One HD and two systems?

Does anyone have both Snow Leopard and Lion on the same hard disk but on different partitions? Is it doable? On my old G4 I have Leopard on one partition and MacOs 9 on another.

Yup. 
One thing to be careful of, though:  If you need to change partition sizes, you can shrink your Lion partition, but you can't expand it (at least not now, via Disk Utility).
If you encrypt your Lion partition via File Vault 2, you can no longer alter the size of any other partitions on the same disk.

Similar Messages

  • One sender and two receiver

    Hi All,
    I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
    Thanks
    Michael

    Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
    /people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service

  • I have one Iphone and two computers. How do i get my ringtones off of one computer and onto the other?, I have one Iphone and two computers. How do i get my ringtones off of one computer and onto the other?

    I have one Iphone, and two computers. They both have different purchases on them. One is older than the other. and one was my moms. How do i get the ringtones off of my computer and onto my moms computer to use all of them on my Iphone?

    Copy them to a cd/dvd/flash drive/external drive/etc,  then to the other computer.
    E-mail them.

  • In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
    The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

  • POSDM Diff Between : One Step and Two Step Processing Tasks

    Hi All,
    Can you pl give some points on difference between "One Step and Two Step Processing Tasks in POSDM ??
    Thanks!!

    Please consult the SAP Note 980272 on the service marketplace. It gives a detailed description of the difference.

  • We have one iPod and two iPhones; we have not been able to transfer our music from Ipod to IPhones, via iTunes, please assist?

    We have one iPod and two iPhones; we have been unable to transfer our music from the Ipod via iTunes to the iPhones, please assist.

    did you right click the ipod/iphone and click transfer purchases

  • Trade-off between the one-arm and two-arm WAE designs

    We are configuring a WAE (model 512) for a branch office and I was wondering if someone could please tell me the trade-off between the one-arm and two-arm WAE designs..
    thanks..
    greg..

    if you are using WCCP then the WAE becomes the client withing the servcie groups 61, 62. In order to accelerate both vlans then apply the ip redirect 61 in on the client vlan ineterfaces to the one interface.
    If inline, you can use both 2 port groups for each client interface or trunk all to a single inetrface and configure which vlans you would like to accelerate.
    Now in terms of of using both GE inetrfaces, I would have to check. A topology diagram would help

  • Hash with one key and two values

    Hello,
    In java can i have a hash or similar data type than can have one value and two keys?
    thanks,
    jd

    Eh, I'd avoid arrays, personally.
    The reason why is that in my experience, once you start doing things like this, you end up adding an arbitrary number of additional elements for each key. Fixed-size arrays would be a pain.
    If you don't want/need to create an object that encapsulates the two values, why not just use a java.util.Collection as the value in the hash? The Collection -- say, a LinkedList (you decide) -- would hold the two values you want associated with the key.

  • How do I use icloud with one mac and two iphones

    I have just got an iPhone 5.
    My wife and I share a macbook pro
    My wife has an iphone 4s and uses iCloud to sync photos etc.
    I want to use iCloud too, so.....how do we use iCloud so:
    - when we each take photos on our phones they sync to our mac
    - our contacts sync (can we set preferences on our individual phones so we only get the contacts we want on our iPhones from a shared address book on the mac)
    - we have individual calendars
    Any advice much appreciated.
    Thank you.

    If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account.  Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On.  If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group.  Then turn iCloud syncing for Contacts to on on all your devices.  To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view.  When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
    If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud.  If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
    The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account.  This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones.  And by using contact groups you can filter your view to just your own contacts.

  • ONE DOC AND TWO IR DOC

    Hi Friend,
    We have one issue in production system
    This issue is generated for consignemnet process
    Threre is only one GI document and for that threre are two IR documents are generated
    How this is happen? How to fix this issue?
    Thank You!!!
    Shrinivas

    i
    is the 2nd one is get generated automatically
    ten plz check why it is so
    if u have done entry twice then go and cancel the doc
    regards
    KI

  • One .mac and two Gmails = mess (10.5)

    I had my Tiger mail set up with a .mac IMAP account and two Gmail POP accounts. After upgrading (archive & install) it all seemed OK but I couldn't delete anything from either Gmail account; I'd get an error saying it couldn't be moved to mailbox whatever. OK, I thought I'd switch those Gmail accounts to IMAP too. One of them works OK, but on the other I cannot authenticate (yes yes I checked all the names and passwords), so I had to change it back to POP because I kinda need it, and POP credentials work despite being identical (and yeah I enabled IMAP on both accounts).
    Not real thrilled with the new Mail.app so far...

    If you want to share the same photo stream so both your photos sync to your mac via iCloud you'll have to share the same primary iCloud account.  Set this up in Settings>iCloud on both phones using the same Apple ID, and in System Preferences>iCloud on your Mac; then turn photo Stream to On.  If you want to also using iCloud to sync with your shared Address Book on your Mac, but keep your contacts separate, you'll have to create two contact groups in Address Book on your Mac - one for each of you - and drag copies of the appropriate contacts into each group.  Then turn iCloud syncing for Contacts to on on all your devices.  To view just your own contacts you'll have to open the Contacts app on each of your phones, tap Groups, then check only your own contact group to view.  When you add contacts on either phone, you'll have to add these contacts to the appropriate groups in Address Book on your Mac as you can't manage contact groups on your phone.
    If you want to maintain your own calendars, the easiest thing to do is not to syncing your calendar with iCloud.  If you did, your calendars would be merged in iCal on your Mac and the merged calendar would appear on both phones.
    The important thing to know is that when you share an iCloud account any data you sync with the account will be merged and appear on all devices sharing the account.  This will happen with your contacts too, but since you already have a shared Address Book on your Mac, it will stay up to date as you change/add/delete contacts on your phones.  And by using contact groups you can filter your view to just your own contacts.

  • Is a one server with two system IDs configuration valid when using MSCS

    As the last step in my upgrade from BW30b to BI70 I need to introduce Java.
    My newly upgraded ABAP BI70 system is running on a Microsoft Cluster and it was my intention to add Java as a separate system(SID).  When doing this it appeared I would be able to add the two systems to the same cluster group by selecting "Support of multiple SAP systems in one MSCS cluster" but this resulted in errors and I have found note 967123 which tells me not to chose this option when using MSCS.
    It appears my options are a separate server all together or an ABAP+Java install which limits our upgrade options on each stack.
    If anyone has found a work around for this I would be very interested.
    Thank you

    Hi Helmut,
    Not sure how the D-Link works, but it looks like it has Wireless 802 also from the specs, so the Ethernet & Wireless would each have an IP & different MAC addies.
    I always thought one Mac address can have only one IP address.
    Nope, you can prove this to yourself on your Mac, In Network>Show:>Network Port Configurations, highlight say Ethernet, Copy, give that another IP Manually if you wish...

  • One instance and two databases?

    Hello, I've installed oracle database on my server. I've read a lot of documentation to learn the basic concepts.
    Ok, I have a question. I have read that one instance only can manage ONE database. Is it true? If it's true, how on earth I can create two database? for example, I want to create database-one and database-two.
    I would create these with CREATE DATABASE command. How does Instance know if I want to access to database-one or database-two. How I indicate it in initilitation parameter file of my instance?
    In sumary, Can one instance works with two databases?

    Look at the following output. If I do not set my ORACLE_SID variable, the 9.2.0.7 client connects to the 9.2.0.7 database instance. If I set my ORACLE_SID , the same 9.2.0.7 client now connects to the 10.2.0.1 database (the database specified in the ORACLE_SID variable).
    C:\>set ORACLE_SID=
    C:\>sqlplus kkishore/kkishore
    SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:27:55 2006
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.7.0 - Production
    SQL> exit
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.7.0 - Production
    C:\>set ORACLE_SID=ORA10GR2
    C:\>sqlplus kkishore/kkishore
    SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:29:31 2006
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL> disconnect
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>Message was edited by:
    Kamal Kishore

  • I have one IMac and two Ipod and two ipad for the hole familie. We had all people a separatly ITunes Account. The ITunes said this Imac is for 90 Days closed. Why ? we have only one Imac!

    I have e big problem with my ITunes and my mobile devices. Two Ipod Touch  and two IPad.
    My son and my wive und myself have e seperatly ITunes Account. My Account ist with credit card my son and my wive only with Itunes cards.
    All devices are protected by my Mac with other accounts in each case and are administered. Now the Imac has switched off the tone and said one cannot div. Accounts join! Nevertheless, this cannot be. This would be a complete nonsense! What can i do that all Devies woks?
    Thanks for your help

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • One dimension and two fact report in OBIEE

    Dear All,
    I have one dimension "region" and two facts (Sales value & Gross margin%). Gross margin% is logical column which has been derived from two other facts column and it's value is in range from Zero to 100.
    Now, I want to generate below report. For each gross margin% range of 5%, I want to sum the sales value for each region. Please assist (Just a small snapshot of report)
    GM%     Region_1     Region_2
    <0     254      619
    0-0.05     524      799
    Thanks & Regards,
    [email protected]

    Hi,
    Create Bins for Gross% fact column and go to pivot view place Gross% fact column into rows area,region column into columns section and sales value into measures section
    hope it works

Maybe you are looking for