One hour off downlaod

Sine daylight savings time my 8830 makes everything one hour later on the handheld. I have installed all the DAT patchs for XP and for MS Sever 2003 and MS Exchange. I found plaae on the BB web site that allow you to download a DST patch for the Blackberry but the list of version it applies to ends with 4.2.0.73. Mine is running 4.2.2.176. Is there anyway I can correct this?

1) Make sure your BlackBerry is actually set for the correct time and time zone.
2) make sure your PC (where your email client runs) is set to the correct time and time zone.
3) Go ahead and install the DST patch on your BlackBerry. If its not needed it wont be applied.

Similar Messages

Calendar timeline one hour off

In iOS 5 on an iPad 2, using calendar after converting to Eastern Standard Time using the Week View, the Timeline is one hour off (iCal didn't register the time change). When the time is 3:00 EST, the Timeline registers 4:00 pm EST.

I had the same issue - not with Yahoo but Apple's own iCal and MobileMe.
This worked for me:
Go to iPhone Settings>Mail,Contacts,Calendars>Calendars>Time Zone Support
Change Time Zone Support selector to "OFF" then back to "ON".
Exit Settings
NB: NOT Settings>General>Date & Time
My Time Zone Support selector was "on", however Time Zone showed Etc/GMT -4
When I selected Time Zone Support to "off" and then back to "on", Time Zone changed to show "New York" (my local area). Calendar events then displayed the same times as iCal/MobileMe.
Rob

Ical appts. w/alerts are one hour off on iphone - how to fix?

when I create an appointment in ical, it syncs fine with iphone, but the alert (and the appointment) are set for one hour later than what they are set for in ical. The timezone on both is accurate...Any ideas?

Thx Bernard,
You are very helpful
When you went through the steps, were any of the settings different to those that I suggested?
......Yes, Time zone was uncheck in iCal and MM
I don't think you mentioned importing previously. Where are the events originally created?
.....I have a large spreadsheet of college athletic games that we keep in Excel and I import to iCal, they are ALWAYS one hour off after imported to iCal. Long before iPhone and MM too!
I don't see that MobileMe is especially different to dotmac - except that you now have explicit control over the time zone of the calendar (whereas it used to be set to the one from which you originally published).
...Honestly the TZ Support is a HUGE pain and causes Much more trouble for all than anything it is suppose to help with..., been that way ever since iCal came out...
One hour time differences often crop-up on a phone and are usually to do with daylight savings issues, but you don't mention a phone in your set-up so I am assuming this is not the case.
...again this one hour problem, has been an issue for me long before the iPhone and MM...
I have to say that I don't have issues with my calendars and I have these synced across different systems and devices, so for me it really is a non-issue. (I should also say that I travel frequently and don't have problems with events in multiple time zones either.)
...glad it works for you, but it appears this is an issue for many. I used Now Up-To-Date for 10+ years and NEVER had trouble with import/export/sync...
One thing I neglected to ask you is whether you do need to have time zone support - i.e. do you travel with any of the macs to which you sync or do you get invitations that originate in different time zones?
...I have no need for TZ Support even if I were and astronaut
It would also be enormously helpful if you would provide data on what version of OS X and iCal you are using.
....I am on 10.5.5 and iCal 3.0.5
Thx Much

Has there been an update or fix to the digital signature time zone off set being one hour off?

Has there been an update or fix to the digital signature time zone off set being one hour off? I have seen that in the forum that this was identified as a bug back in June 2012. Any updates on this as it is still occurring in my version of Acrobat X with all updates applied. Thanks.

Windows 7
Sent from my BlackBerry 10 smartphone.

I-Cal -- Appointments one hour off

i-cal on i-phone is advancing all of my scheduled appointments by one hour. The i-cal on my i-mac has the correct appointment time, but the i-phone puts all of my appointments one hour ahead of their scheduled time. I missed two events today until I figured out what was happening.

On your iphone go to settings -> general -> date and time.
Make sure that the date, time and time zone is set correctly.
If so, try turning time zone support off, and correct date and time settings.
Go back to the home screen.
Power the iphone off and back on.
Check to see if the time for events is still an hour off.
Hope this helps.

Data one hour off in VI Logger and can't use navigation bars

I believe after Daylight savings time in October my data appeared one hour behind in the Historical Data view in VI Logger. This would not be so big of a problem, but when I go to use the navigation tools to skip through the data or zoom in and zoom out, they do not work and the screen is always taken back to the original time (where there is no data because it is one hour behind.) My data is sampled at 50,000 samples/sec for about 1 minute, so it takes forever to scroll through the data at this sampling rate.
I tried re-setting the time in my Window's system, but this did not help.
Please help!!!

Hi,
There is a KB regarding this issue:
KB 330J3S0U: Why Do My VI Logger Timestamps Seem To Be Off By An Hour?
I would actually recommend referring to the related link on the bottom referring to Citadel Handling Daylight Savings Time. To workaround the Daylight Savings Time, 2 queries are made -- one prior to Daylight Savings Time and one after. Then the two queries are merged to get the entire range of data.
Hope this helps.
Kileen

Imported Events, All One Hour Off :-(

Just exported over 1000 events from our athletic games from Excel to Palm, so that I could save as vcal files.
All the times were correct in Excel and Palm, but after importing to iCal ALL the imported events (1000+) were now one hour earlier.
My iCal preferences did have "Time Zone Support" on.
Weird...any help would be appreciated

1) Make sure your BlackBerry is actually set for the correct time and time zone.
2) make sure your PC (where your email client runs) is set to the correct time and time zone.
3) Go ahead and install the DST patch on your BlackBerry. If its not needed it wont be applied.

Capture time is one hour off

My "capture time" as displayed in the right metadata panel is one hour earlier than it actually happened. I date my digital camera photos by date time and Lightroom displays the capture time an hour earlier than the file date time or the capture date time displayed in other tools, for example, Bridge.
I noticed this from the beginning but it didn't sink in that it's that way for photos from digital cameras as well as these scans I'm trying to get the date correct on.
Anyone have any idea about what's going on?

LR is using the EXIF 'Date Time Original' field to sort by Capture Time .
LR automatically displays Date Time Original minus 1 hour from any Date within a period of Daylight Saving Time.
It does not change the EXIF metadata within the original file.
However (and here is the catch...), if you use the Edit Capture Time function it changes the capture time NOT in relation to the Date Time Original value but to the LR (DTO-1) value.
Thats OK you might think but unlike other metadata changes you make in LR this one gets written straight back to the original image file!
But LR has a solution - 'Revert Capture Time to Original' - or does it...?
After Reverting the Capture Time to Original, I discovered that the EXIF Date Time Original value in the image file was now shifted by minus 1 hour.
Scary bit is I tried this first with JPG and DNG files but then with a Canon CR2 RAW file and got the same result. Just to be certain I looked at the file with a Hex editor and sure enough LR had changed the Date Time Original value by minus 1 hour in the CR2 file without warning.
I don't know about the rest of you but I do not like this 'feature' at all!!!

Time is one hour off (tz issue)

Using Calendar, Date, or System.currentTimeMillis(), the time is one hour early. I am in America/New_York. The root of the problem seems to be that it's not using DST. Printing out the current Calendar says:
java.util.GregorianCalendar[time=1241705420169,areFieldsSet=true,areAllFieldsSet=true,lenient=true,zone=sun.util.calendar.ZoneInfo[id="GMT-05:00",offset=-18000000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null],firstDayOfWeek=1,minimalDaysInFirstWeek=1,ERA=1,YEAR=2009,MONTH=4,WEEK_OF_YEAR=19,WEEK_OF_MONTH=2,DAY_OF_MONTH=7,DAY_OF_YEAR=127,DAY_OF_WEEK=5,DAY_OF_WEEK_IN_MONTH=1,AM_PM=0,HOUR=9,HOUR_OF_DAY=9,MINUTE=10,SECOND=20,MILLISECOND=169,ZONE_OFFSET=-18000000,DST_OFFSET=0] tz=sun.util.calendar.ZoneInfo[id="GMT-05:00",offset=-18000000,dstSavings=0,useDaylight=false,transitions=0,lastRule=null]
It's currently 10:10am (2:00am GMT), and the above says it's 9:10am, but it also says "useDaylight=false".
Being a good hacker, I found the tz updater program, and ran it, and it failed every test.
root@dkramer-laptop:/dload/tzupdater-1.3.12-2009a# java -jar tzupdater.jar -u -v
java.home: /usr/lib/jvm/java-6-openjdk/jre
java.vendor: Sun Microsystems Inc.
java.version: 1.6.0_0
JRE time zone data version: tzdata2008e
Embedded time zone data version: tzdata2009a
Extracting files... done.
Renaming directories... done.
Validating the new time zone data... /data/tzdata2009a.test:509: time zone not found: US/Pacific-New
/data/tzdata2009a.test:510: time zone not found: US/Pacific-New
/data/tzdata2009a.test:511: time zone not found: US/Pacific-New
/data/tzdata2009a.test:4089: test failed: Asia/Gaza
/data/tzdata2009a.test:4090: test failed: Asia/Gaza
/data/tzdata2009a.test:4093: test failed: Asia/Gaza
failed.
Validation tests failed.\
Restoring the saved time zone data... done.
Being a good hacker again, I figured the raw data must be in the JAR file, and I found it there, and replaced the zi directory's content with the content of the zip file. I still have the same problem, though. And I did it in every JVM I have installed, so it can't be pointing at the wrong one.
Sooo...
1) Why is the updater failing?
2) Is there a way to beat Java into submission to use DST?
Thanks.

dj_segfault wrote:
I would be very surprised to find out that time zones were tacked on on to UNIX as an afterthought, given how it was meant to be used in a remote and distributed way.
According to [this article on Wikipedia|http://en.wikipedia.org/wiki/Zoneinfo] , the zoneinfo system dates back to 1986 or so. [According to Sun (nee Oracle)|http://www.java.com/en/javahistory/timeline.jsp] , Java started several years later.
Origins of unix either as 1969
[http://www.bell-labs.com/history/unix/acronyms.html]
or 1970
[http://www.bell-labs.com/history/unix/almost.html]
Thus one would suppose that means that more than 16 years passed between the origins and when the zoneinfo was added.
Or perhaps you are suggesting that unix didn't exist until 1986?
In comparison, java has only been around 13 years.
I understand that Java needs a system-independent way of determining the time zone info, but this isn't a "close enough" kinda situation. Picking the first one it sees is hardly appropriate, especially given [Sun has a whole page on Java and Time Zones|http://java.sun.com/javase/timezones/] and doesn't document this "feature". And now that we have laptops, it's especially important for the user to be able to control what time zone their software thinks they are in.
You missed my point. It isn't a matter of being OS independent, but rather that the situation is in fact muddled on every OS, thus one must make a best guess effort. I have seen experts in unix, groups of them, befuddled by where a particular unix application was getting its timezone info from.

Calender events show up one hour off..

I am trying to load my calender events onto my ipod by creating the event in outlook and saving it as an iCalender and a VCalender format then moving it to the calender folder. the event will show up on the Ipod, but every event is listed as one hour later.
any help? anyone know why this is. I know that I can also sync my Ipod to my outlook, but I don't want all my events and meeting to be copied, just a few select ones.

Make sure your time zone settings are correct on both the iPod and any computer that touches the calendar. Most calendar programs work in terms of Universal Time and use time zone variants to record time as relative to the UTC. Your devices are probably not all using the same time zone code.

Calendar dates synced one hour off

I exported the calendar/contact data from my Palm Pilot to my ICalendar on my Macbook. Then I synced the ICalendar to the Iphone. The result is that all my appointments show up on the Iphone one hour later than what they are supposed to be. I reset the Iphone and synced it again and the same problem showed up.

Thank you, this was the exact problem, as a friend of mine figured out last night. I have another problem now: I can't send email from my iphone. I checked the settings and they are the same, just as synced from the laptop. In addition, I closed the email on the laptop as I had learned previously that it does not allow them both to be open. But I still cannot send email for some reason...

ICal sync one hour off

Hi
My MacBook Pro iCal events are all displaying as one hour earlier on my iphone. For example, something scheduled for noon on my MacBook Pro iCal appears to be scheduled for 11am on my iphone. I am syncing via MobileMe. Any suggestions?
Doug

Check the time zones on each device.

Events from my subscribed to Yahoo calendar are showing up in iCal one hour off and all calendars and computers have been reset to Central Time.

I Use Yahoo calendar as my main calendar so my dh can access it from work, so I subscribe to it for iCal. I recently moved from Eastern Time zone to Central. I didn't re-set all my calendars and apps right away. I have all my calendars and computers on Central Time now but events from my Yahoo calendar are showing up in Eastern Time in iCal. I cant edit them on my Mac or iPad because they're events from a subscribed to calendar.
So, how do I get these events to show up at the right time?
Thanks,
Reluctant Texan

This is a posting of a problem and solution.

One Birthday off One Hour

I have search high and low and it seems that the issue I have has been discussed in one form or another, but no solution has been found. Here is what's happening: one birthday entered into Outlook (either via putting a birthday into a Contact record or via direct input into the Calendar that is marked for all day) ends up shifting one hour on the BlackBerry. So, instead of an All Day appointment on the BlackBerry, it shows as 1 am to 1 am the next day. In Outlook (connected to Exchange), the appointment still shows as All Day (12 am to 12 am).
I have deleted the Calendar entry in Outlook and recreated it in Outlook, but that doesn't work. I have deleted the date in the Contact record in Outlook and re-entered it in Outlook, but that doesn't work. I have edited the Calendar entry on the BlackBerry to be an All Day event, but as soon as the BlackBerry checks in with Exchange, the entry switches back to being one hour off. I just checked OWA and it too shows the Calendar entry with the correct date information. It's only the BlackBerry that's off one hour, and it's only this one record.
This only happens with one particular Contact, and I can't for the life of me figure out why. Does anyone have a solution for this, or is my OCD about this one particular entry being off one hour going to drive me even more insane?
Ian

YOUR QUESTION IS NOT SILLY!!!
I'm very frustrated that starting DAY 1 with version 1.0 of iPhone software, no birthdays over 74 years old appear on the iPhone!!! I missed my dad's birthday last year!!!!!
Applecare support duplicated this for me on the phone and then said - go on line to support and enter feedback to get our attention.
Well I've done this several times.
I wonder if it will take an article in an AARP journal proclaiming age-ism in the iPhone to get Apple's attention!
Yes you are not crazy and we are both a bit disappointed.
Michael

'ntpdate' sets my time one hour slow?

The command:
ntpdate rolex.usg.edu
sets my clock one hour off. Right now, it's 9:51pm, but it says 8:51pm. I live in EST (St. Petersburg, FL), and in my rc.conf file, I have:
HARDWARECLOCK="UTC"
TIMEZONE=EST
I don't think I'm missing anything else. I just want to put the ntpdate command into a cron file, but it sets it to the wrong time. Does anybody know what's going on? I've even tried this when I wasn't drunk.

Probably some issue with daylight saving time. Read the installation howto to find out how to set TIMEZONE something that refers to the place the box is located, not a fixed time zone.
http://www.archlinux.org/docs/en/guide/ … tml#cfile1
Also, letting the hardware clock running UTC time won't work on a Linux/Wincrap dual-boot box.

One hour off downlaod

Similar Messages

Maybe you are looking for