One GR Label Against one GR needed

Hi All,
I am printing GR Label against GR .
My requirement is to print only one slip against each GR,
Whereas it's printing as per the qty entered .<b></b>
thanks,
sachin

Did anyone answer this question as I am having the exact same problem. It's not the GR slips that is the problem.....it is the number of LABELS that are printing.
On the Plant 1/Data Storage view of the material master, you can assign a label form per material item. Regardless of whether I set this to E1, E2, or E3 my labels still print based on BASE UNIT OF MEASURE. I want E3 to print based on ORDER UNIT.
For example, base unit equals FT. Alternate UOM is ROL. Conversion is 1 ROL = 500 FT. I have Order Unit of ROL assigned in Purchasing view of material master. (PO's order based on order unit and I receipt on order unit.) On the Plant 1/Data Storage view of the material master I have assigned the label form of E3. I have configuration set up for E3 as MSEG-BSTMG (I have also tried MSEG-BPMNG) but the labels ALWAYS print based on base unit of measure. This means that if I do a GR for 1 roll, I get 500 labels!
Help!
SP

Similar Messages

Can i use my creative cloud membership on laptop and desktop? Or is one membership needed for each device?

Can i use my creative cloud membership on laptop and desktop? Or is one membership needed for each device?

Yes you can!

My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?

My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?

If you can't update via wifi, you can use a friend's computer, or an Apple store will do it for you.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom
PS When you get your new computer.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Message was edited by: Texas Mac Man

Hi i haven't updated my iDVD seen 2005 and to get the new one i need 7.0.4 first and i downloaded it from the apple website and when i go into the updating process its says "An eligible iDVD application was not found in the location /Applications." why"

Hi i haven't updated my iDVD seen 2005 and to get the new one i need 7.0.4 first and i downloaded it from the apple website and when i go into the updating process its says "An eligible iDVD application was not found in the location /Applications." why

Because you need to buy iLife 08 or newer on DVD first. If you're using iDVD 05, you probably have a PowerPC Mac and can't use iLife 11.
(69573)

I have the f4500 all in one printer need to know how to mirror my image

i have the f4500 all in one printer need to know how to mirror the image in easy terms

Hi bbfoot,
If you are having issues setting up your HP printer on your Mavericks machine, you may find the following article helpful:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Regards,
- Brenden

I just got my MIDI to USB cable, fired up Garageband. I clicked the basic lessons, tried Play. But the lesson guy is playing. I'm the one who needs the practice.

I just got my MIDI to USB cable, fired up Garageband. I clicked the basic lessons, tried Play. But the lesson guy is playing. I'm the one who needs the practice, not him. Please help. I don't know what I'm doing.

G35Guy:
Well, if that's the case, you must have a different finish on yours than I have on mine. Either that or you are extrordinarily careful when using it. Mine literally scratches when using a microfibre cloth. I would really like to know whether yours is somehow different. It would really piss me of if some people got a good quality exterior that doesn't scratch and some of us got the opposite. Did you try holding your player under a light to see if there is anything. You may just be looking at it in bad lighting. I find it hard to believe, unless your unit has a different type of plastic cover, that it hasn't received any type of scratches. Can you take a picture of it's It probably seems as though I don't believe you. That's not the case. Its just that I was so careful not to scratch it last night and it got scratched anyway. I have read of similar experiences by others who have the Vision:M as well.
I wish I could return mine and get a different color, it really upsets me that a $300 item that is meant to be hand held and used heavily scratches this easily!! If anyone from creative is reading this, I would like to know what you plan to do about it! I didn't pay all of that money to have this player look like Sh*t when I am only using it the way it was intended and am being very careful at that!
John

I am getting a message that sys startup disk is almost full. I cleaned all my old emails out, archived old ones i needed and erased most files on the computer. I restarted but I'm still getting the message

I am getting a message that sys startup disk is almost full. I cleaned all my old emails out, archived old ones i needed and erased most files on the computer. I restarted but I'm still getting the message

Reindex Spotlight again.
http://support.apple.com/en-us/HT201716
Do not concern yourself about the backups. They will be deleted automatically if space is needed for other data:
http://support.apple.com/en-us/HT202301
Ciao.

Reg:I have GL a/c no one i need to split into 3 GL a/c no

I have GL a/c no one i need to split into 3 GL a/c no
1) First one is opening stock some restriction (like Business Transaction Sum total of all the business transaction for last period selected - (sum total of all debits - sum total of credits), when transaction type = RMWE + (sum total of all debits - sum total of credits), when transaction type = RMRU, RMWA, RMWL)
2) Second (First +1) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
3) Third (First +2) one is issue some restriction (Sum total of All debits - Sum total of All credits)
How to do please guide me
Regards,
jk

HI
1) First one is opening stock some restriction (like Business Transaction Sum total of all the business transaction for last period selected - (sum total of all debits - sum total of credits), when transaction type = RMWE + (sum total of all debits - sum total of credits), when transaction type = RMRU, RMWA, RMWL)
*Info Provider level -- through Transformations -- Formula If Then else for your 1st and normal* / OR Routine
Query -- RKF
2) Second (First +1) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
Info Provider Level -- Transformation -- ((Formula 1 ) + one is purchases some restriction (Sum total of All debits - Sum total of All credits)
Query -- RKF
3) Third (First +2) one is issue some restriction (Sum total of All debits - Sum total of All credits)
Info Provider Level -- Transformation -- ((Formula 1 + 2) one is purchases some restriction (Sum total of All debits - Sum total of All credits)
QUERY--Rkf
Hope it helps

How can I uninstall the cc programs I don't use without uninstalling the ones I need and the cs6 versions?

How can I uninstall the cc programs I don't use without uninstalling the ones I need and the cs6 versions?

Creative Cloud Help | Install, update, or uninstall apps is the official Adobe link... I do NOT know if you may select individual programs

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

Just bought an iMac. I want to be able to "remote in" to work. I've been told to download software from Microsoft site but can see there are several versions available. Can anybody advise which one I need. Thanks

You mean Microsoft Remote Desktop Connection Client for Mac

Does one really need 3G if they already have a cell phone

Does one really need an iPad with 3G if they allready have a cell phone.

It depends on the situation. For some people, they may either not need the iPad to connect to the Internet when away from WIFi, or have an Internet-capable smartphone and can tether the iPad to the phone to use the data connection and don't mind carrying both. For others, that's either not possible or not practical, or they wish to have the GPS only available in the 3G iPad, not the WiFi-only iPad.
If you're asking whether you need 3G in an iPad, we can't guess without having more information about your needs.
Regards.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

Is Aperture the one I need?

Hello,
I hear many good words about Aperture as easy to use photos editing software as well as good database for keeping a pictures library.
Most probably, I am not going to use it for editing pictures. However, I am looking for good program to keep organized library of shots I have.
I store all my original shots, which 99% are in RAW (CR2) on DVDs and external HDDs.
Currently I have slightly more than 350 000 pictures I would like to get to the library and simplify finding ones as well as organized better.
*What I want?*
I want the software to keep thumbnails only on local computer along with exif data and keywords (keywords defined to thumbnails linked to the pictures stored on external storages). When I click on thumbnail to open the original picture the software would respond with DVD/HDD number or name assigned and request to connect required media.
Is the Aperture able to work in this way?
If not, do you know the software that is able to do it?
Thank you,
Ramunas

To add to Coqui's informative answer:
I believe Aperture will do what you want and do it well.
In Aperture-speak, what you want to do is set up a referenced Library ("referenced" means the original files you import are stored wherever on your system you specify (including detachable media); "Library" refers to the database of information that Aperture maintains about all the files you import(including thumbnails)).
You need to find out what location information Aperture provides for referenced Masters (the "Master" is the originally imported file, prior to any development or editing (in Aperture-speak, one "adjusts" photos, one doesn't "edit" them -- and there is a reason for the distinction). I'm pretty sure Aperture can tell you on which drive a Master resides (your thumbnail and metadata live in the Library). I do not know if it can specify DVD. (If it does not, you could always use a keyword.)
I would start with this section of the User Manual (it is available on-line):
http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=5%26sec tion=16%26hash=apple_ref:doc:uid:Aperture-UserManual-91292BSR-1037584
Here is a snippet:
+_Working with Referenced Images_+
+Masters for images that you import as referenced images may reside in many different locations on your hard disk storage devices instead of in the single location of your main Aperture Library file. At times, you may need to determine which images are referenced images in order to readily locate them in the Finder. Aperture provides many ways to identify, search for, and move referenced images.+
When you use a referenced (rather than managed) Masters, you give yourself the ability to create both the +file storage structure+ as well as the +image storage structure+. Understanding this difference will be a key to successfully doing what you want. The +file storage structure+ is what you are asking about. The +image storage structure+ is what you create within your Library as you organize your images with Projects, Albums, Folders, Labels, Ratings, Keywords and more.
As a bonus, besides being an excellent digital asset management tool, Aperture is an excellent (state-of-the-art) raw converter and image developer.
Good luck.

One Report needs to connect to 20 different databases

Post Author: macgary
CA Forum: Data Connectivity and SQL
We have 20 identical databases - structurally - but differing in their regional data.
We have created some various reports that need to run against various databases in SQL Server. I would like to avoid having to create 20 variations of each report varying only in their database connections.
Does anyone have an idea of how I can pass the database name into the connection so I can make the one report work on any of my structurally similar databases?
Thanks,
Gary

Post Author: Hieu
CA Forum: Data Connectivity and SQL
Select "Set Datasource Location" under the Database menu.

Export workbook – One sheet needs to be run first before all sheets can be

I have “Init” sheet in a workbook, which sets the entered parameter values in DB context. Other worksheets query data based on the DB context value.
Now, I’m writing a DOS batch job to automatically export the workbook. The problem I’m facing is I can’t instruct Discoverer to run the “Init” sheet first.
So far I tried the following commands
c:\oracle\BIToolsHome_1\bin\dis51usr.exe /connect test#/dev@dec_db /opendb " Account.DIS" /Sheet Init,Test_1,Test_2 /parameter Acct_ID 0113 /parameter MV 40494801 /batch /export HTML "ELT_report_%today_date%.xls"
c:\oracle\BIToolsHome_1\bin\dis51usr.exe /connect test#/dev@dec_db /opendb " Account.DIS" /Sheet Init /Sheet ALL /parameter Acct_ID 0113 /parameter MV 40494801 /batch /export HTML "ELT_report_%today_date%.xls"

Deepakanu.
1. I don't have the command in front of me, but you have to run each command separately for each worksheet if that's what you need to do.
So, your first run would be something like:
c:\oracle\BIToolsHome_1\bin\dis51usr.exe /connect test#/dev@dec_db /opendb "Account.DIS" /Sheet Init /parameter Acct_ID 0113 /parameter MV 40494801 /batch /export HTML "ELT_report_%today_date%.xls"
while your second ... all runs would be to label each worksheet separately OR if you used the ALL, it would re-run Init again and may screw you up.
Sounds like you'll have to specify each separately if you're dependent on the order.
2. Alternatively, if you just used the ALL version and that's it (ie: put in /Sheet ALL by itself), then I thought that the first worksheet in a workbook (farthest left) would be the one to run first. If this is correct, then maybe this would work if you make sure of the worksheet ordering in the workbook.
Russ

One GR Label Against one GR needed

Similar Messages

Maybe you are looking for