One clip delayed for colorimetry / Affichage du plan précédent pour l'étalonnage

Hi
it was possible to look on the previous and actual clip on a same window in real time on FCP. That was really helpful to adjust colorimetry from a clip to another? Is that possible with Premiere without using Speedgrade?
Bonjour,
Il était possible de coupler l'affichage de l'image courante et du plan précédent dans la même fenêtre sous FCP (donc deux moitiés d'image dans la fenêtre programme). Ce qui permettait lors de l'étalonnage de vérifier si le plan présent était raccord visuellement avec le plan précédent et ceci en temps réel. Existe-t-il un équivalent sur Premiere qui me permettrait de vérifier le plan précédent ou suivant en temps réel (donc sans passer par Speedgrade ou sans devoir rechercher manuellement le plan dans le moniteur de référence)?

Couple of suggestions:
1. Get rid of everything else except the earth and moon. You have too much happening at one time to figure out what is wrong.
2. Re-post the new slimmer version of your code using the [code ] [code ] tags (without the space after the word 'code') so I can read it. See http://forum.java.sun.com/features.jsp#Formatting for more help.
3. Don't use .jpg files in your example. I don't have those files so I can't compile your code on my machine.
4. If you are getting any errors, post the entire stack trace.
fitz

Similar Messages

How do I swap one clip for another in Final Cut Pro 7?

How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

I am trying to use two very long (2.5 hour HD) clips in multicam but FCPX only places one clip right after the other and does not create multicam. Is there a limit on clip size for multicam?

I am trying to use two very long (2.5 hour HD clips) and a 2.5 hour audio clip in multicam. One clip and the audio will ceate a multiclip but two clips will not. FCPX simply adds the second clip on at the end of the first. There must be some sort oflimitation on clip length. Is that correct and if so what is it?

The Angle field is not shown in the Inspector's default Basic View. With the clip selected in the event viewer, select the Info tab in the inspector. Change the view of the inspector from the default Basic View to the General View to be able to see the Angle field.
I assume you want to use the audio to do the sync. If FCP X has trouble syncing the audio, you can set a marker at the same chronological point in each clip before creating the multiclip. Then set Angle Syncronization to First Marker on the Angle and keep Use audio for syncronization checked. Your marker only needs to be close to get FCP X started. It will then use the audio to get final sync.

Suggestions for blending audio from one clip to next?

I'm learning editing and PP and am practicing by editing different clips from a movie to make my own trailer. The problem I'm having is that going from one clip to another has obvious and abrupt changes. I could add audio transitions to each clip, though for a 2.5 minute trailer I'm not sure if fading audio up and down constantly is the best choice? What is the best way to blend the audio from one clip to the next?
Thanks.

You can create a crossfade (essentially an
audio dissolve) from one audio clip to another.
With the audio track(s) targeted, park the Playhead at the
audio cut and hit Ctrl+Shift+D (or drag from the effect panel):
You need to be sure you have sufficient 'handles'
on both clips to accommodate the crossfade.
Creating an audio crossfade
http://tv.adobe.com/watch/learn-premiere-pro-cs6/creating-an-audio-crossfade/

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Hello. I paid twice for Creative Cloud Photography plan (one-year).

Hello. I paid twice for
Creative Cloud Photography plan (one-year). How to return a second payment?

This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Maybe try
Contact Customer Care

Changing playback quality to 1/4 does not work for this one clip...

So, I've recently ran into a really annoying problem when editing one of my videos, even though I click the 1/4 playback quality, this one clip still plays in full. My recording setup has not changed, I still and have always been using my iPod Touch and this is the first time I encountered this

It's likely that the resolution of the footage from the iPod Touch is much higher than the rest of your clips. In this case, the other clips will appear to be much more pixelated than the one from the iPod when you turn down the playback resolution.
Rest assured that the iPod footage is being affected by the resolution setting, even though it might not be as visually obvious as the other clips.

IP-sla udp-jitter / one-way delay no output

Hi *,
i have a question regarding "ip sla udp-jitter".
On some connectins i get an output for the "show ip sla stat" for the _one-way delay_
on other links i don't get an output. The Configuration is always the same and the Probes are running.
NTP is configured but in my opinion the fact weather i get output for the _one-way delay_
or not depends on the ntp root despersion.
Is there a max allowed time differances between the two routes ?
Here one working / one not working output of the same Router but different peers:
Not working::
Latest operation return code: OK
RTT Values:
Number Of RTT: 100RTT Min/Avg/Max: 11/11/13 milliseconds
Latency one-way time:
Number of Latency one-way Samples: 0
Source to Destination Latency one way Min/Avg/Max: 0/0/0 milliseconds
Destination to Source Latency one way Min/Avg/Max: 0/0/0 milliseconds
Working:
Latest operation return code: OK
RTT Values:
Number Of RTT: 100RTT Min/Avg/Max: 12/13/14 milliseconds
Latency one-way time:
Number of Latency one-way Samples: 100
Source to Destination Latency one way Min/Avg/Max: 6/7/8 milliseconds
Destination to Source Latency one way Min/Avg/Max: 5/6/7 milliseconds
I hope one of you can help me to find / fix the problem,
Thanks in advance / Emanuel

Hi everyone,
I have the same doubt.
I did a ip sla configuration on 1841 and 7206VXR and don't show nothing in one-way delay.
----------------------7206---------------------
-ip sla monitor responder
-ip sla monitor 1
- type jitter dest-ipaddr 10.9.105.14 dest-port 16384 source-ipaddr 10.8.20.102 codec g711alaw
- tos 184
-ip sla monitor schedule 1 start-time now
-ntp peer 10.9.105.14
HOST)#show ip sla sta
Round Trip Time (RTT) for       Index 1
        Latest RTT: 507 milliseconds
Latest operation start time: 10:57:36.619 UTC Sun Oct 10 2010
Latest operation return code: OK
RTT Values:
        Number Of RTT: 1000             RTT Min/Avg/Max: 125/507/846 milliseconds
Latency one-way time:
        Number of Latency one-way Samples: 0
        Source to Destination Latency one way Min/Avg/Max: 0/0/0 milliseconds
        Destination to Source Latency one way Min/Avg/Max: 0/0/0 milliseconds
Jitter Time:
        Number of Jitter Samples: 999
        Source to Destination Jitter Min/Avg/Max: 1/1/6 milliseconds
        Destination to Source Jitter Min/Avg/Max: 1/5/23 milliseconds
Packet Loss Values:
        Loss Source to Destination: 0           Loss Destination to Source: 0
        Out Of Sequence: 0      Tail Drop: 0    Packet Late Arrival: 0
Voice Score Values:
        Calculated Planning Impairment Factor (ICPIF): 17
        Mean Opinion Score (MOS): 3.84
Number of successes: 38
Number of failures: 0
Operation time to live: 1347 sec
-------------------------1841-------------------------------
-ip sla monitor responder
-ip sla monitor 1
- type jitter dest-ipaddr 10.8.20.102 dest-port 16384 source-ipaddr 10.9.105.14 codec g711alaw
- tos 184
-ip sla monitor schedule 1 start-time now
-ntp peer 10.8.20.102
3383)#show ip sla monitor statistic
Round trip time (RTT)   Index 1
        Latest RTT: 614 ms
Latest operation start time: 10:50:50.491 UTC Wed Oct 27 2010
Latest operation return code: OK
RTT Values
        Number Of RTT: 999
        RTT Min/Avg/Max: 347/614/867 ms
Latency one-way time milliseconds
        Number of one-way Samples: 0
        Source to Destination one way Min/Avg/Max: 0/0/0 ms
        Destination to Source one way Min/Avg/Max: 0/0/0 ms
Jitter time milliseconds
        Number of SD Jitter Samples: 997
        Number of DS Jitter Samples: 998
        Source to Destination Jitter Min/Avg/Max: 0/6/19 ms
        Destination to Source Jitter Min/Avg/Max: 0/1/3 ms
Packet Loss Values
        Loss Source to Destination: 1           Loss Destination to Source: 0
        Out Of Sequence: 0      Tail Drop: 0    Packet Late Arrival: 0
Voice Score Values
        Calculated Planning Impairment Factor (ICPIF): 20
MOS score: 3.72
Number of successes: 32
Number of failures: 0
Operation time to live: 1668 sec

Multiple photos in one clip

I use still photos to "produce" my iMovies. I am looking for a way or program to have 3, 4, or 6 photos in one clip. Does anyone know of a way to achieve this other that Keynote exported as a QT?

Plan B)
use any paint app to "compose" a few pics into one.... import back to iPhoto or iMovie...
see an example here >> click!!, that "starting" pic is completly "synthetic" - the pics are real, but the frames, table, the shadows... all done with a few clicks in PhotoshopElements....

Multicam Edit - One clip shifted

Hi folks,
I'm editing a multicam concert shoot in miniDV format in FCP 6.0.5.
Although the cameras had timecode, they had different offsets,
and using the multicam offset adjustment (ctl-shift-drag)
produced some really bizarre behavior, so I went back and
set in-points using an audio cue, recreated the multiclip
syncing with the in-points, dragged the multiclip into a timeline,
and then dragged the beginning of the multiclip to the left so
I could get all the footage before the in-points.
The resulting sync was very tight.
Now I have been editing a few minutes of this 50-minute take,
and one clip is getting weird. Every time I cut to it, it appears
in the timeline with a out-of-sync indicator. Every instance is
off by 8 frames. I can resync it (double-click, then ctl-option)
using the "pull in to sync" menu item, but it's still quite strange
that the clip seems to think it's offset in the first place.
Another clip in the multiclip seems to have drifted in sync
as well, although there is no numerical indication.
Has anyone experienced this? There are a lot of edits done
and a lot more to do.
Thanks for your time!
Les

Thanks for your responses.
Kevan, I don't think the problem is timecode breaks because I set FCP
to abort on dropped frames when I captured. It makes sense, however,
that miniDV camcorders can drift.
Michael, I certainly plan on keeping the option open for chopping the
performance into multiple multiclips.
I think the problem is "dragging the beginning of the multiclip to the left."
Perhaps, but what do you do when the only clear moment for syncing
all four cameras happens well into the first song? It's a real pity that all
cameras were not running when the clapperboard was struck!
The strange thing I'm experiencing is that sync seems to drift AFTER
I have the multiclip made, AFTER I've dragged the beginning of the
multiclip to the left. It's as if the act of editing has moved the sync.
It's a sunny morning here in northern California. I'm going to have
another coffee and look at this problem with fresh eyes.
<

HT5622 I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy

I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon. What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family? Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's?

There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
How to use multiple iPods, iPads, or iPhones with one computer

How can I move voiceover track one clip back?

I recorded a long voiceover recording, but it starts one clip forward of where it should be. Is there a way to move the voiceover recording one clip back??
Thanks in advance for your help,
Hal
[email protected]

I just figured it out .... thanks anyway ,
hal

How can i leave audio from one clip playing, while showing another one in i

i am editing a movie, using iMovie 08, and want to use sound for a clip in the video for the end credits. how can i do this?
just to be clear, i am not trying to add audio. i am trying to leave the audio from ONE CLIP playing, while viewing a new frame. thanks.

This is simple in iMovie 11 (drag and drop), but in iMovie 08, you can still do it.
[See this blog post for details|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.htm l]

One Itunes library for Ipod and touch

I have a 5th generation Ipod and plan on upgrading to the Ipod touch. Can I keep my one itunes library for both devices or does each device have to have its own itunes account/library?

You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

One clip delayed for colorimetry / Affichage du plan précédent pour l'étalonnage

Similar Messages

Maybe you are looking for