One Keynote slide + one 7.4 MB mp3 exported to QuickTime = 110.2 MB MOV ???

OK... Title says most. Combining a single Keynote slide with a 7.4 MB MP3 and exporting to QuickTime is giving me a HUGE file of 110.2 MB.
Same slide, same MP3, exported to Flash yields an 8.2 MB SWF.
What's up with that??
I just want one slide to open up in full-screen, and click to play one song with the slide... and a file small enough to email.
Any suggestions?

Ok, the magic key seems to be a Custom frame rate of 0.01. With a frame rate that low, I'm getting file sizes of just larger than the music file. Set Keyframe and Data Rate to Automatic.
The reason why this doesn't happen with Flash is because flash does things the way iPhoto does. Display one static image and leave it there until it needs to change. Keynote COULD do that with QuickTime, but it doesn't
Also, if that H.264 gamma change is causing you problems, I just found you can use PNG. Make the same change to the frame rate (you don't have to alter anything else for PNG) and you get a file just a skosh bigger, but closer to your original colors.

Similar Messages

How do I move from one keynote slide to the next with ios8?, How do I move from one keynote slide to the next with ios8?

I don't seem to be able to move from one simple keynote slide to the next.
I just have text on each - like notes for a presentation.

Howdy tommmy,
To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
Keynote for iOS (iPad): Touchscreen basics for Keynote
Tap
Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
Thanks for using Apple Support Communities.
Best,
Brett L

How do I move from one Keynote slide to the next in ios8

I don't seem to be able to move from one simple keynote slide to the next.
I just have text on each - like notes for a presentation.

Howdy tommmy,
To go to the next slide in a Keynote for iOS presentation, tap on the screen with one finger. See this article for information about gestures in Keynote -
Keynote for iOS (iPad): Touchscreen basics for Keynote
Tap
Using one finger, quickly and firmly touch the screen and then lift your finger. Use this gesture to select an object or activate a button. You also use this gesture to advance to the next slide when playing a presentation.
Thanks for using Apple Support Communities.
Best,
Brett L

6 minute Keynote with video clips keeps crashing when Export to Quicktime?

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

Layering video clips in one keynote slide

Question here for Keynote experts:
I'm trying to do something I'm not sure Keynote is capable of. At least, on the face of it it is, but in reality it doesn't seem to work. I have two video clips I'm trying to blend together seamlessly. The second begins with the same still image the first one ends with, so moving from one to the other shouldn't be noticeable. I tried putting them as slides that dissolved between the two, but KN insists on dipping to black between them. To combat this I did a little reading and seemed to learn that, like pictures, I could put the videos one atop the other, then adjust the build order to have them dissolve in the middle. KN will let me do this process, but when it comes to playback it only plays the video on top, then moves on to the next slide.
So, my question is, am I simply asking too much of KN, or is there another trick to this I could exploit?
Just in case anyone's wondering, the reason I'm doing this is because I'm building an award show presentation using video assets from After Effects and Premiere, the plan being to limit the Keynote-y element. Really I'd rather not use KN at all, but as these kind of events are subject to delays, over-runs etc, I have to ensure I have control over the timing, so delivering the assets through something like KN is the best option I'm aware of.
Thanks in advance for any and all help!
F

CLOSE. First of all THANK YOU. Here's where we're at right now--I'll narrow the focus as much as possible.
To assist, I"ve uploaded some images of my slides to my flickr site:
http://flickr.com/photos/ericnentrup/
It's the KEYNOTE Photoset on the left.
The layout has been done in Keynote (yes, I'm pushing boundaries). Hierarchically, there's a Product Line Page (Slide 1 on flickr.com) with a link to each of 6 products. On each of those Individual Product Pages (Slide 2), there are a list of features (8-14 depending), all linked to another static slide with a description of that feature. At the bottom of the Feature list is a link to a slide (Slide 3) that shows THAT PRODUCT in action--a 640x480 mp4 video I spit out of Final Cut Pro. In Keynote, there's a button at the bottom of the slide ('Click here to close") with "link enabled to last viewed slide" that returns it to "Slide 2". When in presentation mode, and with the video playing, it lets me click the button, interrupt the video wherever it was at, and return me to the previous slide.
But when I export to QT, I can NOT override the playing of the video, and am captive, having to wait for it to play out. This is a non-negotiable with the client and about to do me in.
Off to see them now for a bit...I'll be back later this afternoon...you can iChat me at [email protected]!
Thanks Kyn!

Keynote 06 - Exporting to Quicktime

Okay, so I know how to export keeping the audio intact.
My main problem is keeping all the timings I've created intact as I don't have ANYTHING happening "on click" in my presentation. It is all timed and I'm finding the delay between slides is too long (when one "ends" and the other "begins").
Thus my question:
Using Keynote 06 ... how do I export into Quicktime KEEPING all my timings intact ?

This version doesn't have the recording function --- http://grab.by/3QBb
Thus I cannot do that work around ... anyone got any assistance on offer ?
Should I just give up and save it as a presentation not try to export to Quicktime (make into a movie)

Keynote export to Quicktime = blank white screen

We have Keynote 4.0.1. We have a slide show that plays perfectly, but when we Export to Quicktime, the resulting movie has a blank white screen and our music track, but no narration and no graphics.
Any clues?
Thanks!

From your description your problem may be that you have QuickTime video embedded in your Keynote document.
QT video will play normally in a Keynote presentation, however when you export the Keynote presentation to a QT movie, the video will be blank. This is a long-standing issue with Keynote and the 4.0.2 update does not fix this problem.
There is no workaround using Keynote only.
You can export the graphics portion of the Keynote presentation to a QT movie and then embed that movie in a video editing program such as Final Cut Pro (I don't believe iMovie is up to the task). Once you've assembled all the pieces--the Keynote presentation, your narration, and whatever else--you will then be able to export to a QuickTime movie.
msq

Keynote 6.5 Loses Ability to Copy and Paste Master Objects (Titles, Body) From One Master Slide to Another

This is just a major pain point that I hope is fixed as soon as possible.
In all Keynote 6 versions of the past (and 5), you were able to do the following:
1) Copy a Title or Body object (with proper formatting) from one Master Slide to another.
1a) The slide you would paste it into would have had to have been deleted/unchecked.
2) The pasted Title and Body objects would then assume the role of the Master's Title and Body Boxes
Now:
Instead of assuming the role of the Master Slides Title and Body Boxes, they are simply text box objects. If you were to check "Title" or "Body", the old objects (with probably improper formatting) would still be that slide.

Below is the EtreCheck report. If Needed I am willing to make a screencast of the problem.
Problem description:
copying and pasting elements on masterpages in Keynote doesn’t work.
EtreCheck version: 2.1.8 (121)
Report generated 9 februari 2015 17:56:13 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery Health: Normal - Cycle count 235
Video Information: ℹ️
    Intel Iris Pro
    NVIDIA GeForce GT 750M - VRAM: 2048 MB
        Color LCD spdisplays_2880x1800Retina
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 5:43:37
Disk Information: ℹ️
    APPLE SSD SM0512F disk0 : (500,28 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 400.00 GB (133.37 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 99.42 GB (49.66 GB free)
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) [Click for support]
    [loaded]    com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
    [not loaded]    com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) [Click for support]
    [not loaded]    com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [not loaded]    com.splashtop.streamer-for-root.plist [Click for support]
    [running]    com.splashtop.streamer-for-user.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
    [running]    com.splashtop.streamer-daemon.plist [Click for support]
    [loaded]    com.splashtop.streamer-srioframebuffer.plist [Click for support]
    [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
    [loaded]    net.telestream.InstallToLibrary.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Programma (/Applications/Dropbox.app)
    Google Drive    Programma (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 4.1.0.0 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    Picasa: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    LastPass
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    SwitchResX [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         6%    WindowServer
         1%    fontd
         0%    Google Drive
         0%    SystemUIServer
         0%    Core Sync
Top Processes by Memory: ℹ️
    1.20 GB    Adobe Photoshop CC 2014
    1.08 GB    Adobe InDesign CC 2014
    515 MB    Finder
    429 MB    firefox
    241 MB    WindowServer
Virtual Memory Information: ℹ️
    5.82 GB    Free RAM
    7.91 GB    Active RAM
    2.02 GB    Inactive RAM
    1.42 GB    Wired RAM
    2.71 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 9, 2015, 12:33:36 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Splashtop Streamer_2015-02-09-123336_[redacted].crash
    Feb 9, 2015, 12:12:22 PM    Self test - passed
    Feb 9, 2015, 11:57:53 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Splashtop Streamer_2015-02-09-115753_[redacted].crash
    Feb 9, 2015, 09:48:33 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Splashtop Streamer_2015-02-09-094833_[redacted].crash

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

Is it possible to import slides from one Keynote presentation into another. If so how do I do it on iPad 2?

You do it sort of like the way you arrange your apps on the iPad and how you drag apps into groups. You do the same technic with your Keynote slides.
Look here......http://support.apple.com/kb/PH1360

Multiple fill blank objects on one question slide?

Hellou CP users, is it possible to put multiple fill blank objects on one question slide? And if, how can I manage them for quiz reporting and correct results?
Yarik

I think indeed that you want a score for each fill-in-the-blank object, and that is not possible with the default FIB question slides. Only MCQ has partial scoring.
With TEB's and advanced actions that is possible. Also with the TextArea widget, as I explained in this blog post:
http://blog.lilybiri.com/widgets-and-custom-questions-part-2
http://blog.lilybiri.com/extended-textarea-widget-more-functionality
TEB's have the advantage that as interactive objects, you can attach a score to them which is not the case for the TextArea widgets. But I would recommend getting Jim Leichliter's enhanced version of the TEB's as well, so that you can control what is shown in the TEB if you want to create a question with multiple attempts. I have described a use case recently in these forums but cannot remember exactly which thread. Jim's widget is free:
http://captivatedev.com/2012/09/16/adobe-captivate-6-x-free-widget-text-entry-box-with-var iables/

Can i buy one keynote for 2 different Macbooks ?? or i should buy it twice ??

can i buy one keynote for 2 different Macbooks ?? or i should buy it twice ??

This depends on how you purchased Keynote, read the licence agreement here:
Keynote Licence Agreement

How do I copy an image from one Keynote presentation to another one?

I have a previously saved presentation on Keynote in iCloud. I created it from my desktop at work. Some of the images I used for the presentation I want to use again in another presentation, onlh this time I am working off my laptop and don't have the same access to those images. Is it possible to copy/paste images from one Keynote presentation into another? I can't even seem to click on the image and save it.
Any suggestions?

Clicking and dragging does not work.
Click on the image and Copy and Paste
or
Inspector > Metrics > File Info > click on the icon of the file and drag it to your desktop
You can then drag that file back in wherever you want.
Peter

Problem: Video on slide one continues to play and can be heard in the background, even after the user has navigated to another slide.

Problem: Video on slide one continues to play in the background, even after user has navigated to another slide. This only happens on a fresh reload of the page.
Has anyone else had this problem, or found a solution?
If you refresh the page and start over, the problem doesn't happen. But on the first page load it always seems to happen.
Here is a link to the module I am working with. If you let the video play for a couple seconds on the first slide, and then click a navigation link to another slide, you will still hear the audio from the first slide playing.
http://www.thepettitgroup.com/tn/module_01_unit_01A/multiscreen.html

To clarify - this happens in both IE and Chrome, and is the Flash version of the content.

Recording only creates one blank slide still the case. Please urgent help

Hello,
I am just beginner in activate recording.
I record internet explorer screens or notepad . After recording END button,all records become one blank slide. and No captions kept also
for example
I run the captivate 3
choose record new project
custom size
recording mode:demonstration (used also simulation,custom but no solution)
click on red record button
then after taking some actions on internet explorer or
have PC with the following parameters:
windows XP SP2
2GB Ram
ADI Radeon Xpress 1200 graphic card
AMD Athlon 4050E
I see you that you also proposed some solutions in other threads which didn't help me
http://forums.adobe.com/message/920046#920046
http://forums.adobe.com/message/692744#692744
the actions taken by me below:
have captivate v3.0.1 build 589
I uninstalled flash 10 and downloaded flash 9
or removed all programs in startup with msconfig
resized project without choosing : maintain aspect ratio option
no keylogger or spyware found
disabled hardware accelaration
but nothing helped
Do you have a permanent solution?
Thanks for really quick feedback.
Best regards
Ufuk

Hi Friends,
Sorry for bothering
Could you kindly advise please
Best regards
Ufuk

Multi soundtracks in one keynote

I am doing a keynote in which i need to insert more than one audio file. Is this possible? I tried doing an intro, than I went to the ending and it plays the ending over the intro. NO SH=-T you can't put more than one audio file in one keynote?

You can set the cmdsep variable but it seems just the output of the last statement gets displayed:
SQL> set cmdsep |
SQL>
SQL> select ename from emp | select dummy from dual
2 /
D
X

One Keynote slide + one 7.4 MB mp3 exported to QuickTime = 110.2 MB MOV ???

Similar Messages

Maybe you are looking for