One gwia in unknown status

I still have one gwia that is unknown status in monitor, other 5 gwias that
are configured the same are being monitored. What else can I check ?

Tim,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Internal Order: Interface trip stop: ERROR: unknown status = ''

Hello,
I have completed the setups for Internal orders:(the two orgs are within the same Operating unit, transfer method: direct)
I am able to
1. Create internal requisition
2. Import Order
3. Book, Pick Release and Submit ship confirm
Now, the interface trip stop ( the inventory interface part) The status changes to shipped in Shipping transactions.
The log file does not have an explicit error message. Posting truncated error message below. In more than one place, the following
vague error messages appear.
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
"Calling program unit WSH_DSNO.SUBMIT_TRIP_STOP
Entering WSH_DSNO.SUBMIT_TRIP_STOP () (09/27/2006 09:11:09 PM)
P_TRIP_STOP_ID ==> 4677
PROCESSING DSNO IN TRIP STOP 4677
RLM INSTALLED: YES
Calling program unit RLM_TPA_SV.UPDATECUMKEY
CHECKING EDI INSTALLATION STATUS
EDI INSTALLED: YES
DSNO PROFILE: ENABLED
No Eligible Delivery for the DSNO
Terminating program
INTERFACETRIPSTOP: RESULT OF DSNO SUBMISSION FOR STOP_ID 4677 =
Entering WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (WSHDDSHB.pls 115.310.11510.3) (09/27/2006 09:11:10 PM)
p_num_stops ==> 1
p_batch_id ==> is NULL
X_MASTER_STATUS ==> NORMAL
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
Exiting WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (09/27/2006 09:11:10 PM, .01 seconds)
l_api_completion_status ==> INTERFACED
l_previous_interface ==> TRUE
Your help is greatly appreciated.
Thank You,
Somnath Subramanyam

Hi somnath,
U have enabled the DSNO (departure Ship notice outbound) in the profile option
ECE_DSNO_ENABLED = yes. (through your log file)
You go to e-commerce gateway responsibility --> go to setup --> profile option --> query this profile option and Change to no and then try again.
Regards,
Prasad

Phones showing unknown status but check physically the phones are registered ok

Hi,
Would like to know the following,
The publisher and subscriber both show the phones of one particular cluster showing all the phones in unknown status but if we checked them physically the phones are registered well and able to make calls and received calls
Both of the version are 7.1
Thanks
Alan

Aditya
Thanks for your response.
There are 5 nodes in the cluster ( 1Pub + 4Sub).
Phones are registered with subscriber.
If I login the subscriber web page, the status showing registered. But if I login Publisher web page the status showing unknown. Phones are Physically registered. I restarted the RIS service but no use. DB replication status showing 2.
Thanks
Venkkatesh.L

Intermittant "Unknown Status" for POA and MTA

Hello,
I'm getting intermittent "Unknown Status" in my GroupWise monitor for both my MTA and POA for a certain location. When I check the console for these two agents, they look just fine...
The box running GroupWise monitor is on the same physical location as the MTA and POA that is having the issue.
All of my other MTA and POA's at our primary remote location are just fine.
I've already verified that the SNMP strings are correct - they are identical to the working MTAs and POAs...
If there isn't a way to repair this issue, could someone please come up with a way from preventing "Unknown Status" messages from making it to my inbox? I've already tweaked the "Minimum Threshold level for notiifcation" to critical, yet it continues to "SPAM" me with "Unknown Status" messages...
If there isn't a way to "tune it out" of monitor, then I guess I'll just go ahead and make a rule in my GroupWise client to "move to trash" any "unknown status" messages... At least that will allow me to see any notifications of real problems...
Thanks! :)

wspotkaeff,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Unknown Status: the dependency service or group failed to start AFTER upgrading to WIN10

EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset

EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset

How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

2540 Battery Unknown status

Hi all,
Did anyone encounter STK 2540 Battery becomes unknown status? I don't know why the last learn cycle is 1970 year! Placing a call and tried to change with a new Battery, but it becomes Unknown too after charging about 10-15min. Anyone has a passcode to enter engineer mode console to reset the time?
Battery Tray.85.Battery.A has expired.
Automatic Age Reset: False
Availability: Unknown
Battery Age: 10803 Days
Battery Type: Dual Individual FRU
Caption: Battery
Description: Cache Battery
Element Name: Tray.85.Battery.A
Element Status: Unknown
Enabled State: Unknown
Last Learn Cycle: Thu Jan 01 08:00:00 CST 1970
Learn Interval (Weeks): 13
Life Remaining: 0 Days
Name: Tray.85.Battery.A
Next Learn Cycle: Fri Apr 21 13:59:50 CST 2000
Physical ID: SUN.371-2482-01.1T72304407PS
Status: Unknown

hi
i have got a new battery from SUN support, but the status is still Unknown, do you know how long does it need to be fully charged?
== majorEventLog.txt ==
Date/Time: Thu Jan 15 19:26:55 HKT 2009
Sequence number: 3086
Event type: 211C
Event category: Notification
Priority: Informational
Description: Cache battery is charging
Event specific codes: 0/0/0
Component type: Battery
Component location: tray85
Logged by: Controller in slot B
=====
== current status ==
Automatic Age Reset: False
Availability: Unknown
Battery Age: 14230 Days
Battery Type: Dual Individual FRU
Caption: Battery
Description: Cache Battery
Element Name: Tray.85.Battery.B
Element Status: Unknown
Enabled State: Unknown
Last Learn Cycle: Wed Jan 14 15:01:52 HKT 2009
Learn Interval (Weeks): 13
Life Remaining: 0 Days
Name: Tray.85.Battery.B
Next Learn Cycle: Fri Apr 10 13:59:50 HKT 2009
Physical ID: SUN.371-2482-01.SY82593656SA
Status: Unknown

MTA Unknown Status - Not Listening

Recently we installed GroupWise monitor on the same server as the MTA.
When I go to view the monitor webpage all the components (pos, gwia, webacc) all show green and happy, but the MTA shows the "Not Listening" status. Here's the fun part.
When monitoring the MTA using the MTA console everything looks fine.
However, when you click on the "Not Listening" link in GroupWise monitor it shows the MTA's address as the old Netware server's address that we migrated from. Hence the "Not Listening" status. Not sure why the old address is showing. I've looked all through the startup files for the post offices, MTA, GWIA and Webacc for anything that might reference the old MTA's ip address, but couldn't find anything.
It's really not a big deal since we can monitor it via the MTA's console, but it would be nice to have it available in the GroupWise monitor page so we can set traps, notifications, etc, etc.
Is there anyway I can fix this?

I will attempt to make a backup of the main DB and then rebuild it and then the POAs afterwards and see if that fixes anything. On another note... do you think that bad link information in the databases could be causing the post offices and webmail agents to just randomly quit once or twice daily. We've been having this issue since we upgraded to GW8. It may be another issue completely. Just curious what your thoughts were.
Originally Posted by aaronm04
I think this is your problem. It appears that somewhere in one of your GW domain databases, the old address still exists. If your POA won't connect w/o that switch, then the bad IP info is coming from the GW DB. If you find that and fix it, I would think GWMonitor would follow suit.
Is this your primary domain? Is it the parent of the GWMonitor object/app? If you have multiple domains, connect ConsoleOne to each one and verify the IP of the object in the MTA (not domain) properties. You might even consider a rebuild of the domain. If the child POs still don't connect w/o that switch (after you've verified the correct address in the MTA), you might consider rebuilding them too. They either aren't getting the updated info from the domain or the domain doesn't have the right info to begin with.
Report back what you find.
Aaron

One report to check status of project/wbs(TECO/REL)+ available budget

Dear All,
Please advice. Is there any report (one for all ) which can show Status of project/wbs + available budget of a project. I tried cns43, cn41 and report s_alr. But it shows in different tcode/report. Hopefully there is a standard report that can show these in one report.
Many thanks in advance.
Nies

CN41 shows the Current Budget and not Original Budget.
If Available Budget in your terms means difference between Current Budget and Actual, you can include a column 'Difference' from menu.
Select the Column Budget 1st, Menu Edit>Comparison> Choose Actual Cost.
The output shows the difference and percentage. Problem now is you can't view the status.I can't think of anything standard which exactly gives the ouput columns you are expecting.
Regards
Sreenivas

Multiple SMTP ports on one GWIA??

We currently are running SMTP on port 25 in GWIA and I have no intention of changing that, for obvious reasons. However, one of the big residential network providers in the area (AT&T/Bellsouth) has a policy of blocking traffic to port 25 on their network to anything but their own server, at least for residential accounts. Due to some of what I'll call legacy issues, we have a good number of users who are just using POP3/IMAP and want to be able to check their mail from home.
What I'd really like to do is to make another SMTP port available, say 26, which would get around Bellsouth's block. (I know that should work; I also have Bellsouth at home and use port 26 with another domain provider that I use personally.) In the GWIA properties on GroupWise > Network Address, however, it looks like I can only set one SMTP port. In this case, it would even work if the second port required SSL, but while separate ports seem to be available for POP, IMAP and LDAP they aren't available for SMTP. I've been telling users to just use the GWWA we have set up, but some of the big shots in the company want to use browsers on tablets that don't like the GWWA, so it'd be really nice if I could just get them to work with SMTP even when they're at home and on Bellsouth.
Any suggestions for how I can get GWIA to listen for SMTP on two ports, 25 and some other port, whether or not that other port requires SSL or not? Is there some manual config file I can override the default ConsoleOne settings with? If there are any recommended tricks I'd love to hear 'em... thanks in advance!
topher

In short, you can't - it is an enhancement request that I and others
have had for some time...
On the other hand if you create a second GWIA, change that so that it
listens on 587 (SMTP Submission Port) with SSL Required and then have
it relay out via your other GWIA you will achieve what you want.
However, please PLEASE ensure that the POP, IMAP and SMTP all have the
SSL set to required so that your users do not send user names and
passwords in clear
Thanks
On Wed, 30 Nov 2011 18:06:01 GMT, toforama
<[email protected]> wrote:
>
>We currently are running SMTP on port 25 in GWIA and I have no intention
>of changing that, for obvious reasons. However, one of the big
>residential network providers in the area (AT&T/Bellsouth) has a policy
>of blocking traffic to port 25 on their network to anything but their
>own server, at least for residential accounts. Due to some of what I'll
>call legacy issues, we have a good number of users who are just using
>POP3/IMAP and want to be able to check their mail from home.
>
>What I'd really like to do is to make another SMTP port available, say
>26, which would get around Bellsouth's block. (I know that should work;
>I also have Bellsouth at home and use port 26 with another domain
>provider that I use personally.) In the GWIA properties on GroupWise >
>Network Address, however, it looks like I can only set one SMTP port.
>In this case, it would even work if the second port required SSL, but
>while separate ports seem to be available for POP, IMAP and LDAP they
>aren't available for SMTP. I've been telling users to just use the GWWA
>we have set up, but some of the big shots in the company want to use
>browsers on tablets that don't like the GWWA, so it'd be really nice if
>I could just get them to work with SMTP even when they're at home and on
>Bellsouth.
>
>Any suggestions for how I can get GWIA to listen for SMTP on two ports,
>25 and some other port, whether or not that other port requires SSL or
>not? Is there some manual config file I can override the default
>ConsoleOne settings with? If there are any recommended tricks I'd love
>to hear 'em... thanks in advance!
>
>topher

Final confirm one operation sets order status CNF

Here is the issue I am having.
I have PM Order with multiple operations. If I confirm any one operation with 'Final confirmation' checked then Order status changes to CNF and I am unable to do any further confirmation on the order.
I am expecting the order status to be changed to CNF only after ALL the operations have a CNF status, but it is not behaving like that. I searched oss and could not find any relevant notes.
Any suggestions greatly appreciated.
Thanks,
PJ

Philip
Some questions:
- Do all operation have time
- Do all operations have the same Operation Control Key
- Are you using any batch programs to update the order/confirmation
- How are the confirmations created
- Are there any user-exits/BADIs being used on the confirmations
PeteA

Can we assign one profile to two status of an object

Dear All,
can we assign one profile to more then one status of an status objects ?
Regards
Bhuwan

Dear bhuwan,
I think it is impossible to assign a profile to two statuses.

Workflow Analyzer shows unknown status for workflows and trace disabled

Some servers monitored by SCOM are affected by the issue where I cannot trace workflows with Analyzer. Statuses are showing as unknown, trace is disabled. If an agent cache is flushed and health service is restarted it works for a first session showing only
some IIS workflows.
Can it be fixed somehow?
Guntars Svilpe

<ProbeActionModuleType ID="Microsoft.SystemCenter.GetWorkflowsReportProbe" Comment="requests list of running or failed workflows for management group/instance" Accessibility="Public" Batching="false" PassThrough="false">
<Configuration><xsd:element name="ManagementGroupId" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" /><xsd:element name="ManagedEntityId" type="xsd:string" minOccurs="0" maxOccurs="1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
/><xsd:element name="Status" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:simpleType><xsd:restriction base="xsd:string"><xsd:enumeration value="Failed" /><xsd:enumeration value="Running" /></xsd:restriction></xsd:simpleType></xsd:element></Configuration>
<ModuleImplementation Isolation="Any">
<Native>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID>
</Native>
</ModuleImplementation>
<OutputType>System!System.BaseData</OutputType>
<InputType>System!System.BaseData</InputType>
</ProbeActionModuleType>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID> Is it a black box?
Guntars Svilpe

ORA-12514 and UNKNOWN status

Hi,
on 10.2.0.3 on Win can not connect to DB by :
sqlplus user/password@MYDB
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
lsnrctl status gives :
Service "MyDB.server.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service..
But tnsping MYDB is OK.
I can connect with :
set ORACLE_SID=MYDB
sqlplus / as sysdba
Any idea ?
Thank you.

user10274093 wrote:
Realy thank you.
Here they are :
lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 21-AUG-2013 17:18:19
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.29.116.4)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production
Start Date                21-AUG-2013 16:34:39
Uptime                    0 days 0 hr. 43 min. 40 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   D:\oracle\network\admin\listener.ora
Listener Log File         D:\oracle\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.39.116.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "MYDB.SERVERDOMAIN.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.39.116.4)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "MYDB.serverdomaine.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
The command completed successfully
Since every connection request to the listener gets logged, listener.log file will contain a line with 12514 as status code.
T21-AOÛT -2013 17:18:19 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=user))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870080)) * status * 0
21-AOÛT -2013 17:20:09 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=user))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870080)) * services * 0
21-AOÛT -2013 17:23:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=MYDB)(CID=(PROGRAM=D:\oracle\bin\sqlplus.exe)(HOST=SERVER)(USER=_syadministrator))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.39.116.4)(PORT=3033)) * establish * MYDB * 12514
TNS-12514: TNS : listener does not currently know of service requested in connect descriptor
connection request was for "MYDB" service but listener only know about service name below
>Service "MYDB.serverdomaine.LOCAL" has 1 instance(s).
which is NOT named "MYDB"!
so either change listener or change requested Service name so they match each other!

Unknown status indictaor

i have a yellow world like status indicator and i cant find anywhere to tell me wot it is could some one help me pleaseeee

Likely a WAP or Browser push message.
Open your main messages folder > press the Menu key > View Folders, scroll the WAP or Browser messages and see if any are present, read or delete them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

One gwia in unknown status

Similar Messages

Maybe you are looking for