One DSP for Conference and Voice ?

Dear all,
I have one DSP (PVDM2-16) in the R2801 "12.3.11T". Can I configure HW conference and voice port (VIC2-4FXO) at the same time.
Indeed, I cannot configure as follows:
"maximum session X" under the conference profile. I only found X is "0". Can I allocate the DSP into different purposes?
Thanks for your help

Another problem with this config is that the PVDM2-16 is only 1 dsp, and conferencing requires a reserved dsp:
PVDM2-16 16-Channel Packet Fax/Voice DSP Module
1 DSP (TI 2510)
Q. Can conferencing share the resources with transcoding or voice calls of a single DSP?
A. No. Conferencing needs a dedicated DSP resource. If a DSP is assigned for a conferencing session, then it cannot be used for transcoding or voice call initiations or terminations. Transcoding and voice calls can share the resource of a single DSP, however. Note that conferencing needs a dedicated DSP, but not a dedicated PVDM2 module. For example, PVDM2-64 contains 4 DSPs; if one of them is used for conferencing, the other three can still be used for other purposes.
http://www.cisco.com/en/US/products/hw/modules/ps3115/products_qanda_item0900aecd8016c6ad.shtml
Mary Beth

Similar Messages

  • One number for faxing and for voice

    Hi,
    I would like to know if it possible to have one number for faxing and for voice.
    What I have read up is that Cisco can detect the fax tones. What I would like to do is route all inbound faxes to a viop dial-peer and all voice to another e1 port.
    I am just looking for some more info if this can be done.
    Thanks you?

    Yes this is possible with either cisco fax relay or t.38 fax relay.
    http://cisco.com/en/US/tech/tk652/tk777/technologies_configuration_example09186a00800a4adf.shtml
    http://cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a00800b5dce.html
    Hope this helps...
    Chester

  • Use one account for apps and other for itunes match

    Hello everybody
    My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
    Thank you in advance

    I would strongly recommend you not do this.  You will regret it.
    I have played with this issue a lot.  You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there.  You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again.  This really is not what you want to do.
    Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music.  You don't want to go though the other process.
    Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
    all store purchases on an iphone are linked to the store id.  if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app.  You can't have two store id's signed into your iphone at the same time.  They are all linked together.

  • HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

    I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

    I would complete unlocking as is and then
    restore as new once you know the iPhone is unlocked
    Be aware Orange will process the request at their speed
    one of the reasons they usually reside at bottom of User Sat surveys
    will likely take weeks
    This may also help
    http://support.apple.com/kb/HT5014

  • HT4436 how can i setup one account for me and my kids ?

    how can i setup one account for me and my kids ?

    One account each, or one account for all of you to share?
    Either way, follow the instructions here: http://www.apple.com/icloud/setup/
    Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

  • One maschine for dev and test

    Hallo,
    i have one maschine for dev and test. i know that it is possible to do this with 2 instances. SAP recommend to separate dev and test on separate maschines. But it is possible. have anyone experiance with that? When i don´t want 2 instances it is possible to have one instance and separate only the systems for dev and test in sld? Have I to copy the business systems, change the servers and make the configurations in integration directory?
    Thanks in advance...
    Frank Schmitt

    Hi Frank,
    one reason for having two systems
    is that you won't be able to import
    directory to your TEST system easily...
    because both r3 (dev and test will have the same integration server - you won't be able to add them to 2 different transport groups... )
    this means that you will have to create almost EVERYTHING
    in the directory twice... 
    at least without doing some tricks...
    make the life of a developer and create 2 servers
    it may cost less then using developers for creating many things twice
    Regards,
    michal

  • I wish to del one apple id and make one common for mac and i phone, please suggest

    i wish to del one apple id and make one common for mac and i phone, please suggest

    You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

  • Is there a way to have 3 itunes accounts set up under the same email address? one is for me and one for each of my sons to keep itunes money separated

    Is there a way to have 3 seperated itunes accounts set up under the same email address? one is for me and each of my two sons in order to keep itunes money separate.

    How to use multiple iDevices with one computer

  • I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    You need to get headset splitter adapter.
    http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

  • I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

  • My mother buy one ipod for me,and now she give to me. Can i  replace an ipod for an iphone locked to use only of United States? I'm from Brazil and i go to United States(Orlando) in November to live there some time.can i change the ipod to iphone so you c

    My mother buy one ipod for me,and now she give to me.
    Can i  replace an ipod for an iphone locked to use only of United States?
    I'm from Brazil and i go to United States(Orlando) in November to live there some time.can i change the ipod to iphone so you can use in the United States.

    No.
    There are no trade ins at all.
    You would ahve to buy a new iphone if you want one.

  • What is the best All in One program for picture and video editing?

    Hello i am new to photoshop and would like to really make some fantastic photos and video for my family and friends. I want to add effects to video and Edit photos to the 10th degree. Can someone please recommend an Adobe program. Should i get CS4 extended should i get master suite? Also where can i watch Video Tutorials that start from the basic and lead to the complex. Thanks in advance

    What is the best All in One program for picture and video editing?
    There is no such thing. If there were, nobody would bother writing different applications. If you are primarily focused on still image editing and video, Adobe Production Premium is the way to go. You can find any number of tutorials just by searching Google and many good ones are linked from the Adobe help systems as well.
    Mylenium

  • On my dashboard I have an icon with this @ on top.  One is for facebook and one is for Pinterest.  Can I rename them?

    On my dashboard, I have two icons with this @ on top.  One is for facebook and one is for Pinterest.  I would like to rename them or put the FB symbol something so they are easier to identify.  Is this possible?

    Tap the rectangle over the 2 lines and make sure it no longer shows up in red. At this point, you should have only the month view, no daily appointments below. Now press on a specific day, and this will either:
    1. Take you into the daily view with the hourly breakdown. If this is the case, tap the three horizontal lines at the top to get the list.
    2. Take you directly to the list view

  • One license for OSX and PC?

    Is there any way that I can purchase one license (with educational discount) and use it for BOTH my Mac and PC?
    Per the licensing: when I buy a copy I can install it on two PCs OR two Macs, but not one of each, correct? I personally think this is a bit ridiculous and refuse to buy two copies.
    Looking at the volume licensing, found at http://www.adobe.com/aboutadobe/volumelicensing/policies/?PID=2159997 it says..
    Cross-platform licensing
    Adobe Volume Licensing (AVL) customers receive product serial numbers for both Windows® and Mac OS as long as the product is available for both and the two platforms are the same version. Program members can choose to use either platform, as long as the total number of licenses being used does not exceed the number purchased."
    However, does that mean that I can use it on both, as long as they aren't running at the same time, or that I must choose to install one or the other?
    I am willing to buy the volume license (though a bit more expensive), but I absolutely refuse to buy two licenses.
    Is there any solution where I don't have to buy two licenses? (according to one site I can buy backup disks for each platform with a volume license, but I don't want to do that either)

    Yes, that particular language on multi-platform is explained here, and how that should work
    I don't think you have to buy backup discs unless you personally need them, although they're only $20 apiece anyway and not a bad idea to have

  • Ho do I use one monitor for OSX and Windows 8.1 bootcamp

    I am a long time Mac user, but find the fairly recent Apple switch to thunderbolt for monitor input very frustrating.
    For several years I have ran a Mid 2010 IMac 27" and input video from a Mac Mini running Boot Camp Windows 7 using Target Display Mode on the IMac. 
    This worked fine until I upgraded to a Late 2013 27" IMac and discovered that the  IMac has moved to thunderbolt as the input for Target Display Mode.  The new late 2013 27" IMac just will not display native Windows 7 or 8 from a Boot Camp Mac anymore.
    My problem is that I have two business/job related Windows apps that must run on a native windows 7 or 8 platform, and won't function under either Parallels or VMWare Fusion.
    I have tried. 
    And there appears to be no way to get any Windows machine with DVI or Mini Display Port output to drive a late 2013 IMac in Target Display mode.
    So, with great frustration, I have concluded that I need to purchase a non-Apple 27-30" monitor, and drive it with either a Mac Mini, or my Early 2013 15" MacBook Pro retina, running one of the Macs into on of the mini-Display Ports on the monitor and a native Windows 7 or 8 machine into a second mini-display port, switching between the two video inputs.   The Dell 30" monitor seems to get the nod.
    Has anyone found a better solution to switching between OSX and native Windows on one monitor?
    Thanks...

    Hi William,
    I had the same experience in December 2013 and contacted Apple about it. According to Apple it's an issue of Windows with Thunderbolt. Your older iMac from 2010 is using DisplayPort and not Thunderbolt for the Target Display Mode. Note that just the connector looks the same but it's still a different technology. Please further note that the response below does not apply for the new iMac 27" with the 5K display because this iMac does not support Target Display Mode at all, hence can't be used as external display. Of course you can still attach one or two external displays to the iMac 27" 5K.
    Hope this clears things up for you and the others.
    Thanks,
    Martin
    So, here is the important part of the official response from Apple:
    "... The Thunderbolt controller in an iMac is running exclusively in host mode. As such it cannot emulate a device mode Thunderbolt display. Instead it implements a custom Target Display Mode protocol that shares video between two peer to peer machines running with both controllers running in host mode. The "client" side of the driver does not exist on Windows so windows cannot speak to the "server" half in the iMac. There are no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows. The reason this used to work is that the older iMacs used DisplayPort for Target Display Mode. In this scenario the iMac was able to expose the panel in such a way that it looked exactly like a Display Port Device which Windows does have driver support for. ... "
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

Maybe you are looking for