One big mess.

Ok so I accidentally jumped in my swimming pool with my Iphone 3GS in my pocket, well it dried out and started working so I tried to restore but so far I've gotten error after error after error.
It started with error 1606, then it went to error 1600, then error 3014, then error 21, and finally error 29.
Seriously whats the deal is there anyway I can fix?
Also it doesnt look like the water tags that are visible have changed color so do you think I could just take it in and say it stopped working and idk why and hopefully get a new one?

Here is my story from two weeks ago. My son did the same thing with his 3GS. Jumped in the pool with the phone in his pocket and didn't realize it. Swam around for 15-20 minutes. I got the phone (dead), put a blow-dryer to it and it restarted but couldn't stop rebooting and couldn't be restored for the same errors. Still had Apple Care extended warranty for another 11 months.
Went to Apple Store and Genius Bar. Told them the truth - son drowned his phone and I tried to dry it out and get it to work. They took it to a back room somewhere and took it apart to look at it. They were gone 15 minutes. They came back and said since we were honest about the phone and that we had Apple Care, they replaced the phone. Wow, was I surprised! Maybe it was because we were honest, maybe because they felt sorry for my son, or maybe because I buy quite a bit of stuff in there. Regardless, honesty still can be the best policy!

Similar Messages

I-pod touch 3.1.2 one big mess

I just received this as a present, and have been having nearly constant problems.
Here are the problems:
1. only the factory installed apps work
2. apps that are bought/downloaded only work randomly
3. when apps aren't working, they still appear on my ipod, but when I go to open them they will only open for about one second and then quickly close. the rest of the ipod does not crash, but nothing will get them open.
4. after resetting the ipod from the factory settings i was able to get some of the apps to work, but not all of the bought/downloaded apps would work. when i turned off the ipod and went through the whole
what i have tried:
1. shutting off ipod and turning back on- produces no difference whatsoever
2.calling the apple help people. very nice folks...they talked me through restoring it to the factory settings. this helped maybe 2 apps work. i restored again to the factory settings, and now no apps work. in all i think that i've tried restoring it about 5 times with varying degrees of minimal success
3. updating all related software
4. resetting settings.
none of these have worked. any other ideas?

You might try restoring one more time, but when you get to the point in the process where you're asked to re-load your last backup, don't do that. Instead, set it up as a new iPod because your backup could be corrupted. When set up as a new iPod you'll have to re-do all your preferences, web links, e-mail accounts, etc. but before doing that make sure your apps work after restoring as-new.

Not sure why but when i open a new tab my top sites are no longer showing not even a toggle switch it's just one big blank white page? how can i correct this ?

i did have my most visited sites in the pin ups yet for some reason or other not sure why but not when i open a new tab all there is, is one big blank white page. Not a toggle switch not even blank pin up thumb nails. Any help would be greatly appreciated. thank you

See this old question:
*[https://support.mozilla.org/en-US/questions/982051#answer-517878 /questions/982051#answer-517878]

How do I consolidate all of my events into one big group of photos so I can see them all?

The title says it all. How do I consolidate all of my events into one big group of photos so I can see them all? Instead a bunch of events.

drag them together
Or click on Photo in the source pane on the left and under the view menu uncheck show event titles
LN

Large form set: Deliver in portfolio, or build one big PDF?

Greetings, all--
I am using LiveCycle to recreate a set of 24 or so forms that were originally built in Word. My users download the forms, complete them on their desktops, then print and submit the forms in hard copy. Most users are not tech savvy. The forms must be very easy for them to access, open, navigate, and print. Most also function within severe hardware limitations (slow Internet connections, old machines, etc.). On my end, I have a rusty at best command of scripting and am new to LiveCycle. I know what I want my forms to do but am very slow at figuring out how to make those things happen.
I am working first to decide on how to deliver these forms. It looks like I will have to build one big PDF to get the form behavior I want (autopopulation of like fields, field calculation, etc.). Does that sound right? Or is it possible to set up each file as a separate PDF and package them in a portfolio and still get cross-file behavior like auto field population, sequential page numbering, etc.?
Any feedback on setting up big set of files would be much appreciated.
Thank you,
Virginia

Hi,
For what it is worth...
First of all consider what version of Acrobat/Reader the user population will have. Improved functionality comes with each new version. So you might end up including features in your form that won't work on the users' PC. In LC Designer 8.2 you are able to define the target version (in File/Form Properties/Defaults) and then check in the Warnings tab to make sure that the form will run OK in that version (eg no warnings);
If people don't have to save the form (or the data that they have typed in) then you don't have to worry about Reader Enabling the form. This gives the ability to users with Reader to save that (Reader Enabled) form. Useful if they are filling in the same form regurarly.
The implementation of Portfolios in version 9 is very good. However if users have older versions of Acrobat/Reader then it will revert to the previous implementation of Packages (less graphical) and users will get warning messages.
Keeping the forms separate will help performance; but may make it more difficult for users to locate the correct form. Creating one large form in LC is possible (and will make it very easy to share values across the 24 forms becuase they will be in the one XFA PDF); however if each form has multiple pages and there is dynamic hide/visible script then performance may be a problem. If the form is static (eg does not grow) then performance will not be as badly affected with the single form approach.
There is a work around to get forms to talk to each other (whether in a portfolio or not), but it requires a good bit of scripting and a cool head.
In summary, if you are working with static forms that will not grow (fields not extending to accomodate overflowing text) then I would go with one form.
You can always develop the single form for the time being and then at a later stage break it out into 24 separate forms.
Good luck,
Niall

Many small purchases, or one big one?

Hello, I'm actually really new to the credit world and just got two cards, a Chase Freedom and a Discover IT for Students. I want to get started building my credit and increasing my credit limit. I realize it's a slow process, (and maybe getting two cards at once wasn't the best idea) but I want to make sure I don't needlessly slow down this process.
My main question is, are many small purchases in a month better than just one big one, or does it even matter?For Example…
Chase Freedom CL: $1200
Discover IT CL: $1000I was hoping to use these cards to make payments on my tuition. If every month I only spend a $200 payment from my Discover card, is that better or worse than just buying 20 items at $10 apiece?Again though, the ultimate goal is to increase my CL and CS.

Great cards to start on. I wish I had gotten two in college. I just graduated and got my second. Like others have said, the amount of charges doesn't matter as long as you keep your overall and individual util at or under 30% which you would be doing at the charges you're describing. if need be, don't shy away from making multiple payments in a month to keep your util low while using the cards as much as you like (responsibly, and within your need/ability of course) while earning the rewards. Enjoy building. You're definitely off to a good start!

Variable number of two dimensional arrays into one big array

I have a variable number of two dimensional arrays.
The first dimension is variable, the second dimension is always 7.
i.e.:
Object[][] array0 = {
{"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"},
{"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"},
Object[][] array1 = {
{"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"},
{"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"},
Object[][] arrayi = ...I'm generating these arrays with a for-loop:
     for (int i = 0; i < filter.length; i++) {
          MyClass c = new MyClass(filter);
          //data = c.getData();
Where "filter" is another array which is filled with information that tells "MyClass" how to fill the arrays.
"getData()" gives back one of the i number of arrays.
Now I just need to have everything in one big two dimensional array.
i.e.:Object[][] arrayComplete = {
{"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"},
{"alice", "smith", 42, 160.0, "la", "bub", "[email protected]"},
{"john", "sdfs", 34, 15.5, "a", "bl", "[email protected]"},
{"joe", "smith", 42, 16.0, "a", "bub", "[email protected]"},
Any idea on how to accomplish this? It's blowing my mind right now.

Just brainstorming here:
Why not put your actual data in a class and store that in a LinkedList (so you know the total number of elements for your multi-dimensional array). Then initalize your multi-dimensional array and populate it? Haven't tested the following, but thinking something along the lines of
public class MyData {
     //data here
     public Object[] toArray() {
          //something similar to this
          return new Object[] = {"tim", "sanchez", 34, 175.5, "bla", "blub", "[email protected]"};
LinkedList<MyData> data = new LinkedList<MyData>();
data.add(mydata1);
//however many times you need
Object[][] arrayComplete = new Object[data.size()][7];
for(int i = 0; i < data.size(); i++) {
     arrayComplete[i] = data.removeFirst().toArray();
}Another option for knowing how many rows you would need might be using something like:
int rows = 0;
rows += array1.length;
rows += array2.length;
//etc...But is not entirely useful if you don't know how many variable arrays you have (although reflections might help if the name of the array variable is incremented systematically, someone told me earlier to avoid reflections since it could make debugging a LOT more difficult).
Edited by: bogdana on Apr 1, 2010 10:38 AM

One Big Ol' Report

Ok Here Goes
Here's my scenario - I have built several separate reports, and all have conditions on them so they only show based on a variable. They are matrix reports:
EX:
--Report 1 where PRODUCT CATEGORY = 'SHIRTS'
(SHIRTS)
PRODUCT          ATT1   ATT2   ATT3    ATT4
Cotton T-Shirt   Blue   Large Cotton Pre-Shrunk
--Report 2 where PRODUCT CATEGORY = 'SHOES'
(SHOES)
PRODUCT     PRODUCT SUBCAT     ATT1      ATT2     ATT3
Boots       INDUSTRIAL         12 Hole    Y        NI have a list (shown as tabs) across the top of the page and the user can view any of the reports for that category. The list just sets the category variable. I did this because each report has a different set of descriptive criteria to show. Shoes show the number of eyelets and whether they are designated as safety shoes, but that wouldn't make sense in the context of shirts.
My question is not about how to do the matrix reports, but rather how to get all of these report sections into one page and allow the entire set of pages to be downloaded to a PDF. Currently each small report can be downloaded to a PDF, but not the entire thing. Problem is I really can't do a union in the query because the number of columns I need are different, and the titles are dynamic.
So does anyone have an idea (short of using Oracle Reports) to get multiple separate report regions to print to one big PDF?
- 405 -

Why do you hide yourself behind a number? That's actually not nice and fair. And then,
you expect the others to help you with such a big thing.
I don't know much about .pdf, allthough I think it would work there as well - with some
HTML => XHTML => XSLT Stylesheet => XLS-FO to => PDF... conversions using FOP.
However, to get this into an excel file would be a piece of cake.
Denes Kubicek

More small datafiles or one big datafile for tablespace

Hello,
I would like to create a new tablespace (about 4 GB). Could someone if it's better to create one big datafile or create 4 datafiles with 1 GB each?
Thank you.

It depends. Most of the time, it's going to come down to personal preference.
If you have multiple data files, will you be able to spread them over multiple physical devices? Or do you have a disk subsystem that virtualizes many physical devices and spreads the data files across physical drives (i.e. a SAN)?
How big is the database going to get? You wouldn't want to have a 1 TB database with 1000 1 GB files, that would be a monster to manage. You probably wouldn't want a 250 GB database with a single data file either, because it would take forever to recover the data file from tape if there was a single block corruption.
Is there a data files size that fits comfortably in whatever size mount points you have? If you get 10 GB chunks of SAN at a time, for example, you would probably want data files that were an integer factor of that (i.e. 1, 2, or 5 GB) so that you can add similarly sized data files without wasting space and so that you can move files to a new mountpoint without worrying about whether they'll all fit.
Does your OS support files of an appropriate size? I know Windows had problems a while ago with files > 2 GB (at least when files extended beyond 2 GB).
In the end though, this is one of those things that probably doesn't matter too much within reason.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Many little datafiles or one big datafile?

Hi all
I have a database which grows every day. I have 10 datafiles with name users01.db , users02.dbf and etc.
And all these datafiles have 1.5Gb size. Each time every datafile reachs it's 1.5Gb size, I add new datafile. Is it correct strategy? Or I must add only extents to last datafile and allow it to grow?
Thanks...

Hi,
In my point of view, it is a good approach if "table striping" is used, where data is spread across more than one device. Otherwise, if you have just one disk, then I don't see advantages or disadvantages. In addition, take a look at [url http://forums.oracle.com/forums/thread.jspa?messageID=1041074&#1041074]more small datafiles or one big datafile for tablespace thread.
Cheers
Legatti

How can I divide one big long track into several smaller ones?

I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
How can I divide one big long track into several smaller ones?
Any input would be great.

lakergrl wrote:
How do I split one very long track into several tracks (audio journal split into each day)
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

Why no more clips and just one big .mov file?

I had been working in iMovie and iDVD 4 for some time up until present when I upgraded to iLife 6. One of the things I like about ver. 4 was that the whole movie was saved as a file but there were also the individual clips saved as well. I could use these clips when creating my iDVD project. Now I see that those clips are gone and there's just one big .mov file to drop into my iDVD themes. Why did they do this??? Is there some benefit to this that I'm not understanding? Maybe I don't have something set correctly in the prefs.? Is there anyway around this so that I have control over what part of a movie gets dropped into my iDVD themes?
-Daryl

Thank you so much, Matt. That did the trick. I would've never thought of that. I was beginning to figure that the clips just had to be somewhere else that wasn't obvious to me. I couldn't believe that they would do away with that. Thanks again!
-Daryl

Bursting - OUTPUT sends one big report, instead of multiple individual ones

Bursting - OUTPUT sends one big report, instead of multiple individual ones:
Data File below - shows report has the proper tags for the PP_NUMBER; which should split the job into individula files to be email, instead it creates one large file and emails it to the last email account
Please help!
<BCG_PPINVOICE_UK_ALL>
- <LIST_G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP100</PP_NUMBER>
+ <LIST_G_INVOICE>
<PP_TOTAL>-1965</PP_TOTAL>
<AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
<PP_INVOICE_CONTACT>HPA - Michael Palmer</PP_INVOICE_CONTACT>
<ADDRESS1>Porton Down</ADDRESS1>
<ADDRESS2 />
<ADDRESS3 />
<ADDRESS4 />
<CITY>Salisbury</CITY>
<COUNTRY>United Kingdom</COUNTRY>
<EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
</G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP101</PP_NUMBER>
+ <LIST_G_INVOICE>
<PP_TOTAL>0</PP_TOTAL>
<AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
<PP_INVOICE_CONTACT>Imperial College - Prof Wells</PP_INVOICE_CONTACT>
<ADDRESS1>Level 3</ADDRESS1>
<ADDRESS2>Sherfield Building</ADDRESS2>
<ADDRESS3 />
<ADDRESS4 />
<CITY>London</CITY>
<COUNTRY>United Kingdom</COUNTRY>
<EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
</G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP102</PP_NUMBER>

This is EBusiness - XML Publiser (Not Enterprise)
My Control file is as follows:
<xapi:requestset type="bursting">
<xapi:request select="/BCG_PPINVOICE_UKB_ALL/LIST_G_PP_NUMBER/G_PP_NUMBER/PP_NUMBER">
<xapi:delivery>
<xapi:email id="/G_PP_NUMBER/${PP_NUMBER}" server="localhost" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="/G_PP_NUMBER/${PP_NUMBER}" to="${EMAIL_ADDRESS}" attachment="true" subject="Becmanc Coulter Genomics - Prepaid Account Balance ">Dear Prepaid Account holder Please find attached the current statement of your account. If you have any queries regarding the statement, or wish to make a top up of the account please e-mail me directly at [email protected] Kind regards UK Finance Team</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="output="PP_STATEMENT_${PP_NUMBER}"" output-type="pdf" delivery="/G_PP_NUMBER/${PP_NUMBER}">
<xapi:template type="rtf" locale="" location="xdo://XBOL.BCG_PPINVOICE_UKB.en.US/?getSource=true"/>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9015277 on Sep 3, 2010 10:29 AM

Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file

Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file was created on a MAC and I am trying to open it on a MAC. Any/all advice is greatly appreciated as I am up against a deadline with this unopened file! Many thanks in advance, Diane

There's a good chance the file is corrupt. As whomever sent it to you to verify it opens on their end.

How do i import XML-project from imovie with the clips being apart? And not imported as one big clip...

Hello!
I have a problem with my final cut express. I want to import my project from iMovie (multiple clips in one project) without the clips together as one big clip.
Important: XML-from imovie
This had worked before but one day a note showed up at the screen saying:
If i choose yes the project becomes one big clip and if i choose no this error shows up:
and the project wont be imported.
Help me please! This has never been a problem before.
Sorry for the bad english, i am from sweden.
Thanks! //Karl Ekdahl

Hello!
I have a problem with my final cut express. I want to import my project from iMovie (multiple clips in one project) without the clips together as one big clip.
Important: XML-from imovie
This had worked before but one day a note showed up at the screen saying:
If i choose yes the project becomes one big clip and if i choose no this error shows up:
and the project wont be imported.
Help me please! This has never been a problem before.
Sorry for the bad english, i am from sweden.
Thanks! //Karl Ekdahl

One big mess.

Similar Messages

Maybe you are looking for