessons in PPro and sent it via DL to Encore - that was fine. It created an Encore file. When I opened up the next PPro file and tried to DL to that same Encore file - it appeared to delete or do away with the first file I had sent there. I could DL each of the 12 or 13 files - but only to its own Encore file. I couldn't figure out how to get them all into the same Encore file. But thanks to all the help on this forum - there are now 13 little videos that I can import into the same Encore file. And that's amazing.
Thanks for the encouraging words that this project might all fit on the same DVD (I was worred because the files add up to 107 minutes - and I the DVD holds 120 minutes (I think). I was assuming that after I created a menu and added a picture for the background in the title page, etc., that it would all add up to too much information for one DVD).
I'll let you know how the DVD turns out.
Thank you very much.
ph

How to Load 2 library files using System.loadLibrary in one .java file!!!

Hello,
Someone please help me. What I am trying to do is load two .DLL files in my program. Program works fine when I
do the following way i.e. I have two .java files and in each I am loading one .DLL file. But I don't want to have
two .java files I want to load both the .DLL files in one program.
**************** Example.java **********
import java.io.*;
import java.util.*;
public class Example
public native int A(String in);
static
System.loadLibrary( "API2" );
public static void main( String args[])
     Ex ex = new Ex();
     int r;
     r = ex.A("TEST");
public Example()
*****************Ex.java*****************
public class exsysml
public native int A(String in);
public exsysml()
System.loadLibrary("API3");
The above way works. But I need only one .java file to load both the .DLL files. i.e.
import java.io.*;
import java.util.*;
public class Example
public native int A(String in);
static
System.loadLibrary( "API2" );
System.loadLibrary( "API3" );
public static void main( String args[])
     Example ex = new Example();
     int r;
     r = ex.A("TEST");
public Example()
but when I do this way it doesn't work and I get a UnSatisfiedLinkage Error at ex.A("TEST"). While doing the top way it works.
How can I fix this to just have one .java file and load both the library files as done in the bottom program but doing this program doesn't work. Any help is appreciated.
Thanks!

what I figured out so far is that we can only load one library file in a single class and define all the native methods present in that library in the class where we are loading it. Means we can't load multiple library files in a single class. It's just my thought else if someone provides a better solution. I may be wrong so that's why I need your help.
Thanks

Digital movie download - can I move it from one iTunes file to another?

I have gotten several new Blu-ray and DVD sets for Christmas. Included is a digital copy which can be downloaded. Once I download and move it to iTunes, can I export that from one iTunes file on my Mac to another Mac which I own? I haven't been able to find a relevant post.

CWmain, this is something I'm keen to know too. I've got the new Star Trek and Transformers 2 Blu-ray discs with digital copies. I was hoping I could download the movies to my Mac Pro by redeeming the codes supplied with the discs and once downloaded just copy the resulting download files across to my MacBook Pro. I'm hoping that because both machines are authorised with my iTunes account it should just 'work'. Can anyone confirm this is correct before I go ahead?

How can I copy layers from one .fla file to another .fla file?

Hi,
How can I copy layers from one .fla file to another .fla file? Please do help.
Thanks.

Select all the frames you want to copy, right click and select copy frames then select the file you want to paste them into and right click again and then paste frames.
The layers the frames are should come across with them.

How do I import one xml file into 3 separate tables in db?

I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
*Notice the missing values in middleName, accountType
sample xml
<account>
<firstName>Joe</firstName>
<middleName></middleName>
<lastName>Torre</lastName>
<accountAddress>
<streetAddress>
<addressLine>myAddressLine1</addressLine>
<addressLine>myAddressLine2</addressLine>
</streetAddress>
<city>myCity</city>
<state>myState</state>
<postalCode>mypostalCode</postalCode>
</accountAddress>
<accountId>A001</accountId>
<accountType></accountType>
<account>
I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
Result #1
<rowset>
<row>
<firstName>Joe</firstName>
<lastName>Torre</lastName>
<accountId>A001</accountId>
<row>
<rowset>
Result #2
<rowset>
<row>
<addressId>1</address>
<city>myCity</city>
<state>myState</state>
<postalCode>myPostalCode</postalCode>
<row>
<rowset>
Result #3
<rowset>
<row>
<addressId>1</addressId>
<addressLineSeq>1</addressLineSeq>
<addressLine>myAddressLine1</addressLine>
<row>
<row>
<addressId>1</addressId>
<addressLineSeq>2</addressLineSeq>
<addressLine>myAddressLine2</addressLine>
<row>
<rowset>

Use XSU to store in multiple tables.
"XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

One arcive file currupted

Similar Messages

Maybe you are looking for