One Excise BOND For multiple plants
HI,
We have an Requirement like Physically only one plant , one excise registration and one excise bond , but logically we have multiple plants in sap deliveries will happen from all the plants , Excise bond creation as well as ARE1 Creation and Updating is happening for only one plant in SAP , but deliveries are happening from all the plants.
Please suggest me how we can handled this scenario
Thanks & Regards,
Gangi.
Hi,
As understand from your query, If suppose company having plants A,B,C,D and in that only A plant is Excisable and other plants are non Excisable that is Bonded plant. In this case if you are dispatching any material from A then only system to reduce the value/quantity based on the Bond defined and also same for ARE1 but for other plants not required to create any Excise Invoice or ARE1 or dispatch against bond because these plants are non excisable. In your system settings maintain the plant settings as non excisable for A,B,C
Please correct if any thing i written wrong.
Regards
Goutham
Similar Messages
-
Creation of one Excise invoice from multiple commercial invoice
Hi
Can it possible to create one excise invoice from multiple commercial invoice
regards,
K.S.Raohi,
I am trying in another way - creating one proforma invoice for multiple deliveries. and with that proforma invoice trying to create excise invoice.
But i am facing problem in creating proforma with multiple deliveries because of DIFFERENT NUMBER RANGE IN HEADER (delivery)AT FOREIGN TRADE --- UNDER ORGANIZATION --- NUMBER OF FOREIGN TRADE DATA - ( which is internally assigned by the system)
If i can get where this number is assign my problem is solved
K.S.Rao -
Single Subcon Vendor for multiple Plants - CTM
Dear friends,
We are planning some materials with Subcontracting scenario using CTM
Facing issue when same vendor is executing sub-con process of same material for multiple plants
Total demand of lower level material is flowing to a single plant instead of flowing to the corresponding multiple plants
Because of which excess planning is happening in one unit & no planning is occuring at other units which is leading to a mess
In library, it is provided to proceed with 1050 Location type but not clear on how to proceed further
Kindly guide on this
Regards,
AntonyHi,
Now Planning has to happen at dummy location of type 1050 and not at 1011 to transfer demand to correct plant.
Please check following-:
1. If you are using PPm create product in new location of type 1050.
2. Also check whether Tlane is created for components from plant to this new location.
3. Suggest to retransfer all master data including your subcontracting inforecord post creation of location of type 1050.
If you are using PDS product should get created in new location automaticaly.
Regards,
Santosh -
Is ATP for Multiple Plants possible????
Hi Gurus,
I have requirement like this
we are having two SAP Systems in one Sales order is raised.. and tha will pass to 2nd system with ALE. in Second system actual Availability Check will run for the plant given in the line item of sale order.
but in second system there will be 6 plants containing the same material. here my requirement is system has to check all the stock lying in all the plans at it need to propose the plant at line item level in sales order.
I know that Avail.Check will run for single plant. Is there any way to run this for multiple plants. at present user is changeing sales order and splitting line item into 6 line Items and performing Availability check based on that he is abelt find the in which plant stock is availble it become cumbersome process.
is any User Exit can we give multiple plants for checking Stocks???.
if End User is doing any mistake in doing Avail.Check it leads to Dead Stock.
please provide your Inputs on this
-PradeepBC,
Well, I will assume that you have been diligent and have already determined that the material masters are comparable between your qual system and your production system (I don't know what pre-production means).
First thing I would check would be the differences between qual and prod in availability check configuration. OVZ2. Look especially at the 'accumul' settings. Actually, any difference between qual and prod should be reviewed. Differences are a no-no!
Best Regards,
DB49 -
Release Streatgy for multiple plants
Hi All,
I have one PO with multiple Item having different Plants.
For Each plant i have a release streatgy with different release codes for each plant and in release streatgy i put characterstics like
1. Plant
2. Value
3. Purchase Organisation
4. Document Type.
Now my Question is that when i use mutliple plants for different line items of one PO.
How will my release streagty will work ? and how it should be configured ?
Regards,
Pardeep MalikHi,
Your Release strategy will not work.
In you want to get the release strategy for multiple plant then you have to define another strategy in OMGS u2013 say 01 u2013 07 as Multiple plant and for that strategy in CL24n mating all the characteristics and donu2019t maintain any value for your characteristics plant and then check.
Try it its very helpful -
Creating Authorization for multiple plants
Hi,
I have one requirement that, Creating Authorization for multiple plants
SELECT-OPTIONS: s_werks FOR mseg-werks.
AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
ID 'ACTVT' FIELD '03'
ID 'WERKS' FIELD s_werks.
1. If have no of plants in s_werks then how to authorize the plants?
2.if i dont enter any plant in my selection screen how to authorize that?
3. if i have 5 plant only then how i can authorize those perticular plants only?
Thanks in advance,
Thanks,
DP.S_WERKS is not a field; it's a set of fields. Use simple ABAP to select your plants and loop at the selection(s) to check...
-
Product Costing Period end processing - for multiple plants at a time
Hello SAP gurus,
Does any one knows how to handle the Product Costing Period End operations like WIP calculation, Variant calculation and Settlements for multiple plants (but not all). Even if knows how to do it as a period end batch job, that would be nice.
I know that we can handle this with Closing Cockpit. But i am looking for anything other than Closing Cockpit
Thanks in advance
SuryaHi
Apart from CO Closing cockpit, you can use the following programs to schedule the background jobs
T codes - Program names
CPTD - RKWTP_CPTD
KKS1 - RKKKS1N0
CON2 - RKAZCON2
KKAO - SAPKKA07
CO88 - RKO7CO88
Regards
Ajay M -
Hi Guys:
IN SAP R/3
My client has requirement to merge planning of material for multiple plants and run the MRP under one head plant.
For example:
Plant : 1000, 1001, 1002, where plant 1000 is a head plant who had authorization to perform MRP run.
if I run MRP Sepeartely:Each plant has below requirement for one material number (M1)
Plant 1000 : 3 EA
Plant 1001 : 2 EA
Plant 1002 : 5 EA
Instead of running MRP per plant, my client needs to run MRP for multiple Plants that Consolidate total requirement for all plants.
and generate PR--->PO , In the PO, M1 should be delivered to 3 different plant locations by vendor and Po Will be issued from Head Plant 1000?
Is there any Report in SAP , Where MRP Controller can See Requirements from Different Plants @ Central Purchasing level after one Multi Plant MRP run, So that he can decide on how much to allocate to each plant?
Thanks for help
Thanks
SwethHi,
If u want to perform the MRP in one plant for all the plant requirement is depends on the bussiness process.
You can try the following scenario:
Planning in one plant nd production in other plant - Respective master data and special procurement have to maintain.For
further clarity please follow the below link
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm.
We can evaluate the PR and PO by providing the authorisation object for the multiple plant to the respective users.
Revert me back in case of clarification.
Thanks
P.Srinivasan -
I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee -
How to use one email adress for multiple recipients
Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx -
One search help for multiple select-options in webdynpro abap
Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID VARBL VALUE LANGU VTEXT
ADS $WERKS 1 T Werk 0001
ADS $WERKS 11 T OZYAS GIDA URETIM YERI
ADS $WERKS 5501 T BOYA GEBZE FABRİKASI
ADS $WERKS 5502 T BOYA CIGLI FABRİKASI
AGT $WERKS 2301 T KAMLI DAMIZLIK
AGT $WERKS 9601 T PANAR DENIZ URETIM YERI
ADS $VKORG 22 T AA KİMYASALLAR
ADS $VKORG 8001 T İINSAAT BOYALARI
AGT $VKORG 6500 T DAMk St.Org
AGT $VKORG 5400 T PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERALHi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua -
Can I use one itunes account for multiple users and multiple devices
Can I use one itunes account for multiple users and multiple devices?
The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....
-
How to create one inbound delivery for multiple purchase order?
Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU? -
Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items
Hi All
Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
NOte: Suggest me the Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
Regards
Shivakumar BandariHi,
Here is the sample code to do that...
*---> po header data
wa_poheader-vendor = your vendor..
wa_poheader-doc_type = Your doc type..check with Functional contact....
wa_poheader-purch_org = Purchasing Org..
wa_poheader-pur_group = Purchasing Group
*---> po header data (change toolbar)
wa_poheaderx-vendor = 'X'.
wa_poheaderx-doc_type = 'X'.
wa_poheaderx-purch_org = 'X'.
wa_poheaderx-pur_group = 'X'.
*---> poitem data
data: item like ekpo-ebelp.
item = '0010'.
loop at t_parts.
it_poitem-po_item = '00010'.
IT_POITEM-PLANT = Plant..
IT_POITEM-STGE_LOC = Sloc...
*---> poitemx (item data change toolbar)
it_poitemx-po_item = '0010'.
it_poitemx-po_itemx = 'X'.
IT_POITEMX-PLANT = 'X'.
IT_POITEMX-STGE_LOC = 'X'.
*---> add record's to internal table
APPEND: it_poitem,
it_poitemx.
endloop.
*call bapi_po_create1
CLEAR v_ebeln.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = wa_poheader
poheaderx = wa_poheaderx
IMPORTING
exppurchaseorder = v_ebeln
TABLES
return = it_return
poitem = it_poitem
poitemx = it_poitemx.
*---> check the return table for error message
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
endif.
Thanks,
Murali -
Restrict PO creation for multiple plants for same company code
Hi Gurus,
We want to restrict PO creation for multiple plants in the same company code. Based on Standard SAP settings for Purchasing organization assignment with multiple Plant and multiple Plant assignment with single company code, this is happening. Is there a way that we can restrict by doing some customization change.
Any thoughts or ideas will be highly appreciating.
Thanks and Best regards,
Karun KumarHi,
Said functionality is not available in SAP standard.
To avoid the same ,i can suggest implement release strategy for PO,and then higher authority / commercial team can check created PO,if multiple plants available in single po then they have the option of rejection for the same.
Or else check BADI-ME_PROCESS_PO_CUST,take the help from abapor and apply the restriction to select multiple plant in PO.
Hope this will resolve your query,
Thanks & Regards,
Sandesh Sawant
Maybe you are looking for
-
i have retrieved data from mseg and stored in one table where werks in s_werks . MJAHR ZEILE BWART MATNR MENGE MEINS ztable : contains BWART and indicator field indc. Now this i_mseg data will be totaled on Material and plant. Issued qty at material
-
Download the PDF Form as a attachment when button click in BSP application
Hi All, I have scenario, when button click in the BSP application PDF Form want to download in the IE (like one window open with Open,Save and cancel button). I have written this code: data: pdf type fpformoutput-pdf. < Logic for populate value to pd
-
Mail.app crashes while trying to change layout
Mail 2.0.5 crashes every time I try to change the layout of the "new message" window. When I'm going to create a new message you can see on the left side of the "account" line a symbol (three little lines and an arrow down). With this option field yo
-
How to open a .session file?
I have a .session file. Basically I had many tabs open and then saved them in a .session file for later use. I now can't open it with the version 26 or even 22. When I open it, it just shows them in text form. Is there a way to open this .session fil
-
Please help me reset my canon Rebel T5 1200D to factory defaults. I do not have tools #3
Please help me reset my canon Rebel T5 1200D to factory defaults. I do not have tools #3