One good IP, one bad 169 IP

I am working in a small home office. We have two computers:
One is an iBook G3 running on OS X 3.9
The other:
An iMac G3 running on OS 9.2.2
We use a broadband modem and connect the two computers to a router (not wireless). Both computers are connected to the router with an ethernat cable.
Now once upon a time, both computers connected to the internet through an old router which recently died, and was replaced with a Netgear 10/100M Switch, but before any of that both computers connected to the internet fine until one day after a black out in the bulding. Now only one computer is able to connect to the internet while the other is unable to.
One day, when he had no internet on either comp, we called our ISP and they directed us to connect at least one of the computers directly to the modem, turn off the modem for 5 seconds, tunr off the computer, turn on the modema dn then restart the comp. Of course the computer received teh correct IP address and we did the same thing with the other computer, and THAT'S when we got the problem.
Whenever we directly connected a computer to the modem, shut both the modem and comp off and restarted, one computer would receive the right IP address while the other got the bad 169 IP, everytime.
We need to have both computers connected to the internet, but for now the only one connected is the iBook laptop, while the iMac remains unconnected and idle.I tried deleting the TCP DNR on the the iMac, and the TCP/IP preferences as well and still couldn't connect.
We use DHCP and our address is provided by our ISP.
Can anyone give us some suggestions, anything to work with to try and solve this problem?
iBook G3 Mac OS X (10.3.9) 900 MHz PowerPC G3
Power Mac G5 Mac OS X (10.4.2)

It sounds like you have a DS104 or DS108, which
funnily enough is the exact same model i bought many,
many,
What you need instead is an Ethernet 4-port router,
with DHCP and firewall. The Netgear RP614 is probably
ideal, although you could go wireless (for extra
cost) if you want to.
Hi Simon,
I also have a Netgear switch FS105 so that will not connect my imac and ibook allowing both to use internet.
The Netgear RP614 router you mention. Do you know if it will work with OS 9.2.1
Regards,
Alan
indigo imac 350 slot loading + 256 mg Ram = 320. 6 gig hard drive Mac OS 9.2.x Blueberry g3 clamshell ibook OS 9.2.2

Similar Messages

Why did my charger already go bad..bought another one and it went bad..now phone will not charge..only had it 2 months..what a disappointment so far..should have stayed with Apple..would like to get my money back. Terrible experience so far.

Why did my charger from Verizon already go bad..bought another one and it went bad..now the phone will not charge..what a disappointment and a hassle..should have stuck with Apple..only had the phone 2 months. Hope they will exchange it!!!!!!!!!!!!

This is either a Phone issue or an Electrical issue in your home.! when charging Do you always use the same electrical outlet? or did you try others..
You will know or should know if there are any issues with your other Electronics.. that you Plug into it..
If it is the s5 which it sounds like it could be then the Local Verizon store at there Discretion will determined if replacement is needed you have a 1 year Manufactures Warranty that covers for things like what your Describing I would take it too your local store see if they'll get you a Replacement or you may have to go through Samsung..
But I would Try another OUTLET just to see if your phone charges with it.. And Good Luck b33

Free Goods from One Material Group to Another Material Group

Salute Masters!!
I need your valuble suggestion, please provide.
I need to configure Free Goods of Material Group to Material Group.
User want:
1) Free Goods from one Material Group to another Material Group, like F010 to F040
2) User should have option to change from one Material Group to Other Material Group, which He / She want, like F010 or F020, F030, F040 any one of them.
Suppose;
Line Item Material Belongs to One Group Quantity in Gallons Free Goods from Any Material Group Quantity in Gallons
      1            A                                              3                                    F010                                             4
      2            B                                              3                                     F020
      3            C                                              4                                     F040
Any No. of Line Item Any No. of Material
                                   from One Group      Total 10                   From Any Material Group
(Comprising of 3-4 Different Material from 1 Group, they should be able to choose/provide Free Goods from other Material Group)
3) While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
How I can configure this scenario?
Please suggest, is it possible through KEY COMBINATION?
Rgds.
Srivastav
+91 7829755109
Skype ID: sanjai.srivastav1

Hi,
if you want to give free goods from other group it can be possible only for EXCLUSIVE free good type
In exclusive free goods, a material different from the orignal material can be specified as the free goods.
Example: A customer who buys 200 crates of beer, gets 5 boxes of glasses free.
In VBN1 >> Exclusive
See column ADD FREE MATERIAL
While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
Maintain alternative units in material master >> Additional data >> Material master,BUT it is only main item
Those item u want to give free that items unit is derived from free goods condition record and it CANNOT be change in order

This is a follow up. In response to Chris Rake's answer: ports open fine, there is one good read, and then just zero length strings in ports buffers.

The old server works fine. This problem occurs on our new server only. We want to run the same app on the new server. Of course not at the same time. So we shut down the old server before starting the new one. But we still get just one good read from the serial devices. We do not get any error message. Would it be possible to get a phone number so that we could call the NI and describe our environment and the issue we came across in more detail. Thanks.

1 (800) 433-3488
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

One good use for a PC

Found one good use for my vaio laptop.
I had a problem that went like this:
Adventures in Sony Mini DVD land....
Original Message ( Posted Oct 11, 05 7:49 am )
OK...
I've read & digested all the good advice 'round here regarding getting DVD into FCE.
SCENE 1, Act 1:
Customer gives me Sony Mini DVD's recorded on an NTSC cam, and wants an edit deleiverd in DVD NTSC. I live in a PAL country. And I own a cheap camera that doesn't appear to have any kind of NTSC playback or recording option. I use this to digitize. So recording the analogue output of my DVD player is out.
Paid my money and got DVDxDV..
YAY! working well EXCEPT!!!......
SCENE 2: ...these DVD's are dual sided. the contents of side 1 show up as what I assume are chapters. These I converted to NTSC for Final Cut and everything is rosy. However the final chapter thingy seems to be an fast forward silent montage of the contents of side 2 of the disc.
The other side of the disc placed upwards in the DVD tray gives me no joy in either DVDxDV or in Macs DVD player. The superdrive won't touch it.. Both sides play on my domestic player.
Anyone got any experience/advice/ideas/condolences to share?
Tearing my hair out, and if you've seen my picture (think Yoda but pink) you'll understand why that can't be a good thing...
Pete
Then..
UPDATE:
the superfast forward montage thing is stills captured to the disc.
I used disc utulity to make a new disc image (.cdr) which has a ts_video folder and a DCIM folder which has stills in it.
No idea of whether or not I'm getting anything from side two in amongst all those chaptery thingos I converted.
Now I have a Video TS folder I might try opening THAT with DVDxDV.....
+ + + + +
Well no joy with side 2 till I had this flash...
Sony Laptop, sony proprietary stupid format. Maybe if I...
Then bingo! The vaio recognized the files, I copied them to a cdr, and i carried the disc over to my uncooperative mac.
So the whole thing is laid out here for anyone who ever gets lumped with this kid of edit job.
BTW Google was totally useless on this topic (where the dual sided version of these dumb sony 8cm DVD's was concerned)
So, as it turns out, this info could be worth somethin'...to someone...

Thanks for the feedback Master Y.
PCs do come in handy. I use one every day for various duties.
I still love my Mac, even thoug hit's done quite a few laps.
Al

Multiple free goods for one item in standalone CRM

Hi Gurus,
We are trying to implement multiple free goods for one item in standalone CRM.
As per SAP.help.com, it says that we can configure multiple free goods scenario in standalone CRM system.
We tried to set up this in our system. Basically we want to implement the scenario, where a user wants to purchase item A, he should get a prompt for choosing between two free goods B and C.
We did the relevant IMG settings required for Free goods at IMG ->CRM -> Basic Functions -> Free Goods.-> Set up Free Goods
We also did the relevant item category determination where we have made an entry with
Item Usage = " Free Goods" , Main item cat. = "TAN' , Item Category = "TANN".
Now we went to create condition records in the path "SAP Menu -> Master Data -> Prices and Conditions -> SAPCND/GCM - Maintain condition"
We chose Application ="PRT", MaintenanceGrp="PRT_FGOODS", Maintenance context ="GCM"
Then while creating conditon records , when I try to create two condition records where the Main Product is same but free good product is different, the system is not allowing to save these two condition records.
it is giving error "Overlapping validity periods for two condition records".
Please advice, if i am missing something. Thanks in advance for your help.
thanks,
Randhir
Edited by: Randhir Soni on Feb 8, 2010 8:12 AM

Constraints in free goods in R3 taken from SAP library
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
This answers your qn Not possible in R3
If you are on Retail scenario this is possible thro bonus buy schemes
But a lot of customizations needs to be done and you need a retail server to do that
Regards
Raja

Can't add a goods-issue with more than one item and one is serial managed.

Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006        with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
          .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
          .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
          .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
          .SetCurrentLine(n)
          .Add()
          rs.MoveNext()
          n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

Hi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick

Hi gurus, can any one explain me about Badi & Bapi with eg.?

Hi gurus,
Can any one explain me about Badi & Bapi with examples.
Regards
Raghu

Hi Raghu
1) Badis means:
The BAdIs of the enhancement concept are not treated as standalone objects, but are integrated in the overall concept. Thus, the tools for defining BAdIs are part of the Enhancement Builder included in the ABAP Workbench.
Transaction SE18, up to now the only entry point for defining classic BAdIs, now manages classic and new BAdIs. When an existing BAdI is displayed or changed, it analyzes whether the BAdI is a classic or a new one, and then switches to the respective tool. In the case of a new BAdI, this tool is the enhancement spot editor
2) Bapis means:
BAPIs can be called within the R/3 System from external application systems and other programs. BAPIs are the communication standard for business applications. BAPI interface technology forms the basis for the following developments:
Connecting:
New R/3 components, for example, Advanced Planner and Optimizer (APO) and Business Information Warehouse (BW).
Non-SAP software
Legacy systems
Isolating components within the R/3 System in the context of Business Framework
Distributed R/3 scenarios with asynchronous connections using Application Link Enabling (ALE)
Connecting R/3 Systems to the Internet using Internet Application Components (IACs)
PC programs as frontends to the R/3 System, for example, Visual Basic (Microsoft) or Visual Age for Java (IBM).
Workflow applications that extend beyond system boundaries
Customers' and partners' own developments
Thanks
Trinath

Two Invoices with respect to One Goods Receipt

Dear Experts ,
We have got a query from a user like this....
With respect to one Goods receipt can we do two invoices??
i.e GR with a quantity 50No for Material 'A'
Two invoices with Material A and Quantity of 50 for a single Goods Receipt..
How it is possible????
Please guide me...
Regards
MK

Hi MK
If u have activated duplication check for invoices then u can not pass two invoices with same Po number and similar data
U can set duplication check in SPRO
Path
SPRO>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate Invoices
here u can tick Required options for UR company code
Vishal...

My account is good for one computer. Or is it?

My iTunes setup says that my account is good for one computer. Would that include using the iPod (account) connected and synced to my PC? Do I need to similarily setup the same or different account on my iPod? Please explain. (Note: My iPod already syncs with the CD I added to iTunes in my PC.)
How many pieces of gear can used in this fashion (ie: iPod, iPad, iPhone, and computer), I'm guessing management on one computer plus another piece of hardware like iPod . . . or am I wrong?
I guess to avoid confusion . . . is one account for both sufficient and agreeable to Apple?
Any advice or help will be appreciated.
TIA

Well, I'm getting on since I hit Trafalger when I was 18 (old enough to hit the pubs there but not here). I hung out at the Friend At Hand and drank Watneys (and anything else). Made it to Liverpool, Torquay, and in between. Some of my best memories. Almost had a ideal job at BOAC, but immigration quotas from the far east nixed that. Still listen to Radio Caroline on this side of the Atlantic.
Got my connection and account to iTunes working on both the PC and iPod now. Haven't located iTunes radio though on the iPod. Do you know if it is even possible with the older 4.2 version?
Thanks, again.

Can I begin service with $100.00 card good for one year and what are the usage terms?

Can I begin prepaid service with a $100.00 card good for one year and if so what are the usage terms?

Yes; phone is for Verizon PREPAID plans. Sri I did not state that correctly. I see that there are prepaid plans with monthly usage etc. I see some offers on line for a $100.00 card that's good for one year. Trying to determine if that is available from a Verizon store to begin a new plan. Checked with two different Verizon stores and got two opposite answers and neither was sure of the terms. Simply trying to get a low cost backup. Thank you for responding.

One Goods Issue document for more than one delivery

Hi
I would like to know if it's possibile to post one goods issue relative to more than one delivery. Generally the relationship between goods issue and delivery is one to one but we have the necessity to create one global goods issue relative to more than one delivery. Do you know if it's possible? How can we do?
Thank you very much for your attention
Andrea

Hi Andrea.,
I dont think it is possible in standard SAp functionality,it may be possible with some technical changes
REWARD if helpfull
Thanks & Regards
Narayana

Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop

Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop. For example both versions of Til' I Collapse by Eminem won't play on my iPod but on laptop, same with Born this Way by Lady Gaga

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

T440s - The good and the bad.

This is my honest opinion that I'm posting here so that I may assist in anyone looking to purchase a T440s. I ended up sending mine back and obtained a MacBook Pro 15 Retina, which now runs Windows 7 flawlessly. I'm not here to discuss my Mac (and I still hate Apple as a company, lol), but I want to share the good and the bad things about my T440s experience:
The good:
- Oh so stylish... I love the minimalist business-like look.
- Very light.
- Very good screen (in my opinion... I got the HD version).
- Fairly capable performance-wise. It calculated a Fibonacci(1 through 50) in C# in 20 minutes and some change, which was not as good as the other-mentioned laptop, but it was still pretty decent. It also did amazingly with VS 2013 and Blend open at the same time. No hang-ups, nothing. And that was only with 4GB RAM, since I didn't install the 8GB stick (had no time, because of the repairs... more on that later).
- Battery life is superb. Under full-on stress, which most people would never unleash on this machine, I was able to get 1 hour and 42 minutes out of it. This was done using Battery Eater. Therefore, one can easily expect 4+ hours under normal development.
- Good build, except the touchpad (more on that later).
- Amazing keyboard. I'm speechless. That thing was a dream to type on. I would compare it closely to my mechanical keyboard. Obviously, it's not as good, but I've never felt a better keyboard on a laptop.
- The fact that it has an internal and an external battery. Hot swaps with spare packs... how awesome.
- Very slim, in my opinion.
The bad:
- The touchpad is horrible. It feels like a two-cent piece of junk on a $1,500 laptop. As soon as I got it I couldn't believe it. My wife was in shock too. It was very loud, even with light clicking and the rattling sound after the click was horribly annoying. I sent it in for repair, and instead of fixing the touchpad (regardless of whether a new one was put in), they ended up misaligning the keyboard bezel, so the right side is popping up slightly as if it was forced onto the body.
Mind you, it's not like I was overly picky or anything. This is a known problem, but I didn't do my homework prior to the purchase. Also, the original gentleman on the phone (who was pretty awesome comparing to others) said himself that it was strangely loud. I clicked it very softly and he was able to hear it on his side without my phone being on speaker or anything. He tested a model next to him and I couldn't hear it. He said his touchpad was very quiet.
- The drivers for the touchpad are pretty atrocious. I was able to get it to 80% efficiency, but the cursor still jumped around when clicking once in a while. This created a lot of frustration, as things were closed or opened accidentally.
- This is not particular to the laptop, but to the company... the customer support was horrible. Most of them were polite, except the person that closed the chat session on me when I decided to question why the keyboard bezel was being replaced... and him closing the chat session was not a technical issue (I asked the next rep to explain). However, nothing got fixed and the laptop came back in worse condition than I sent it in. I mean... it's a 2-hour old laptop and it already has misalignments and a scratch. Yes, I forgot to mention that. On the right side, it appeared as if they were trying to pry it open and put a slight scratch there... not ridiculously important, because it does not alter the performance and it was not very noticeable, but when coupled with the rest of the things... yeah, no go.
Would I recommend this laptop? If you don't expect a good touchpad and never care to get it fixed, sure. I would love to own if it had a different touchpad... but I'll just revisit this idea in five years or so. You might also get lucky and get one that doesn't have the touchpad problem, but this might be a rarity from what I see on the forums.

@bkboggy: the only solution is that you should tap gentle and softly that you won't produce a click
Maybe You should go for an on-site guarantee, that might help not sending back Yours t440s
Regards,

How do you sync more than one iphone on one computer

how do you sync more than one iphone on one computer?

Just plug in the second iPhone like you did the first and tell it what to sync to and you'll be good to go (just make sure the second iPhone is named something different than the first!)

One good IP, one bad 169 IP

Similar Messages

Maybe you are looking for