One info package to two cubes- dataloading time on each cube?
Hi all,
1.we had One infosource - one info package - sending data to 2 info cubes.now we need to figure it out how much time is taken for 2 individual cubes
for ex: data laod time is 10 mins how can we figure out which cube is consuming more time or less time?( acube 7 min and bcube 3 mins )
2.how do we find out the cubeload time..
from psa to transfer str,transfer str to comm str & from comm str to cube like this we need to make report on time consuming at each phase..( time splits between two stages )
Thanks and Regards,
Ramesh.
ramesh,
there's no straight way to do this. you're going to have to open the monitoring for that infosource, click on the details tab, go to the processing (data packet)->update rules, and manually compute how long each data package took transferring into a cube. (compare the time of the start of processing update rules and end of processing update rules for a certain data target)
sorry that there's no other way, but i hope that helps - and since you're new here, don't forget to give out some points to those that help you. =)
ryan.
Similar Messages
-
Two info cubes & one info package
hi guys,
i am new to sap environment, now learning sap bw. can someone can help me, how can i execute two infocubes in one info package. i could able to execute only one infocube... can we execute two inofcubes at the sametime... can some help me with detail procedure..
cheers,
kishore...Hi Kishore,
Go to the Process monitor screen.Under the Header tab,you have datatargets,where your 2 infocubes will be displayed.
Click on the Cube2 and you will be navigated to the respective cubes.and here go to the requests tab and and click on Montior screen and you will be naviagted to the process monitor.
or
In the infopackage,under datatargets tab.Sleect any one cube and will be naviagted to the Manage session.Under requests tab sleect the monitor screen and you will be naviagted to monitor screen of the cube 2.
No,you cannot monitor both cubes from same session.You can open a new session and have 2 sesssions montoring 2 cubes
or go to RSMO and have 2 sessions and monitor it
hope it helps. -
For the last week or three Firefox refreshes two or three times for each refresh. Sometimes it refreshes for no obvious reason. For instance, I'll be in the middle of typing into a forum's post block & it refreshes. Or filling out an online form. Or simply viewing a page.
You can check for issues caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
This morning, I upgraded to Snow Leopard from v10.5.8. Then, I exported 11 contacts from our old Now Contact database, intending to import that info into Address Book. It was an experiment, as we have 1199 contacts in 20+ categories and want to eventually get them into Bento from Address Book. The export automatically created a file called Export.vcf on the desktop, after I highlighted the 11 contacts. I tried to look at the info, but when clicked it opens Address Book, which then simply asked if I wanted to import the 11 contacts to it. I clicked yes. Then in checking Address Book 7, not 11 contacts appeared. I clicked on "All Contacts" and there were 1630. We only have 1199, so where did the extra 400+ come from? Since I had already clicked twice on the Address Book window, I couldn't undo the import. So I thought 'Ok, I'll trash Address Book and go to Time Machine, find Address Book, go to right after the upgrade to SL, hit Restore and bingo. Nope. I keep getting the post-import info, not pre. Con someone direct me to a solution? I want to get rid of the import contacts plus the extra 300 or so ( I already had a hundred or so in several categories)? Then, I need to figure out (1) why ALL the old records were exported from Now Contact, (2) where they were hiding in that .vcf file when Address Book recognized that I only wanted to export 11, (3) why Address Book showed only 7 imports in the "Last Import" group, but showed ALL my contacts in the "All Contact" group, even though they should nearly all have been safely untouched in the Now Contact DBase file. PS, I am not especially computer savvy. Thanks for any enlightenment.
Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
Porblem with One Info Object. in Two Structures
Hi,
I am have a Object like Material Type which i need to use in KF structure by filtering in selection,
and also same in char Structure with different selection in one query.
But my Problem is I am unable to Drag this Object in to the selection panel.
if i delete in KF Structure than i can do this. I want both
Pls help me anybody how can i salve this.
Regards,
Madhu.Once you restrict the characteristics value in teh structure in ROWs, your KFs will be automaically restricted by that value. Why do you want to create another selection in KF structure?
System does not allow because of a simple reason.
You have already put the restriction on this characteristics from the ROW area. You can do two things.
Either you can create the same selection in the KF structure or you will create a different selection in KF structure. If you create a same selection, there wont be any change in the result. (So, doesnt make any sense to allow you to drag it). If you create with different selection (So, doesnt make any send as it will not bring any number being different selection at that cell).
Can you please explain your requirement? May be possible that report can be designed with different design.
- Danny -
What is the Cube refresh and how to determine cube refresh time for a cube
hi,
what will be the meaning of cube refershing, i believe it is clearing and updating the data in production weekly or monthly basis. how it will happen in general, do we need to do mannually, will there be any scheduler in production.
please clarify me how to determine refresh timime for a cube, what facters we need to consider.
Thanks,
bhavani.I can't give you specific guidelines as every client/cube is different based on needs. Here is some general info.
Cube refresh is a pretty generic name for a number of things.
It could be as you say clearing and updating the cube, or just updating, or running calculations or running restructure operations. It's pretty much what you need it to be for your environment. As to timing, There are two timings to consider. First, the frequency of refresh. Is it Monthly, weekly, Daily, hourly? That depends on the application and the needs of the users. The second thing is how long the refresh takes. Is it seconds, minutes, hours, etc. This has to be considered to meed the User's SLA and hopfully fit into a batch processing window. Refreshes can be done manually or automated with batch or shell scripts (depending on the OS) and scheduled through whatever scheduling package is on the box (Windows AT scheduler, Cron, third party, etc) -
Process Chain and Info Package Transportation?
Hello All
Case 1
How to transport a Process chain and a Info Package Individually?(<b>first time from DEV to QA</b>)
Case 2
I have 9(<b>IP1 to IP9</b>)infopackages and 3(<b>P1 to P3</b>) Process chains and in each Process chain I have 3 Info packages like IP1,IP2,IP3 in P1 and so on.,
Now is it necessary to transport Infopackages and Process chains individually or is it enough to transport Process chains only(If v transport Process chains will the Infopackages will also transport)then how to assign a request to each one?
What I mean is,all <b>Infopackages are in $TMP(Package</b>),and Process chain is also <b>$TMP</b>,Now is it necessary to change the package for Infopackages as well as Process chain and Tranport only PC,Iam confused here,can anyone help me out?
Many thanks
balajiHi Balaji,
If you have created new infopackages then you have to transport them. It is not necssary to transport the info-packages if you have them in the process chain but have not changed them.
Also you cannot transport any BW object with $ tmp package. Assign a package and then transport the objects.
The best way to transport the process chain is from the RSPC screen. Click the transport button there and collect all the objects and transport them.
Bye
Dinesh -
Hi,
I want to scheule a load at later time today from the infopackage.I created one info package with background job,in the scheduling options I have given date and time.I would like to confirm whether it works?
Could some one clarify this?
Thanks
ManishAfter specifying the scheduling option, did you execute(pressed 'start') it, or just saved it?
If you pressed 'start', it will run it at the specified time. To check this, you can see a job in 'released' status with that start time, you can see that in SM37. -
Info Package in Process Chain - Performance Issue
Dear All,
We have some Info Package in Process Chain which when triggered initially turns red, then again yellow, after sometime red/green. These status keeps changing and finally results in green status. These infopackage takes 15-30 mins to complete.
And the info package error message shows "Processing time overdue". The chain runs daily and this issue also occurs on a daily basis.
Does anyone one of you have an idea of how to deal with this performance issue?
Regards.Hi
As you said--
"initially time out time was set to 10 mins, so it was turning red at 10 mins. Later i changed it to 30 mins, then it is turning red at 30 mins, this info package takes maximum 20 mins to complete.
thatsy i asked whether there will be any problem if we remove this time out time."
I guess, its not mandatory to include the timeout value. Just try to execute the IP without entering the timeout value.
It should work.
Let me know if this helps.
Regards
SaiPrasad -
DO we need to run Info Package every time before DTP Process to load the da
Hi friends,
IN BW 7.0 do we need to run every time the Info Package before DTP process to load the data into target or only one time we need to run the Info package then from that point onwards we need to run DTP process, Please let me know. basically I am planning to create the process chains so I should put Info package before DTP to load the deltas or full load??
Thanks a lot,
HarshanHi,
When you are loading from source system i.e. datasource to target, you will always have to use an infopackage to load to PSA and a subsequent DTP.
When loading for instance from DS to Cube, you only need to schedule a DTP.
I hope this helps you.
Best regards,
Olav -
Info Package in Process Chain taking long time
Dear All,
Info Package in Process Chain having 0 records is taking 1 hr 5 mins to complete. Time out time is set to 10 mins.
Does any one of you know the reason why it is happening like this?
Regards.When the info package status turns to green : final message is :
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Diagnosis
The data request was a full update.
o In this case, the corresponding tab
contain any data.
o System Response
Info IDoc received with status
Procedure
Check the data basis in the source system.
Analysis
========
No data available in the source system for this selection
No further action necessary
When the status was red, I checked BD87 and SM58 and there were no entries.
The corresponding job in sm37 took 869 seconds to complete. Below was the job Log.
Job started
DATASOURCE = 0CO_PC_02
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 1345319, Duration 00:00:00
IDoc: Start = 24.10.2011 18:29:54, End = 24.10.2011 18:29:54
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 1345330, Duration 00:00:00
IDoc: Start = 24.10.2011 18:44:18, End = 24.10.2011 18:44:18
Job finished.
PLease help.
Regards. -
0HR_PT_3 Load is taking too much time when i execute the Info package
Dear All,
i am working on HR Module.
i am extracting data from 0HR_PT_3 from R/3 PRD system through info package its taking long time to load data.
I have checked in RSA3 in R/3 PRD system whenever i extract "0HR_PT_3" instead of showing records its showing this error message "Infotype 2002 not read due to lack of authorization" .
could you please let me know any one have resolve this issue.
Thanks,
Venkat.
Edited by: venkatnaresh7 on Jul 12, 2011 11:49 AMhi
I am facing same issue. did you able to fix this? -
To Join two SAP fields into one info object
Hi All,
Can you please suggest the best method to concatenate values from two R/3 fields into one info object master data table?
The requirement is to create a Sales report where I need to report on sales against sales type.
Sales type is a list of joint values of item category ( 0ITEM_CATEG) and bill type (0BILL_TYPE).
So, I need a list of all item categories and billing types in a single object and report sales value against it.
Please suggest.
Thanks,
SharmishthaHi Venkat,
In DSO any case you will not be having more than 16 Keys. I am surprised seeing requirement of more than 16 keys, but anyways you need to go with some workaround.
You can concatenate multiple Fields and map to one Dummy InfoObject which will be Key in DSO so in actual you have more than 16 Keys but have 16 Keys in system.
But analyze requirement in detail because this will increase data redundancy and time for load will get increased.
Also for new issues start new discussion otherwise people will not able to help you in this forum.
Regards,
Ganesh -
BW 2.0B, info package selection, cant use two system variable for 0CALMONTH
Hi Experts,
I am working on BW 2.0B in APO system. There is an info package for which I want to supply two selection value for 0CALMONTH as equal to current month and last month. System variables 0CMONTH (for current month) and 0CMLMON (for last month) are available but I am not able to use them both.
If I change the variable in one selection, it automatically changes the other one too, making both the selection as same variable.
Can you suggest any solution/idea?
Regards,
Purvangany ideas to achieve this?
-
I have three computers backing up onto the same Time Machine. The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers. How can I do this?
"You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
Mac 101: Time Machine
Maybe you are looking for
-
DHT is no longer working since Kernal upgrade
I'm running through a router using a direct conection I use the Blue frog, and Deluge, the router is set up for port forwarding with ports for both applications and has worked flawlessly for the last 2 years. since the last kernel upgrade the ports a
-
BACKGROUND: Using CF9 and FB4, I'm building an image catalog. Data about the images is stored in a database (Firebird). The images themselves are stored in files in my file system. (M$ Windows XP Pro). In an attempt to allow the user to control w
-
ClassCastException on classLoader
Hi everybody, I'm having a bit of a problem with some reflection code and I can't work it out. I have a method which get as as one of its parameters a class that implements an interface where resides the method I'm interested in to execute, something
-
Currency Conversion BPC 7.5 NW
Hello Everyone, I have an issue with the currency conversion functionality. I know there were lot of discussion about FXTRANS topic. However, I am facing an issue while running the package: Application: Package Status Error". Exception occurred when
-
At the time of charging current generate in my iPhone what I do?
At the time of charging current generate in my apple phone what I do ?