One landscape with different databases releases

Dears,
A customer have MSSQL 2000 installed on your systems DEV and QAS. The PRD system does not installed.
Now the customer need install only the production system, but he want with MSSQL 2005.
Does have problems? What SAP recommend?
Thanks,
Dejalma Rodrigues

Hi,
It is possible to have different releases of DB within a landscape <u>as long as the same release of the SAP application supports it</u>. The end users will not see any difference.
The challenge is support for DB patching if you don't have anywhere to replicate production issues. Not to mention possible issues with different DB tuning parameters and back-up recovery processes.
I would suggest that you <b>at least</b> upgrade the QAS system to SQL Server 2005 too in the short term. The recommendation you will always get is to have all 3 aligned on the same release - that should be your longer term goal.
Cheers,
Mike

Similar Messages

Wifi sync 2 iPhones in one iTunes with different Apple-ID's.

Wifi sync 2 iPhones in one iTunes with different Apple-ID's. My Phone will show up in iTunes, my wife's wont. After plugging my wife's phone into my Win 8.1 pc and check Sync over wifi, I hit the eject button, could this be the reason? Or might it be the different Apple-ID's? If the answer is the first, is there any way tohave iTunes forgetmy wife's phone so I can addit from scratch?

Ello,
I know this, but thats in the past now sadly. The question is: Why wont my wife's iPhone show up in iTunes via wifi?
Is it because I pushed the eject button? And if so, is there any way I can make iTunes forget my wife's iPhone and *** it from scratch again?
Or is it because the phones uses different Apple-ID's?

One Key FIgure in more than one column with different restrictions

Hi,
I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

Hi Pravender Chauhan,
If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
Assign points if Useful.
Regards,
Rajdeep.

Certification of 8iAs with Oracle8i Database release 1.7.4

I would like to know if 8iAS is certified with Oracle8i Database release 1.7.4.
Thanks for your reply.
Alexis

Please see the product cerfication matrices at: http://otn.oracle.com/support/metalink/content.html
OTN

Okay can you have more than one account on one computer with different e-mails

Okay can you have more than one account on one computer with different e-mails

Yes for iTunes....started a new account and when I try to sign in to the store it gives me a message that this id hasn't been used and would you like to review at which time then it tells me your request cannot be completed and to check date on computer and the cookies well the date is correct and not sure what or how to alter the cookies..I turned firewall off and tried that but still no luck...also deleted temp cookies and still having problems..I have been trying to fix this for days and just about to give up any ideas

How to host one application using different database connection on OAS?

Hi,
Jdeveloper - 10.1.3.4
Application - ADF/BC
Oracle Application Server - 10.1.3
Above our the specifications for our application,
We have two database schemas different for development and production therfore we have different databse connections for the two,
we have one application which is in production and enhacements on the same application are done by the development team.
Since we have two different schemas for developement and prduction we use different database connections for the application on development and production.
The problem is our Model and View Controller project are same, only the database connection file changes that's why we are able to host only on application at a time on our OAS. This is probably because the URL generated by OAS for developemnt and prodyction application is same.
Is there a way we can host two instances of the same application with two different database connections on the a single OAS.
Thanks & Regards,
Raksha

Use different deployment profiles each with a different context root for your application?
See: http://one-size-doesnt-fit-all.blogspot.com/2009/02/configuring-separate-dev-test-prod-urls.html

Maintaining formats(layouts) on Crystal report with different database

I was just needing some help maintaining the layout of a report but using a different database. The databases are very similar for example, a field for the database in use is line1xxxx what I wish to do is keep all the formating & point it line2xxxx database. Where line1 is the original Database & Line2 is the new database I wish to use. Both of these databases reside in the same folder its just that I need identical reports for both Line 1 & Line 2 & am trying to get away from duplicating all the work I did on the Line 1 report.
Hopefully not too trivial for this forum.
Thanks in advance.

If you have same tables in both the databases then open the report and go to menu option in the report database-->set data source location and create new connection in the bottom window and select both existing connection from top window and new from bottom and click on update. Now the report points to the new database, so now use save as option to save the report with some other name so that you can have the old report with old connection and the new one with new connection.
regards,
Raghavendra.G

How to do mappings in owb with different databases

hi all,
I have two different databases with in same server one for staging and target.
How to connect both target and staging databses to do the mappings using OWB??
Is it possible?? if possible how to do the mappings??
for ex:
Now i registered my OWB with bcp database for both staging tables and target tables.
now i want to load data of staging tables into bcpsource database and
target tables into bcptarget database seperatly.

10gR2 does have connectors. They were introduced at the same time as locations.
The connection attributes (eg host, port, tnsname) are set against the location, not the connector. A connector simply defines the fact that there is a path from one location to another (eg via a database link). All the connection information remains on the location object.
The process flow packages within a location can each be deployed on their own simply by selecting the location in the Control Center Manager, and setting a deployment action against the package (or by using scripting, as mentioned). However, a process flow cannot be deployed independently of it's package - it's all or nothing.
Nigel.

HT204053 We have two Iphone 4S but we set each one up with different accounts, how can we share purchased or downloaded music from and iTunes card without purchasing twp different cards?

We have two Iphone 4s with different accounts, what would we need to do to share music from and Itune card if one of us purchased and the other did not?

Put all of the music on the computer(s) to which you sync, then sync to your idevices

How to maintain one vendor with differant plants at differant states.

Dear All,
i have one scenario with me in that my client purchasing his goods from one vendor that vendor is having two plants one at mumbai & one at gujarat. Now how i will maintain these two address with the same vendor. Along with that i need to mainatin the tax structure for both in one vendor. While creating purchase order how buyer will pick the tax structure.
Regards,
Nandkishor Nachane

Hi,
You can create one main vendor code and use partne function to add address of different plant location.
regards,
zafar

Create Foreing Key to one table in different dataBase

Hi, I need create a reference to one table in other database. I understand that Database Link can be used to connect me to other database but when I am creating the foreing key in my table, I can see only the tables in the schemas that have my data base not the other schemas. I created a connection with database link but I do not see the form to make reference to this connection from the create table wizard. I am using Oracle 9i and the client is 9.01.01.
Thanks in advance,
Mónica Alarcón

We cannot use tables in another table to enforce data integrity. This makes a lot of sense if you think about what would happen if the remote database goes down.
If you want to do this, then you need to use replication (materilaized view) to bring the parent table's data into the locaL database.
Cheers, APC

Reusability of mapping with different database

Can i reuse the ODI mappings within different database.. like DB2,Oracle10 g, Oracle 11 g.
The table name should same in all the environment.

I am not saying I am 100% correct. As per my interpretation i believe it will work between oracle 10g to 11g. But not sure if it is db2. You might have to change the KM.
Just check with the generic KM. That might help you which normally works with all rdbms.

Two iPods on one cumputer with different songs

I can't find out how to put two ipods with different music on one cumputer and how to put songs on one iPod and not the other. if you know how plz help!

Additional links and help...
Using iPod with multiple computers
http://docs.info.apple.com/article.html?artnum=61675
Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

Running HTML DB apps on one machine with the database on another

I first want to apologize for this question being asked AGAIN.
I have spent the better part of the day reading through a lot posts regarding this issue (and there are a lot). My boss sent me this requirement on a new project that Oracle Forms and Reports run on one server and connect back to the database on another server for security. HTML DB needs to do the same thing.
The question:
I have found out that the DAD file needs to be modified to allow this type of set up to work and the HTTP server needs to be running on that server. He is asking what in the DAD file needs to be changed to allow this to work. Would someone provide me with an example of what would need to be changed?
Also, I'm confused on the implementation of this. Currently all the applications I've created are for "in-house" users. This project is the first (that I've done) that is going to be open to users outside the company. I'm confused on the link that will be supplied to the users. After I import my application into the production database, I run it to get the link and send that to our users. If the application is going to be run from a different server from the database, how is/will the link to run the application be built? I hope I'm describing this well.
Thanks,
Joe

Joe,
You wouldn't have the database server "open to the outside world". All you'd need to have open would be the port for HTTP traffic.
There are two scenarios -
1) Having them both (DB & Apache) on the same machine
You would still only have the HTTP port open. The "fear" is that if the Apache server is compromised then they have access to the database machine.
2) Having them on separate machines.
In this case if the Apache server is compromised then, since by definition, you have a route from the Apache server to the DB server then they can still reach the DB machine from the Apache server machine.
The thing to do here is to ensure your Apache server is patched and secure, regardless of whether it's running on the same machine as the DB or not.
I'd be interested to see what others think.

Restore Rman hotback in different machine with different Database name

Hi All,
I have oracle 11.2.0.3.0 in Windows 2003 R2 server 64 bit version,i have my production database "Proddb" in archivelog mode , I have taken RMAN hot backup at 9 AM and i want to restore this RMAN backup into new Machine with new Db Name "Testdb" at 1 PM ,in between 9 AM to 1 PM lots of transactions happened , lots of archivelogs got generated ..
Can anyone tell me how to restore RMAN Backup in different machine with new Db name and also how to apply those archive logs which got generated between 9 AM to 1 PM.
Thanks & Regards,
Vikash Jain

http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814Yes you will have to apply all those archivelog after yours last backup 9:00 AM to 1:00 PM , someone give you good link to restore the RMAN backup from one machine ot another machine but it is missing one thing which you require is to restore database at new machine with new DB_NAME , for that you can do it in two ways after restoring and recovering the database.
1)After restoring with original name "Proddb" do not recover database ,Create contorlfile in control.txt format using alter database backup controlfile to trace,Shutdown restored database ,delete/rename contorolfile ,recreate controlfile from control.txt which by setting its first line as
Create controlfile set database "Testdb" resetlogs noarchivelogStartup mount with new created controlfile after defining new controlfile in pfile ,recover database at sql using backup controlfile "recover database using backup controlfile untill cancel" supply log till 1:00 PM ,Open database with resetlogs,run at comand prompt
sqlplus "/ as sysdba" @aduplib.sql so2)Or better approach is http://docs.oracle.com/cd/B28359_01/server.111/b28319/dbnewid.htm.
Khurram

One landscape with different databases releases

Similar Messages

Maybe you are looking for