One cd will not burn

All of my CDs that I import and burn are at least 12 yrs old. I use Staples generic 1x-52x CD-R. Burn is set at max possible( for my Superdrive that is 16x). I have no problem importing into iTunes 6 bunchanumbers. I burn by making a playlist and clicking Burn. I have found that one CD out of the six I have tried will import and play, but will not burn. I get the error message that says it can't and will not retry.
Is this due to some sort of burn copy protection on that particular disk, or should I change to 16x setting or lower, or use a different import setting for just that disk? I have looked thru numerous posts here and have not found any that are like this "one disk" problem. I doesn't seem to me that a copy protection would work this way. Would it work on an 8x or 4x setting?
The recording is for the "Tomato" label, mfg and dist by Rhino, artist is singer Helen Schneider with the Bob Brookmeyer big band, recorded in Germany.
I've burned lots of data and movie cds and dvds, but this is my first foray into making copies of some of my collection for friends using iTunes.
B&W G3 Mac OS X (10.4.6) 512 ram, iTunes 6++, 80GB

It's conceivable that something like that might have happened in Toast, but not in iTunes. I'm going to try to burn with one track missing from the playlist, at 4x and see what happens. ClonyXXL did not report any copy protection in red, so even though I don't read German without a dictionary at hand, I don't think its copy protected, it's something else. It's funny the CD was made in Germany , and Clony XXL is German, you'd think it would help me, and maybe it has, but i can't read the notes.

Similar Messages

One song will NOT burn onto any cd

up until now i have never encountered such a problem. one song that i purchased from iTunes will not burn onto a cd. i've never had troubles before with any other song, just this one. i've tried complaining to the itunes help but i got some lame answer that didn't help at all. could it be possible to have the itunes store allow me to download it again without paying for it, i think they let me download a corrupt song. why would they do that?

My very strong advice is to give up. Certainly don't waste another second messing about with tags. I have not seen one scrap of evidence to suggest they have any effect.
From my experience, the only chance you have of getting it matched is to alter the waveform of your track so that it matches that on the store. I assume that yours is a different mastering or something. I'm no expert, bit I'd guess that your chances of hitting on the right adjustments could be best expressed as zero.

HT1567 i can't get a disc to burn,tried several different kinds and nothing.It will play a prerecored disc but will not burn one....what the ****?

i can't get my cd burner to read any blank cds so i can burn them.It will read a prerecored disc trnasfer it to the library but it will not burn a new disc

Thank you for the response!
I tried not to provide too much information so that it would be overwhelming. As soon as you complete it, let me know, and we will go from that point.
In addition, here is a random document from Macrium Software regarding VSS errors, if you want a little more reading and explanation: How to troubleshoot Microsoft Volume Shadow copy Service errors
Thanks and have a great day!
Mario
I worked on behalf of HP.

IDVD will not burn disc after QT update

IDVd used to work just fine. I did software update and updated Quicktime to version 7. I found that my Quicktime Pro key for QT 6 would not work with QT 7. I called Apple support and they told me how to revert back to QT 6. I followed their steps and successfully have QT Pro 6 back, but not my iDVD projects will not burn. It gets to stage 4 multiplex and burn and spins for hours. When I hit cancel, the disc ejects and is unburnt.
I have followed Apples steps to solve a no burn when you upgrade to iDVD 4.0.1 (remove encoded assets) and this does not fix the problem.

Hi Dennis
There is ways to delete all of QT and then make a clean install but the
easiest way is to download a back to QT 6.5.2 file from Apple support
and downloads.
I've done this and keep it till I get an upgrade that takes away the old
files before installing the new ones.
Yours Bengt W

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

I give up!!! iDVD will not burn a disk

I will try to give as much information as I can. I have been struggling with iDVD for a couple weeks. It will not burn a disk that has a complete menu. Let me explain. I've been testing it to see if it would burn a disk at various stages of development. It will burn a disk if I just import the video to iDVD with no menu. It will burn a disk with partial menu and chapters. But it will not burn a disk if I have an entire menu, with all the chapter markers, drop zones filled and music.
Help, please.
Thank you!!

Hi
Yes - info - but not really the one I would need. There are so much that can go wrong and in different layers (steps of progress)
A. First - What You feed iDVD - QuickTime-player can open and play so many more VIDEO-CODECs than iDVD ever can use (it is very picky)
B. There is the notorious - iDVD BUG - that set's of by going back to Video-Editing program (iMovie, FinalCut or whatever) - then returning to the iDVD project. iDVD will notice but non of the alternatives works - I create a brand new iDVD project - only safe way for me - AND THEN NO RETURN AT ALL !
C. What other material is used - for menus as Music, Photos and small Video sequences
D. What Theme was used
BTW - Creating a DVD without a Menu - You must be the only one I've ever heard that was able to do this - It is an often discussed topic here.
E. And if Your project now runs OK in iDVD - SAVE AS A DISKIMAGE (File menu down to bottom topic)
F. Does this .img file run OK (Simulated DVD)
G. Burn it with Disk Util tool.
H. On What BRAND and Type of DVD ? I only use Verbatim DVD-R (SL-Single Layer)
You see - that it is this kind of info that helps me to make, may be good Guessing's.
Yours wanting to be of help - Bengt W

My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpful

Try using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT

Track Will Not Burn From i Tunes

- I have one track on an album in iTunes that will not burn to cd because it is not authorized. The rest of the album will burn fine. The track will not play on iTunes or my iPod.
- My computer is authorized and long has been.
- I did not buy the track from iTunes. I burned the entire album as one set from the original commercial 2-cd set.
- Unlike the rest of the tracks, the one in question says "unavailable" in the track time (length).
- OS X 10.8
I'd appreciate any help on this.
Thank you!

Whether your computer is authorized or not shouldn't have anything to do with being able to play your own music, added from a CD.
When you check the path Musuc > iTunes > iTunes Media > Music is the track you want showing up? You could try moving it to another folder, then re-importing it to iTunes.
You should also try opening it with another media player just to make sure the data hasn't been corrupted - though it's probably an iTunes problem.
The obvious other thing is to try and add the track directly from the CD if you have it around.

Will not Burn HELP

Hey I am working on a very simple SD DVD project. Simple meaning one track, one menu with one button.
I import the DV stream file with the accompanying aiff audio track and target the one button to the track. I click burn and it just says "formatting finished" but it has not done anything. I can do the BUild/Format and it will make an MPEG folder in the destination on my hard drive with the .dv.aiff file and a PAR folder with a .m2v.par file inside.
I am at a loss as to why it will not burn to a disc. Can it not find my disc drive?
Using a MacBook Pro 2.4
Final Cut Studio 1.0
DVD Studio Pro 4.0.3
My G5 is getting repaired or I would test to see if it is a problem with FCS 1.0 on an intel chip.

Hi
My G5 is getting repaired or I would test to see if it is a problem with FCS 1.0 on an intel chip.
DVDSP 4.0.3 is not an universal binary application and will run under Rosetta in Intel machones, what can cause a lot of problems for sure !
Hope that helps !
Alberto

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

If they were songs you purchased from itunes, try redownloading them from your purchases...
if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

I attempted to update my iphone5 to 7.1.1 There was an error and now my phone is erased. I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

I attempted to update my iphone5 to 7.1.1 There was an error and now my phone is erased. I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said?

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Idvd will not burn after upgrade to maverick

Hello-
I just upgraded to maverick and now iDVD will not burn a DVD - says it does not have a compatible superdrive. It was working fine until I upgraded. How can I burn a nice DVD now?

Suggestion only. Before launching, did you also check for updates via apple's software updater?

One cd will not burn

Similar Messages

Maybe you are looking for