One card of 48 ports has been reloaded in Cisco 7600

Hi,
I've a Cisco7600 with some 10/100/1000 cards.
One of them has been reloaded by the Catalyst and appears the next message:
%C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Fabric channel errors)
What could be the cause or the faulty component?
Thanks.

Hi
Did u try inserting the same into another slot ??
if not can you just try that out and check ??
also can u try this command out in your box 10--the module number in which the card is installed
hw-module module 10 reset
it will be 12 in your case and i feel ur using 7613 over there.
also refer the reason and the recommended action recommended once you get this error message..
1. %C6KPWR-4-DISABLED: Power to module in slot [dec] set [chars]
This message indicates that the module in the indicated slot was powered off for the indicated reason. [dec] is the slot number, and [chars] indicates the power status.
Recommended Action: Your recovery procedure depends on the reason indicated in the message.
if nothing comes out would suggestto check out the same with the support peopl over there or take this up with TAC ...
regds

Similar Messages

ICM 8.0(2) - Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached

Hi,
I have an environment with ICM 8.0(2) integrated with UCM 8.0.2.40000 and IPIVR 8.02.11005.
The system are working properly but sometimes all the agents are forced to disconnect on the CTI OS Toolkit and all the functions are disabled then the agents just are able to log in again after restart and reset the extension mobility.
After analyze the logfiles of the CTI OS Server, I found the following messages:
16:55:04:171 unknown-ctios Trace: [agent.5000.5053] QUERY_AGENT_STATE_CONF ( eTalking ) : (PeripheralID:5000
AgentState:eTalking NumSkillGroups:2 MRDID:1 ICMAgentID:5097 AgentMode:1
MaxTaskLimit:1 NumTasks:1 AgentExtension:78112238 AgentID:5053
AgentInstrument:78112238 UniqueObjectID:agent.5000.5053
MessageID:eQueryAgentStateConf AgentAvailabilityStatus:0
SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
SkillGroupState:7) SkillGroup[2]:(SkillGroupNumber:37 SkillGroupID:5151
SkillGroupPriority:0 SkillGroupState:4))[CtiosBaseAgentObject,
T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29262]
16:55:04:171 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[15494] INFO MESSAGE, length: 86
16:55:04:187 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15494]: Changing ClientID
["15494"->"MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)"].
16:55:04:187 unknown-ctios Trace: --> RCV CLIENT[MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)] INFO MESSAGE,
length: 277
16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of
supported agent mode connections [2000] by one CTI OS Server pair has been
reached.
16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_REQ : (PeripheralID:5000 PeripheralType:0
AgentState:eUnknown AgentExtension:78112258 AgentID:5046
AgentInstrument:78112258 AgentPassword:123456 SkillGroups:()
UniqueObjectID:agent.5000.5046 MessageID:eSetSessionModeRequest
ClientAgentTemporaryID:agent.1357919595 ClassIdentifier:1 IsSupervisor:0
LastError:(dotNET_Sess(10041842)_EvtThd(164):0) ConnectionMode:1
CILConnectionID:15494 AutoLogin:0 SavedAgentState:9 WaitingforRecovery:0
SavedLoginInfo:() NonClientRequest:1 CurrentProfile:(null)
IsAgentTeamMember:0 SavedAgentId:5046
OriginatingClientID:MV8016-3056-dotNET_Sess(6925029)_EvtThd(71)
SilentMonitorTargetAgentUID:(null)
SilentMonitorCallUID:(null))[CtiosBaseAgentObject,
T_BASE_AGENT_QUERY_AGENT_STATE_REQ, 29262]
16:55:04:187 unknown-ctios Trace: [agent.5000.5046] QUERY_AGENT_STATE_CONF ( eAvailable ) : (PeripheralID:5000
AgentState:eAvailable NumSkillGroups:2 MRDID:1 ICMAgentID:5080 AgentMode:1
MaxTaskLimit:1 NumTasks:0 AgentExtension:78112258 AgentID:5046
AgentInstrument:78112258 UniqueObjectID:agent.5000.5046
MessageID:eQueryAgentStateConf AgentAvailabilityStatus:1
SkillGroup[1]:(SkillGroupNumber:1742 SkillGroupID:5000 SkillGroupPriority:0
SkillGroupState:3) SkillGroup[2]:(SkillGroupNumber:48 SkillGroupID:5362
SkillGroupPriority:0 SkillGroupState:3))[CtiosBaseAgentObject,
T_BASE_AGENT_QUERY_AGENT_STATE_CONF, 29263]
16:55:04:187 unknown-ctios Trace: CServiceBroker::ProcessEvent(): CLIENT_EVENT_REPORT_CONF
16:55:04:203 unknown-ctios Trace: --> RCV CLIENT[15484] INFO MESSAGE, length: 89
16:55:04:203 unknown-ctios Trace: ClientMgr[1]::IdentifyClientRequest, Client[15484]: Changing ClientID
["15484"->"MV4702-4160-dotNET_Sess(48095888)_EvtThd(1062)"].
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)], CLOSE
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)], CLOSE
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV11761-2720-dotNET_Sess(62684179)_EvtThd(475)][0x4dcdc08, CLOSE(),
Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)], CLOSE
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)], CLOSE
16:55:04:250 unknown-ctios Trace: CClient::Close: CLIENT[MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)][0x576e630,
CLOSE(), Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV6984-4620-dotNET_Sess(24727327)_EvtThd(529)][0x4f98000, CLOSE(),
Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)], CLOSE
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV6973-5644-dotNET_Sess(31599171)_EvtThd(1119)][0x66ba9f0, CLOSE(),
Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV6977-4236-dotNET_Sess(46292023)_EvtThd(158)][0x7572c10, CLOSE(),
Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)], CLOSE
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV11761-2720-dotNET_Sess(2094081)_EvtThd(773)][0x5ecf2d8, CLOSE(),
Calling OnConnectionClosed()
16:55:04:250 unknown-ctios Trace: ClientMgr[1]::OnConnectionClosed,
Client[0x0576E630][MV8015-5444-dotNET_Sess(9926532)_EvtThd(81)]
16:55:04:250 unknown-ctios Trace: XXX CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)], CLOSE
16:55:04:250 unknown-ctios Trace: CClient::Close:
CLIENT[MV6812-6004-dotNET_Sess(33915130)_EvtThd(140)][0x5508cc8, CLOSE(),
Calling OnConnectionClosed()
The message that caught my attention was the following: 16:55:04:187 unknown-ctios Trace: CRequestBroker::OnRequest(), ClientConnectionID[15494]::WARNING!!! Number of supported agent mode connections [2000] by one CTI OS Server pair has been reached.
But in our environment has only 250 agents
Anyone seen this before? Thanks very much

Hi Gergely,
I analyzed the following situation: when the agent logs in the CTI OS Toolkit the client opens a lot of sessions with differents ports.
Like the following example:
TCP    bbaproggerp1:42028     mv8011:4544 ESTABLISHED
TCP    bbaproggerp1:42028     mv8011:4545 ESTABLISHED
TCP    bbaproggerp1:42028     mv8011:4546 ESTABLISHED
TCP    bbaproggerp1:42028     mv8011:4548 ESTABLISHED
Where mv8011 is the hostname of the machine and 4544,4545,4546 and 4548 are the ports of CTI OS Client connected on port 42028.
When the agent disconnect of the application just one connection is closed then if it logs again another two connections will be open.

The ports has been used

Hi,
I am uninstalling my messaging 5.2 using ./uninstall. After uninstall process completed, i used rm -R to manually remove the ims folder. Then I tried to install messaging again but half way of the installation it will show me that pop, imap and smtp port has been used, i need to assign other ports to them. If i continue to use default ports, it will prompt me the ports have been used, but if i assigned other ports to them, the installation can complete successfully.
May I know what is happening? I have checked /etc, there is no msgregistry.inf file. What other files that should i remove? Please help.. thank you.

The problem is that the software is probably still running from your previous install attempt. You can telnet to one of the ports to see if this is the case, e.g.
telnet <mailserver> 110Should return something like:
Trying 111.222.333.444...
Connected to mail.siroe.com.
Escape character is '^]'.
+OK mail.siroe.com POP3 service (Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005))If that is the case, do a ps -fu <mailserveruser> and kill -9 the processes returned.
Michael
Hi,
I am uninstalling my messaging 5.2 using ./uninstall.
After uninstall process completed, i used rm -R to
manually remove the ims folder. Then I tried to
install messaging again but half way of the
installation it will show me that pop, imap and smtp
port has been used, i need to assign other ports to
them. If i continue to use default ports, it will
prompt me the ports have been used, but if i assigned
other ports to them, the installation can complete
successfully.
May I know what is happening? I have checked /etc,
there is no msgregistry.inf file. What other files
that should i remove? Please help.. thank you.

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

HT5163 i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.

i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.

i got in Manhattan from AT&T-
This error came after I updated the software since Apple confirmed and I have spoken with them and they confirmed it is officially iunlocked since I have full filled their terms of the agreement.
This phone was working earlier since i had jail broken it.
I have been using it with jail break for about 2 years now

CCP Discovery - NM-CUE-EC module has been reloaded

Good afternoon everyone,
I am trying to use Cisco Configuration Professional with a 2800. The following message is logged in Discovery Details whenever discovering the device:
NM-CUE-EC module has been reloaded. Please discover the device after the reload is complete.
Is there something I need to do to complete the reload, since this message is not going away on it's own?
Any and all assistance greatly appreciated.
Thank you!
-rob-

I encountered this same issue, and was able to resolve it by NOT checking "secure access" on the Community Setup page where you enter the user name and password.

HT3702 My registered credit card on my account has been taken off, I've tried to add a new card but it wont accept it. Why? Please could you tell me why? I want to add more music.

My registered credit card on my account has been taken off, I've tried to add a new card but it wont accept it. Why? Please could you tell me why? I want to add more music.

Unfortunately we can't but support can my friend.
https://expresslane.apple.com

I have time machine saving onto two usb drives. The backup is 4.6TB. Each drive is 6TB. Why is time machine only updating one drive? (The other has been the same for two weeks.)

I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...

You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

I have bought adobe photoshop lightroom 5 (a product code card). My identity has been confirmed. How do I download and install the program?

Hello:
I have bought a student and teacher edition of Adobe photoshop Lightroom 5. My identity has been confirmed. But when I was about to install (i believe), there was problem with the password. I have requested for the reset of the password. Now how can I get into the screen for the download and installation of my program.
Thanks.
Hasan Imam

you can dl and install using the link below. (you may as well dl/install lr 5.7.)
but you need your serial number to activate it so you can use beyond the 30 day trial period.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

8080 port has been used,why?

windows and solaris both has this problem.thanks a lot.
D:\j2sdk1.4.0\bin\javaw.exe -Djava.endorsed.dirs=D:\Program Files\Apache Tomcat 4.0\bin;D:\Program Files\Apache Tomcat 4.0\common\lib -Dcatalina.base=C:\Documents and Settings\Administrator\.IntelliJIdea\system\tomcat_GetDemo_8c6d0204 -Dcatalina.home=D:\Program Files\Apache Tomcat 4.0 -Djava.io.tmpdir=D:\Program Files\Apache Tomcat 4.0\temp -classpath D:\j2sdk1.4.0\lib\tools.jar;D:\Program Files\Apache Tomcat 4.0\bin\bootstrap.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jndi.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\activation.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jdbc2_0-stdext.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jta-spec1_0_1.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\tyrex-0.9.7.0.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\naming-common.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\naming-resources.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\mail.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\xerces.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\servlet.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\tools.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-default.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-http11.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-common.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\catalina.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-webdav.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-invoker.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-coyote.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-util.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\warp.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\jakarta-regexp-1.2.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\commons-logging.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-ajp.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-manager.jar;D:\j2sdk1.4.0\jre\lib\charsets.jar;D:\j2sdk1.4.0\jre\lib\jaws.jar;D:\j2sdk1.4.0\jre\lib\jce.jar;D:\j2sdk1.4.0\jre\lib\jsse.jar;D:\j2sdk1.4.0\jre\lib\rt.jar;D:\j2sdk1.4.0\jre\lib\sunrsasign.jar;D:\j2sdk1.4.0\jre\lib\ext\dnsns.jar;D:\j2sdk1.4.0\jre\lib\ext\ldapsec.jar;D:\j2sdk1.4.0\jre\lib\ext\localedata.jar;D:\j2sdk1.4.0\jre\lib\ext\sunjce_provider.jar;D:\j2sdk1.4.0\jre\lib\ejb10deployment.jar;D:\j2sdk1.4.0\jre\lib\j2ee-ri-svc.jar;D:\j2sdk1.4.0\jre\lib\j2ee.jar;D:\j2sdk1.4.0\jre\lib\j2eetools.jar;D:\j2sdk1.4.0\jre\lib\jhall.jar;D:\projects\classes org.apache.catalina.startup.Bootstrap start
Catalina.start: LifecycleException: null.open: java.net.BindException: Address already in use: JVM_Bind:8080
LifecycleException: null.open: java.net.BindException: Address already in use: JVM_Bind:8080
     at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConnector.java:1130)
     at org.apache.catalina.core.StandardService.initialize(StandardService.java:454)
     at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:553)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
     at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
     at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
----- Root Cause -----
java.net.BindException: Address already in use: JVM_Bind:8080
     at org.apache.catalina.connector.http.HttpConnector.open(HttpConnector.java:950)
     at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConnector.java:1128)
     at org.apache.catalina.core.StandardService.initialize(StandardService.java:454)
     at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:553)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
     at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
     at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)

I has tested "http://localhost:8080/" in my web browser,
it is tomcat home page.
This is my context.When I run the java projest,it reports the 8080 port error,
why?Thanks a lot.
This is GetDemo.java:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class GetDemo extends HttpServlet
public void doGet(HttpServletRequest req,
HttpServletResponse resp)
throws ServletException,IOException
resp.setContentType("text/html");
PrintWriter out=resp.getWriter();
String username=req.getParameter("uname");
String password=req.getParameter("userpw");
out.println("<HTML>");
out.println("<HEAD><TITLE>GetDemo</TITLE></HEAD>");
out.println("<BODY>");
out.println("Hello "+username+"<br>");
out.println("Your password was: "+password+"<br>");
out.println("</BODY>");
out.println("</HTML>");
out.close();
This is GetExample.html:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
"http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE>Get example</TITLE>
</HEAD>
<BODY>
<font size="4">
<center>Please enter your name and passwd then press Start<br>
<FORM ACTION="http://localhost/projects/GetDemo" METHOD="GET">
Name:<INPUT TYPE="text" name="uname" value="" size="20"><BR>
Password:<INPUT TYPE="password" name="userpw" value="" type="password" size=10>
<INPUT TYPE="submit" value="Start"><BR>
</INPUT></INPUT></INPUT></FORM>
<center><HR>
</BODY>
</HTML>
This is server.xml:



<Server port="8005" shutdown="SHUTDOWN" debug="0">


<Service name="Tomcat-Standalone">


<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="60000"/>






<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>







<Engine name="Standalone" defaultHost="localhost" debug="0">



<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Realm className="org.apache.catalina.realm.MemoryRealm" />





<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true">



<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common"/>

<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
     timestamp="true"/>




<Context path="/manager" docBase="manager"
debug="0" privileged="true"/>
<Context path="/GetDemo" docBase="d:\projects\GetDemo" />

<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
     timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>

          
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>user</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>driverName</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>


<Service name="Tomcat-Apache">
<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true" appBase="webapps"
acceptCount="10" debug="0"/>

<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">

<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>

<Realm className="org.apache.catalina.realm.MemoryRealm" />
</Engine>
</Service>
</Server>

My one-month-old $4100 MBP has been superseded by a $2800 model!!

I know, I know, you can't expect your computer not to become outdated when new models come out, but I'm literally in shock right now. Less than a month ago I shelled out $4100 for a completely maxxed-out 2.5 ghz 15" MBP with antiglare screen, 512GB SSD, and 8GB RAM. Now I learn that the new standard model comes with equal or superior specs (faster processor, better screen, thinner, USB 3, HDMI port, etc.) for $2800?! That is really outrageous, no? If I want to get the new MBP I will have to take a huge loss when selling my current one.

Every MBP owner suffers the same fate as you. As soon as you buy one, it simply a matter of time before a 'better' one comes out and displaces the one you have. It is a matter of degree and clearly you are at the high end of this phenomenon.
When I purchased my current MBP, I made certain that I got the fastest CPU available only to be outclassed by a faster CPU a month later. My irritation lasted about a day but I still had an excellent MBP and I no longer feel the least bit envious of any newer models that have been subsequently introduced.
You still have a first rate MBP and enjoy it.
Ciao.

Unable to redeem my gift card. Said it has been redeemed but I have never used it.

MY $25.00 Apple gift card says it has already been redeemed but I have never used it. What do I do now?

Hello:
I think the easiest way to get help would be to contact an Apple store.
Barry

How do I hide a pulldown menu if one of it's values has been selected but not others?

Through searching this forum, I've been able to figure out how to hide pull downs and fields that only have numeric info in them. I.e if the user selects. or if the pulldown value is zero. The item does not show or print on the form. What I cannot find, is how do you accomplish this if the values in the pulldowns are text? I.E. the pull down has three choices "choose an item", "ITEM 1", "ITEM 2". It defaults to "choose an item" and if left this way, I want it to be hidden or set to null, but if ITEM 1 or 2 are selected. Then it shows/prints ITEM 1 or ITEM 2 in the spot.
thank you for your help on this issue.

I figured it out
and need to give kudos to George Johnson due to an answer he gave in 2008 pointed me to the solution.
http://forums.adobe.com/message/1152008
First I assigned a calculated value to each of the text items.
Then here is my script.
// Get field value
var v1 = +getField("Description1").value;
// If the value does not equal 0 then use the value
if (v1 !== 0) {
event.value = v1;
} else {
//If the value does equal 0 then blank the value
event.value = "";
Message was edited by: AXNUCorp due to a funky cut and paste

***! I've just gone through instructions given by Apple support on attempting to fix a mic problem on video. I went through steps suggested by tech support. They neglected one critical step. Everything has been lost since itunes auto synced to the phone.

I had a problem with the mic not working on video. Common problem. I went through the steps recommended by the tech advisor. Which included backup the phone to iTunes (OK), restore as new iPhone (OK), Phone then asked me to go through a few steps as per a new phone (OK), iTunes IMMEDIATELY SYNCED iTunes to the new phone (NOT OK!!!!!), I lost everything!!!! Valuable irretrievable photos, contacts the works. I WILL NEVER BUY ANOTHER IPHONE!!!!! THIS IS UNBELIEVABLE. AND ON TOP OF THAT THE VID MIC STILL DOESN'T WORK!!!!

And by the way in case something thinks I'm a total idiot! Auto sync had been previously disabled. iTunes re-enabled it on its own. Well done R and D You've really screwed this one and it's going on social media big time. Stay away from iPhones and iTunes if you have one.

One card of 48 ports has been reloaded in Cisco 7600

Similar Messages

Maybe you are looking for