One ear no longer works - not headphone issue

I'm not sure what the problem is, but suddenly out of nowhere, my iPod (video) stopped transmitting music to the right headphone. I know that this usually means that the headphones are broken, but they work fine with other iPods, and the problem occurs with other headphones.
I've only had it since last Christmas. I didn't purchase additional warranty, but would I be able to send it in for repair?
Thanks!

I have the same issue! Any help?????????????

Similar Messages

Only internal speakers works, not headphones or other speakers.

Only internal speakers works, not headphones or other speakers on my HP Pavilion dv6 Notebook PC.
Anyone know what the problem may be? I got Windows 7 64-bit.

Which audio driver are you using? Any new applications has been install lately?
Please post your model number.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Thinkpad T440s - ClickPad no longer working, not listed in /proc/...

This started earlier today. My clickpad used to work fine, now it's completely non-functional. I'm currently using a Logitech wireless usb mouse, which you'll probably see in dmesg&co below.
Some observations:
if I just boot and don't touch anything except entering my credentials into gdm to login to GNOME Shell, (not touching the mouse/clickpad), I don't have a pointer at all. Touching/clicking the clickpad does nothing. Neither device is in /proc/bus/input/devices. If I move my mouse, the pointer appears and works normally, and I see my Logitech mouse in /proc, but the clickpad still doesn't work.
Here's some output of various commands/files:
xorg log
dmesg
proc/bus/input/devices <-- clickpad not listed
xinput <-- clickpad not listed
lspci
lsusb
Here's some troubleshooting strategies I tried:
- Reboot
- Suspend, resume
- disable/re-enable clickpad in BIOS
- reinstall synaptics
- uninstall/reinstall laptop-mode-tools
- shutdown, remove battery, unplug, hold down power button for 2 mins (clear cmos?)
- weep/pray to Linus
- boot an Ubuntu live usb, confirmed clickpad is *not* working there.
- Update BIOS
- Tried reconnecting keyboard/trackpoint, wasn't able to access the connector, but it looked securely fastened
None had any effect.
I tried starting the synaptics daemon manually: syndaemon. But I get this: Unable to find a synaptics device.
I also tried removing/reloading the kernel module with modprobe, but I'm not sure which module is the right one. psmouse did not do the trick.
I looked through /var/log/pacman.log, to look for culprits, but the last major thing to be updated was systemd/linux on the 18th. The ClickPad was working fine this morning (suspend/resume worked fine). Specifically, it stopped working when I was in the car heading home for spring break. I had just compiled OpenJDK8 before I left, and installed "netbeans-devel". I suspended my laptop by closing the lid, got in the car. Reopened it, and then began to mess with Java 8. A suspend later and my clickpad was no longer working. I restarted, and it was working again. Then I suspended it for the rest of the trip. Upon getting home, it no longer worked and I haven't been able to get so much as a wiggle of the mouse pointer since then.
Anyone have any ideas?
Last edited by Everdras (2014-04-02 04:57:36)

Jcrash wrote:
Everdras wrote:
- weep/pray to Linus
Haha!
I had the same issue. Touchscreen worked fine out of the box but the trackpad/pointer was unresponsive.
Did you try using:
https://aur.archlinux.org/packages/xf86 … rackpoint/
On another note, I had a good experience with their hardware support. Cracked my touchscreen and jumped through the same hoops. Great turnaround time (<1week).
Alright, I've got my laptop fixed. Lenovo informs me that they replaced the motherboard. After putting my SSD back in, the touchpad works now! So it looks like it was definitely a hardware issue for me.
And yeah, lenovo support was incredible. They were very nice on the phone, didn't mind that I kept my hard drive, and they gave me 1-day shipping all over the place. I talked to them on the phone on the 28th @ 17:00 GMT-6, received my box on the 29th and sent it right back out with the laptop in it. They received it the 30th, fixed it the 30th, and it would've been back to me the 31st if that weren't a Saturday. So, I received it today.
Oddly, though, they accidentally sent me an (extra) repair box to my apartment- which I'm not at right now. /me shrugs.

My volume button's no longer working unless headphones are used

Hi all
The last couple of days, my volume button no longer works (it brings up the ringer box on display, but volume is unchangeable) and the ipod volume slider has disappeared from the screen. I can change the volume in settings, but no sound is being played through the internal speakers when used as an ipod (headphones work fine and volume buttons work with headphone). I still have internal speakers working when a phone call is received or an alarm sounds.
I've tried restoring from backup and hard resets, but neither of these things worked. No new software has been installed since the most recent backup so I'm at a loss what to try next so hoping someone has some suggestions

Thanks Deeco, I tried cleaning the headphone jack but that didn't fix it for me (although I'm not sure leaving it on a radiator all night would generally be a good thing so I didn't try that!!
But I have fixed it though
After the headphone jack cleaning didn't fix it, I cleaned out the charger/docking station connector with a plastic toothpick by running it very gently and carefully either side of the strip of pins - and got out a couple of rather large lumps of fluff - and this seems to have fixed the problem for me.
Hope this helps others fix theirs.

JNI Calls to Native Methods No Longer Work: Possible Versioning Issue ?

Hello, all. Just a quick question... is it possible that invoking a method in a JNI-compliant DLL from Java 6 will fail if the DLL's source was compiled against the JNI header files from Java 4 or 5 ? I have a DLL with methods that used to be called successfully (and now fail outright and don't even seem to be getting inside the native method), but it seems that the only thing that could have changed in the environment is the installed JRE. Even stranger, I don't get the hs_err* files anymore to indicate that the JVM crashed. Does anyone know why this might happen ? Thanks !

Cthulhu76 wrote:
Hello, all. Just a quick question... is it possible that invoking a method in a JNI-compliant DLL from Java 6 will fail if the DLL's source was compiled against the JNI header files from Java 4 or 5 ? Solely? No.
You could of course be doing something in the JNI code in terms of working with Java which no longer works. Just as it is at least possible that java code from one version might not work with another.
Correct error checking in the JNI code would at least correctly identify this problem however.
I have a DLL with methods that used to be called successfully (and now fail outright and don't even seem to be getting inside the native method), but it seems that the only thing that could have changed in the environment is the installed JRE.The only thing that you assume changed was the JRE.
You seem unsure whether the JNI is being called at all, so verifying that first would be a good idea.

Microphone no longer works on headphones, problem w/ phone not headphones

This is my dilemna: Something is wrong with my headphone jack on my iphone so that my headphones work to listen to music, but no longer to talk on the phone. In other words the microphone on the headphones doesnt work, so people cant hear me. And i know its a problem with the phone because i bought new headphones and people still cant hear me thru the built in headphone microphone. Has anyone else had this problem and if so can the jack be replaced? Im not due for an upgrade for quite awhile and would pay to get headphone jack on my iphone replaced.

Please save the call Apple, visit store answers just to gain points for whatever purpose.
No one gains points here by their number of posts, and people who answer questions here for no other reason than to help others volunteer their time to do.
Copied from this link.
http://discussions.apple.com/help.jspa#points
+*How do I get points for answering questions?*+
+If you reply to another member's question topic, you are eligible to receive points from that member, though this is at his or her sole discretion. The originator has the option of marking a reply as either Helpful or Solved, which will add points to the respondent's account. These points will, in turn, increase a member's ranking (status level) in the community over time.+
And what you are calling "packaged questions", which should be "packaged answers" was a reply directed to cmc13 in this thread after posting this.
I'm having the same issue. I can listen to music and hear people calling me just fine but they can't hear me through the headphones. *_I cleaned out the headphone jack but still nothing._* Very frustrating.
Perhaps you should read all posts in a thread before criticizing others who volunteer their time to help others when you do none or very little of that yourself here, and especially when the poster being replied to with a "packaged answer" has already tried what you've provided.

After installing Win8.1 and getting firefox Netflix no longer works says DRM issues, Id rather not use IE 11 please help?

Recently went from Win 7 to Win 8.1, everything worked AMAZING till I went to Netflix(in firefox id rather not use IE 11, also tried google chrome doesnt work there either). Each time I try to watch something on netflix I get a DRM problem. Ive tried in Chrome as well doesnt work. I understand that Microsoft and Netflix have made the change to HTML5 or something on those lines but in firefox silverlight should still work right? It does in Win 7, so why not in 8.1? Anyways I am wondering if any Firefox Users on Win 8.1 have found a Fix or a Workaround to solve this problem.

In case one of your extensions is involved, could you test Netflix in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?
In case your settings restrict Netflix's ability to set cookies or use local storage, you could simulate default settings by opening it in a private window while you're in Firefox's Safe Mode. That should let sites run normally but discard their cookies and local data after you close the private window.
You can open a private browsing window using either:
* Ctrl+Shift+p
* File menu > New Private Window
* orange Firefox button > New Private Window
Any difference?

Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

Just installed HP BIOS Update. System no longer recognizes my printer (6110 all-in-one). HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work.

Hey thecityhouse,
When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list? This may have to be performed to get the proper driver for your printer.
If this does not work, then I would take a look at the information in the post found here. It may provide a workaround to the issue you are experiencing.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Robo v9 Show/Hide without Twisties - One button no longer working

Hey there, as stated I am using Robo v9 with Show/Hide without Twisties (One button) with javascipts. We have most of our images using DHTML drop-downs and when folks click on "Show All Images" on the page, the GIF changes to "Hide All Images" and all drop-downs (our images) and expanding text are diaplayed.
It had been working all the time, but now it only works when I right click the topic in the TOC and choose "Edit Topic", then while in the Edit Window (Display view), when I do a View (Ctrl-W) and it displays the page within RoboHelp..I can click the "Show All Images" and it works like it always had. BUT, if that page is not in the Edit Window, and I right click "Preview Topic", the click "Show All Images" (or on the DHTML dropdown itself) it will NOT show the images, *but the GIF image does properly toggle to "Hide All Images" (and if I do again, then it properly toggles to the "Show All Images" GIF, if I do it again), but now NO images are getting displayed for some reason. It also NEVER works properly when I publish to our website (even when clicking the DHTML dropdown itself), but the GIF images toggle properly.
If I right click and choose "Preview Topic" and click "View With" and use Internet Explorer 8 it still never works anymore, unless the topic is in the Edit Window (Display View), so I know the issue is not on the server. It stops working after I do a generate and run on my pc. Also when I view it IE8 within Robo (and Allow the Blocked Content to run the scripts), many instances of the same error is shown as:
Message: Access is denied.
Line: 2646
Char: 3
Code: 0
URI: file:///D:/Users/_RBH9_TPO-Generate/v9-testing/ehlpdhtm.js
...but I *do* have access to the folder system, but in checking the coding of the ehlpdhtm.js, that area show, where I believe line 2646, character 3 starts at the "values = getAttribute(element, prop );" line below...but maybe something does not exist:
==
//End HTML code invoked function
function InitEffect( element, prop )
var values = null;
if( getAttribute(element,prop))
values = getAttribute(element, prop );
else if( getAttribute( element, "currentStyle" ) && element.currentStyle.getAttribute)
values = element.currentStyle.getAttribute( prop );
else if (element.style.getAttribute)
values = element.style.getAttribute( prop );
if( !values )
return;
var functions = new Array();
==
I have a much older backup when restored, it all works properly again in all cases, but I have done so much work since then that I think would need to be manually redone. I have played with keeping those some javascipts alone (in case I changed something) and updated the rest of the data files I had added, deleted the .CPD file, but it somehow stops working again, probably with some updated file. I am not sure what specific files could be causing the negative impact that is preventing it from working. Maybe if I knew what files could impact, I couldrestore those from my old backup. The newer backups when restored do not work properly, so there was a point in time where something changed and is causing this.
All prior versions of RoboHelp (v7 and v8) have always worked and still do. I am using v9.0.1.262, as the latest version has not yet been allowed on our pcs (per security), but since my earlier backup works, I thought it may not be the issue, but wanted to tell you anyway. ;->
Any ideas on how I should proceed? What files may have impact to cause it not to work anymore? The showhide.js is the only .js to show up as a baggage file. Also, the DHTML line does exits in each html page's code, as we are still using Robo v7 as the production software and the Show/Hide always works, and I copy them into the respective Robo v9 folders (and if new, then I copy them, then import them), otherwise the newer v7 updated pages are copied over the older v9 html files while RoboHelp is closed.
Thanks in advance for any info you can provide!

I may have figured out what to fix to get v9 back to working on the Show/Hide button, but not the "why?" .
It looks to all be dealing with the Robo automatic html coding of where to locate the .js file(s)...here is a quick overview of this issue and what I did. When I view the non-working pages within Internet Explorer 8 within Robo (and Allow the Blocked Content to run the scripts), I saw many instances of the same error is shown as this in the log, which implied since I *do* have access rights, maybe the file was just not being found.
Message: Access is denied.
Line: 2646
Char: 3
Code: 0
URI: file:///D:/Users/_RBH9_TPO-Generate/v9-testing/ehlpdhtm.js
OK, here are my findings. EXAMPLE #1 and EXAMPLE #2 below are excerpts of the same file. EXAMPLE #1 is from Robo v7 and is copied to the v9 folder after it was updated so our soon to be "production" webhelp will be from Robo v9 (instead of making the same manual updates in Robo v9 as in Robo v7, I copy the updated the .html file to the Robo v9 file system). Note the direction of the directory slashes of the java scripts listed below, as they are all DOS type slashes (back slashes), EXCEPT for ehlpdhtm.js as it is the ONLY one using UNIX (forward) slashes.
EXAMPLE #1 (from Robo v7)
==
<link rel="StyleSheet" href="..\..\sty-std-topic.css">
<script type="text/javascript" language=JavaScript x-save-method=compute-relative
src="..\..\showhide.js"></script>
</head>
<body>
<robohelp><script type="text/javascript" language=JavaScript1.2 src="../../ehlpdhtm.js"
x-save-method=compute-relative></script>
<script type="text/javascript" language=JavaScript1.2>

</script>
==
EXAMPLE #2(from Robo v9)
This is from the restored backup of the Robo v9 files that always work when I restore them, and note they are ALL UNIX (forward) slashes. These backup files were generated from Importing/Upgrading a copy of the Robo v7 files into Robo v9.
++
<title>[Endpoint Protection] Symantec Overview</title>
<link rel="StyleSheet" href="../../sty-std-topic.css" type="text/css" />
<script type="text/javascript" language="JavaScript" src="../../showhide.js">
</script>
</head>
<body>
<?rh-script_start ?><script src="../../ehlpdhtm.js" type="text/javascript" language="JavaScript1.2">
</script><?rh-script_end ?>
++
Additional info: The following is from another file from the Robo v9 backup files that always WORK and once again they are ALL UNIX (forward) slashes.
~~
<link rel="StyleSheet" href="../../sty-std-topic.css" type="text/css" />
<script type="text/javascript" language="JavaScript" src="../../showhide.js">
</script>
</head>
<body>
<?rh-script_start ?><script src="../../ehlpdhtm.js" type="text/javascript" language="JavaScript1.2">
</script><?rh-script_end ?>
~~
BUT since all .js files are referenced in EXAMPLE #1 have DOS slashes (back slashes), EXCEPT for the ehlpdhtm.js, I decided to change the line in ehlpdhtm.js FROM src="../../ehlpdhtm.js" TO src="..\..\ehlpdhtm.js" and IT (this one page) BEGAN WORKING AGAIN after I published. So having all DOS back slashes DOES work in Robo v9!!!! BUT it appears that Robo v9 only generates new pages using UNIX (forward) slashes in ALL coding. I've read about issues like this occurring with the FireFox browser, but we only use IE8, and have not read anything like this related to IE8 issues.
So if all UNIX forward slashes and all DOS back slashes can work in Robo v9 in finding and using ehlpdhtm.js, (the Show/Hide buttons function properly) why is this problem existing in Robo v9 when there are mixed "slashes" (using forward and backward)? ...and the mixed slashes ALWAYS works in Robo v7! They do not have to all be in the same direction in Robo v7 as it appears to have to be in the newer/more advanced Robo v9. Why does it matter that all slashes need to be all the same direction, if Robo v9 CAN actually read and figure out the DOS back slashes (formatted by Robo v7 creation) and actually generates UNIX forward slashes for the .js files in new Robo v9 output within the .html?
More importantly will I have to always do a Global search and replace in Robo v9 to change the direction of the "back slashes" when I copy updated Robo v7 .html files into the Robo v9 folders (instead of manually reworking each change), while in transition from v7 to v9?
Thanks in advance any information, recommendations, and feedback as your time is greatly appreciated!

Sony MDR-NC31EM No longer working as headphones, just mic

Tried with support but they couldn't replicate the issue, whenever I plug my MDR-NC31EM headphones in my phone it thinks it's a mic so no sound is played through them, at first I thought it was just the headphones themselves so I ordered a new pair but the new ones act just the same way, I don't believe it's a hardware problem since all other headphones I've tried work like they should, the problem also did occur at the same time as I updated to 4.4.4 so I'm wondering if it's a bug or something, does anybody else have the same issue? I did a software repair as adviced by the support at Sony but that didn't work, I don't know what to do, now I'm here with 100 bucks worth of headphones I can't use!

@munkiz
Glad to hear that it works now
@LondonZ2
Sorry to hear that you have this issue as well.
Could you please send me a PM with the information i asked for earlier?

One website no longer works correctly. O'k with IE. Recent updates to FF18, Flash 11.5.502.146 & Win 7 (64 bit)

www.dallastown.net school web site no longer loading images/info correctly. Works ok with IE.
Can maneuver around some by right clicking and opening in new tab. "Select a School" drop down is a specific problem area. Some times numerous clicks of the mouse will open the page properly. Still run in to problems with no response from a click or missing info.
A number of updates occurred recently, not sure where problem is. I currently have Java disabled, but tried with it enabled and no help. Uninstalled & reinstalled FireFox (18), no help. Thinking maybe a problem with FF 18 and Adobe Flash, but not sure what to do.
I appreciate any help you may offer.

Hello,
Thank you for posting on Mozilla Support. We value and appreciate as a user.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Did you know that Mozilla Support is helped out by volunteers? Be part of SUMO! http://mzl.la/OJtpch
Donate more than $30 and get a T-Shirt! https://donate.mozilla.org/page/contribute/joinmozilla

Droid Bionic 4.04 update. SMS no longer works and other issues

Performed the 4.04 update yesterday (Made my phone at a ridiculously hot temperature and drained my battery from 90% to 5% within 1:30 , great thing to start downloading without a prompt). Ever since the update my text messages will not load at all. I have tried with the default application as well as Handscent SMS. The default text messaging application will just continue to show that it is "loading" and with an apple style while circle, while handscent will just have a black screen then crash after awhile. If I receive an incoming text message it does not show at all. (Handscent will normally create a popup message).
Also when I turn the screen on from being asleep, sometimes the touch screen will not work, I will either need to wait a few minutes to turn the screen off then on again or restart the phone entirely.
Anyone know a work around where I would not have to reinstall the OS again?
Please let me know if you guys need any more information.

Give this a try Guys it should help some b33
Here is How you Clear the system Cache on the Bionic : Do as Follows
Step 1: power your bionic down
Step 2: hold volume up, down, and power simultaneously
Step 3: use the volume down to navigate to "recovery," use volume up to select
Step 4: you will get a screen with a triangle with an exclamation point, next to an Android. Press volume up and down simultaneously
Step 5: use the volume rocker to navigate to "wipe cache" and use the power button to select.
Step 6: after it has finished, use the volume rocker to navigate to "reboot system now" and use the power button to select.
You Can also Try a: Soft Reset
Here's How to perform a Soft Reset For your Bionic : b33
Soft Reset - DROID BIONIC by Motorola
A soft reset is the most useful tool for resolving a variety of issues. In most cases, a soft reset will not affect data on the device, unless the battery is very low.
If the device doesn't respond to input, remove then re-insert the battery.
Press and hold the Power button.
Select Power off.
Press and hold the Power button to power the device on.

Yoga 2 Pro touch screen no longer working & intermittent USB issues

Hey.
Got the Yoga 2 Pro 2 weeks ago. The touchscreen does not work at all today. I've reset/shutdown many times.
Here are the issues I have had in order of occurrence:
- webcam intermittently not coming up during verifice login on resume from sleep (probably ~ 10 times)
- touchscreen went mental, registering hundreds of touches per second all over the screen. Sleeping and waking stopped the mayhem. This happened JUST after plugging in a USB flash drive (which I have used before successfully).
- touchscreen does not work at all. Last night I had my phone plugged in to the laptop for a couple of hours. Touchscreen worked fine I unplugged the phone, but this morning on wake it is not responding at all no matter how many reboots I do.
The first two issues on their own I probably would have ignored, and this ccurrent issue I could imagine being some driver thing. But I worry that the two of them together imply some sort of big USB fault.
I'm not sure what the touchscreen is meant to come up as in device manager, but I've inluded a screenshot below.
Pretty desparate right now. I'm hoping this isn't a hardware fault because I need this laptop for work =$
Anyway, any advice/idas would be greatly appreciated.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

As an update for anyone else experiencing this problem...
I left the laptop charging, put it to sleep, and went away for an hour or so.
I just came back and woke it from sleep. The battery is now at 92%. The touchscreen now works fine.
Checking device manager, there are now additional devices listed under "Human Interface Devices". See attached screenshot.
Although it is now working, this and the other issues have been super annoying and I'd like to know if anyone else has anything similar happen, or if there are any fixes.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Magic Mouse Swipe Navigation Not Working - Not Preferences Issue

Hello.
Hoping to find some answers after days of frustration. For some reason, in Safari, when I swipe left to go back one page (like I've always done) my safari browser just freezes up and my only option is to close the window and start over. It's not the same issue I've found most people having where they need to reset their preferences. Mine are set correctly.
Is anyone else having this issue? Or have a solution?
I'll be more than happy to provide more configuration information if needed.
Thanks in advance!

Yep, have reset PRAM and SMC. Same issue.
It's actually fairly common - I've found at least 15 topics on this forum about it and a bit of Googleing revealed it wasn't just me. Can't find any topics that have a proper resolution though.
I did a fair bit of research before posting on here because I didn't want to post a problem that was specific to just me. It seems like it's a fair few people.
One "solution" is to install a 3rd party piece of software and assign right click to a right "tap" (not a full click) - that's not really a solution, more of a workaround.

No longer working with headphones

My daughter received a JBL docking station for Christmas, and after plugging in her iPod touch, the volume moves up and down rapidly (the screen indication) and will not play through headphones. What's the next step? I can't listen to her music ALL the time... this is why headphones were invented!

There is a switch IN the connector which Can get stuck removing and insetting headset many times often get it unstick

One ear no longer works - not headphone issue

Similar Messages

Maybe you are looking for