One Document in APP

Suppose there is 2 vendor. one vendor having out standing 100/- & anather is 200/-. While making payment form APP, System generates 2 documents for each vendor. can is it possible that we can post it through one document. Purpose is that bank account will have only 1 document.
entry will be
Vendor 1 Dr ...100/-
Vendor 2 Dr...200/-
Bank Cr....300/-
Please guide....

Hi,
APP post one document per vendor, practical benefit for this is:-
Example: - If you want to reverse the payment document for vendor 1 than with the entry suggested by you SAP will also reverse the payment document for vendor 2. Than again you need to post another payment document for vendor 2.
So, it is better to have one document per vendor.
Regards,
Anand

Similar Messages

TS3899 Hi. How do I attach more than one document to an email on the iPad, especially if they come from different apps? When writing an email on the iPad there's no option for attachments.

Hi. How do I attach more than one document to an email originating from my iPad, especially if the documents come from different apps? When starting an email there's no option for attachments, unless you send the document from inside an app like iBook and then you can only send one at a time.

How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
 Cheers, Tom

HT201301 Hi , I want to acces the documents of one of my apps using Itunes, and when I plug in the Ipad , it proposes me to initialize my Ipad ?

Hi , I want to acces the documents of one of my apps using Itunes.
I maintain several Ipas and usualy I have acces to the documents.
This time, with this Ipad, I have a scrren offering me to re-install the Ipad or create a new one .
I only want to access documents.........I do not want to reinitialize the Ipad.
can someone help me ?
Regards,

I don't recommend you switch to manual management as it is more work for a worse outcome. Play counts and ratings will no longer sync in both directions for example, and should you need to restore the device you will need to work out what has to be synced to it again. The whole point is that if you are syncing the device with selected playlists all management of what does and does not go on to the device can be done in iTunes, whether the device is connected at the time or not. Edit the playlists that you sync to the device, connect it, sync, and you're done. Since you have no need to micro-manage the content directly on the device when it is in sync mode, iTunes doesn't let you.
tt2

How do you attach/email more than one document from the pages app?

How do you send more than one document from the pages app on an iPad?

This is entirely frustrating and I have yet to find an answer for this question even though people have been asking it on the internet for over a year!
I am relatively new to apple and I was considering staying with them for my next iphone because of my apps, but after paying for this app and discovering I can't email more than one document "page" at a time? This makes no sense. Please fix this apple, I'd like to say you have replaced my tablet PC for home-office work but now I am reconsidering...

Can't open more than one document at a time

I have to open a few text documents. No matter of they are three or six, sometimes it will open but most of times, they won't. Also, Pages won't start after jumping for a while in the Dock.
If you open the documents from the Open menu it will work but the Dock icon is buggy.
There is no way to fix this as this may be a bug that sometimes happens and other times does not…
But thanks for reading.

Thank you again for taking the time to reply again in this topic.
"The latest" Pages app only can be… the latest version released, but again I can confirm as in my previous comment, YES the version is 4.3. There can be only *one* latest version possible! Pages 08 can't be the "latest".
Aside, yes, as I commented I created the Pages icon dock again but the problem is still happening. Also, I'm referring to full documents, not parts of them. One of three documents won't open, for example.
Computer is up to date, permissions are Ok, etc. No problem on maintenance.
The documents are .doc or .docx, not templates, not uncommon documents, not .dotx files. Just text document they made using Windows. I'm a graphic designer and I receive the localizations to translate Photoshop designs into 5 or 6 languages, so they send me those texts in one document each language, so the files are small, 1 page documents with no images, macros or anything else than a few text lines.
I've been using Pages for many years now and can't remember when it started to behave like this. Sometimes I just open those documents with Text Edit because it's faster and never fails.
If I open the documents dragging them to the dock icon, one by one, with Pages all of them will open fine. If I use the menu option, the documents will all open fine. It just fails when opening a bunch of them using the dock. Sometimes three out of five are open, in rare cases all of them are open or Pages is just stalled and won't do anything.
One example. I dragged all of these documents to Pages icon in the dock.
Five of them opened instantly except the last one: "Traducción mailing Son Antem_RU.doc".
If I drag this single document to the dock, it opens just fine like all the others. If I choose this one and 4 others, all of the five docs open fine. It looks like if there was a limit to open documents at a time from Pages dock icon, but this doesn't make any sense, I can open 15 documents at the same time from Photoshop, for example.
If I open all these 6 items from the menu File > Open… all of them are opened, no problems.
This eandom behaviour with no sense at all made me wanted to know what's happening with my Pages! It's really bothering me. Maybe I'll just have to change my habits and start using the File menu but I'm more of a drag and drop person.
Thanks for your attention and bearing with this little, but annoying problem.

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

[CS3 JS] Move pages from one document to another?

First, a brief explanation of what I am trying to do. I have several individual chapters that I am including in an INDD book. However, I also want to be able to allow those individual chapters to stand alone, meaning that I want to add a cover/title page to each chapter file (these two pages would be placed before the current page 1 of each chapter).
My preference would be to write a script that would open the cover/tp file and open the first chapter file; this part is no problem. Where I am running into trouble however, is the second step: moving the cover/tp pages (2 pages) over into the chapter file.
Manually, I would open Cover.indd, activate the "move pages" menu, "Move pages: 1-2", "Destination: Before_Page 1", "Move to: Chapter1.indd".
With over 100 chapters in the book, however, I would prefer to automate the process. I have looked into the Page.move and PageItem.move elements, but both look like they would require a location in the current document (either in (x,y) form or using "AT_BEGINNING".
If I cannot get this to work, I will likely try to insert two blank pages, then cut/paste with a script, but I would prefer the "move" functionality, if it is possible.
A couple of answers to potential questions:
I can't simply place the INDD cover file b/c it uses a text variable to pull the chapter name; this personalizes each stand-alone chapter.
Same answer to why I can't just slap the 2-page .pdf on the front of each. I need the text variable to still be active.
Has anyone tried to move pages from one document to another using scripting? I tried to explain what I am trying to do, but if it doesn't make sense, I can try again. :)
thanks!
Matt

ok here we are
I get a raw skeleton that you will have to adjust but it's functional.
Use a PDF for placement as you can specify the page that you want to place.
I don't know if you can do the same for indesign files.
So basically, it starts adding 2 pages and placeing the pdf in the same time.
After that, it creates the textVariable and the frame that will receive it.
Here you are:
//If a document is open
if(app.documents.length!=0)
var ad = app.activeDocument;
//Pages placement
for(i=0; i<2; i++)
//Add 2 pages on top of the document;
var tmpPg = ad.pages.add(LocationOptions.BEFORE, ad.pages[0]);
//Here you place your pdf
app.pdfPlacePreferences.pageNumber = i;
tmpPg.place(File(cover.pdf), false)
//You should specify page x and page y but ain't found yet the way to go.
//Text variable creation
//Check if the textVariable named "txtVar" does not already exist...
if(ad.textVariables.item("txtVar")==null)
//if not found, create the text variable named "txtVar"
var txtVar = ad.textVariables.add();
txtVar.variableType =VariableTypes.CUSTOM_TEXT_TYPE;
txtVar.name = "txtVar";
//Set the contents of the text variables to the string "test"
ad.textVariables.item("txtVar").variableOptions.contents = "test";
//these coordinates don't care aboutyour units but you may adjust them to your needs
var y1 = ad.marginPreferences.left;
var x1 = ad.marginPreferences.top;
var y2 = y1+5;
var x2 = x1+25;
var myFrame = ad.pages[0].textFrames.add({geometricBounds:[y1,x1,y2,x2]});
//Set the contents of the frame to the text variables "txtVar"
myFrame.contents=ad.textVariables.item("txtVar").variableOptions.contents;
//You may want to stylize the txtVar
//In this case, either you use a existing characterStyle or you create one in the script
Bye Loic

Copy a page from one Document to another

Can anyone help
In Pages '08 we had the ability to copy a page from one document to another.
In Pages '09 this does not seem possible.
Does anyone have anwser....
Thanks
Message was edited by: AJCUR
OK my bad
I just realized that I was in Word Processing in one document and Page Layout in another and you cannot do the copy between the two. Changed the Blank documentto word processing and voila it worked.

I think this might help. Go to the document you want to copy the page from and go to the "View" menu and choose "page thumbnail" so you can see the thumbnails on the side of the document. Right click (or control click) on the thumbnail of the page you want to copy and choose "copy.
Go to the document you want to paste the page into and make sure you have the "View thumbnail" option turned on. If you already have some pages click on the page you want the new page to follow and then right click and paste the page where you want it. (you have to do this in the thumbnail view area, not in the actual document itself.) If you have inserted the page in the wrong spot, just drag it to the right location. note: I have tried dragging the thumbnail from one document to another and it does not work. Too bad because it works that way with a PDF documents in "Preview" app.

Finding then combining content from several indesign documents in one document

Hi everyone,
I wonder if someone can help...
I'm trying to write scripts for indesign server which I want to:
a) search for,
b) pick out, then
c) put together content from one or many indesign documents into a template on the server starting at a pre-defined point in the template.
After that we produce a pdf of the document to pass on / do whatever. I've got so far with the scripting documentation but I'm stuck! This is what I've done so far:
1/ create a document template with a script
2/ add text elements to the document template (header and footnote, title,       body text i.e. intro and data, and the contact details)
3/ add text / content from another indesign file into this       document (so far only done it with a .txt file) ...
... I'm stuck on the indesign documents at the moment. I have       looked at various options, the most appropriate way I can see in       the manuals to get content from one document to another is by       duplicating. My understanding is to do this you have to target the text in the source       document, duplicate it and then add it into a text frame on the       target document. It's the targettting of the text and surrounding       elements in the source document I'm battling with.
any ideas on how I go about this effectively?
Any help and advice appreciated!

The story so far...
I've added the code kindly provided by getZinger (thanks again!) and am now stuck on the next stage, . I've commented the code where I'm having problems, and essentially have two key issues to resolve:
1/ how I get the documents to be placed one after the other, avoiding the overlay I get on the first insertion page.
   (I am using a fixed value as an insert point as the template I'm using will always have inserts starting on page 3).
2/ how I access the pdf's I want to insert from a location other than C:\Users\Whoever\Documents\
try{
for(myCounter = app.documents.length; myCounter > 0; myCounter--){
app.documents.item(myCounter-1).close (SaveOptions.no);
myDocument = app.open(File("C:/.../template.indd"));
myPDFFiles = ["pdf1.pdf","pdf2.pdf","pdf3.pdf"];
insertPdf();
function insertPdf(){
//I've gone for a static number here as the datapage in the skeleton doc is page 3.
//This seems to result in some of the pages being placed on top of each other :-(
    var myPage = myDocument.pages.item(2);
    /*var myPageNames = new Array;
    //Get the names of the pages in the document
    for(var myCounter = 0; myCounter < myDocument.pages.length;myCounter++){
        myPageNames.push(myDocument.pages.item(myCounter).name);
    var myPDFSet = File("C:/Users/Simon/Desktop/Mexico.pdf");
    for(myIndex=0;myIndex<myPDFFiles.length;myIndex++){
    myPDFSet = File(myPDFFiles[myIndex])
    myPlacePDF(myDocument, myPage, myPDFSet);
    myDocument.exportFile(ExportFormat.pdfType, new File("C:/.../test_insert.pdf"), false);
    myDocument.close(SaveOptions.no);
}catch(e) { myDocument.close(SaveOptions.no); }
function myPlacePDF(myDocument, myPage, myPDFSet){
var myPDFPage;
app.pdfPlacePreferences.pdfCrop = PDFCrop.cropMedia;
var myCounter = 1;
var myBreak = false;
while(myBreak == false){
if(myCounter > 1){
myPage = myDocument.pages.add(LocationOptions.after, myPage);
app.pdfPlacePreferences.pageNumber = myCounter;
//the files seem to be automatically placed from C:\Users\Whoever\Documents
//I need to change this to accept a different file path somehow but I don't know how
//this is why the myPDFFiles array only has filenames at the moment
myPDFPage = myPage.place(File(myPDFSet), [0,0])[0];
if(myCounter == 1){
var myFirstPage = myPDFPage.pdfAttributes.pageNumber;
else{
if(myPDFPage.pdfAttributes.pageNumber == myFirstPage){
myPage.remove();
myBreak = true;
myCounter = myCounter + 1;
once again, thanks for taking the time to read this, any help greatly appreciated :-)

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

The document "SpeechSynthesisServer.app" could not be opened because it is damaged or incomplete.

I just upgraded from Mac OSX 10.6.8 to OSX 10.8.
I logged into my account for the first time and had this error:
The document “SpeechSynthesisServer.app” could not be opened because it is damaged or incomplete.
From what I've been able to find, the SpeechSynthesisServer.app has to do with the Text-to-speech recognition.
Initially, I was unable to get text-to-speech to work correctly. But after I reset the key command, it worked.
Is this something I should worry about?

jfaughnan wrote:
I think this bug may hit people whose user accounts have gone through a few versions of OS X AND are going directly from Snow Leopard to Mountain Lion. In my case my user account started out with 10.2 - so it's picked up some cruft.
There are several items in my non-admin user Preferences:Users and Groups:User:Login Items that are not in my Admin account user including an item called SpeechSynthesisServer. It had a yellow warning triangle next to it and the data type was unrecognized.
I removed it from Login Items, logged out, logged in, and the bug was gone.
The LoginIn item is referencing a system app, that app is still present post upgrade:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A
/Frameworks/SpeechSynthesis.framework/Versions/A.
I suspect the app is still important. DON'T TOUCH ANYTHING IN SYSTEM/LIBRARY. Just leave it alone
iTunesHelper was also on the one user's LoginItems and I removed it.
I think there are a couple of bugs with the Login Item migration from SL to ML. For example, a disk image I mounted showed with a yellow icon too. I removed it, added it back in, and it was fine.
Thanks jf. That's helpful.
I installed ML an hour or so ago, going from 10.6.8 to 10.8.2. Having read quite a few comments I decided to take my time over this.
ML downloaded fine. About half an hour maybe. Installed itself then my iMac was restarted and, hey-presto, I'm back in business with a new OS.
Bit worried that my iMac was now rather sluggish, but not overly so because some kind person had posted on the App store that his Mac speeded back up after he had restarted. This proved the case for me too.
Went through all the set up screen re iCloud and App store. All the while I noticed my external backup drive was very busy too. Must be using it as temporary space I thought to myself.
Anyway, I decided that the first thing I should do is run Software Update. I had several items that needed updating and whilst one of them was installing, that dreaded message that all you guys are talking about popped up. I took a screen shot for later.
https://dl.dropbox.com/u/11373233/MacDiscussions/SpeechSynth%202012-12-08%20at%2 016.05.39.png
Not long after this my iMac's sceen turned black. I assumed this was due to the screen saver cutting in. It had done so about every 5 minutes during the time ML was downloading - apparently without causing a problem. I left it a while, then fired up the screen again. Then I got a dreadful fright when a message came up full screen telling me my iMac had encountered a problem and it was having to restart!
I decided toplay it cool and let everything play through and let the Mac restart, see what happens. Turned out I was worrying unnecessaryily, all I needed to do was run Software Update again. I downloaded the items individually this time, not all in one go like before. All seems okay - at the moment.
I still don't know what this SpeechSynthesisServer.app problem is. Text to Speech still seems to work. I wonder if it has anything to do with the new Voice recognition that I'm itching to try out.
Anyway, I'm leaving Voice recog alone for now until I'm more familiear with ML.
"DON'T TOUCH ANYTHING IN SYSTEM/LIBRARY." I notice that the Library is now hidden from us. Maybe what you say is the reason why?
By the way, I think I worked out why my iMac was sluggish when I first fired up ML. Spotlight was rebuilding it's database!
Message was edited by: El Deanio

I have both an iMovie.app and iMovie 9.09.app on my Macbook Air. Can I delete one of these apps without losing iMovie? I need to free up space on my computer as I don't have any space left.

I have both an iMovie.app and iMovie 9.09.app on my Macbook Air. Can I delete one of these apps without losing iMovie? I need to free up space on my Macbook Air as I don't have any space left. I've ordered an external drive in order to move photos and video there to free up space. In the meantime I have to make some room for incoming emails and to open programs. I've already deleted some documents.

You should find out which app you are using when you double click on a movie.
See:
Change Finder mapping from file extension to application
http://osxdaily.com/2009/10/25/change-file-associations-in-mac-os-x/
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
You can use the du command from the terminal to track down usage.
sudo du -cxsPh /Users/*
du -cxsPh ~

Recommendations needed for document management app

I want to be able to mail text files in various formats (*.pdf, *.html, *.docx etc) to my iPad, where the
files will then be displayed by title. I also want to add a couple of sentences of annotation to each item.
I should then be able to display any given item with a click or tap.
I can mail files to my ibook app right now OK but I can't see any way to annotate an ibook entry and I
really need that.
To review: Imagine that I am working from my desktop. I see a file I want to save to my iPad. I
download it to my PC and mail it as an attachment to my icloud account. I go to Mail in my iPad
and tap the 'Move' icon. The 'Move' icon gives me the opportunity to save it to the document management app,
whatever it is called. I then go to that app and annotate the saved file. The annotation appears next to
the file title. When I tap the entry the file displays.
I assume the right name for an app like this is text management or file management or document management.
What does this???
Thanks,
Fred Hapgood

I do a lot of counselling about a very complicated and dynamic subject. Right now I have to lug 20-30 pounds of reference texts from point A to point B to point C. I bought the iPad Air in hopes I could store this material in the tablet. But the reference material is complicated -- I guess I said that -- and I need lots of words to clarify what the subject is of each pamphlet and brochure, etc, before I can clearly differentiate one from the other. Imagine I have documents A, B and C. In the best of all worlds I would see a metadata display that looked like this:
File A -- Comments
File B -- Comments
File C -- Comments
Taking the filenames and the comments together I decide I need to look at C. I tap that and it displays.
That is the best of worlds. But I see GR allows me to rewrite filenames and maybe doing that will get me to where I want to go.
It does seem strange that with all document-handling packages out there there isn't one that allows comments in metadata. Oh well.
Thanks again,
Fred

When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

There is something on your iPhone (a music file, iBook, document or video) that belongs to another Apple ID. Only your wife would know how that file arrived there. Your iPhone is asking for the correct Apple ID for all of the files that are resident on the iPhone.

One Document in APP

Similar Messages

Maybe you are looking for