One customer entry is not comming into datasource.

Hi,
I did not get one of customer Line item details in Datasource. But i can see the data  in FB03. what will be the reason.
Regards.

Hi,
yes, i have not seen in datasource. i have checked with Customer and Fiscal period. but i did not get the perticular customer line item details. But i have seen in FB03. what will be the problem.
Please give me suggestions.
Regards.

Similar Messages

  • When i try to search for contact or create a new one the keybord does not come up

    when i try to search for contact or create a new one the keybord does not come up

    Try going to settings to General to reset to 'reset all settings'
    This should do the trick!
    Good luck

  • When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

    When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

    Does it show up in your camera roll?

  • I have a iphone 4s and i can't get the charger to come out of the phone its stuck on one side and will not come out

    I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?

    You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.

  • When i try to email photos the collage tempalte does not come into email

    when i try to email photos the collage template does not come into the email

    In the iPhoto preferences accounts tab delete the account that is not working and re-enter it
    Or better yet IMHO set apple mail as your email client
    LN

  • Thumbnails will not come into focus

    Hello,
    I am using PSE 8 and when I am in the organizer and double click on a photo to make larger it will not come into focus.  Is it damaged or can it be fixed?

    Try rebuilding the thumbnail cache:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Recreate_Organizer_thumbna ils

  • My firefox custom page does not come up when i click the firefox icon w/mac

    For the last 3 days when I click the firefox icon on my mac i get the plain igoogle page. My custom page does not automatically come up as befoe. Then I have to reset the i google password everytime then get to my page

    Ok, lets do a couple of steps here first:
    To make sure your windows isn't corrupted because of the power outage, let's run chkdsk.
    Click on My Computer, then right click your C: Drive (if you have other hard drives, you will want to run this on them as well). Then, click Properties. Inside that window, go to the Tools tab. Inside that tab, open up the "Check Now" button. That will open a smaller window. Select the checkbox to "Automatically fix file system errors", then hit Start. You will probably receive an error asking if you want to schedule the disk check, click Yes, then restart your computer.
    Read [http://support.microsoft.com/kb/315265 http://support.microsoft.com/kb/315265] for more information.
    After running the chkdsk, then please go to [http://www.getfirefox.com www.getfirefox.com], and download a fresh version of Firefox. I'm assuming you are using Internet Explorer to download Firefox. Instead of hitting Run, let's try hitting save. Remember where it saves the installer file on your computer.
    After the download has finished, double-click and run the Firefox install. Once it is finished, try to start Firefox up. Let me know how it goes!

  • Why does my infrared custom white balance not load into Lightroom or CameraRaw?

    The preview shows the correct WB, but the full render removes WB and any monochromatic color profiles.
    Correct WB that I want. As seen from back of camera
    Once the full preview loads. DO NOT WANT.
    White balance is at 2000, the coolest it can go. I cannot recreate the custom WB that is in camera. I can make all of the B&W, but I want the custom WB so I can do a proper channel mix in PS.
    Thank you for any help.

    You can use the DNG Profile Editor to add a negative bias to the WB settings in an existing camera profile and save it as a new profile (for IR) so you can adjust the effective WB lower than 2000K:
    http://stevencastle.wordpress.com/2010/07/17/processing-infrared-shots-in-adobe-camera-raw /
    It still won’t pick up what the camera did, but you can adjust things lower, at least.
    If this one page doesn’t make sense Google for (DNG Profile Editor IR white balance)

  • One camera of three not syncing into color from FCP

    Running lastest version of everything on imac 2 ghz intel core 2 duo 2 gb memory. Useing multi-sync to edit three camera shoot shot on vx 200 with p2 cards. Edit is great. One camera goes out of sync by a lot when importing to color.
    tried export each clip from this camera and reimporting qt back into sequence. This worked expect, the clip got squished going into color.. didn't stay at HD settings, probably a pixel issue. Tried reexport using pro-res 422 HD 960x720 24p which was our camera setting.
    This works but sometimes but not all the time. I get a render error "can't find capture card".
    The camera that goes out of sync is in two parts, thus the multi-clips had to be
    resynced... this shouldn't be an issue with xml as it's reading the time code unless the timecode is the same on both clips...hmmm...

    From the Release Notes:
    "Known Issues Affect Sequences Containing Multiclips That Are Sent to Color
    Sequences that contain multiclips have known issues that affect Final Cut Pro to Color round trips."
    Color does not like multiclips. Too bad the forum search function is disabled as solutions have been offered up, I just can't remember them currently as I rarely touch the FCP multiclip function.

  • Billing Block in Customer Master does not default into Sales Order (VA01)

    I put a billing block into the customer master but it is not defaulting the billing block when I create a new sales order for that customer.  Do you have any tips please for what could be wrong?

    Hi,
    The billing block you set in customer master or by XD05 is not meant for to flow in sales order(flow to va01).
    That is meant for block customer for sales/delivery/billing
    If you want this block default in va01 then you can set it for document type by VOV8
    Kapil

  • Open orders sud not come into effect..

    whenever 'm running MRP, system is showing all open orders (sales orders, STO's, Purchase orders)since from 2002 & 2003, & taking into account in MRP run also.
    but my requirement is that it sud only take into account the open orders which are april'07 onwords not before than that.
    how to do..

    No this is not possible to control..only option is we have to close all the orders which have been completed logically like the sales  order,STO,Purchase order etc..
    since they have not been completely closed due to business reasons..System will not be able to identify ..for SAP it is also treated as open orders..
    so we have to take care periodically ensuring that all the unwanted demand has to be properly closed...
    reg
    DsK

  • Journal Entry Remarks not comming

    Hello Everyone,
    I am trying to create Journal Entry using  DI API .The problem i am facing is that  the remarks at the row level is not coming in certain cases.
    Code:-
    /*this is to add remarks at header level*/
                           _journalEntries.ReferenceDate = Convert.ToDateTime(_dataRowHeader["EntryDate"]);
                               _journalEntries.Memo = Convert.ToString(_dataRowHeader["Description"]);
    /**This is to add remarks at row level/
                                    _journalEntries.Lines.PaymentBlock = SAPbobsCOM.BoYesNoEnum.tNO;
                                   _journalEntries.Lines.Credit = Convert.ToDouble(row["CreditAmount"]);
                                   _journalEntries.Lines.Debit = Convert.ToDouble(row["DebitAmount"]);
                                   _journalEntries.Lines.CostingCode = Convert.ToString(row["CostCenterCode"]);
                                   _journalEntries.Lines.LineMemo = Convert.ToString(row["Remark"]);
                                   _journalEntries.Lines.Add();
    By default  in SAP B1 the remarks at the header level gets filled at the row level..so is this issue because of this reason.is there any way i can prevent the remarks at header level to be filled at row level..??
    Thanks and Regards,
    Anuj Kumra

    Hi Anuj,
    With this code I got the remarks on the line. Even when setting Memo to null.
    var je = oCompany.GetBusinessObject(BoObjectTypes.oJournalEntries) as JournalEntries;
    je.Memo = null;
    je.Lines.AccountCode = "100000";
    je.Lines.Credit = 0;
    je.Lines.Debit = 150;
    je.Lines.LineMemo = "some string";
    je.Lines.TaxDate = DateTime.Now;
    je.Lines.Add();
    je.Lines.SetCurrentLine(1);
    je.Lines.AccountCode = "101000";
    je.Lines.Credit = 150;
    je.Lines.Debit = 0;
    je.Lines.LineMemo = "some string";
    je.Lines.TaxDate = DateTime.Now;
    if(je.Add()!=0)
      throw new Exception(oCompany.GetLastErrorDescription());
    So I guess in your case it might be that the row["Remark"] has no data in it.
    Best regards,
    Pedro Magueija

  • Function exit ..not comes into effect.

    Hi,
    i made changes in one function exit which is called in me21.
    i activated n placed break point.
    still it's not going in to that ...
    what wud be the problem..
    Help me.

    ravi,
    As i am new to this txn...plz guid
    i created project...
    in Enhancement assignments what can i give?
    i want fucntion exit..exit_XXX to be activated..
    where can i do this?
    Message was edited by: raja gurrala

  • Having GP point to customer iViews and not "com.sap.pct"  default iViews

    We are tailoring the SAP-delivered ESS Life and Work Events Guided procedures, and have now successfully built a couple of them.  However, when we execute these procedures, they point to the SAP-delivered ESS iViews, and not to the copies we have made
    e.g. pcd:portal_content/com.sap.pct/every_user/.............../com.sap.pct.erp.ess.employmentverif   INSTEAD OF
    pcd:portal_content/com.COMPANYNAME//com.sap.pct.erp.ess.employmentverif
    I have searched high and low throughout the available documentation, and have not seen how I can point to our customied iViews.
    Any insight will be gratefully acknowledged.
    Sincerely
    Rob

    Problem solved.
    I was defining the actual webdynpro as the callable object.  What I should have done was invoke a Portal Iview, NOT the dynpro.  In doing that, I brought up the personalized iview, and everything worked like a charm.

  • Message Not comming into SXMB_MONI

    Hi Friends,
    I am doing File - idoc Scenario.
    My Sender File adatper is picking source file successfully.
    But, when i see in the SXMB_MONI, message is not showing in to the   SXMB_MONI.
    when check my Communication Chennel in RWB, its showing Warning like below
    "Message Found Empty".
      Please anyone tell me what is the problem.
       Regards,
       Vijaya

    Hi Vijaya
    Please look this link.
    /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    https://www.sdn.sap.com/irj/sdn/weblogs?
    blog=/pub/wlg/1629.
    hope this will help u ....

Maybe you are looking for