One Datasource to load Attributes and Text

I have a single custom datasource from an external database. The datasource has 3 fields: the key, a text description, and a Y/N flag. My goal is to load attributes (the Y/N flag) AND text (the description) from this single datasource.
Is this possible?

Hi Jonathan,
Check this "how-to" doc:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412
Also Check these links:
Re: Flexible Update Vs Direct Update?
Flexible update of Master data
Re: Flexible update Vs direct update.
Bye
Dinesh

Similar Messages

Using one datasource for attributes and text?

I am currently loading master data from a flat file using a data source. The flat file contains master data attributes as well as master data text. Is there a disadvantage of using just one datasource (for attributes) to load attributes AND text or is it better to create two data sources, one for attributes and one specifically for text?
So far, the one datasource only approach seems to work, but I am trying to understand the impact if I use an attribute data source to load text. Will this cause any problems or hurt performance?
Thank you,
Dennis

Hi Dennis,
it depends on your requirements... I've never came across any problems loading hierarchy, text and attribute master data with a single data source. If one source file is containing all information this should be the fastest way to load master data, using several data sources means processing one input file several times.
I would prefer modeling different data sources for master data because it is easier to adapt your solution if input format changes. Also system is easier to understand (e.g. process chains) / handle if several persons are involved... but from a technical view there should be no disadvantages.
Best regards,
Björn

Error while loading Masterdat attributes and text in sap BI 7.0

Hi Guys
Any one help me....Plz
I am new to sap BI, in this my first task and it is loading master data attributes and text into datatargets,I did it in SAP BW 3.5,
It is ok
But i got error in BI 7.0
The error is while loading master data attributes and text in master data targest(using insert charcterstic as a infoprovider)every thing is OK up to infopackage creation step,
Andthe data loaded properly into PSA,
But not into Data targets(i mean here data is not load into datatargets)
After i create infopackage
I created DTP wit settings
Extraction Mode:full
Error handlig: Valid records update,no Reporting(request red)
and i click on activate and on Execute push button
error occurred when i click on "Adminstrative data targets " icon
And the error shows in DTP REQUEST 108 Screen
and it is
**RedColour: updating attributes for infoobject smid_ml1:8->0 Data Records**
**Redcolour: end of master data update**
**Redcolour Message for datarecords saved request is red acc to configuration**
Plese guys let me know this error and give your view
Regards
Venkat
SAP BI consultant

@murali
I click on errorstack push button in DTP error screen But it is not but psa error stack right?
I c'nt get u could plese clear it?
And i also tried on error handling :valid records ...green But no use same error occur
But here i am not using cube to reactive again i send it to you mail my problem as screen shot
Thank u 2 all for ur replies but my problekm is not solved yer

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

How are attributes and texts for a master data linked and targeted to ...?

Our previous consultants used to load data to master data 0MATL_GROUP.
1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
Check these above two and find the records loaded are both 1,216 for Language EN.
We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR. However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 2: Through InfoSource 0MATERIAL_ATTR. However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR. InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
2. InfoObj. 0MATL_GROUP
1). Master data tab (/BI0/PMATL_GROUP): 526
2). Text table (/BI0/TMATL_GROUP):
1657 (includes both EN and other lan-guages), for EN: 1190.
3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
Our questions are:
1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
both have counts of 1,216 for Language EN. And for the four branches in the data flow, only 3rd and 4th branches feed data to it. 3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data. Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526? it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
We would be appreciated any expert input!

Kevin,
can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
Analyze the data from step by step from r/3 to BW for each level. You will get clue.
Nagesh.
Message was edited by: Nagesh Ganisetti

Open Hub with Attributes and Texts

Hi,
I´d like to know if it´s possible to have one open hub (database table) with texts and attributes.
There´s no problem when I create it or it´s transformations and DTP´s, but when I try to load texts, after attributes load, it always generates a dump: SAPSQL_ARRAY_INSERT_DUPREC.
I´d like to know a way without using a DSO, any suggestions?!
Kind Regards,
Tomas

Hi,
Pls chk SAP notes system, check SAP note 668466 for some help for this error.
*As according to SAP NOTE ;668466*
Summary
Symptom
You load master data attributes or texts for a characteristic. The loading terminates with runtime errors of the type SAPSQL_ARRAY_INSERT_DUPREC or with error message RSDMD 199. The termination point is in the DBFIRE method of the CL_RSDMD_UPDATE_MASTER_DATA class.
Other terms
Loading master data, attributes, texts, SAPSQL_ARRAY_INSERT_DUPREC, CL_RSDMD_UPDATE_MASTER_DATA, DBFIRE
Reason and Prerequisites
When you load attributes or texts, data records are usually inserted in the master data tables of the characteristic using an array insert statement (P, Q, X, Y, T tables). This results in a SAPSQL_ARRAY_INSERT_DUPREC runtime error if data records that are to be inserted and that relate to the unique primary key of the relevant database table already exist in this table. The following possible reasons are currently known for the occurrence of the SAPSQL_ARRAY_INSERT_DUPREC runtime error:
1. Data inconsistencies in the master data tables of the characteristic
SAPSQL_ARRAY_INSERT_DUPREC runtime errors or RSDMD 199 may occur if the data appears in an inconsistent status in the master data tables of the characteristic before you load attributes or texts. Notes 323140, 566044, 592757 and 599269 describe this (among other things) in more detail.
2. Parallel loading of nondisjunct data packages
If master data attributes are loaded over several dialog processes that are running in parallel, you must guarantee that the data packages of the relevant request are strictly disjunct concerning the characteristic value. This means that all data records that belong to a certain characteristic value may only be contained in a single data package. If data records of a certain characteristic value are distributed over several data packages, this may cause conflicts during the parallel loading of these packages when the master data tables are accessed and this may result in SAPSQL_ARRAY_INSERT_DUPREC runtime errors.
The same conditions that apply to loading attributes also apply to loading language-independent master data texts. If language-dependent texts are loaded in parallel, the data packages must be disjunct in relation to the combination of characteristic value and language indicator.
Note 566044 also describes the problematic nature of nondisjunct data packages or duplicate or overlapping data records.
3. Parallel loading of time-dependent attributes or texts
When you load time-dependent attributes or texts, a data record that is to be loaded is assigned to a characteristic value and also specifically to a time interval within which the contained attribute values or texts are valid. For this reason, requests for loading time-dependent attributes or texts typically contain several data records for each characteristic value. If data records of a certain characteristic value or the combination of characteristic value and language indicator are distributed over several data packages, this may (as already explained) cause conflicts when the master data tables are accessed and may result in SAPSQL_ARRAY_INSERT_DUPREC runtime errors or error message RSDMD 199.
4. Delta update of an ODS object in a characteristic
If you use a delta update from an ODS object to load master data attributes or texts, the activation of the ODS object determines the contents of the data packages that are used for loading the attributes or texts. If all of the ODS loading requests that are used as the data basis for the update into the characteristic are activated together in one step, this guarantees that the system sets up the data packages strictly disjunct in relation to the key fields of the ODS object. If the key fields of the ODS object are displayed one for one on the compounded characteristic value in the update rules, the data may be updated to the characteristic in parallel and by package.
However, if ODS loading requests that were activated at different times appear in the data basis for the update, data records of a certain ODS key or characteristic value may be distributed over several data packages. As already explained, this may cause conflicts when you access master data tables of the characteristic, and it may result in SAPSQL_ARRAY_INSERT_DUPREC runtime errors or error message RSDMD 199.
This problem is also described in Note 666213.
5. Simultaneous loading of attributes and transaction data
If, when loading attributes of a characteristic, you discover that there are still no entries in the master data tables (P, Q) for a specific characteristic value, the system prepares to insert corresponding data records into these database tables. You can load transaction data into an InfoCube or an ODS object, for example, with the option to create missing master data entries for characteristics that involved during the loading. If a request now creates entries for transaction data in the master data tables (P, Q) of the characteristic before the process has inserted corresponding data records into the master data tables (P, Q) for loading attributes for this characteristic, this may result in a SAPSQL_ARRAY_INSERT_DUPREC runtime error or error message RSDMD 199.
This problem may also occur if you load attributes simultaneously for a characteristic that contains the other characteristic as a navigation attribute or compounding part. If a characteristic is compounded to other characteristics or if it contains characteristics other than the navigation attributes, the system also creates SID values for these dependent characteristics when the attributes are loaded depending on the settings in the InfoPackage.
Solution
To repair a possible inconsistency in the data, implement the RSRV test for master data.
To avoid SAPSQL_ARRAY_INSERT_DUPREC runtime errors or error message RSDMD 199 when you load master data, carry out the following actions. The actions to be performed in each case depend on which of the above-mentioned reasons is responsible for the runtime error:
1. Data inconsistencies in the master data tables of the characteristic
If data inconsistencies are responsible for the runtime error, you can usually use the tests in transaction RSRV or the RSDMD_CHECKPRG_ALL program to solve this problem. Notes 323140, 566044, 592757 and 599269 describe these (among other things) in more detail. If you cannot implement an automatic correction in this way, you may have to use an ABAP program that is adjusted to the relevant situation to restore the data consistency.
2. Parallel loading of nondisjunct data packages
If the runtime error does not lead back to the parallel loading of nondisjunct data packages, you must identify the duplicate data records that cause the problem. As described in Note 566044, you can change the insertion into master data tables from one array insert to an individual insert statement. If you use a single record insert statement to insert data records, duplicate data records are logged in the monitor by error messages (RSDMD 196). If the data records of a failed request are still available in the PSA, you can also search for duplicate data records directly in the relevant PSA table.
You may also create duplicate data records if key values are changed in the transmission rules or update rules. If relevant rules are defined, you should check these to see if they can possibly create duplicate data records. If this is the case, you must correct the rules accordingly.
3. Parallel loading of time-dependent attributes or texts
The extractors used for loading time-dependent attributes or texts cannot guarantee that all data records assigned to a certain key value are contained together in only one data package. For this reason, to avoid SAPSQL_ARRAY_INSERT_DUPREC runtime errors or error message RSDMD 199, you should not load time-dependent attributes and texts in parallel. Data packages are processed serially if the 'PSA only' and 'Update Subsequently in Data Targets' settings under 'Processing' are used in the InfoPackage.
4. Delta update of an ODS object in a characteristic
To avoid SAPSQL_ARRAY_INSERT_DUPREC runtime errors or error message RSDMD 199 during the delta update from an ODS object to a characteristic, you must ensure that the data basis used for the update to the characteristic consists exclusively of ODS loading requests that were activated together in one step only. Note 666213 describes in detail how you can ensure this.
5. Simultaneous loading of attributes and transaction data
If the runtime error occurs because another load task creates SID values or master data for the same characteristic at the same time when attributes are loaded, you can only solve the problem by rescheduling. The load task in question must be scheduled in such a way that you can exclude simultaneous processing.
*pls assign points,if info is useful*
Regards
CSM reddy

Is there a way for a form user to load graphics and text in same field?

I am aware that you can load text into a text field and graphics into an image field. However, I would like to load a document containing text and graphics (e.g., MS Word or RTF) into a single field on a PDF form. Is there any way to do this?

Paul,
I believe that the example of attaching a file that you have provided will solve the problem. I am using LiveCycle Designer, so using the code that is in your example should be no problem. The end-user will use Adobe Reader, so as you mentioned, I will use Acrobat to extend the features so that the form can be used by Reader.
Thanks so much for your help,
Daniel
From: pguerett <[email protected]>
To: Daniel Beinart <[email protected]>
Sent: Monday, April 25, 2011 3:03 PM
Subject: Re: Is there a way for a form user to load graphics and text in same field?
It is part of the PDF AcroForm side of things .....Are you using Reader or Acrobat to fill the form. If Reader then you will have to Reader Extend to make this work ....if Acrobat then you simply need to add some code. I have attached a sample that shows you how to do it if you want it.
Paul

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Delete attributes and text of particular hierarchy

Hi All,
I'd like to know if it is possible to delete attributes and texts of a particular hierarchy in an infoobject (with hierarchy), e.g. product hierarchy?
I do not want to delete it manually?
Could this be done using process chain?
-WJ-

HI ,
GO to se80 -> select function Group -> give RSHI and press enter . In the section below it shows all the function MOdules belonging to this Function Group . In this there are function Modules related to Hierarchy Maintenance . SO i think this Function Modules will help u .
IF u find any function Module , then u can create a custom program and call the function MOdule in it . THen u can include the program in the Process Chain .
Assign points if it helps....
Regards,
VIjay

How can i solve "could not load language and text preference "

how can i solve " could not load language and text preference ".. help everyone...

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Datagrid - XML attributes and text

Please help with this. I am trying to load XML data into
datagrid. If I use only text nodes or attributes, I can get it
work. But if I have mixed XML content, I cannot get data I need.
All examples I've found so far use or just attributes or just
nodes. No mixed content.
<myDatas>
<data id="1">
<name nickname="jay"> JACK</name>
</data>
How to show all data in datagrid using HTTP service in
FlexBuilder?
<mx:DataGridColumn headerText="PROJEKT"
dataField="@id"/>
<mx:DataGridColumn headerText="ID" dataField="NAME"/>
<mx:DataGridColumn headerText="PONUDA"
dataField="@nickame"/>
This example shows just first two of them. I cannot get
nickname shown nut even using labelFunction. Also, I have more
complexed XML than this.
Please help & thank you.

Sorry for the typos Tracy. I've tryed to make it short and
clear to understand the problem. Here is (I hope) more litterate
version :)
xmlFile:
<myDatas>
<DATA id="1">
<NAME nick="jay">JACK</NAME>
<SURNAME middle="what">JILL</SURNAME>
</DATA>
<DATA />
</myDatas>
part of mxml file
<mx:HTTPService
id="dataFeed"
url="
http://localhost/data.xml"
useProxy="false"
/>
<mx:Script>
<![CDATA[
private function getAttributeNick(item:Object,
column:DataGridColumn):String
return (item["NAME"]["nick"]);

private function getAttributeUniversal(item:Object,
column:DataGridColumn):String
return (this["item."+ column.dataField]);
]]>
</mx:Script>
<mx:DataGrid
dataProvider="{dataFeed.lastResult.myDatas.DATA}" >
<mx:columns>
<mx:DataGridColumn headerText="ID" dataField="@id"/>
<mx:DataGridColumn headerText="NAME"
dataField="NAME"/>
<mx:DataGridColumn headerText="SURNAME"
dataField="SURNAME"/>
<-- this I cannot get to work -->
<mx:DataGridColumn headerText="NICKNAME-!OK"
dataField="NAME.@nick"/>
<mx:DataGridColumn headerText="SUR2-!OK"
dataField="SURNAME.@middle"/>

<mx:DataGridColumn headerText="NICKNAME-OK"
labelFunction="getAttributeNick"/>

<mx:DataGridColumn headerText="SUR2 !OK"
dataField="SURNAME.@middle"
labelFunction="getAttributeUniversal"/>
</mx:columns>
</mx:DataGrid>
Thank you for your interest.

Error loading master data attr and text for 0material

Hi gurus,
I am new to BI, I am getting an error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.
It is showing for nearly 100 records in the error stack.
Can anyone explain some basics,
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
<removed by moderator>
Edited by: Siegfried Szameitat on May 19, 2009 11:53 AM

Hi,
"Error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.RSDMD- 194"
Please check if there is any external characterstic in those 100 records, correct it and load again.
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
It does,t matter where the 0Material is. Info area in kind of Folder to easily locate and put the all the related objects at one place.
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
If it is a business content infosource, it will automatically map the attribute to data source field. If you are modifying or creating your own object, you should map it manually based on field name and description.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
If you will move any objects all the compounded objects will also come to the info area.
Regards,
Kams

Langauage issue -when loading master data text

I have a customer master data attribute and text .
This is master data is customized one. With in function module based on sy-langu it will extract the English,German,French.... customer data
R/3 side -Rsa3 transaction when i logon each logon language it is extracting the correct information with text values based on the logon language.
When I am loading the data for each language it is not loading.It is updating only the english.
I logged on as french ,German loaded data attribute and text also. Still it is not updating in the master data text values with french ,german.
Infopackage selection also I set DE and French.
Master data Infoobject - Text language dependent is marked also.
Advance thanks

Hello smartone,
I'm facing the same problem right now (only getting EN). So maybe we can share some experience.
On help.sap.com I found the following link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm</a>
Almost at the bottom of the page there is the description about the language vector. The settings made in this vector control the extracted languages. As a standard all installed languages in the system are marked here.
In the following link describes how to change the settings.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm</a>
But to be honest, I do not know how to get to the parameters. Otherwise I would have tried to check/change them. Does anyone have an idea?
Regards,
Martin

Help needed please -Master data loading- error with text loading.

Hi,
Iam S.Sushma. Iam getting error while loading master data from flat file- attributes and texts.
I have loaded attribute data successfully. But when iam monitoring the text data then iam getting following error.
""SET THE LANGUAGE FIELD IN THE SOURCE SYSTEM-LONG TEXT.""
""RECORD1: SRPID_1:DATA RECORD 1(EN S):DUPLICATE DATA RECORD.
"ERROR 4 IN UPDATE"
I took 2flat files for attributes and texts.
SRPID is key field.(sales representative id)
attributes:- SRPID, NAME1, AGE1, ADD1,PHONE1.
text:- SRPID,LANG,SHTXT,MDTXT,LGTXT.
Iam just a begginer so need your guidence. Thank you in advance.
Message was edited by: sushma sandepogu
Message was edited by: sushma sandepogu

Hi Eugene,
Thank you for your guidence. I have changed the order in flat file and got the results successfully. But when iam viewing the Master data text the S10 in coming in 2nd position in maintain master data-list screen i mean :-
SRPID LANG NAME AGE ADD PHONE SHTXT MDTXT LGTXT
S1 EN ABC 34 GDS 1234 AS ASD ASDDF
S10
S2
S3
S9.
Iam not understading why. Hope yu can help me. I have assigned full points to you for your previous solution.
Thank you in advance.
S.Sushma.

One Datasource to load Attributes and Text

Similar Messages

Maybe you are looking for