One-Click Subscribe question

When I see a podcast I would like to subscribe to, there is usually a link something like:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=74204997&s=1434 55
And when I click on it, a window comes up asking if I want to save the file, or cancel. It would seem that it should launch into iTunes and subscribe the feed. Do I have a setting or flag fouled up someplace where Windows or IE does not recognise this link as an iTunes directive?
Thanks in advance,
Frank

Thanks, but that does not work either. If I copy the above link into the subscribe window, I get the following error:
There are no playable episodes for <link>
The URL might point to text-only episodes, or contain file types that iTunes cannot play.
Any other ideas?

Similar Messages

  • I have a 990XA-GD55 With One Click Bios II-Am I alone?uefi?

    I created a post not to long ago asking for help with a situation. I bought a new Board 1 week ago. Board was Brand new, never opened...
    """This Board Is Not suppose to Have A Uefi Bios.....This Board is Not suppose to have One Click Bios II........"""""""""
    The only reason I bought the board---The company I went to purchase, Had a deal on another board with a Pile-driver Processor. I am the type that will read and read, till I know everything about an item before I purchase..Found out that most of the time, you can purchase a combo and find out that the bios has not been updated for the cpu. Only way to fix, buy an older or cheaper cpu and update. I talked to the salesman and come to find out ,the combos they were offering had the same issue..This board had the uefi Bios...I did not want to go threw the head ache, so I opted for a different board..I was told it had no uefi Bios...and I was fine with that, It was a better Board. But than I found out that it too, was not ready for the pile driver...But it was ready for the bulldozer. I have owned the same cpu before. So I purchase The bulldozer and this board-990xa-GD55....
    Brought it home-read up on it.....Read it did not have uefi bios...and that was fine...Built the unit top to btm.....Booted it up or hit the power button.....For some reason it took about 30-60 sec to come on. But once it did...I hit delete too get to bios..Guess what I seen--One Click Bios 2..That was weird but ok...download windows 7 all my drivers, all my updates...But I could not find the download for one click bios on the site or on the cd....and everywhere I read claimed that this board was not to have this bios. I even wrote a post here asking about the download...What I was told---This board does not have uefi Bios....So I responded with a pic of my bios and I have not heard back..
    I would like to hear from users just like me on this subject..Do you have the same Bios I have? It says One Click Bios II...I am not complaining...This board runs awesome and does everything I need it to do. I am very pleased. I wish I could get the download to have one click on my desktop..Like my other-boards...I am not a newbie to building, and I have had this bios on a few different computers. I would just like to hear, if you might have the same bios...and any issues you had when updating...I am scared to update the bios..I probably will not do it..I would hate to lose this feature.
    Thanks for reading and sorry about my Grammar and spelling....
    Update--I have been beating my head over this...I know MSI says we are not suppose to have this bios....But if you look up this in Google..
    Can't change CPU voltage on MSI 990xa-GD55 Mobo
    Look at the screenshot....That guy is using one Click Bios 2----tooo........
    I have a feeling that alot of people that buy these boards are new to this bios feature, and just don't know better...This is suppose to have the older version of Bios....Not one Click 2...Guy in this post as the same bios as me.....Maybe if enough of use tell these guys we have it--They will include a download for it on Windows...On my other boards...I have one click bios on the board and can access it in Windows with a simple download....Thanks MSI for this feature...But please hook us up with the download too.......I would use the download from another board-But I know better...so I can wait till MSI offers....

    If you are reading this and you are like me. You came here for answers. From what the guys here are telling me and from what I have read. These boards are not advertised as having the bios. When I purchased this board I was told that this did not have it. Than in my other post I was told this did not have it. But after a long winded Post. The Msi Tech said these boards come with it and that this model does not support the One Click Bios 2, in windows, Like there other boards. To me that really makes no scene, But I don't make the boards. I am sure these guys can write a program to take advantage of this awesome feature. I did some more hunting and amd has nothing to do with it, so i am assuming it is just this chip-set. To me this really make no scene. But having this bios was Bonus. If you read online or any review-either the person writing the review really never used the board, or maybe he never tried the bios. But I found numerous reviews claiming this board was missing this uefi and it only came with traditional Bios. 'Makes You wonder".........But I am over it....If your wondering these board do come with the uefi Bios but not advertised..advertised as having the older traditional Bios. Hope they will come out with an update for the one click Bios feature in Windows soon.....works out nice when you need to dbl check setting with out resetting your computer..
    As for Ram--I asked about using 2133....One the many Msi Boards I have used in the past. There boards have a feature That allows you to just tick what frequency you want to use and than it will set the timing for you. I understand that Your memory controller is in the chip...But this program is in the bios. On This board the Highest is 1866...But when pressing 1866, it will not run it stable. sometimes it wont even post. The ram I am using is g.skill 2133 and i have used it in tons of there other boards with no issues. I have even used it in another bulldozer set up at 2133, Different board....Ran well. This board Can use 2133 easy, but in order to do it you have to go in and set the timing and voltage...Not a big deal for those people that do it all the time. But I like the one click and go. Even though one of the ticks is 1866, this board will need adjustment...so anything over 1600 will need to be done manually. My original question was this board says it can take 2133oc...I am one of the few that know nothing about setting timing and voltage, But with this board I am learning...if any of you have this board and this ram.....f3-17000cl11-4gbxl........Let me know what you set yours on to run at 2133....I have already tried----
    11-11-11-31-41"1t and 2t" voltage 1.6.......and it does not run stable.....Maybe I just lucked on on my other board, but I do not own it no more to compare...I would like to hear how you got yours to run stable.......I don't need it.....I just want to do it...
    Thanks for reading and sorry about my spelling and grammar.....
    Google----990xa-gd55 Uefi Bios review--------

  • Is there a one click save all edits to copies of photos option?

    HI,
        Assuming... I have this correct... is there a way to export and merge all your "edits" with your photos and save them as copies with one click rather than individually / one at a time? 
    Why?  Ultimately so I can save my resulting good photos... thousands... as copies that I can use with other apps... or NO apps.
    But why?   OK, I am new and uncomfortable with the file system in lightroom.  The way I understand it is you create a catalog, basically thumbnails of your images on your drive.  Then any edits you do become part of a metafile, which is a large database of all your edits for all your photos in one file.  When you pull up an image from a "catalog" (assuming you have not moved it) LR pulls up the image and combines it with the edits you made from the "metafile" to show you your edited photo.
    OK, but why?   Because I use other software and AFTER my year is up, I may not renew. 
    The file system seems geared to make you dependent on Adobe and frankly, if that is so, it bothers me greatly.  (Wait till SharePoint catches up to us.)
    1) do not want my modified images locked up or my edits inaccessible.
    2) I would like to try and learn it Adobe's way, and not have multiple copies all over the place.
    3) but I am going to have to give up my hierarchy and easy way to find and save pics to do it Adobe's way  (which I still do not completely understand.)
    4) There are some things I do very easily with Photoshop and Cannot use Adobe until I figure them out... if at all possible.
    SO before I commit to a years purchase.   Can someone answer my rather direct question as stated in the first two lines.
    Thank you,
    Kevin
    I am old school, been using computers since before the 286's and the catalogs and this proprietary stuff is confusing because I have not found an explanation that helps me ask the right questions or explains it the way I need it.  So, aside from the intro training videos... if anyone knows a information source that is useful, direct, to the point (that does not make you sit in your chair going ... My God, I have other things to do today, get to the point... Please share.  I will consider every link.  (I am used to being the Go To guy and this is frustrating.)

    Because I use other software and AFTER my year is up, I may not renew.
    In which case, all parts of Lightroom except develop and map are still available to you, indefinitely, which allows you to export your edited photos from Lightroom after you stop paying the subscription.
    Is there a one-click way to save every edited photo? No, but you can do it with multiple clicks (Select All Photos, File->Export, set the desired options, click on Export), and even given all of your misgivings about Lightroom (which many people share and many people don't share), that seems to me like overkill. Worst case scenario: you stop paying your subscription and then you can still perform this export at that time.

  • Word 2013 - MSI Install vs. One-Click Install - COM Exception Error

    Hello -
    we have a 3rd party control that sits on top of word to render word documents.  In a MSI installation of Word 2013 everything works fine.  When we use the one-click installation the rendering does not work and the system throws a com exception
    error.
    it basically says "The document is not associated with an ActiveX Document server.  at OfficeControlLIB.IOfficeControl.OpenLocalfile...
    there is a suggested fix @ http://stackoverflow.com/questions/19778211/office-2013-click-to-run-installer-and-activex-issue/26890815#26890815 
    where you modify the registry to insert :
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{F4754C9B-64F5-4B40-8AF4-679732AC0607}\DocObject]
    into the registry - however this did not work (note we looked up the CLSID for our OCX and replaced.
    Any ideas?

    Hi,
    So it's a 32-bit version of Office which is running on a 32-bit version of Windows, try to omit
    Wow6432Node from the registry keys and see if it works.
    It's a 3rd party control, there is no way for us to understand how exactly it works. I'd suggest you contact the vendor support of that control for further assistance.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How can I create a one-click download for a PDF file?

    I want to have several PDF files on the website ... for downloading. How do I create a one-click download button? for those who don't know about control-right-clicking to download something?
    Does such a possibility exist?
    Ben

    Hi Quicktime Kirk,
    Thank you. And that leads me to another question: I've used the zip function before, with the idea of making a smaller file for transfers; but the PDF I get from Pages doesn't seem to compress any more when supposedly further compressed by .zip. Meaning, same size files.
    Is this supposed to be like this? And, just so I understand, the file needs to be a .zip file for this one-click function to work? Have I got that right? Or will it work just as well with the .pdf file? Given there is no difference in the compression.
    Ben

  • Save button is not working for ONE CLICK ACTION

    Hi All,
    We have embeded a custom table view in a standard component.While we are editing the first row of the table view by ONE CLICK ACTION & pressing the SAVE button of overview page,then the record is saved in the database. But if we edit any row other than the 1st one,the save button is not working.
    We have used transaction context here for simple object.
    lv_tx_ctxt = lr_ent_bt->get_transaction( ).
    my_tx_context->add_tx_context( lv_tx_ctxt ).
    Please suggest how we can focus on the current line which we are editing & can save the record in database?
    Thanks.

    Hi Hakan,
    Probabaly this is not my problem. I know that how bt one click we can get the desired row.
    Let me briefly explain you my requirement and currently where I am stuck.
    I have a assignment block ( custom) in the main overview page with a custom table view ( ie in the view we are displayng entries in the table view ) and the user can press edit button on any row and that will open the particular row in edit mode . User will change the value in any of the columns and press save button on the main component and the custom changes will be saved in the database.
    Now the problem that we are facing is when we are chnaging the first row it si working but when we are doing chnages in the 2nd row or 3rd row changes are not saved ( not even in the table view that is getting displayed) .
    *Let me briefly tell you the approach that we took  . Since our table view uses a simple object  ( which is not a related object with BTORDER so we need to explicitly save the simple object entities to transaction context and for doing that we have redefined the eh_onsave method in the overview page) .
    *Now the save button is in overview page so to pass the entry from our custom table view to overview we are using custom controller . The custom controller 's collection wrapper only has the first entry of the table view custom_controller->collection_wrapper->get_next is failing which is the reason why the 2nd entry is not getting saved.
    Can you tell me how i can get all the table entries in my custom controller's collection wrapper?
    Let me know if you have any other questions.

  • Opening a folder with an application in one click, and automating Terminal

    A forum member kindly recommended I move a question from 'Mac OS X Leopard' to this sub-forum as it was more appropriate to Unix:
    Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
    Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
    1. Load Terminal by clicking on the icon in the dock
    2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
    3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
    4. 'CMD + T' (to open up a new Terminal tab)
    5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
    6. 'autotest' (to runs the tests in the rails application)
    7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
    If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
    Cheers

    you can try this applescript. just copy it into the Script Editor and save it (1) as a script application that you can double-click, or (2) as a script that you can run from the script menu or quickkeys or etc. may need some tweaking...
    <pre class="jive-pre">tell application "Terminal"
    set cmd to "cd sites/rubyonrailsapp; mate ."
    do script cmd
    activate
    end tell
    tell application "System Events"
    keystroke "t" using command down
    end tell
    tell application "Terminal"
    set cmd to "gitk --all & autotest;"
    do script cmd
    activate
    end tell
    tell application "System Events"
    keystroke "t" using command down
    end tell</pre>
    to solve your other question, you'll probably need to script textmate. something like:
    <pre class="jive-pre">tell application "TextMate"
    open alias "path:to:folder"
    end tell</pre>
    I don't have textmate to test it on, however.
    sorry it's not a unix solution, but the task you're trying to accomplish fits better with applescript.
    Message was edited by: twtwtw - sorry, wrong quote style...

  • Opening a folder with an application in one click, and automating a process

    Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
    Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
    1. Load Terminal by clicking on the icon in the dock
    2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
    3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
    4. 'CMD + T' (to open up a new Terminal tab)
    5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
    6. 'autotest' (to runs the tests in the rails application)
    7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
    If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
    Cheers

    Thanks
    Here's the new post;
    http://discussions.apple.com/thread.jspa?threadID=2070033&tstart=0

  • Download and convert Youtube video to MP3---Just with one click

    Download and convert Youtube video to MP3---Just with one click
    Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
    I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
    Download, convert Youtube to mp3?—yes, you can.
    Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
    Step one: Install a Youtube Converter for Mac as follows:
    Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
    Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
    Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
    Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
    Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
    Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..

    Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

  • Delete photo's from organizer catalogue AND disk with one click?

    Hi,
    When deleting photo's from the organiser, PSE asks if i only want te remove the file from the organizer catalogue, or as well from the disk. In fact, i always want to do that. Now, it takes 2 clicks to confirm to delete a photo, which is time-consuming.
    is it possible to delete photo's from the organiser as well from the harddisk with one click? (or, just by clicking 'delete'.)

    fatmax3m wrote:
    Well, thats your opinion. IMHO, it's truly crappy. When sorting out photographs, en wanting to delete a hundred, it's really not convenient having to do all those extra clicks.
    I think Adobe should offer some tweaking features, for questions like this...
    But, thanx for the answer.
    If your main issue is to delete rapidly hundreds of files from disk, there are better ways in the Organizer. Did you notice that deleting a single file from catalog and disk is slow ? Even  deleting a dozen of selected files from disk (a single additional click) is slow. So, the best choice is to work in two steps. The first one is to select all the files to be deleted (a hundred, a thousand...) and mark them in some way : using the 'hide' feature, assigning a 'tobedeleted' tag (immediate even for dozens of selected files); then with all the files selected, delete from disk (and go drink a coffee...).
    I won't discuss the obvious question that those last methods let you check all possible deletions before committing the undoable choice

  • 990XA-GD55-One Click Bios 2 In Windows Download? 2133 DDR3 Ram?

    I am new to this site.I have been using these boards for awhile now..I noticed that most of my builds, that have one click bios 2...will have a download for one click bios 2, that you can use on your desktop..I like this feature and i have used it on a few other computers I have..Works great. So I purchased this board--The board when i purchased-showed that it had no ufei bios. But I decided to purchase it anyways..When I got it home and put the system together..I booted it...First cold boot kind of scrared me.Took a long time to boot.Just the first time...After that kind of boots normal. A little slower than my other Msi boards.But still fast.....Once it booted-I got into bios and there it was, On Click Bios 2.....what a surprice......Very Happy.....But>>>>>>>
    I download Windows 7 and all the updates....downloaded all the drivers....Download all the MSi Utilities....But one is missing...On my other boards with one click bios 2..there is a download, so you can use the bios in Windows...But there is not one on the site or on the disk..So I hunted for a post that could explain why and I don't see it...and i can not find nothing...When I downloaded Contol Center--Like my other boards..I see the little sign in the top right corner for One Click...But I don't have it downloaded....Man that was way to winded to ask a dumb question...
    Can I download one click Bios 2 from another board"site"..so i can use it on this board...and why is there not a download for it already....I am sure it is compatible...It has One Click Bios 2 as the main Bios...There should be a download on the site..with this Board...
    Second Question-----I try and make it a point to use High Freq Ram around 2133....so I read online that this board take it OC'd...Figured it can take it too...So like my otherboards..I went into Bios and looked to change it..but the highest settings, was the 1866....so I clicked it...and changed it from auto....Computer rebooted and would not post....so after I reset the bios---I tried 1600..and it did post....How do I get it to run at 2133...
    I have a FX 8150, and i know it can handle the 2133....Is there a step that I am skipping...I would be happy if I just ran it at 1866...
    I have never set timing before or Voltage...I have never tried to overclock....If it don't just have a simple tick for it...I am at a lost...Ram i am using is G.Skill F3-17000cl11-4gbxl----2 sticks...total of 8 gbs....
    Sorry for my grammar and spellling...sometime my fingers type faster than my mind.....

    Sorry if I am being difficult......My board...990XA-GD55....Bought from Frys a week ago has Uefi Bios....I promise...It has one Click Bios...I will take a pic and post it for you once my camera charges........Trust me when I read up on this board..It is saying that it does not come with it....I have Click Bios II...Trust me......No matter what the link say...It is on my board..I have not updated the bios or anything, because I thought this was weird that every site i see says no uefi Bios......Cpuz reads it as 990XA-GD55(MS-7640) Bios AMI V22.2...........
    Trust me when i tell you- I wanted the deal frys had on the new Piledriver and board, but when we looked it up...The boards Bios was not updated to take that new cpu///////so I decided on this one, even though it did not have the uefi Bios....Than found out this board was not ready for the new cpu...so i ended up taking the bulldozer 8150......But I will shut this computer down and take a pic for you....I am not complaining.......Just wondering why????and if I do--why there was not a download for it on windows like my other boards I have built....This is the 6th MSI Board I have built in the past 3 months....
    as for the Ram..I understand that the processor has a memory controler...I have a buldozer 8150....never faulted the board...I was just asking why it will not post on 1866....The board can take 1866 and under 2133 oc....But this will only run stable at 1600.....I can run 1866 but I have to tweek the settings...I hope that made sence...usually on my other boards..I can just tick the speed and the board will figure it out..I am running the same ram in this board ....z77ma-g45..and it had the setting for 2133........The issue when I tick 1866...this board will not post...I will have to just set the timing and voltage to run 2133...and that is not an issue...
    please understand...I have no issues with this board..I have no issues with this ram...I am looking for answers..The Bios has got me thinking ..I will take a pic and post for you..Thanks for your quick responce...
    update--I could not figure out how to get pics on this site...so here is a photobucket....This is a pic of my bios...version e7640ams Version 2.22
    http://i1279.photobucket.com/albums/y526/njfulwider5/DSCF4711_zps62a30549.jpg
    I can add more pics if there is something you need.....I am as confused as you--I have hunted everywhere to find somebody that has the same issue as me...I like the idea of it being here...so updating the bios is not an option...I would hate to loose it.....Please if you are reading-please give me a confirmation if you have a board like this too---------Now that I proved I have it....why do i have it....and can i download the oneclick bios 2 for windows.....When I bought the board..It was wraped...never used...I was the first user..It came like this right out of the box.......

  • Save - PDF - Print (Scripting to do in one click)

    Hi, have a workflow question for you script-writing gods.
    Is it possible to create a script that will automate the process of saving a document, then saving a PDF of that document, then printing that document out?
    Right now my manual process is:
    Save the file
    Save the PDF (I have a custom preset PDF setting I use based on Smallest File Size, but with Crop Marks on, Information on, Document Bleed on)
    Then I print the document out (I use 1 of 3 possible presets, custom made based on the document.)
    If I need to set up 3 different scripts depending on the print out, that's fine, it would still simplify the process down to one click.
    I haven't done any scripting before, so I haven't a clue where to begin or if any of the above information is enough to get something started.
    Would love to hear any helpful feedback to get me started, at least.
    Thanks!

    app.activeDocument.save();
    app.activeDocument.exportFile (ExportFormat.PDF_TYPE, app.activeDocument.fullName+".PDF", false, "My Export Preset");
    app.activeDocument.print (false, "My Print Preset 1");
    Change the Export PDF Preset and Print Preset names to the ones you are using.

  • My iphone 4s is disabled and I never synced it to anything (Reposting because I accidentally click answered question.)

    (Sorry to repost thing I accidentally click answered question )
    I just added a password to my iPhone 4s yesterday and guess what? I forgot it. I kept guessing and guessing until it was (and is now) disabled. I tried the restoration method but it says I need to enter my password. But for some reason it still says on my laptop that I am installing a software update (I am on iOS 8.1 and was going to update until this happened.). My iPhone does not say sync in progress or anything like that, it just says 'iPhone is Disabled Connect to iTunes' Will it work after software update? What do I do?

    Hi briana171,
    Welcome to the Apple Support Communities! I understand that you have forgotten the passcode to your iPhone 4s and it has been Disabled. The following resource will make you through the steps to resolve this issue, specifically erasing your device by one of a few methods:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    http://support.apple.com/en-us/ht1212
    - Matt M.

  • Is there a way to disable files opening with one-click?

    This is driving me crazy! I thought previously the problem was "magic mouse" but now that I've gone back to my old mouse, the problem persists. If I select a file in a finder window, it opens with one click. Also, if I try to edit a file name or even the question I've written above, I can't just insert the cursor and replace 1 letter. It picks the whole word, then the whole sentence. I never had this trouble before updating to the lastest and "greatest" snow leopard.

    Are you using a wired mouse, if you are then go to sys prefs/mouse and change the double click speed.

  • I cannot do the 'all in one click' feature on Farm Town Gift Links. Can you tell me whats wrong? this occurred after upgrading to 5.0.

    I upgraded to 5.0 and now I can't take advantage of the 'all in one click' feature.

    See:
    *[/questions/840221]

Maybe you are looking for