One Goods Issue document for more than one delivery

Hi
I would like to know if it's possibile to post one goods issue relative to more than one delivery. Generally the relationship between goods issue and delivery is one to one but we have the necessity to create one global goods issue relative to more than one delivery. Do you know if it's possible? How can we do?
Thank you very much for your attention
Andrea

Hi Andrea.,
                    I dont think it is possible in standard SAp functionality,it may be possible with some technical changes
REWARD if helpfull
Thanks & Regards
Narayana

Similar Messages

  • Blocking Goods Receipt for more than one PO

    Dear All,
              We have a requirement. We do not want to do goods receipt for more than one PO.STD SAP is allowing us to do the same.
    Can we block it ? We want one One Material Doc for One PO .For One PO there can be more than one material document but vice versa must not be allowed.
    Thanks & Regards
    Abhijit Das

    seems to be possible with custom development
    logic may be as follows
    This is just a generic suggestion
    If I put PO number and press enter then the field where we put PO should become grey...
    take help of abaper to findout the way.....
    GIVE A TRY.....

  • Automatic goods receipt for more than one phase

    Hi all,
    I want to make automatic goods receipt in the confirmation COR6N for more than one phase , i know that it is not possibe in the standard system but is ther any fuction module or note can support this issue?
    Regards
    Ahmed Sobhi

    Dear Ahmed Sobhi,
    If my understanding is correct,then it's not possible to perform Automatic GR for more than one operation or phase in standard
    SAP.
    Regards
    Mangalraj.S

  • Can i take the printout for more than one billing document in SD at a time

    HI ALL,
    The issue is '' i want to take the print out for more than one SD - billing document at a time.
    is there any config settings to be done.
    please guide me if u have the solution ASAP.
    Regards,
    SOMU.

    Yes, it is possible. However you may have to enable a field NAST-ANZAL. This field is available in VV31 when you are maintaining the output records. The field Number of Messages can be filled with the numberof copies youwant.
    However, I think you have to read this in your custom program to trigger n number of copies. If that is done, you can take the printouts as many times as you want in a single trigger.
    The code approx looks like this
    IF nast-anzal EQ 0.
        nast_anzal = 1.
      ELSE.
        nast_anzal = nast-anzal.
      ENDIF.
      nast-anzal = 1.
      nast-dsnam = nast-kschl.
      nast-dsuf2 = vbdkr-vbeln.
      DO nast_anzal TIMES
    If you show this field and talk to your developer, he should be able to help you.
    Hope this helps.

  • Help me to search on calendar for more than one year

    I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system.  I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

    Jens,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Reversing Landed Cost document with more than one vendor

    Hi Experts,
    Reversing Landed Cost document with more than one vendor:
    My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
    Created Landed cost by selecting 2 vendors in the Vendor field.
    After you picked one vendor, you go to the vendor code/name again then choose another vendor you
    need, once you picked, the system will ask you whether you want to delete the previous data, then
    you say no, after then you will see the vendor name became "different vendors" and code be "********"
    (on the vendor tab: you will see two vendors)
    To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
    I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
    zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
    the vendors for Good Receipts & Landed Cost.
    Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
    To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
    can with one vendor to reverse the transaction.
    Can this functionality be added to future versions?

    Take a look at business area and groupings in they payment program settings...
    I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    Grouping Open Items and Individual Payments
    Wherever possible, the payment program will always group items together for payment.
    The payment program can only group together open items for payment if the open items in an account have the same:
    1. Currency
    2. Payment method in the item
    3. Bank in the item
    4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
    You can also pay open items from different company codes together, as well as customer and vendor line items.
    Items in an account are not grouped together if you:
    1. Make payments separately per business area. This procedure entails separate payments being created per business area.
    2. Want to make individual payments
    Items in which a payment method is specified are not grouped with items in which no payment method is specified.
    You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
    In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

  • I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

  • SU01 user as reseller for more than one customer?

    Hi,
        We have a requirement where internet user act as a reseller and can place order for more than one customer in ISA R/3 edition. In the XCM configuration i have selected the user as R3_SU01UserStandalone and then followed the activity given in the SAP Document:
    http://help.sap.com/saphelp_crm40/helpdata/en/03/f6ce51eb8e4dbe82b9ca75e5c74fe6/frameset.htm
    Can anyone provide a solution what other steps i need to follow for this issue.
    Thanks
    Ankit

    Dear Shankar
    You have not specified whether the scenario is MTO or MTS.  If it is MTO, stock will be allocated against sale order as and when MFBF is done.  If it is MTS, then go to OMJJ, select Movement Type and give 292 and execute.  Now select "Field selection (Enjoy)" tab on your left and there maintain the option as Required Entry for the field "KDAUF" and save.
    Now go to MB1A, give movement type 292 with special stock W, plant and storage location and execute so that the system will ask for sold to party code.  Give the sold to party code and enter material code, stock to be reserved and save.
    If you see in MMBE now, those stocks will be displayed as special stock.
    thanks
    G. Lakshmipathi

  • [Fwd: Client accessing MBeanHome for more than one domain receives SecurityException]

    Fwd'ing to security newsgroup
    -------- Original Message --------
    Subject: Client accessing MBeanHome for more than one domain receives
    SecurityException
    Date: 4 Mar 2004 07:27:33 -0800
    From: Dinesh Bhat <[email protected]>
    Reply-To: Dinesh Bhat <[email protected]>
    Organization: BEA NEWS SITE
    Newsgroups: weblogic.developer.interest.management
    Hi,
    When a client accesses MBeans of more than one domains (Weblogic 8.1)
    that have
    different passwords, it receives a SecurityException. This occurs when
    the MBeanHome
    for each domain is looked up at initialization and reused for each
    request ( to
    access MBeans ). The security exception does not occur if the MBeanHome
    for each
    domain is looked up for each request. On initial review, this behavoir
    seems inconsistent.
    Looking up the MBeanHome for each request may introduce a significant
    overhead.
    I am not sure if concurrent lookups would also cause the same problem.
    I have read on another post that we can work around this problem by
    establishing
    a trust relationship between the servers, but this may not be feasible
    when one
    is monitoring a lot of servers and the overhead of configuration may be
    an issue.
    I have attached code that can reproduce the problem.
    Please advise on the correct approach.
    Thanks
    Dinesh Bhat
    Panacya Inc.
    import java.util.ArrayList;
    import java.util.Set;
    import java.util.HashMap;
    import java.util.Iterator;
    import java.util.Hashtable;
    import javax.management.MBeanServer;
    import javax.naming.Context;
    import weblogic.jndi.Environment;
    import weblogic.management.MBeanHome;
    * This class reproduces the Security Exception that is caused when a client tries to access
    * MBeans of more than one domain with different weblogic passwords. Here is the stacktrace of the
    * exception
    * java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
         at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
         at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:138)
         at weblogic.management.internal.AdminMBeanHomeImpl_811_WLStub.getDomainName(Unknown Source)
         at WLSecurityTest.getWeblogicInfo(WLSecurityTest.java:140)
         at WLSecurityTest.runTest(WLSecurityTest.java:75)
         at WLSecurityTest.<init>(WLSecurityTest.java:66)
         at WLSecurityTest.main(WLSecurityTest.java:51)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.intellij.rt.execution.application.AppMain.main(Unknown Source)
    Caused by: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators]
         at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
         at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:181)
         at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:814)
         at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:299)
         at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:920)
         at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:841)
         at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:222)
         at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:794)
         at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:570)
         at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
         at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    * Note: the exception is caused only when the MBeanHome for each domain is cached and used for subsequent
    * transactions. The exception does not occur if the MBeanHome for each domain is looked up for each transaction. This
    * would significant overhead in practice. Also the transactions across the various domains occurs serially, hence
    * the effect of concurrent lookups has to be tested.
    * Usage:
    * This class has been tested with weblogic 8.1
    * The class needs weblogic.jar in its classpath
    * One can specify the weblogic details as System properties. The properties need to be specified in
    * the following format:
    * wls.host.n, wls.userId.n, wls.password.n where n is the weblogix instance number. Also specify
    * the boolean system property reconnect.each.iteration to toggle between reconnecting or not reconnecting
    * for each iteration. When not reconnecting for each iteration, the MBeanHome is reused and the Security Exception
    * occurs.
    * Following is the example of system properties
    * -Dwls.host.0=localhost:7001 -Dwls.userId.0=weblogic -Dwls.password.0=weblogic
    * -Dwls.host.1=localhost:7011 -Dwls.userId.1=weblogic -Dwls.password.1=weblogic1
    * -Dwls.host.2=localhost:7021 -Dwls.userId.2=weblogic -Dwls.password.2=weblogic2
    * -Dreconnect.each.iteration=false
    public class WLSecurityTest
    ArrayList wlsDetailsList = new ArrayList();
    HashMap connectionMap = new HashMap();
    public static void main(String[] args)
    try
    WLSecurityTest wlSecurityTest = new WLSecurityTest();
    catch (Exception e)
    e.printStackTrace();
    * Constructor
    * @throws Exception
    public WLSecurityTest() throws Exception
    int noOfTries = 10;
    getWLSDetails();
    for( int i=0; i <= noOfTries; i++)
    runTest();
    * Runs the test
    private void runTest()
    for (int i = 0; i < wlsDetailsList.size(); i++)
    WLSDetails wlsDetails = (WLSDetails) wlsDetailsList.get(i);
    getWeblogicInfo(wlsDetails);
    * Get Weblogic details from System properties
    * @throws Exception
    private void getWLSDetails() throws Exception
    wlsDetailsList = new ArrayList();
    String hostKeyTmpl = "wls.host";
    String userIdKeyTmpl = "wls.userId";
    String passwordKeyTmpl = "wls.password";
    boolean done = false;
    for (int i = 0; !done; i++)
    WLSDetails wlsDetails = new WLSDetails();
    String hostKey = hostKeyTmpl + "." + Integer.toString(i);
    String userIdKey = userIdKeyTmpl + "." + Integer.toString(i);
    String passwordKey = passwordKeyTmpl + "." + Integer.toString(i);
    wlsDetails.hostName = System.getProperty(hostKey);
    done = (wlsDetails.hostName == null) || (wlsDetails.hostName.length() == 0);
    if (!done)
    wlsDetails.userId = System.getProperty(userIdKey);
    wlsDetails.password = System.getProperty(passwordKey);
    connect(wlsDetails);
    wlsDetailsList.add(wlsDetails);
    * Lookup the MBeanHome for the specified weblogic server
    * @param wlsDetails
    * @throws Exception
    public synchronized void connect(WLSecurityTest.WLSDetails wlsDetails) throws Exception
    Context ctx = null;
    MBeanHome mbHomeLocal = null;
    try
    Environment env = new Environment();
    env.setProviderUrl("t3://" + wlsDetails.hostName);
    env.setSecurityPrincipal(wlsDetails.userId);
    env.setSecurityCredentials(wlsDetails.password);
    Hashtable hashtable = env.getProperties();
    System.out.println(hashtable.toString());
    ctx = env.getInitialContext();
    wlsDetails._mBeanHome = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
    catch (Exception e)
    e.printStackTrace();
    * Gets weblogic information using MBeans
    * @param wlsDetails
    public synchronized void getWeblogicInfo(WLSDetails wlsDetails)
    try
    boolean reconnectEachIteration =
    Boolean.getBoolean("reconnect.each.iteration");
    if( (reconnectEachIteration) || ((wlsDetails._mBeanHome == null) && (!reconnectEachIteration) ))
    connect(wlsDetails);
    MBeanHome mbHomeLocal = wlsDetails._mBeanHome;
    String domainName = mbHomeLocal.getDomainName();
    Set allMBeans = mbHomeLocal.getAllMBeans();
    System.out.println("Size: " + allMBeans.size());
    Set clusterMBeans = mbHomeLocal.getMBeansByType("Cluster", domainName);
    System.out.println(clusterMBeans);
    MBeanServer mBeanServer = mbHomeLocal.getMBeanServer();
    catch (Exception ex)
    ex.printStackTrace();
    * Class that holds weblogic server details
    class WLSDetails
    String hostName = "";
    String userId = "";
    String password = "";
    MBeanHome _mBeanHome = null;

    If Server version is 61.
    Make user "system" password of all weblogic servers same.
    If Server version above 61(70,81)
    In the Security Advanced Settings un check generated credential and specify a common credentail for all the weblogic servers(domains).

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • Setting color codes for more than one photo at a time

    Is there any way to set color codes for more than one photo at a time?

    Hi John,
    I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
    As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
    For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
    To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
    I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
    My workflow is
    1. I first separate all images by event. I do that at the time of import.
    2. I do a fast pass rejecting all the obviously bad images
    3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
    4. I then select the images to be used by color code.
    5. Next I process the final images (crop develop etc) by collection.
    6. Last I output the set according to client requirement.
    If you have a better workflow, I am all ears.
    By the way, what is your photo specialty and where are you located?
    Jim

  • Editing 'Media Kind' for more than one song.

    Team,
    After downloading the newest update, I am no longer permitted to edit the "Media Kind" for more than one item at a time.  I need to be able to select an entire album at a time in order to efficiently update my library.  I sincerely appreciate your help.

    I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
    One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
    Thanks for any help on this.

  • Startup issue when having more than one database on machine

    Startup issue when having more than one database on machine:
    I’ve installed two databases.
    When I shutdown one of the database and try to start it up using
    Startup pfile=’…location..’;
    I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
    when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
    Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
    I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
    I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
    Anyone know how to get this working, i.e. starting and stopping DB without issues?
    Using oracle 11gR2 on Windows 7 64bit, all is working normal.
    Thanks,
    Ayman
    Edited by: aymanzone on Jun 15, 2011 9:27 AM

    aymanzone wrote:
    my oracle_sid is set to the name of one of my databases
    echo %oracle_sid%
    shows me the name of my first database.
    Still not working though.
    When I start the services of both databases using Services, I can connect and run queries from both of the database.
    Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
    Next ... from the command prompt:
    set oracle_sid=<Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
    From the same command prompt session or other ....
    set oracle_sid=<Other_Instance_Name>
    sqlplus sys as sysdba
    startup pfile='location of the respective db pfile'
    Edited by: Srikanth on Jun 16, 2011 12:27 AM

  • REQUEST RUNNING FOR MORE THAN ONE DAY - HOW INVESTIGATE ABOUT THIS

    Hi Everyone ...
    As you know when you submit any request throigh concurrent manager . The request completed normal or give warning or error .
    My probelm I have request running for more than one day .but I don't know right tool how invetigate about this issue .
    I checked alert log and database lock but nothing wierd .
    We are using 11.5.10.2 with 10.2.0.4 DB .
    Thanks in advance ...
    Edited by: user12010537 on 26/09/2010 05:39 ص
    Edited by: user12010537 on 26/09/2010 05:46 ص

    Hi,
    schavali wrote:
    Use MOS Doc 735119.1 (How to Find Database Session & Process Associated with a Concurrent Program Which is Currently Running) to determine the PID of the concurrent request, then follow the steps identified in MOS Doc 1058210.6 (How to Enable SQL_TRACE for Another Session or in MTS Using Oradebug)
    enable tha trace
    Re: enable tha trace
    Thanks,
    Hussein

  • MMBE for more than one Material

    Hi
    I
    need a report than allows us to view stock holding in alternative units of measure. MMBE is exactly what I need but it only allows us to view one material at a time. I need to be able to view many materials
    at one time and switch to the alternative unit. For example view material in stock by each's then convert to ton's
    Thanks for the help

    Hi,
    You can check material stock for more than one material by using transaction
    MB5B - By selecting date range for which stock need to be viewed.
    MB52 - For warehouse managed material
    Hope this will resolve your issue.
    Reagrds,
    Avinash.

Maybe you are looking for