One job with two steps - how to create one single spool?

Hello experts,
I have created two queries in SQVI. One is based on the table BSIK, the other on on BSAK.
The report layout is the same in both queries.
Now I schedule one job in SM36/SM37 with two steps corresponding to my queries.
I want my second step to append the spool created in the first step. Is that possible?
In order to do this I unchecked "New spool request" in the request attributes for the second step of the job.
I use the same printer, the same format (X_65_80), but it doesnt work.
The help on the field says
".... name, output device, number of prints and the format must match..." - What "name" do they mean?
"In addition, the existent spool order must not already be competed. This can occur if a spool is released for output...." - I use "send to SAP spooler only" option, is that what thay mean? How cen you have an "uncompleted spool" in the job.
If anybody knows ho to do this (without development!), please advise
Best regards,
Fatima

Hi,
Please do following steps :
1. Go to transaction code SM36
2. Do as per below screen shots
You can see Job steps is empty
Click on (Check and Save)
Next Screen
You can see one step created
Click on Create
You can see above it is showing as Step 2
Give again program name and variant
Click on (Check and Save)
You can see two steps are created
Go back (green arrow)
You can see know SAP is showing 2 Step(s) successfully defined which was earlier blank
Click on
Next Screen
Now schedule job as per your requirement.
Prerequisite create variants for both the programs as we need to mention the same .
Hope, this solves your issue else revert.
Regards,
Tejas

Similar Messages

We have one computer with two users how do we use the home sharing icon if it disappears and we can't have itunes on both at the same time

my dad just got an ipod touch and we used to share one user name and he wanted his own, now he wants to get his songs from my user to his without using CD's, i want to use the Home Sharing, but when i try to the icon disappears and i don't know how to use it.

With Firefox 23 and TabMixPlus 0.4.1.0 installed, an additional box is added to the Tabs options panel that allows 3 options for the tab bar:
*One is to '''Always''' hide the tab bar. I do not know whether future versions of TabMixPlus will remove that option. I have tested in Firefox 23 and it is possible to completely hide the tab bar regardless of the number of tabs open.
Other options added in the additional box with TabMixPlus 0.4.1.0 are:
*Never
*When I have only one tab

HT201317 How do I use ICloud Photo stream on one computer with two differenet Apple Id's. My husband and I each have seperate ID's but one computer.

How do I use ICloud Photo stream on one computer with two differenet Apple Id's. My husband and I each have seperate ID's but one computer.

You have to have an iOS device (iPhone, iPad, iPod Touch) or Mac to create an iCloud account. However, if you tell your friend to create a shared photo stream and turn on Public Website, he/she will then be able to send you a link that will allow you to view the photos on the internet using your web browser. You would not be able to comment on the photos as this requires an iCloud account, but you would be able to view them.
You can refer your friend to this link for assistance with this: http://help.apple.com/icloud/#mmc0cd7e99.

How to replace one char with two chars in email address policy?

I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'.
So, how do I replace one char with two chars in email address policy?

As far as I know, your only solution is to manually create such addresses instead of using e-mail address policy.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

How to manage one library with two accounts

how to manage one library with two accounts

you can only be logged into one account at a time on the iTunes store. However, you can authorize your computer for both accounts, making your computer work with both. In the menu bar just click [Store > Authorize Computer]

How to share one laptop with two iPad for iTunes acc

One laptop with two iTunes acc...

It's possible. You just have to be very diligent about signing out of one account to use the other.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

You have to select one or the other.
Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
Peter

Schedule a Job with multiple steps via ABAP Program

Hi Friends,
I want to create a report(Ex: ZREP) that will run another program(Ex: ZPGM) in background. What I need to do is, when I execute the report ZREP it should run the ZPGM automatically in background. This background execution should happen through JOB with multiple steps.
Why i am mentioned steps is, i have 1000 records in ZTABLE and need to execute 100 records each in one step and need to proecess in ZPGM with selection parameters. So in my case my job should create with 10 steps and need to execute in sequential manner.
FYI, In the ZREP selection screen i need to enter the records count/ interval to derive the job steps.
Please guide how to go ahead? Thanks in advance for all the help.
Regards,
Raghu.

Hi Raghu,
You can try the following pieces of code:
Loop at gt_table.   "This table contains 100 records previously appended
w_jobname = c_job_emision   "Job Name.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = w_jobname
      IMPORTING
        jobcount         = w_jobacount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
* Perform or create T_SELTAB with parameters options
PERFORM Create_seltab_table.
*Call second program.
SUBMIT ZREP WITH SELECTION-TABLE t_seltab AND RETURN.
*Close Job.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = w_jobacount
        jobname              = w_jobname
        strtimmed            = c_x "Immediate Start
     EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
Hope this helps.
Regards
Ernesto
PS: Raymond Giuseppi was faster.
Edited by: Ernesto Caballero on Mar 10, 2010 1:57 PM

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

I have a Mac Pro tower with two internal Hard Discs, each one 2TB. I purchased a 3TB Time Capsule. But it does not allow me to back up because it says there is not enough back up space available. Between the two HDs there are 3.3TBs. Can I daisy chain TC?

I have a Mac Pro tower (OSX version 10.6.3) with two internal Hard Drives, each one 2TB.
I purchased a 3TB Time Capsule. But cannot back up because it tells me there is not enough space.
I have more than 3Tbs to store to the new TC.
Can I daisy chain two TCs to store the 4TBs?
How can I back up only the internal HD that is already full, without backing up the other one?
How can I do back up using Time Machine to back up the 3.5Tbs?
Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?

Can I daisy chain two TCs to store the 4TBs?
No, you cannot link to produce a single large partition.
But you can have two separate backup jobs.. and use each partition. That is hard on TM but you can easily get a different backup software for it.
How can I back up only the internal HD that is already full, without backing up the other one?
In TM you do a different setup and exclude the other drive.
But it is better to use an alternative software IMHO.
How can I do back up using Time Machine to back up the 3.5Tbs?
You would need to use a network drive of more than 4TB .. it would also take forever. This is just wrong way to do it. Although you can buy a NAS that will work with Time Machine and load it with disks 16TB is possible.. if you can get a second mortgage.. the fragile nature of TM on 3rd party devices.. would leave me in cold sweat if anything went wrong.
TM is excellent at keeping incremental backups of files that keep changing.. as such you should use TM to backup your OS disk and main user directory.. exclude all files and directories that never change. Back them up separately.
Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?
Yes, that is a much better idea. You want to store photos safely and you want to store them in multiple places. If you have multiple TB of photos, dedicate a couple of disks to the backup. ie have at least two copies.. not in backup format.. in straight copy format if possible.. so you can keep one of the disks offsite.
I would be using your MacPro internal disk access, to place the disk onto sata bus and do the copy disk to disk direct. Or even buy esata card.. or sata to esata converter cable so you can use esata box. That will beat any other transfer speed except thunderbolt for which you would need third mortgage. (The MORT in mortgage is significant).
The great jurist Sir Edward Coke, who lived from 1552 to 1634, has explained why the term mortgage comes from the Old French words mort, "dead," and gage, "pledge." It seemed to him that it had to do with the doubtfulness of whether or not the mortgagor will pay the debt.

I need to share my Itunes library on one computer with two user accounts

I have one computer with two IPODS. I would like to share the music I already have stored on one library with another user library. How do I do this?

See if this helps: iTunes - How to share music between different accounts on a single computer
There are a few different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

How to create one GR document for mutiple Purchase orders

Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.

Dear Tanuj,
Both Rama & Stephen are correct.
You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
In MIGO, after putting the PO press,enter, again give the next PO of that vendor .
If this solve your problem, close the issue.
With Regars,
Krishna Reddy

How to Create one more SOA-INFRA under the same domain in weblogic server

Hi All,
Can anybody can guide how to create one more soa-infra under the same domain. In order to maintain my composites to be deployed into
different domains, I need to create one more soa-infra and deployed all the composites under that one.
Please let me know if any demo is available for this activity to be gets completed.
Regards,
CH

Hi Vijay,
There are several composites which needs to be deployed and maintained in the server. So, we I'm trying to maintian
by deploying composites into 3 different SOA-INFRA's so if one is not accessible, we can look into it and others can access the
composites from another SOA-INFRA instead of creating domains.
Let me know what will be feasible way to perform this activity.
Regards,
CH

One job with two steps - how to create one single spool?

Similar Messages

Maybe you are looking for