One JACK server for multiple users

It seems that support for JACK_PROMISCUOUS_SERVER has been removed, so JACK only allows programs to connect which were started by the same user who started the JACK server. Is there another way to tell JACK to accept connections from other users? Or do I have to start two servers (one for each user) communicating via the local network?
Why I'm asking:
My browser is running with the permissions of the user "browser" to prevent malicious code executed by the browser to seriously affect my files. This leads to the problem that audio playback in the browser is rendered mute, as it cannot connect to the JACK server that has been started by my main user account.
Any ideas on how to make this work?

I don't think this was ever "supported". I somehow assume that the hack still works (with JACK_PROMISCUOUS_SERVER) but I have yet to go back to it since the last discussion about it. According to Torben H. (read the last few messages of that topic) it should work.
NetJACK works in a different way and allows different clients to connect, AFAIK. It has been suggested that some form of this exact functionality can be used in lieu of the promiscuous trick for JACK itself.
Anyway, for MPD, you can try the alternative setup.

Similar Messages

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

One skype number for multiple users in Skype Manag...

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
If so, how do I go about it?
I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
7.5 Online Numbers for incoming calls
You can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time.
7.5.1 Adding an Online Number to your SIP Profile
Shows you how to setup such
Thanks,
Kent C.

One skype number for multiple users in Skype Manager

Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
single SIP Profile if you wish. In other words, you may have multiple business accounts
and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

How do I set access to the same network share on a Windows server for multiple users on an iMac (school set-up) in Lion 10.7.3?

We've got them authenticating/binding with AD (after hours of troubleshooting to get working), and their Home drive on the Windows 2003 server loads in the dock, but they also want to be able to load the same network shares on the server e.g. "Students$" for every student that logs onto the iMac. I realise without Lion server we can't control it by group, but if we could at least set it up consistently for the students that would be a great start.
Thanks.

When you install you get the opportunity to install it for "All Users".
It sounds like you have a demo version on your Mac however, you need to delete it:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Peter

One TREX server for multiple Portals?

I have the same requirement as that contained in this thread:
TRex for Multiple Portals
I wonder if anyone can technically elaborate a bit what the procedure for this configuration.
I would have to install a TREX and create a TREX instance for each Portal that I want to give TREX service?
Each instance points to a different host?
My requirement is to use the same TREX to both DEV and QA Portal hosts.
Any suggestions would be appreciated. !!
regards,
Leandro.

Hi Leandro,
For your requirement this document describes the TREX installation -
[TREX with Multiple Instances|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/78df2a46-0a01-0010-ef81-a6be60cc5cfd]
Hope this helps,
Reward points if helpful
Regards,
Shailesh Nagar

HT4519 How do I use one smtp server for multiple accounts?

I have 5 email accounts on my iPhone.Though they are different providers, I've been using the same smtp server. To simplify my life, I'd like to delete 4 servers. However, each is considered a Primary server and is undeletable. How do I get around this?

Direct your downloads to Users-Shared

How do I use one downloads folder for multiple users?

I recently added my girlfriend a profile in my Imac. We both have seperate Profiles and logins however I would like to find out, if the the Downloads folder can be used by both profiles. I found that each profile has their own Downloads folder, and goes to their own locations.
I would like to find out, if its possible to re-direct my downloaded files as well as her downloaded files into just ONE "Downloads" folder. The default destination of the downloads folder would be /users/girlfriend(name of girlfriend). I want to change it to /users/(me) so that all downloads would just go to one folder.
Thanks in advance!

Direct your downloads to Users-Shared

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

Can i install itunes multiple times on one computer for multiple users?

Can i install itunes multiple times on one computer for multiple users?

Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same Citrix server

Hi,
In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same time. However I have found an article according to which it says it is possible. Could you check it once and let me know if this article can be used for implementing the requirement stated above as this link clearly indicates that Adobe Acrobat is supported on Citrix.
Please find the link below where it states it is adobe acrobat is supported in Citrix for multiple users.
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html.

1. What is the Acrobat feature that you mean? There's nothing specific to SAP included with Acrobat.
2. Yes, some Terminal Server configurations appear supported (check carefully). All users of the terminal server will need a license, so far as I know - total licenses = total individual people using.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Template Builder (BIPublisherDesktop.exe) installation for multiple users

Hello,
I tried to install version 10.1.3.4 of the template builder on a Citrix server (Metaframe 4.0) running under Windows 2003 SP2, and with Office 2003. Framework .NET 2.0 and JRE Sun 1.6 are also installed.
It works, but, in Word 2003, the "Oracle BI Publisher" menu is only available for the user who have made the installation. Other users can"t see it ?
I have monitored the registry during installation, and most of the keys are created in HKEY_CURRENT_USER, explaining why others can't see it.
Is there a way to make one install available for all users ?
Thanks.
Edited by: user528106 on 27 janv. 2009 01:31

Yes Rainer... I got the problem just now...
Thanks for the reply...
Regards,
Amit

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Setting up accounts for multiple users

Suggestions for allowing multiple users to access one account to avoid having to reimburse folks for every download on their work iPads?

short answer, no. Mail.app does not have support within itself for multiple user accounts. It displays the messages from the mailboxes of the user that is currently logged in. so if you want multiple people to read their mail on the same mac without being able to read other users' mail, you will need to set up multiple user accounts. alternatively, use another client. i think thunderbird supports multiple mail accounts under the same user account. hope this helps.

One JACK server for multiple users

Similar Messages

Maybe you are looking for