One IDP and multiple web applications

Continuing to look at the configuration necessary to enable SAML on my 2013 farm, I have two web apps which i would like to have SAML running on, both leveraging the same 3rd party IDP for authentication. As I dug into the various stages of configuration
there is a part that establishes the SharePoint site realm identifier...researching what this is for, i found an article by Steve Peschka (http://blogs.technet.com/b/speschka/archive/2010/04/27/how-to-create-multiple-claims-auth-web-apps-in-a-single-sharepoint-2010-farm.aspx)
in it he talks about if you have one IDP but multiple web apps that must use that IDP.
Am i correct in understanding that when steve mentioned "You can only associate a token-signing certificate from an STS with one SPTrustedIdentityTokenIssuer." That the TS cert I import from my IDP is unique and is only able to be linked to one
Web Application...unless i create a URI that makes Sharepoint aware of the additional web app?
Going further...I can't just import another copy of the TS cert and set it to another name unique from the first one?, once this is done i could then create a new unique realm for that additional web app with that other cert. Then when configuring the web
apps it would list two IDP's for me to choose from and i would assign them individually to on or the other.
His article covered 2010 not sure how 2013 works with this stuff...new territory for me here so forgive my lack of knowledge on how this all comes together.
Also, is there some sort of configuration necessary for Office web apps farm to work with SAML or is that handled through S2S communication and is beyond SAML?

Right, so your IDP will have a single certificate which will be single-instanced on the SharePoint farm. Steve's article is accurate for SharePoint 2013 and I've used this method with ADFS. It should be no different, on the SharePoint side, with other IDPs.
WAC is beyond SAML. The S2S/JWTs take care of it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • Pros & Cons of having multiple web applications under one EAR project

    Could anybody let me know what are the advantages and disadvantages of having multiple web applications under one single EAR project?

    Either this is homework, in which case, do it yourself, or you already think you have some pros for doing this. Share with us

  • Authentication Across Multiple Web Applications (Revisited)

              Its been an ongoing battle, but I've made some insight into this situation. The problem stands as it seems impossible to authenticate against one web application deployed as a WAR archive and have that authentication carry across to another web application with the same security constraints. I've been told by BEA that, quote:
              "It seems to me that we are violating section 11.6 of the servlet 2.2 spec which talks about webapps"
              I've also been told that this is fixed in WLS 6.0, reference issue #38732.
              For those of us building production environments using 5.1 instead of 6.0 XML based configuration, this does NOT solve our problem.
              I've dug further into the bowels of 5.1 and found that if you manually set the realm name in the login-config of the security constraint in the web.xml file in each WAR deployment as such:
                   <login-config>
                        <auth-method> [whichever method] </auth-method>
                        <realm-name>WebLogic Server</realm-name>
                   </login-config>
              Authentication will carry across web applications. However, I've noted that the session management then becomes unpredictable. For example:
              I log into the application TESTAPP1 which contains a protected servlet that outputs the session ID and attempts to get the authenticated principal name from the "_wl_authuser_" session variable. Upon first load of the page (after the login dialog box), the session is null [can be fixed with .getSession(true) call instead] and the "_wl_authuser_" object does not exist. Reload the page and the session appears as well as the "_wl_authuser_" object. Strange.
              I then move to TESTAPP2, which does not prompt me for authentication but also is missing the session in the same manner. Upon browser reload, the session is created with a different ID and the "_wl_authuser_" object is now available with the appropriate principal name.
              Upon moving back to TESTAPP1, I am not prompted for authentication however, I am assigned yet another session ID after browser reload, different from the first.
              So it seems that although authentication is carried across web applications, the session IDs as you move from TESTAPP1 to TESTAPP2 change, and then change again but not back to the original when going back to TESTAPP1.
              This is a particular problem since we are using Vignette's V5 as our main client and tracking sessions through V5 - this would quickly become unmanageable if a single page view access three or four different application components with three or four different session ids.
              I'm wondering if we can expect the same behavior from WLS 6.0?
              Ideally, I'd like to see WebLogic use a single session ID to track users across multiple web applications but still have session independence between applications. So if I store something in session in TESTAPP1, its not available in TESTAPP2. Does this outline the behaviour in WLS 6.0? Can anyone verify this?
              Some food for thought. Thanks!
              ./Chris
              Senior Systems Anaylst
              MassMutual Financial Group
              

    Hello! I am searching an answer to this question too!!!
    Did you get some news regarding this item?
    Regards,
    C.M.

  • What's the difference between a web site and a web application?

    I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
    But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
    For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
    using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
    Or maybe I'm totally wrong here - what differenciates between a web application and a website?
    http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
    https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
    defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
    For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
    Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
    runs remotely, and it depends fundamentally on a processing and a data storage backend.
    http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    There is no real "difference". Web site is a more anachronistic term that exists from the early days of
    the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
    Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
    If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
    more like an application as a web app.
    The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
    as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
    Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
    http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

    ...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
    ....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
    ...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

  • Multiple Web Applications WLS 7.0

    Hi,
    I am trying to configure multiple web applications on the same WL 7.0 server and
    am having trouble doing the following.
    I would like to be able to use the following URLS:
    Application #1:
    http://myserver/st/aems - where st/aems maps to the path X:\SimpleTrade2\AEMS\ui\source\htdocs
    Application #2:
    http://myserver/st/acms - where st/aems maps to the path X:\SimpleTrade2\ACMS\ui\source\htdocs
    Root - Default web application - This would be left empty with the idea that our
    company could sell our web applications and we would deploy them on someone elses
    WLS and we would not conflict in any way.
    The problem with the above is that when I look at the DTD and try and configure
    config.xml in the following way:
    <Application Deployed="true" Name="AEMS"
    Path="X:\SimpleTrade2\AEMS\ui\source\htdocs" TwoPhase="true">
    <WebAppComponent DeploymentOrder="2000" Name="aems"
    Targets="simpletradeserver" URI="st/aems"/>
    WLS blows up on startup because it tries to POST-Pend the URI to the path... If
    I change it to:
    <Application Deployed="true" Name="AEMS"
    Path="X:\SimpleTrade2\AEMS\ui\source" TwoPhase="true">
    <WebAppComponent DeploymentOrder="2000" Name="aems"
    Targets="simpletradeserver" URI="htdocs"/>
    This will work but then my URL is not what I want it becomes http://myserver/htdocs
    Is there anyway around this or a way to get what I want?
    Another piece of information, I am developing in Exploded directory format when
    we deploy it will be as an ear.
    Thanks in advance for any ideas!!!
    -Jerry Rodgers

    Thanks for the info Christian.
    I thought I would pass along a bit more inforation for others who might be trying
    to do something similar. In case they run across this message.
    I did determine that if you are using a .WAR file the name attribute of the xml
    node WebAppComponent will allow you to create a different context path than the
    URI. I did not test to see if it allowed you to use a name like "st/aems" I am
    sure "st.aems" would work or any name that may be different than the URI. The
    weird thinhg is that when using the EXPLODED DIRECTORY format the URI is the name
    of the folder under the path and the name property appears to be ignored no matter
    what you change it to you can only get to your web app using the URI.
    Hope this helps someone who comes after me and is looking for the same thing,
    maybe they won't spend 6 hours on it like I did ;>
    -Jerry
    "Christian Plenagl" <[email protected]> wrote:
    >
    Hi,
    this is not possible.
    The URI field contains the directory name of the WebApplication, which
    normally
    is the same name as the directory where you put the webapplication in.
    Christian Plenagl
    Developer Relations Engineer
    BEA Support
    "Jerry Rodgers" <[email protected]> wrote:
    Hi,
    I am trying to configure multiple web applications on the same WL 7.0
    server and
    am having trouble doing the following.
    I would like to be able to use the following URLS:
    Application #1:
    http://myserver/st/aems - where st/aems maps to the path X:\SimpleTrade2\AEMS\ui\source\htdocs
    Application #2:
    http://myserver/st/acms - where st/aems maps to the path X:\SimpleTrade2\ACMS\ui\source\htdocs
    Root - Default web application - This would be left empty with the idea
    that our
    company could sell our web applications and we would deploy them onsomeone
    elses
    WLS and we would not conflict in any way.
    The problem with the above is that when I look at the DTD and try and
    configure
    config.xml in the following way:
    <Application Deployed="true" Name="AEMS"
    Path="X:\SimpleTrade2\AEMS\ui\source\htdocs" TwoPhase="true">
    <WebAppComponent DeploymentOrder="2000" Name="aems"
    Targets="simpletradeserver" URI="st/aems"/>
    WLS blows up on startup because it tries to POST-Pend the URI to the
    path... If
    I change it to:
    <Application Deployed="true" Name="AEMS"
    Path="X:\SimpleTrade2\AEMS\ui\source" TwoPhase="true">
    <WebAppComponent DeploymentOrder="2000" Name="aems"
    Targets="simpletradeserver" URI="htdocs"/>
    This will work but then my URL is not what I want it becomes http://myserver/htdocs
    Is there anyway around this or a way to get what I want?
    Another piece of information, I am developing in Exploded directoryformat
    when
    we deploy it will be as an ear.
    Thanks in advance for any ideas!!!
    -Jerry Rodgers

  • Netweaver administration and SAP Web Application Server r the same?

    Hi All,
    I am a Basis Consultant & new to Netweaver,..
    I am interested in Netweaver administration..
    1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
    2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
    Thanks in Advance ,
    Malti

    Hi Malti,
    You must first download and read this document and then read 'help.sap.com' for what is netweaver.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
    The above mentioned document is a crisp guide to what is WAS.
    Further I got this from the sdn/netweaver webpage
    SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
    You have lots of reading to do now.. hope that helps
    Regards,
    Siddhesh

  • One Search service application for multiple web applications in a single server

      We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one  Search service application , create a Content source for each web
    application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
       In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one  Search Service application for all web applications and using Result sources ,
    I am not getting the results. What could be the problem.

    Hi,
    One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
    Multiple SSA's will eat up RAM/CPU like a mother :)
    As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
    Thanks,
    Mikael
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • Storing SessionManager or Server for multiple web applications

    We currently have one enterprise application with 2 web applications installed. These 2 web applications must share the same session cache.
    Toplink is installed as a shared library for both of these web applications.
    What I am wondering is how Server and SessionManager should be utilized.
    In our servlet initialization of web application one we get an instance of the SessionManager and assign the SessionManager to a static instance variable.
    static SessionManager sessionManager;
    sessionManager = SessionManager.getManager();
    Now whenever we want to get a client session from either web application we make the call
    Server serverSession = (Server) sessionManager.getSession("XXX");
    From looking at the code for the sessionManager.getSession("XXX") I see that this
    results in a synchronized method invocation which is in turn bottlenecking our database access code.
    My question is should we not just be storing the Server in a static instance variable to distribute client sessions to both web applications and not the SessionManager.

    Hi,
    One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
    Multiple SSA's will eat up RAM/CPU like a mother :)
    As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
    Thanks,
    Mikael
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • Problem in synching multiple web applications

    I have a domain called myDomain. In this domain I have 2 enterprise applications
    say
    ent1App with ent1App-project and ent2App with its ent2App-project. Each enterpsrise
    application has one web application
    (webApp1 and webApp2 respectively). I have the same set of webflow files (.wf
    files) in both
    ent1App-project/application-sync/web-apps/webApp1 and ent2App-project/application-sync/web-apps/webApp2
    directories.
    Now suppose I synchronize my webflows (using EBCC) for say ent1App. The synchronization
    is accomplished without any problems
    and this is confirmed when the entries get updated in the Master Data Repository
    where all the webflows for ent1App get
    stored. This is as viewd using the datasyncservlet.
    If I now do a synchronization on the other enterprise application called ent2App,
    the synchronization takes place
    successfully but when viewed in the datasyncservlet, it shows up the entries for
    the webflows of ent2App. i.e. the entries
    for all the weblows of ent1App which were shown in the Master Data repository
    are not shown.
    We looked up the Cloudscape database to ensure that the entries for both the enterprise
    applications are present and it does
    contain the records for both the applications. This however does not show up in
    the datasync servlet. Due to this we get a
    namespace not found error whenever we try to access the application whose entries
    are missing in the master data repository.
    I have separate names for my datasync folder for each of the applications in my
    config.xml as shown below
    ent1App
    <Application Deployed="true" Name="ent1App"
    Path=".\config\myDomain\applications\ent1App" StagedTargets="iden_staging">
         <WebAppComponent DeploymentOrder="1002" Name="datasync" Targets="iden_staging"
    URI="datasync"/>
    ent2App
    <Application Deployed="true" Name="ent2App"
    Path=".\config\myDomain\applications\ent2App" StagedTargets="iden_staging">
    <WebAppComponent DeploymentOrder="1002" Name="datasyncDev"
    Targets="iden_staging" URI="datasyncDev"/>
    I am using WLS6.1 SP4 and WLP 4.0 SP3
    Can someone please tell me what could be the problem?
    Thanks
    Shah Jimmy

    When you peform a data sync you are updating the data_sync_item table
    with the EBCC xml files. For those files that are not present in the
    EBCC project they will be deleted from the table.
    You can not use multiple enterprise applications that contain Portals.
    Try using using multiple domains that contain separate databases for
    datasyncs.
    Here is a snippet I recently sent out in a support case:
    Unfortunately there is not a documented best practice for maintaining
    multiple projects and enterprise applications. In my opinion if you
    plan to create multiple enterprise applications they will need to
    maintain separate application components and web applications. The
    enterprise applications will need to use the same portal resources
    (pools) and therefore same tables. The synchronization modes documented
    at http://e-docs.bea.com/wlp/docs40/deploygd/appdata.htm explain the
    limitations in data sync -- either all files are deleted and updated or
    only modified files are updated. Either mode will delete files from the
    data_sync_item table that do not exist in the current project.
    Therefore one project will need to be used per domain.
    -- Jim
    Jimmy Shah wrote:
    I have a domain called myDomain. In this domain I have 2 enterprise applications
    say
    ent1App with ent1App-project and ent2App with its ent2App-project. Each enterpsrise
    application has one web application
    (webApp1 and webApp2 respectively). I have the same set of webflow files (.wf
    files) in both
    ent1App-project/application-sync/web-apps/webApp1 and ent2App-project/application-sync/web-apps/webApp2
    directories.
    Now suppose I synchronize my webflows (using EBCC) for say ent1App. The synchronization
    is accomplished without any problems
    and this is confirmed when the entries get updated in the Master Data Repository
    where all the webflows for ent1App get
    stored. This is as viewd using the datasyncservlet.
    If I now do a synchronization on the other enterprise application called ent2App,
    the synchronization takes place
    successfully but when viewed in the datasyncservlet, it shows up the entries for
    the webflows of ent2App. i.e. the entries
    for all the weblows of ent1App which were shown in the Master Data repository
    are not shown.
    We looked up the Cloudscape database to ensure that the entries for both the enterprise
    applications are present and it does
    contain the records for both the applications. This however does not show up in
    the datasync servlet. Due to this we get a
    namespace not found error whenever we try to access the application whose entries
    are missing in the master data repository.
    I have separate names for my datasync folder for each of the applications in my
    config.xml as shown below
    ent1App
    <Application Deployed="true" Name="ent1App"
    Path=".\config\myDomain\applications\ent1App" StagedTargets="iden_staging">
         <WebAppComponent DeploymentOrder="1002" Name="datasync" Targets="iden_staging"
    URI="datasync"/>
    ent2App
    <Application Deployed="true" Name="ent2App"
    Path=".\config\myDomain\applications\ent2App" StagedTargets="iden_staging">
    <WebAppComponent DeploymentOrder="1002" Name="datasyncDev"
    Targets="iden_staging" URI="datasyncDev"/>
    I am using WLS6.1 SP4 and WLP 4.0 SP3
    Can someone please tell me what could be the problem?
    Thanks
    Shah Jimmy

  • How to use a tag library in multiple web applications?

    Morning all,
    Environment: Tomcat 5 on Apache2 using Mod_JK connector on Windows XP
    I have developed a custom tag library and tested it out and its working great.
    Now, How do I use in my other web applications? Do I need to copy the JAR file to webapps\app1\WEB-INF\lib, webapps\app2\WEB-INF\lib etc directories?
    The problem with this approach is, if I happen to change the tag library code, I will have to make sure that I remember to copy the new JAR file to the above mentioned directories. Ofcourse I can write a simple ant script that would do it for me, but I was wondering if there was an efficient and yet simple way of achieving the same.
    Thanks in advance,
    Joe

    Thanks Vidyut! You've answered my question.
    I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
    Currently, my web.xml is as follows and it doesn't work.
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <taglib>
    <taglib-uri>http://abc.com</taglib-uri>
    <taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
    </taglib>
    </web-app>
    Thanks again!
    Joe

  • Content Conversion: One row with one header and multiple item structures. Possible?

    Dear all,
    I have a input that looks like this:
    HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
    Here's the actual input
    TEHGMESS0026000000288S0001TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
    HeaderKey = TEHGMESS
    ItemKey = TEI2____
    Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
    So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
    Input that works
    TEHGMESS0026000000288S0001
    TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
    TEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
    Matching configuration that works for input which structures are delimited by new line.
    Paramentername
    Parametervalue
    Transform.Class
    com.sap.aii.messaging.adapter.Conversion
    Transform.ContentType
    text/xml;charset=utf-8
    xml.conversionType
    StructPlain2XML
    xml.documentName
    MT_TEI2Split
    xml.documentNamespace
    http://hansgrohe.com/pi/MQ/TEI2/10
    xml.keyFieldName
    SATZARTKey
    xml.keyFieldType
    CaseSensitiveString
    xml.processFieldNames
    fromConfiguration
    xml.recordHeader.fieldFixedLengths
    8,4,9,1,4
    xml.recordHeader.fieldNames
    SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
    xml.recordHeader.keyFieldValue
    TEHGMESS
    xml.recordItem.fieldFixedLengths
    8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
    xml.recordItem.fieldNames
    SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
    xml.recordItem.keyFieldValue
    TEI2____
    xml.recordsetName
    records
    xml.recordsetStructure
    recordHeader,1,recordItem,*
    Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
    Jens

    SAP came back to me with this answer:
    First, I would like to point the documentation for Message Transform
    Bean (MTB) in 7.4:
    http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm&current_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
    As it is written at the beginning of this document, MTB is used to
    call classes written for the Plain Adapter Engine. So you may find
    additional documentation about the parameters for convertion in the
    documentation of the Plain Adapter Engine
    (http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm&current_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
    arranged line-by-line. The endSeparator just adds additional character
    string as a separator after the last column in a row.
    I hope that this answers your question. MTB expects the data to be
    structured line by line.
    You may add a custom module, which transforms the message in the
    expected format.
    If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
    xml.NameA.endSeparator
    Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
    Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
    Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
    Cheers
    Jens

  • ALV for one header and multiple item table

    Hello All,
    I have a requirement to display records from one header and three item table using ALV.
    The output should be such that
         1-line - record from header table
         followed by - records from the 1st item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
         followed by - records from 2nd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
         followed by - record from 3rd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
    Can you help me out.
    Thanks and regards,
    Subramanian.

    hi
    data population is same for alv or normal reporting.
    First you select the data from header
              select from item data using for all entries in it_header where....
              select item 2
              selct item 3
    loop a it_header
    read item1
    read item2
    read item3
    check sy-subrc
    move to i_final
    then build fieldcatalog and display..
    look the example
    SELECT   PERNR
               STELL
               WERKS
               ABKRS
               ENAME
               ENDDA
               BEGDA
               ORGEH
               PERSG
               PERSK
               KOSTL
          FROM PA0001
          INTO TABLE I_PA0001
         WHERE PERNR IN S_PERNR
           AND ABKRS IN S_ABKRS
           AND PERSG IN S_PERSG.
    SELECT  SPRSL
                STELL
                ENDDA
                STLTX
                FROM T513S
                INTO TABLE I_T513S
                FOR ALL ENTRIES IN I_PA0001
                WHERE STELL = I_PA0001-STELL AND SPRSL = 'EN'.
        SELECT  PERSA
                NAME1
             FROM T500P
             INTO TABLE I_T500P
             FOR ALL ENTRIES IN I_PA0001
            WHERE PERSA EQ I_PA0001-WERKS.
      LOOP AT I_PA0001 .
    READ TABLE I_T513S INTO WA_T513S WITH KEY STELL = WA_PA0001-STELL
                                                  SPRSL = 'EN'
                                                  ENDDA = WA_PA0001-ENDDA.
        IF SY-SUBRC IS INITIAL.
          MOVE WA_T513S-STLTX TO WA_FINAL-STLTX.
        ENDIF.
        V_SNO = V_SNO + 1.
    Read Value For Personal area Text.
        READ TABLE I_T500P INTO WA_T500P WITH KEY
                                PERSA = WA_PA0001-WERKS.
        IF SY-SUBRC EQ 0.
          MOVE WA_T500P-NAME1 TO WA_FINAL-NAME1.
        ENDIF.
    FORM DISPLAY_DATA .
    --BUILDING FIELD CATALOG--
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
         I_PROGRAM_NAME               = V_REPID
         I_INTERNAL_TABNAME           = 'I_FINAL'
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
         I_INCLNAME                   = V_REPID
      I_BYPASSING_BUFFER           =
      I_BUFFER_ACTIVE              =
        CHANGING
          CT_FIELDCAT                  = I_FCAT[]
       EXCEPTIONS
         INCONSISTENT_INTERFACE       = 1
         PROGRAM_ERROR                = 2
         OTHERS                       = 3
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *--Modifying titles of Field Catalog--
      READ TABLE I_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'S_NO'.
      IF SY-SUBRC EQ 0.
        WA_FCAT-REPTEXT_DDIC = 'X'.
        WA_FCAT-SELTEXT_S = TEXT-041.
        WA_FCAT-SELTEXT_M = TEXT-041.
        WA_FCAT-SELTEXT_L = TEXT-041.
        WA_FCAT-OUTPUTLEN = 3.
        WA_FCAT-JUST = 'L'.
        MODIFY  I_FCAT FROM WA_FCAT INDEX SY-TABIX.
        CLEAR WA_FCAT.
      ENDIF.
    do for all the fields u want to display..
    Award points if useful.

  • Possible for JRockit Mission Control to Monitor Multiple Web Applications

    I have some questions regarding JRockit and Weblogic Server.
    The JRockit Mission Control allows users to monitor JRockit JVMs.
    If a JVM runs a Weblogic server instance which runs a couple of web aplications, is it possible to monitor individual web applications separately?
    If it's possible, is there any kind soul who can guide me through the process in setting up.
    Please assist. Many Thanks!
    Thanks,
    Benjamin

    Hi,
    You can use *"wlnav.war"* which is freely available on net. to monitor Servers along with some of the Application attributes like application state/ Session count/ ...etc
    "wlnav.war" actually uses WebLogic MBeans to get the details of the Server and Applications...Same thing we can do using our own MBean JMX Codes as well... But still these JMX codes will not be able to tell exactly that which object belongs to which Application.
    Thanks
    Jay SenSharma
    http://weblogic-wonders.com/weblogic/jmx_weblogic/  (WebLogic Wonders Are Here)

  • HT1495 Multiple logons for one computer and multiple devices trying to use one itunes account.

    I have one computer with a logon for Kids and one for Adults.  There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account.  I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?

    It sounds like each Windows user has it's own iTunesLibrary.itl file.  If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
    If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected.

  • Can I use multiple IDs for one iTunes and multiple devices

    We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes  account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
    Thanks for any advice

    I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

Maybe you are looking for