One Horizontal Toolbar Canvas and Multiple Windows

I have a form with multiple windows and canvases. All our forms have ONE horizontal toolbar canvas. We like to display this horizontal toolbar canvas on every window. Is there way to do this? We get FRM-30162, when we assign the horizontal toolbar canvas to any window other than the primary window of the horizontal toolbar canvas.
Happy New Year!
Thanks

Hi,
we handled that with the following:
1.- create a DUMMY window with the following properties
title: null
Primary Canvas: null
Horizontal toolbar canvas: null
2.- On the Toolbar canvas properties:
Window : DUMMY
3.- On Form properties:
form Horizontal toolbar canvas : "your toolbar canvas"
This sets the toolbar on top and indepedent of your windows.
Happy new year!!!
Hugo.

Similar Messages

Can't get Canvas and Timeline Windows to Show

Not sure what happened but Canvas and Timeline windows won't show. Pls help!

I'm completely new to Final Cut Pro (I just got Studio), and I've been having the same exact problem: I open up Final Cut Pro, open a new project, and I only get the Browser and Viewer windows. I go to Window/Arrange, and I still can't open up the Timeline or the Canvas. I would just double click on a Sequence, but I don't know what the difference is between a sequence and a clip.
Just to help you guys out, I'm working on the "Into the Blue" thing from the Training DVD; I had started working on it, but quit Final cut, and when I double clicked on the Project (I Saved it to Mac HD) to open it, I only get the Browser and Viewer. Please forgive my ignorance, but help! I'm panicking because I don't know what to do!
17-inch Powerbook G4 Mac OS X (10.4.5)

TS3367 We have one Apple I'd and multiple devices, and are not getting FaceTime to work between the devices on the same id

We have one apple I'd with multiple devices and FaceTime will not work between them?

Put separate email addresses (free gmail) on each device.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Lost Canvas and Timeline windows and can't get them back

I'm new to Apple after many years with Windows. So I'm feeling my way around a bit.
Anyway, I just started using my new FCE, imported my first 60 minutes of home videos, and was getting ready to edit them when I lost 2 of the 4 editing windows - Canvas and Timeline. So I went to the Window command drop down and noticed both Canvas and Timeline were "greyed out". Browser and Viewer were not greyed out and both are working properly.
Any help would be greatly appreciated.
This is most frustrating. (I thought only Windows applications had frustrations!)
IMac6 Mac OS X (10.4.9) 24 inch

Hello...
As Da Nam suggested... double-click on the sequence icon in the browser to open it... this will open the timeline and canvas windows.
If it's another problem.. try pressing control+U to restore to default window lay-out.
J

Problem refreshing canvas when multiple windows and canvasses.

Ok I Have a form that has 2 windows and 2 canvases.
They both get populated on When new Forms instance trigger with a parameter i pass in from teh previous form.
On entering the form if the parameter is set (passed in by the form before) it should query the blocks on canvas 1 and display the second canvas/window via a seperate package of "canvas.open" which is a package to open and populate the second canvas which is a tree.
If this code is fired on a key next item or a button press its fine. but not where it is on when new form instance trigger. The canvas.open simply stops on a synchronize early on. If i remove a sync then the second canvas never appears.
You can see a commented out pause. If this is included then it all works fine. If i use a synchronize instead of the pause it doesnt even reach the canvas.open (i used messages on status to work this out)
So my question is how can i get a synchronize to work as i assume this is whats missing?
Any help much appreciated, Im sorry if i have not explained very well.
IF :PARAMETER.I IS NOT NULL THEN
               Go_Block('B1');
               Execute_Query(no_validate);
               Go_Block('B2');
               Execute_Query(no_validate);
--PAUSE;
               canvas.Open(:PARAMETER.I);
END IF;

What happens if you do a
IF :PARAMETER.I IS NOT NULL THEN
               Go_Block('B1');
               Execute_Query(no_validate);
SYNCHRONIZE;
               Go_Block('B2');
               Execute_Query(no_validate);
SYNCHRONIZE;
               canvas.Open(:PARAMETER.I);
END IF;

How to use one I-tunes library with multiple windows users (family) on 1 pc

On our family pc we log in with different accounts. We want to use I-Tunes but all have the same library. I tried to create a library not in the users directory, but in the All Users folder that is accessible for everyone. However, when I import the music in the library for one user and set the same location for another user, I-tunes does not recognize the library. So everyone has to create it's own library.
What are the best practices to overcome this?

Keep in mind that what you have done now is you have multiple iTunes libraries accessing the same media folder. Meaning, that each account can have their own ratings, playlists, etc. but more importantly, each account does NOT know what the other account does, so if your daughter adds a CD to her account, it will go into the shared folder, but it will NOT automatically go into your wife's iTunes library. She would have to add it manually. Likewise, if one account deletes music from their library and tells iTunes to remove it to the trash, the other accounts will not know and iTunes will still try to access the file from the shared location even though the file is now trashed.
Each account has their own database files (.itl files in the iTunes folder) which stores this stuff.
If you want to have everyone use the exact same library which means the same ratings, playlists, etc. then you need to move the database files into that same location and set each iTunes account to read the same data.
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
Patrick

One Oracle Application Server and multiple OC4J Instances

While we are getting new server (for development) we have to set-up a Development and Production enviroment for our project (dont have previous OAS installation) but on the same machine.
So, is a good option to have One OAS INstallation (Ora Home) and then create multiple OC4J instances, one for each environment (Development, QA and Production)?, is it possible? How to manage deployments between OC4J instances, simulating different contexts if they are in the same server and under the same HTTP Server? Will be there conflicts?

Hi,
you can do this and OracleAs will manage the different instances. The deployment can be done with Enterprise Manager in which case you select the OC4J instance first before deploying. If deploying from JDeveloper, you can specify the OC4J instance when creating the named connection
Frank

One main apple account and multiple icloud accounts

Help please! We have one main apple account/ID that we use for purchases. I have set up seperate iCloud accounts for my 3 kids so that our information (mail, contacts, etc) is kept seperate. I have enabled the restrictions on their iPods also.
It looked like I had everything separated correctly, they had their own contact book, their own email account, and were (hopefully) able to only iMessage/Facetime with the contacts that are loaded in their phone. I went to test this by going to iMessage and started to type one of the pre-loaded contacts in their phone and all my personal contacts showed up. I do not want my kids accidentlly iMessaging my contacts. How are these getting pulled in? I can not find in settings anywhere where to turn this off. My contacts are not listed in their contact book on their iPod?
Thank you so much for your help!

My kids favorite games are mindcraft and flappy bird and when I mentioned restoring their phone they were a bit worried. Looks like I might need some quiet time to read that document over and see if their is a way to save their info in the games. Looks like there might be? If I can figure that out then I will for sure restore their phones. In the meantime I am telling them to be super careful not to send mass text to my contacts Thank you for your help!

On one mac, is it possible for just one user to download and use windows, or will it force all the users to use windows?

I want to download windows on the guest identity, so that I can play pc games (which only work on windows), but I dont want to have to use windows on my regular user identity. Does anyone know if it will only download for the one user?

no user is forced to use Windows.

Cross platform upgrade question between Photoshop CS5/CS6 and multiple Windows/Mac computers

Hello,
I'm currently using a Windows laptop and PC running Photoshop CS5 from a Student license I got in college. I am considering moving to an Apple laptop so I was looking at the cross platform update question on the forum that led me here: Order product | Platform, language swap
It's not really clear if I will be eligible for the upgrade, and Adobe support chat sent me to the forum, and that page sends me back to where I started to see if I am eligible. I would prefer to purchase the upgrade outright, rather than pay for the new monthly subscription model.
If I am eligible for a swap/upgrade to Apple CS6, will I still be able to use CS5 on my Windows PC?
Thanks.

I don't have a definitive answer, but I have a feeling that a student teacher version is not eligible for an upgrade discount. You own the CS5 perpetual license, and can install it on two computers at the same time as CS6, CC etc. That will be the case in perpetuity. (not sure why I didn't just type 'forever' back there, or alert the cliche police 'Going forward')
Photoshop CS6 Extended will cost you just shy of US$1600 according to this Amazon page The non extended version does not give you the 3D tools, and Photoshop CC comes as the full extended version as standard. If you got the Photoshop / Lightroom Photography plan at a mere $10 a month, the price of CS6 would keep you subscribed for > three years. Photoshop CC has a lot of wonderful features CS6 does not have, and will never have, and CC will be be constantly updated 'in perpetuity'. ;-) $10 a month! Heck, what's not to like about that?!!!

Panel Object xy coordinates and Multiple window list in task bar

Two questions...
I recently had to rearange panel objects to programatically display them. They were not at the origin, and had to futz them into
position.
Is the first object placed, placed at the origin?
Could the guys at NI provide an xy indicator?
And second,
I built my application, but in the task bar there is a listing for the app, then another listing for the window name. How can I
clean this up?
XP
LV 6.1
Cheers

Martin,
As far as question 1:
There are 2 different �origins� when speaking about the front panel. There is the 0,0 position that is global to all controls and indicators on it. This origin is a location that does not change. In LabVIEW 7.0 if you have the grids turned on you can see this location as a slightly darker line on the grid and a gray dot. You can reference a controls relative position to this origin by using the "Position" Properties.
There is then the �Origin� property of a front panel. This origin refers to what part of the front panel is viewable. The �Origin� in this sense is what location, referenced to the first position, is at the top left corner of the front panel screen.
Take a look at the attached screen shot.
So if you a
re programmatically moving objects around you need to be aware of both. If you move the scrollbars of the front panel, the �origin� changes. However the positions of all the objects do not.
If you have any questions about this description let me know. The difference between the 2 origins is subtle.
Evan
National Instruments
Attachments:
temp.jpg ‏56 KB

Randomly, my screen freezes and multiplies windows, necessitating a restart - is it a virus ? (!)

Doesn't do it that often, but annoying when it does.

Try resetting the PRAM and perhaps running Disk Utility to see if you have a hardware problem.
Disk Utility
   1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
      Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
   3. Click the First Aid tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Click Repair. Disk Utility checks and repairs the disk.

Horizontal toolbar on Tab Canvas

Hi All,
Please help me get the horizontal toolbar on the tab canvas type. I am using stacked canvas but I am not getting the toolbar. Please help. Maybe I am displaying it wrong . Thanks

1) create a stack canvas and assign window to it
2) create your items on stack canvas
3) set the stack canvas view port width and height according to your visible area of TAB canvas (the size of canvas must be more than View port)
4) set its X and Y position according to the TABs
5) set show scroll bar to YES horizontally
6) set WHEN-TAB-PAGE-CHANGED trigger to show and hide canvases based on current tab selection.
Hope you got the idea

Problem with RGB Values for Canvas Type ‚Horizontal Toolbar' in Webforms 10

Hello,
I have a problem with the canvas type ‘Horizontal Toolbar’ in Webforms 10g.
When I try to set or change the RGB value of a ‘Horizontal Toolbar’ with the forms function
Set_Canvas_Property(‘my_horizontal_toolbar’, BACKGROUND_COLOR, rgb-value)
(at runtime) it has no effect in Webforms 10g for the canvas type ‘Horizontal Toolbar’ (the background color of the horizontal toolbar doesn’t change).
But it works fine for other canvas types like ‘Stacked’ or ‘Content’.
In Oracle 6i (Client / Server) this function works quiet well (even for the ‘Horizontal Toolbar’ canvas type).
The reason why we are using rgb values instead of visual attributes in this case is, that the color of the ‘Horizontal Toolbar’ should be customizeable (via a RGB Field) for our customers (at runtime).
Further more we are using the same technique for Text-Field-Items, Content- and Stacked-Canvases (and all works fine).
Maybe it has something to do with the pre-configured IAS color-schema (blaf).
But changing the color schema (e.g.: from 'blaf' to 'red') has no effect also.
Thanks for your help.

This is probably bug 777312. Call Support for the latest info on this bug and for help getting it fixed.

When I open FF I get 1 XP window and multiple Win7 type windows. Why?

Ever since I switched to FF 4 and now in FF 5, when I open FF I will get 1 window in the WinXP format (no orange button) and multiple windows in Win7 format (with orange button). When FF crashes, I get the apologetic "couldn't restore these" window and it lists multiple empty windows. After I delete them from the restore window and restore my XP window everything works fine. Once I start accessing sites that use "kill windows" such as banks and brokerages, the windows start reappearing again. Can you fix this?
By the way the text in drop down boxes is vibrating in FF4 and FF5. Can you fix this too?

1. I know how to get the orange button, that is not the issue. I am interested in eliminating the problem of having 20 or more windows opening whenever I start FF. By the way the "kill windows" predated FF4, but the multiple window problem started with FF4. I am running FF 3.x.x on another computer without this problem.
2. It seems that some major banks and brokerages open a "kill window" when logging out of their site. The term "kill window" is what appears in the blue band at the top of the window. The window contains no other information.
3. When I say the text is vibrating, I mean that it is jumping up and down vertically. This does not prevent making a selection, but it is annoying.

One Horizontal Toolbar Canvas and Multiple Windows

Similar Messages

Maybe you are looking for