One item doesn't recognize me as owner, and I cannot erase it

Hi everyone, I hope someone can help me!
I have a Macbook Pro, apparently outdated (Mac OS X 10.6.8). I saved a file ones and added custom access to it, but now, I've been trying to erase it and I can't do it! Every time that I send the document to the trash, a dialog box opens and asks me for my administrator password, I write the password and nothing happens. It's like the file doesn't recognize me as owner. What can I do?

See if any of the information here can help you.
Good luck,
Clinton

Similar Messages

My printer will not recognize greeting card stock and I cannot use card programs.

I have changed all of the necessary thing when loading card stock into the printer, and yet the printer asks for paper. It doesn't recognize the card stock and I cannot use any of my greeting card programs.

You are not alone with this issue. I wish that HP would accept the fact that printing with card stock is an issue that needs to be addressed and corrected. My Officejet 8600 Plus will not pick up nor print any weight (67 or 110) card stock. It is listed in their specifications that it will! Neither Best Buy or Office Depot could get their display units to print card stock either. Under troubleshooting they list a series of steps that do not apply to the basic problem. When trying to print to card stock you receive a "Out of Paper" error message. It is a known issue and not being addressed. I just posted this same problem so will see what comes back and stay in touch.

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
Michele

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Why my dvd drive on MBPro doesn't recognize blank cd-r and dvd-r?

Super drive on my MB Pro doesn't recognize blank CD's and DVD's.Both are ejected after 10-15 seconds.It reads all other CD's and DVD's....
That means I cannot burn new CD's and DVD's.Any sugestions?

OK
Then the best way to pin this problem down is to split the process into two parts
• Encoding
• Burning
By "Save as a DiskImage" - If this works and plays OK with DVD tool - then
• Material Used are OK
• iDVD and Encoding is OK
Then use Disk Util tool to burn to DVD and now
• I only use Verbatim
• DVD-R (as they play on more and even older DVD-players)
• Burn Speed set down to x2 or x4 - to get less Burn Errors (and even the DVD will play on a PC or the Mac that made it - NOT ALWAYS SO ! )
• and I never let Start-Up Hard Disk go under 25Gb free space
• NO other program during process or burning - e.g. Screen, Energy-Savers, Internet, etc - No Nothing
BTW - DO NOT pop in any CD or DVD until Mac ASK'S for it ! else You wind up with a Data-DVD if burned.
Yours Bengt W

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

My macbook doesn't recognize my iphone 5 and wont let me sync my music or apps in itunes

My itunes 10.6.3 (25) in my macbook OS X doesn't recognize my iphone 5. So I can't sync my apps or music to my phone (although I was able to sync my photos and videos through iphoto) I rebooted both my phone and mac and switched connecting ports. Nothing.

Welcome to the Apple Community.
Have you tried in different locations, does this happen everywhere. Have you tried a hard restart.

Solaris 9 x86 doesn't recognize my lan card and can't get the drivers

Hi guys! I have a problem with my solaris os.. It doesn't recognize my realtek 8029 lan card and this means that i can't download the drivers from the internet.. Anyway i got the drivers using my other installed OS ( slackware linux 9 ) from the www but there's a problem it seems that i cant mount the harddrive where the driverz are..neither linux->mount solaris hd disk nor solaris->mount linux hd disk do the trick..(+ i don't have a floppy drive ) Any ideaz how to transfer the drivers from the hd disk where the linux is installed to the solaris disk..?

I have the same NIC (RTL 8029 chip), and.. the solution 4 you. :) I made this quick guide for me, so I can add netwotk support to my system, very easily. Happy to see that another person needs that info.
Follow these steps:
1. Download the file from the link below, put it at /, and unzip it.
ftp://sun.drydog.com/pub/solaris/nei-i86pc-solaris5.7.zip
2. Run (from command line) the command:
add_drv /kernel/drv/nei; devlinks
3. Create the file /kernel/drv/nei.conf and write
name="nei" parent="isa" reg=1,0xe800,0x1f interrupts=5;
(this is the hardware address for my card, you should find your's).
4. Create the file /etc/hostname.nei0, whick will contain the line
192.168.0.1
(this is the IP addr. I use for my internal network, change that to any other reserved addr. you like, like 10.0.0.1)
5. If you use IPv6, create /etc/hostname6.nei0 ,too, with the same contents as hostname.nei0
192.168.0.1
6. Edit /etc/hosts and add the line:
192.168.0.1 myname.mydomain
7. Edit /etc/inet/hosts and make the file look like this:
127.0.0.1 localhost
192.168.0.1 myname.mydomain loghost
8. Edit /etc/inet/netmasks and put:
192.168.0.1 255.255.255.0
9. Run from command line mode or from a terminal:
/usr/sbin/drvconfig -i nei
10. Run from command line mode or from a terminal:
touch /reconfigure; /usr/sbin/reboot
11. After rebooting, type "ifconfig nei0 plumb" to make sure the device was recognized.
It should show up in the output from typing "prtconf"
Normally, now you can use your RTL8029 card.
I hope I help a little bit mate. :)

Lightroom doesn't recognize ACR 5.5 and my D300s RAW images

Lightroom 2.4 does not recognize my Nikon D300s RAW images. I downloaded ACR 5.5 and after install both Bridge and Photoshop CS4 handle the D300s RAW images but my Lightroom 2.4 will not import them saying that it is a damaged or unrecognized file type. I have rebooted my entire Vista system and the problem persists. Any suggestions on how I might make Lightroom recognize ACR 5.5 and my D300s RAW images? Thanks in advance.
Harry Campbell

Harry Campbell wrote:
Any suggestions on how I might make Lightroom recognize ACR 5.5 and my D300s RAW images?
You don't want Camera Raw 5.5 (unless you want to use Photoshop CS4), you want the DNG Converter 5.5 which can convert the D300 raws into DNGs that are compatible with Lightroom 2.4. The next version of Lightroom (presumable 2.5) will have the support built in without needing the DNG Conversion...

Yahoo website-the news feed doesn't scroll, it doesn't show 1-? articles and I cannot click on or to go to next five articles

On other computers in my house (not Windows 8), I can go to the Yahoo.com website and I can see the top news articles. It gives me a 1-# for how many articles there are. Then after a few seconds, the picture changes and it shows the next article. After the five articles are done, it scrolls and shows the next five. Or I can just click on the > button and go to the next articles. On my main (new) computer which has Windows 8 installed, I do not get the scroll and I cannot get to any articles other than the original top five that they show. I have a snapshot of it, but it doesn't look like there is anywhere here that I can upload it.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Two select commands in one item doesn't work?

I've created an item in a region which contains one select sentence which goes like:
select sum(r.amount * price.prices * re.sats * ac.sats)
from registration r, pricetype price, ressoucecostdriver re, activitycostdriver ac
where
r.art_art_id = price.art_art_id
and r.activity_activity_id = 42
and re.ressourcecostdriver_id = 47
and ac.activitycostdriver_id = 53;
to that sentence I need to add the following select sentence as a sum of this one and the previous select sentence
select sum(r.amount * price.prices)
from registration r, pricetype price
where
r.art_art_id = price.art_art_id
and r.activity_activity_id = 22
So what I really need is the sum (sum(r.amount * price.prices) + sum(r.amount * price.prices * re.sats * ac.sats)) so to say, but without the where sentences is the same.
I've tried to "rename" the last select sentence to somthing like
select sum(rr.amount * priceprice.prices) to avoid the where constraints to apply for both of the select sentences, but that doesn't work apparently.
Can anyone help me?

Morten,
If you look closely at the query I posted for you, I have used WITH statements to encompass each of your two queries, I then (in the last line) perform a simple select from those queries, you could simply add the two values together there if you like.
For example -
jes@TESTDB> with tab1 as (select 1 as num1 from dual),
2 tab2 as (select 2 as num2 from dual)
3* select num1, num2, (num1+num2) as num3 from tab1, tab2
      NUM1       NUM2       NUM3
         1          2          3
jes@TESTDB> with tab1 as (select 1 as num1 from dual),
2      tab2 as (select 2 as num2 from dual)
3*    select (num1+num2) as num3 from tab1, tab2
      NUM3
         3

Hey my windows 7 computer doesn't recognize my ipod? and my ipod is stuck in the connect to itunes screen and is low battery but doesn't want to charge? help

Plese help?
First my ipod didnt show it was charging but still turned on(it was dead) so i tried the hold sleep and wake button but my computer(windows 7) wont recognize it so its stuck on the connect to itunes screen.
PS i took it to get it fixed and they said they changed the battery not sure if that had anything to do with it????
please help and Thank You.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

I let my Macbook die and now it doesn't recognize old wifi connections and doesn't trust internet.

Hi-
I have often let my Mac die, while going to sleep etc, this is the second time that when I charge it back up and turn it on it doesn't work the same. It doesn't remember the passwords of old wifi networks that I have told to "remember this network." Then when I do retype the password and connect there's a screen on the internet that says it cannot trust site like Facebook or Google and sometimes there's "add exception" sometimes there's not. This is on Mozilla Firefox also.
Last time this happened I can't remember what I did but it eventually started going back to normal....But now, I don't know, any suggestions??

How much free space on the HD? You should have 30 GB free for the system to do "temporary work", such as saving preferences and internet settings in browswers.

Skype to go doesn't recognize my phone number and ...

None of the skype to go numbers recognize my mobile phone number and or pin. I reset the pin but it makes no difference.

Deleting the entry and making a new skype to go number worked. That's after I reconfirmed my 4 digit pin. Who knows why?

HELP!! itunes doesn't recognize my ipod touch and i've tried everything!!!

Alright, so i got an ipod touch this morning and came home to put music on it. first things first, it read it as a camera. i downloaded the new version of itunes and that seemed to take care of that problem. I tried everything on the apple website to try and fix the problem but it just won't read it. It works fine on my mom's computer but all my music is on this computer. what can i do??

Ok people after messing up three days with my jailbroken ipod touch cauze my itunes didn't recognize it i figured out that the problem is first windows recognized it as a imaging device o as a camera, i found in the device manager was listed mi apple ipod under portable devices and there was the problem it has to be listed under universal serial bus controllers named as a apple ipod so this is what i did but first make sure u have correctly installed itunes and the apple mobile device support:
1 open the device manager or windows button + r is run and then type devmgmt.msc
2 look for the portable devices and find the apple ipod or wherever that is listed on your pc.
3 once u find the apple ipod do a right click on it and click on uptade driver software
4 take the manualy opcion or browse on my computer and then look for this folder on your computer C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
there should be the driver that itunes recognize and your windows wont recognize your ipod as a camera again but i repeat u have to make sure u have installed the apple mobile device support u can get it by extracting the itunes+quicktime package using winrar. so click on update or next what ever on the update process and next time itunes will open your ipod for sincying thanks to forums ilounge.com

One item doesn't recognize me as owner, and I cannot erase it

Similar Messages

Maybe you are looking for