One Communication Channel for two XML-Structure

Hi to all!
i'm Newbee in XI.
i register one Communication Channel to recieve two different XML-Structure and when i sent second structure there was a Mapping error, because XI waiting for first XML-Structure.
I'd like to ask if there are any additional condition that i must tune up to make it possible or just it's impossible?

Hi,
Please refer below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/121b053d-0401-0010-539f-f9295efb7bad
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a913f71-0601-0010-7a83-dfd3208a9a0b
how to find the URL of deployed Web services?
Creating .NET Web service
http://www.15seconds.com/issue/010430.htm
Also refer SOAP Framework to generate the common wsdl for both the messages with single SOAP CC
http://help.sap.com/saphelp_nw04s/helpdata/en/bb/ddb33d2ae46b3be10000000a114084/frameset.htm
Thanks
swarup

Similar Messages

  • Communication Channels for IDOC scenario

    Hi!
    I have a conceptual question regarding the communication channels within IDoc scenario.
    Case 1:
    - File_to_RFC scenario
    Here I defined a File communication channel from business system A.
    1a) For which system (business system A or B) do I need to define a IDoc communication channel?
    1b) What is the RFC destination and Port I need here?
    Case 2:
    - IDOC_to_IDOC scenario
    2a) Do I need in this scenario only one communication channel for business system A?
    2b) What is the RFC destination and Port I need here?
    Thank you very much!
    Thom

    >
    Thom Heinemann wrote:
    > Hi!
    >
    > I have a conceptual question regarding the communication channels within IDoc scenario.
    >
    > Case 1:
    > - File_to_RFC scenario
    > Here I defined a File communication channel from business system A.
    > 1a) For which system (business system A or B) do I need to define a IDoc communication channel?
    >  1b) What is the RFC destination and Port I need here?
    >
    in this case no IDoc CC is involved. All you need is a File sender adapter and RFC receiver adapter
    > Case 2:
    > - IDOC_to_IDOC scenario
    > 2a) Do I need in this scenario only one communication channel for business system A?
    >  2b) What is the RFC destination and Port I need here?
    >
    >
    > Thank you very much!
    >
    > Thom
    in this case you will need a IDoc receiver adapter only.
    The basic settings:
    In XI
    SM59 - R3 connection pointing to R3
    IDX1 - define the port with the above dest.
    In R3
    SM59 - R3 connection pointing to XI
    WE21 - define the port with the above dest.
    WE20 - Partner profile type outbound/Inbound
    Further ref:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

  • Problem of Creating Multiple Communication channels for multiple files

    Hi Everybody
    I have a very basic doubt but this struck me...
    For a file-XI-file scenario,if multiple files are coming from same FTP server but with different names then we have to create multiple communication channels for all the files of different names..but is this a intelligent approach?Can we do something so that only one communication channel can receive multiple files of different names?plz explain in detail if possible ASAP.
    I have another doubt as in File-XI-File scenario how the XI understands that a particular file is from this FTP server  needs to be send to another particular FTP Server?is it only the name of the file which we give in sender comm channel & receiver comm chaneel which determines this????that means this name should always be same?plz explain in detail if anybody knows?

    Thanks Aamir.I understood the solution.
    Correct me if I am wrong.......
    1)If there are multiple files with different names & different extensions in the sender FTP then we use-->
    2)if there are multiple files with different names & different extensions in sender FTP & I want only say files of 2 extension types(say .xml & .txt)then we use-->
    *.xml
    in one comm channel &
    *.txt
    in another comm channel rite??
    Also I wanted to ask that only two kinda files we can pick up through sender comm channel rite?
    .xml  and .txt(File content Conversion).Can we pick files of other extensions also?(say .doc,.xls)If we use as u said
    then files of all other extensions will also be picked up rite?bt hw will xi convert them into xml?plz explain......
    One of my other q is not answered yet.........all these same doubts are there for receiver communication channel.......but you all have not said nething abt the receiver comm channel........plz explain the answers to all these queries for receiver comm channel for a receiver FTP........ASAP......thanks once again.......

  • Possible to configure several communication channels for the same receiver?

    Hi,
    is it possible to configure several communication channels for one (the same) receiver?
    The problem is as follows: I would like to switch between the RFC-channel and the XI-channel, if the RFC-Adapter doesn't work for some reason.
    The situation: Our XI3.0 posts messages to several receivers and the switch should be done by changing one table entry which is selected and analysed in an ABAP-Proxy and which could enrich the XML-message. By now, the only chance I see is to change the respective entries in the Integration Directory for each receiver separately.
    Thanks for your help, Peter.

    Hi,
    >>>>But to be honest: Is it elegant to double the receivers?
    of course not:)
    but this is the only way I believe
    (cause you cannot assign conditions to receiver agreements)
    you could also create two messages (practically two flows)
    but would it be more elegant?
    BTW
    in my opinion you should try restarting RFC channel
    and not create two - just in case...
    if RFC doesn't always work why don't you use another one only?
    this would just simplify your scenario (maintanance of just a number of communication channels and not 2 x number of communication channels)
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • HT204053 can I use 2 different apple id's and one itunes id for two seperate I-phones?

    can I use 2 different apple id's and one itunes id for two seperate I-phones?

    Welcome to the Apple Community.
    Yes.

  • Configuring a Communication Channel for an AE other than the default IS

    Configuring a Communication Channel for an Adapter Engine other than the default engine.
    See:  help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
    It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
    I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    Maybe some background would be helpful:  This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape.  BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.

    Hi Anesh,
    >>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
    in order to use some other adapter engine you
    have to install it first by dafault only one
    (central) adapter engine is used and it is all
    most clients need
    if you'd like to use some other adapter engine
    (decentralized for example) have a look at thid guide:
    <b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

  • Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?

    Hello All,
    One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
    Is the (IDoc) Communication Channel from Sending system to XI required to configured?
    Many thanks in advanced!
    Jochen

    Hi Jochen,
    for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
    Thanks,
    Rajeev Gupta

  • Party communication channel for multiple stores with multiple user id and passwords in sap pi

    Hi Exeperts,
    I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company   with single user id and password in communication channel.
    but requirement  is changed now  i have 20 stores  with 20 user id and password for communication channel.how can i achieve this requirement?
    Can i create 20 communication channels  for 20 stores  or can handle through the party based communication ?
    Please  help us achieve the requirement.
    Regards
    Ravinder.s

    Hi,
    In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
    1. 2 business components/2 SOAP receiver communication channels.
    2. 1 receiver determination with xPath for username to determine correct business component
    3. 1 interface determination
    4. 2 receiver agreements (one for each cc)
    Hope this helps,
    Mark

  • HT204053 Can I use one Apple ID for two Apple IPhones?

    Can I use one Apple ID for two Apple IPhones? I received an answer of yes.
    Now another question.  I have one ICloud Account, Two IPhones.  Can I use Find my IPhone via the one ICloud Account?  Can I see two IPhones on the map at the same time?  or do I need to view the second phone via some other method.
    Message was edited by: Hunter3D

    Yes.
    Cheers,
    GB

  • One apple id for two iPhone

    Is it possible tou use just one aple id for two iPhones?

    Read here:
    http://support.apple.com/kb/HT1495

  • Can I use one gift card for two apple ID at the same time?

    Can I activate one gift card for two different apple ID and use amount from gift card like bank account?

    No, an iTunes gift card can only be redeemed onto one account, and it can be used to buy content for that account (you can't, for example, redeem it on an account and then use some of it for gifting content to another account).

  • Can I use one iCloud account for two phones without sharing contacts

    Can I use one iCloud account for two phones without sharing contacts

    If so how do I unmerge the two phones?

  • Use one store account for two I pads. Get request for security code

    Trying to use one store account for two I pads. One works fine, the other is unable to download a free app, window asks for security code.?.......
    What security code?

    Probably the security code on your credit card

  • Is it ok to use one apple id for two devices ?

    is it ok to use one apple id for two devices ?

    Here's the deal: The SLA permits the "sharing" of content with up to 5 family members in the same household. Any other distribution of content is considered stealing...the SLA does not give you the right to distribute content in any way, shape or form. Its really that simple, and "friend" is NOT a family member living in the same household.

Maybe you are looking for