One Consolidated MM Inventory report for all inventories

Hello Experts,
I have a requirement to develop an MM inventory report which should include all the below inventories for a given period. basically I have to display the Quantity, Unit price and Value for all these.
1. Stock Beginning value (Similar to MB5B)
2. Stock period end value (Similar to MB5B)
3. Stock in (MSEG-BWART = 101 and 102 )
4. Total available goods
5. Stock out to project ( MSEG-BWART = 261, 921, 961 )
6. Stock out to Cost center ( MSEG-BWART = 201)
7. Stock difference (MSEG-BWART = 701 and 702)
8. Scraping (MSEG-BWART = 501)
I heard that there are separate transactions for each points above. But Is there any consolidated (Standard or Z)report which includes all the above said information.
Thanks in advance,
Balaji

Hi,
Pl. explore this report S_P00_07000139, hope it will help you, else you need to develop a Z Report
Regards,
Vikas
Edited by: Vikas Mayekar on Jul 27, 2009 10:57 AM

Similar Messages

Inventory report for Previous Periods

Hi Experts ,
I would like to have an inventory report for all materials in a Particular Plant for the Periods Sep 2009 and Sep 2010 . Could you please help me in providing the reports for the same .
Thanks
Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
The discussions are not a replacement for proper training
Thread locked
Message was edited by: Jürgen L

You can well run these reports on background..
Go to SE38 Enter the program name "J_1HSTCD"
Then press Execute / F8.
Enter you selection date as 01.09.2009 to 31.09.2010 and enter the plant and leave the all selection as per SAP standard..
Then press F9 or Go to Program

Inventory report for valuation type

Hi experts,
Is there any SAP standard reports can show the inventory value based on the valuation type?
we have actived the split valuation, so one material may have several valuation types. Different valuation types have different MAP and amounts. Now we want to find the inventory value for each valuation type, for the whole inventory.
tcode such as MB51 only can display every movement details, we want to find a report for all materials.
Thanks.

Hi
Pls try MB5L
Regards
Sanil Bhandari

Physical inventory document - for all A parts

Hi,
We are in the process of preparing our system for physical inventory count for all A parts (Cycle count indicator is A).
1. We ran MI24 to get all open physical inventory documents.(they are around 100).
2.Then we ran MI31 (didn't create batch input) for all A parts and the following are checked - 1. Material marked for deletion 2. only materials w/o zero stock 3. Unrestrcited use 4. Blocked 4. Include inventoried materials 5. Included inventoried batches. The variant for MI31 includes all A parts in the material selection and the required plant and SL are input. The output said, phy inventory documents could be created for 656 materials.
3. I wrote a query with MARC and MARD to get all A parts with unrestricted quantity > 0 for the above specified plant and SL. The list produced 882.
The above two counts are not matching.
I ran MI31 for some of the materials which are in the list materials as per point 3 but not in the above 2. But MI31 said, no physical inventory document can be created.
We want to make sure both the both numbers are equal (step 1 + 2 = step 3), to make sure all A parts will be counted. Can anyone explain why they are not matching? or Am I missing something?
OR any other ways to make sure all A parts will be counted. Thanks,
Regards,
Sundar.

Please refer my comment. It may be useful for you.
There are two ways if you want to carry out Physical Inventory count
1)Manual -
First check if there are no open PI document for a material using MI31.
Then carry out three transactions one after another MI01, MI04, MI07
2) Automatic
Maintain CC physical inv. indicator in material master i.e A, B, C
Before that ensure that you have maintained SPRO setting for A, B and C.
Ok Now check the planned count date in MARC table. Run a Z program to change the last count date
Now run MICN and schedule a job to create PI documents

Can Cisco Mars do the reporting for all devices (checkpint, ISS etc)

Is this is true that cisco mars can do the reporting for all the devices(like checkpoint, juniper, sonicwall, and IBM-ISS ) devices.
Requesting plz reply ASAP

no, it's not true. the following MARS lists what mars has direct support for:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/4.3/compatibility/local_controller/dtlc43x.html
Anything else would require creating a custom parser, which is great functionality to have in a pinch but is a major pita to maintain. That's one of the biggest reasons to buy a SIM in the first place, so you don't have to manage parsing yourself.

Projected Stock-Inventory Report for APO

Hi All,
I have to develop Projected Stock-Inventory Report for APO.
I need to fetch data from APO and need to store it in BI for reporting purpose.
Do you have any idea about how to get the required data from APO system?
Where does stock data resides along with projected stock in any SNP aggregate or any table?
Regards,
Krunalkumar Rathod

Hello,
I suppose you mean you want to export the data "stock on hand" in SNP planning book to BW.
This key figure is an auxiliary key figure that calculated by macro. The data is only diplayed in the planning book but not saved to any database table or liveCache.
In order to save it, you can add your own time-series key figure to save the stock on hand. And you'll need to create your own macro to calculate or copy from the auxiliary key figure.
A good way is you can create a macro by copying the "stock balance" macro and just change the stock on hand key figure to your own time serires key figure. Then when you need the data, you can run the macro in background job. By doing this, the stock data will be saved to the time series key figure. Then you can extract it from liveCache as normal key figures.
Please notice the time-series key figure must be assigned to correct aggregates in an SNP planning area.
Best Regards,
Ada

Inventory Report For Special Stock (Project Stock)

Dear Sir,
We are in Make -To - Order scenario and procure the material against the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
31/Jan/2007 .
b) We are not able to get the Inventory Report , Material Group wise
I request to kindly guide me , as how to take the Inventory Report for Project Stock .
Regards
B Mittal

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Sales document report for all open documents

hi i need the code for sales document report for all open documents is sd
... can anyone help me out.
thanks in advance

Try transaction VA05. In that choose "Open Orders" along with other selection criteria.
If you want the Open sales order qty in output and its not displayed, do the following.
Sales -> System modification -> create new fields ( without condition technique) -> New fields for lists.
You can change V05TZZMO and structure VBMTVZ from there or use SE38 / SE11.
For both you'll need an object registration in OSS.
Hope this helps.
Thanks,
Balaji

Inventory report for stock category B

Hi everyone,
We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

Need to run the report for All Values when Null is passed in parameter

Hi All,
In my BIP report, I am using a parameter :asset with Type as Text, which means user will type the values for the parameter in the text box.
Now, this parameter can take multiple comma separated values. I have a requirement to run the report for All Values when user doesn't enter any value in the parameter text box and if user enters any value(s) then the report will run for those values . The way, I tried to handle that in the query using couple of ways was :
IMP : My Database is SQL Server
where
(table.asset = isnull((:asset), table.asset) or table.asset in (:asset))
Now this works fine when I give a single asset number but when I give multiple values separated by comma like 123, 345 in the text box, then the statement fails saying 'encountered ,'
I also tried simply
table.asset in isnull((:asset),table.asset) -- but this doesn't work as it doesn't allow me to use in operater while using isnull and if i will use = operater then it won't work in case of multiple values
Any suggestions on how can I handle this? Any help would be highly appreciated.
Thanks,
Ronny

thanks for replying, but i tried this option too, it did not work for me, neither isnull nor coalesce. I mean, the solution work for single value but when i pass multiple values then separated by a comma then it doesn't work and shows me an error like "Incorrect Syntax ','". I am using SQL server as DB and bip is 10.1.3.4.1
also please share the SR number, so i can also check the same.
can there be any other work around to this?
thanks,
ronny

Allow only one set of parameter values for all worksheets

I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
Any thoughts...
Thanks,
Jamie

Hi Jamie
Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
Which version of Discoverer are you using?
Best wishes
Michael

Pull out Report for all configured Collection veriables in SCCM 20007

Hi All,
I have tried many ways but failed to pull out a report on collection veraiables.
It would be great, if someone could suggest how to pull out a report for all collection veriables which are configured.
Thanks
Regards, Dan

Hi,
Check if this link helps :
http://it.peikkoluola.net/2013/09/30/display-a-sccm-collection-variable-and-its-value/
~ Räjeésh M | Blog:
ScorpITs | Please remember to 'Mark as Answer' or 'Vote as Helpful' on the post that helps. It helps others reading the thread and recognizes useful contributions.

Running-report-for-all-values

Hi ,
Based on this link i have implemented this logic....
http://bischool.wordpress.com/2009/08/26/avoid-running-report-for-all-values-on-dashboard-when-using-multi-select-prompt/
But for the intermediate report its taking more time to run...nearly 4min...is there any way to reduce it.
Thanks

hi User,
Quick question
Why you are giving (-1) value's as per the doc we can give any value which has to give no results? Have u tried to give some other value ?
Next,Do u have left outer joins between those tables? If yes you should face the same problem with the main report because the filters to be same as intermediate report am i right ?
First tune-up the rpd and get the main report query ,run-it over DB
Due to huge data and the join taking more time....is there way any thing to add to reduce the time??Huge data ?? Intermediate report will not get any results i think it will not take more time to give a message,but due to join conditions only it is taking long time to run
Note :Before getting value from DB it will check the where condition( joins)
Thanks,
Saichand Varanasi

Is it possible to query software inventory report for Oracle SQL developer installation?

Hi all
My company requires to generate a report of all kinds of Oracle database access tool. I can find Toad installation from Add/Remove Program and therefore can query for Toad.
However, Oracle SQL developer is using Java. I cannot see an entry for Oracle SQL developer from Add/Remove Program. Is there a way to query inventory for Oracle SQL developer installation?
Thanks a lot.
Regards
Lic

You might be able to use software inventory to report on the version of sqldeveloper.exe.
As the app looks like just a zip you extract to a custom location that might be one method.

INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

One Consolidated MM Inventory report for all inventories

Similar Messages

Maybe you are looking for