One communication channel with 2 cluster node functioning at the same time

Hi Gurus,
We have PI 7.1 installed in a HA environment, which includes  two servers.
server A: ASCSSCSDBERSAAS
server B: ERS + PAS
and we can see a jdbc channel in the communication channel monitoring, and along with the CC there are two cluster ID available,both of which are showing green -- functioning.
now the issue is the process is actually not started because there is no processing details, and  when we stop the CC and then start, nothing happens, but there are still 2 green nights, seems very strange.
does any one have such experience and how can make these two nodes work well?
Thanks.

Probably they use an older version of alsa that doesn't have dmix enabled by default.
Have a read through: http://gentoo-wiki.com/HOWTO_ALSA_Compl … ix%29#dmix
Perhaps it will help.

Similar Messages

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • Collecting data from advantech-usb4704 with two different apps at the same time

    I wonder if I can access to Advantech-4704 with two different applications at the same time?
    I use this block in my vis.
    I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
    Thankyou!

    Dear gtu,
    as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
    One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
    Best Regards,
    Adam Cseh
    Applications/Systems Engineer
    National Instruments

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

    Not having the problem, don't personally know anyone who is.

  • Is it possible to face time with 3 different people at the same time?

    Is it possible to face time with 3 different people at the same time?

    Check out GoToMeeting http://tinyurl.com/k6q84kw
     Cheers, Tom

  • Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

    Hello everyone,
    Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
    Thanks in advance,
    Jean-Baptiste

    jbp- wrote:
    Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
    You're very welcome but Peggy really gave you the answer already. 
    With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps.  The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
    In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen).  It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app.  If you haven't tried it, I suggest you give it a whirl.
    I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures. 

  • Moving apps, their data from one ipad to another AND changing/deleting at the same time!

    Hi,
    I would like to get ready for my new iPad. Over time I have accumalated a LOT of Apps which I don't use or  would like to organize differently.
    Others (games or internal documents/settings) I would like to leave intact. Is there a way to choose what to import and maybe already pre-sort?
    I know of the restore feature from a specific backup (used that in the past) that DOES keep the data intact but does not allow for my organizing/spring cleaning scenario...
    I was thinking directly of the new Apple configurator tool. I could import my iPad profile, and based on that choose apps to keep (and their data) or delete in a first step. Even better would be if I could then group them in folders or screens BEFORE I sync this new profile to my new iPad.
    This would also be ideal to manage backups and different setups for family members when we do the family shuffle.. I upgrade, hand my old device to my better half, she hands her to X family member etc., etc.
    My issue is that the help menu of the configurator toll indicates it works only for volume bought applications. Is this right? Why the restriction?
    Main concern of course is not installing the application on a specific device BUT to copy the app (AND internal data) exactly to another one!
    I'm surprised that Apple hasn't adressed these issues better but maybe they did with this new tool (or another way) and I just don't see/understand it.
    Thanks for any and all input,
    Philly

    Thanks Rudegar
    My problem is a little different. I would like to selectively sync apps and maybe change/add/delete folders and app screens.
    I know how to "clone/restore" the iPad. I was hoping that I could maybe use the Apple confugurator for this purpose and customize my apps based on an import from the old iPad. As such weeding out old apps and not having to use the cumbersome iTunes method but at the same time protecting my backed up data.
    It could also simplify data transfer if I could create multiple profiles/people from which I can choose who to sync/transfer to a specific iDevice.
    But thanks for taking your time and providing a solution to transfer all files from one device to another.
    Philly

  • How can one share iTunes Library across two machines at the same time?

    **I have setup 1 of 2 machines to host all the songs in my iTunes library. I then went to machine 2 of 2 and held down option key on start up of iTUnes, changed the location of the liobrary on machine 2 to a shared folder on machine 1.**
    **This works awesome and I can use itunes on each of the machines 1 and 2 with no duplicate library in my home.**
    **Problem: I can only run one machine at a time. I can not run itunes on both machines at the same time. The error message from machine 2 is ITUNES library is locked and cant write to the folder. iTunes works correct if I QUIT iTunes on machine 1.**
    **Can iTunes run at the same time on 2 machines and access the same library?**
    *Thank You Troy*

    Troy Yoho wrote:
    Can iTunes run at the same time on 2 machines and access the same library?
    in a way, yes.
    set up _*Home Sharing*_ on both machines.
    JGG

  • One computer, but two user-accounts active, at the same time, in 10.6?

    I'm contemplating this setup: A current generation MacPro (running SL), with two monitors. Can I have two separate user-accounts (the Admin account and one additional user-account) active and running simultaneously from the MacPro, but, of course, displayed separately to the monitor corresponding with that user-account?
    Thank you!

    you can have two accounts logged in at the same time via fast user switching but there is no way to display them at the same time on different monitors.

  • Using AExpress with mac and PC at the same time?!

    I spent all day with this issue, not resolved some...but
    I am getting a blinking amber light after reseting my airport express, but yet it is the only way it connects my mac and my pc together on the device at the same time, without shutting one out,
    How can I get them to share the base station and have the normal green light? if they have a green light it disconnects my pc wirless connection. Are there shared settings somewhere?
    windows xp pro sp3
    wireless usb card: belkin F5D9050
    mac macbook 10.5 osx
    airport card/utility
    airport express downloaded 5.4.3 version for windows

    Thanks Tesserax
    well, after 12 hours and trials I solved it myself, but I am considering more people have this issue, so I will share.
    (make sure any adapter you buy is 802.11g/n/b compatible)
    I had a Belkin F5D9050 USB card,
    so install the latest updated driver for it, not the one with the cd!!!
    found here: http://www.belkin.com/ca/support/article/?lid=enc&pid=F5D9050&aid=13773&scid=223
    depending on your OS, pick one...but install driver first, then connect the usb card.
    Then install the latest Airport Utility (*NOTE: there are alot of old ones that do not work out there!) Only use this one!
    Airport Utility: 5.4.2 June 2009
    http://support.apple.com/downloads/AirPortUtility_5_4_2Windows
    If the AE utility doesn't detect your base station, press the reset button (until amber light flashes quickly), and then try re-scan again! do this until it shows up, then the installer will begin, if the amber light keeps blinking you need to reset again, once it works the lights will alternate between green and amber, then stay green.
    IF YOU HAVE A MAC HOOKED UP: uninstall your airport base station from the unit for now, you can install it later after you configure your pc! The PC is sensitive and will not share the network, but mac will after.
    Once the green light stays on you will be connected to wireless internet. Now you can connect your mac again.
    I stumbled through this setup through trial and error, so do not quote me, but it worked for me.
    If you have a password for it, write it down, you will need to enter it to connect to your base station again. This is the best way to stay online, and not have others stealing your wireless, or files.
    You can share files to your PC and vise versa, just be sure to read up on sharing in Mac Osx.
    If all goes well, now your PC and mac can be on the same base station at the same time.
    If it works with amber light flashing it does, but is NOT connected right.
    The light should be solid green.
    TRUST ME, NO ONE HAS GOOD TIPS OUT THERE, AND CHAT SUPPORT DOES NOTHING!
    I am sure I am forgetting something, but if you have an issue...just message me.
    Message was edited by: Laurencia7

  • How does one use Sound sticks while using HDMI at the same time ??

    How does one use Soundsticks while using HDMI at the same time ??

    Hi Caleb,
    This isn't a precise answer but a possible workable solution. SoundSource puts a menu extra which allows you to switch input/output and has an option for Auto-Switch to Headphones. The auto-switch feature doesn't work with USB headphones but I believe it will with 'regular' headphone plugs such as you use.
    http://www.rogueamoeba.com/freebies/
    (Oh, did I mention it's free Universal and works with Leopard?)

  • Help with recording 2 tracks at the same time

    Basically I recently purchased an Audio Interface (BEHRINGER XENYX Q802 USB) and I'm having trouble recording multiple tracks at the same time while using it.
    When I set up 2 MONO tracks in my DAW (one using input 1, the other using input 2) all that happens is that I get a recording of one mic over both tracks in my DAW.
    This is probably a beginner post and I have looked it up on YouTube etc. but it just doesn't work for me... Maybe it has something to do with my Interface, but any help will be much appreciated.

    Hi Pancenter,
    Unfortunately I don't have the manual as I purchased it from a friend who failed to provide me with the Manual.
    But thank you for answering as this was what I needed to do.
    Many thanks
    Olie.

  • Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

    I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
    My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
    For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
    Help me.

    Hello Sam R.,
    The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
    I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
    Basically, yes. the command button inside the control should updates both label and textbox.
    If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert. 
    I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and     

  • Error -50103 when I am trying to access two channels on USB 6366 board in the same time

    I am trying to use two DAQmx tasks attempting to access two channels from
    USB-6366 in the same time. But it gives me an error Error -50103. So I looked
    online and find out it says ' It is not possible to have multiple DAQmx tasks
    attempting to access the same physical device. '. So I am wandering how can
    collect data from my ai0 and ai1 channels in the same time? Here is my code,
    and please help me out. Thanks very much
    Attachments:
    error_-501013.vi ‏27 KB

    Simple - use a single task with multiple channels. Surely the answers in all of the related posts said that. The channel list is just dev1/ai0:1.

Maybe you are looking for

  • Can't get to third screen to be able to set the song to repeat

    i'm trying to repeat a song on my 6th generation ipod nano - but can't get to the third screen to get to the option to set it.  does anyone know how to get the third screen to be available?

  • Is it safe to charge iphone with HTC charger?

    I'm in travel now and I haven't access to my charger. is it safe to charge my iphone with HTC or sonyErricson charger. the cable connector is with me.

  • Floated DIV alignment woes

    I have created 9 left-floated DIV 3 a row with the last div of the first row taller than the first two, how can i make the first two div of the second row occupy the space on top of them instead of aligning to the bottom of the 3rd div in the first r

  • Time Capsule FTP access

    I just bought and setup a 1TB Time Capsule that is working perfectly in my house. I am trying to find out how I can access the drive on the TC from a windows machine on the internet. I've setup file sharing and can see the drive from my MBPro using c

  • Quicktime not playing avi

    hi i'm using Lion (the latest version as downloaded in February 2012) and QUicktime doesnt play any .avi files. ever since i got my mac book pro a few weeks its never actually played avi files. any help??