One last crazy thought on wierd email

I've had the same problems as all 6000 posters have had regarding the email issue.
I've restored from backup, restored as new iPhone, reset network settings, removed and reinserted sim card. All no luck. Always the restart to get mail to work. Manual only 3 POP accounts.
Seems highly unlikely that a gazillion sim cards could be bad, BUT, they were all made, and all put into the iphone in China, and perhaps there might have been a bad batch. I am going to try one last thing. Go to ATT, get a new sim card (it's free), let them register the phone and see what happens. I'm not optimistic about this, but the Genius Bar guy today said that some people have had luck with this.
If what I expect happens, the same old problem, then I guess it's wait for 2.01.
I'll keep you posted.
Thanks,
CD3
Message was edited by: CD3

Thanks for the reply JER101, that is certainly interesting. I don't know what the default setting is for the aperture, but I think it is normally set equal to the amount of ram on the card if you have enough system ram to support it. On the other hand, if you only had 128MB system ram and the AGP aperture was set to 128MB, that may be an issue. As I understand it, the AGP aperture allocates system ram as virtual memory when the AGP ram has been exhausted. If this is not correct, please correct me.
Thanks,

Similar Messages

ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!!

I already posted this article in the motherboard thread but seems like this is the best place to post this
ONE LAST HURRAH: Before saying Goodbye to my Beloved MSI Eclipse!!!
Well it has been two months since I purchased this MSI Eclipse SLI board and while waiting for its bigger brother MSI Eclipse Plus, I would like to try out a new board from another manufacturer. Before I pass this board to its new owner, I decided to give it a little review to so that other people who will be upgrading to i7 platform will have some idea how good or how bad this board is.
A few months ago and maybe until now, Eclipse is the flagship board of MSI in terms of i7 based motherboard. Its bigger brother MSI Eclipse Plus has already been sighted in some forums but no definite date yet on when it will be available in the market.
The Box
The size of the box was way bigger than my old P45 motherboards. It is actually almost 2x the size of the conventional ATX board box.
Upon opening the panel on the box, you will see a lot of information about the board! You will also see the added stuff from MSI like the Green Power Genie as well as the awesome Creative Xfi! Yes, a creative Xfi Extreme Audio PCIe sound card was included on the package.
Upon opening the box, you will see a plastic container (I am assuming that this is anti-static) that contains the motherboard, DLED2, Green Power Genie and creative X-fi.
There’s another box that contains a lot of stuff! MSI is as usual generous in giving their customers all the things the need to fully populate the board. This includes the cables needed to populate all the sata and ide slots, cross fire and SLI cable, additional USB bracket, ESATA bracket and the M connectors. All the manuals needed to setup the boards are also included.
The Board and Layout:
The board for me is pretty sexy! It comes with a black PCB. The RAM slots and the other expansion slots are only blue and black in color which is a perfect combination for an intel based platform. The IOH and the ICH10R is actually covered by a copper heatsink with heatpipes connecting them. Well, personally I do not like this design since I do know that x58 generates a lot of heat. The VRMs also come with a copper heatsink but no heatpipe . As far as I understand from the box information, this is MSI’s split thermal design as well as protection from warping.
MSI also provided 6 RAM slots and they come in blue and black sockets. Do yourself a favor by putting the ram in the black slots. I previously ran into problems of the system hanging in “ DDR ini “ and later found out from reading the manual and searching the web that the black slots should be populated first.
The board came with 10 sata ports! 6 of them in 90 degrees are connected to the ICH10 and the 4 are actually by the jmicron chips attached to the board and also function as
HW raid. Connect 2 HDD on sata 7 and 8 or sata 9 and 10, do some stuff in the BIOS and you are all set to run the system in raid 1 (mirror) or 0 (stripe). I have had no chance to test the raid 0 + 1 since I don’t have 4 identical drives. It also comes with an IDE slot for your old parallel IDE HDD and/or ODD.
The expansion slots come with 3 pci x16 slots, 2 pci and 2 pcie x1 which I believe is more than enough to suffice your daily needs. The bottom part of the board came with a power, reset and dled switch along with MSI’s OC jumper.
The back panel is not that good looking. Well it’s the same back panel style of their P45 series board. It doesn’t matter anyway since it is at the back of the chassis and what concerns me the most is functionality. The board came with 8 usb ports at the back, 2 Gigabit lan, 2 esata ports, a 1394 connector, a cmos reset switch and the conventional PS/2 ports for mouse and keyboard.
Bios and overclocking
I just captured the most important portion on the bios which is the Cell Menu. It is the overclocking tab on MSI’s BIOS
Overclocking and Benchmarking Results
Since I have not installed anything yet on my new board, I decided just to compare the stock and overclock result from this board.
Below are the lists of components that I will be using
Intel Core i7 920 2.66ghz ( cooled by Thermalright HR 01 plus )
MSI Eclipse SLI – Beta BIOS 1.45
MSI 8800gtx (well a bit old but still reliable)
Team Extreme ddr3 1600 @ 8-8-8-25 rated 1.65V
Western digital Raptor 74gb 16MB cache
I tried setting up this board one last time on my DIY open system using the components above. And Good thing that my ever energetic and reliable assistant is always there to help … hahahaha
SPI Stock and 4Ghz OC Results
Stock = 15.313s
4Ghz = 10.405s
PC Mark 05 Stock and 4 Ghz OC Result
Stock = 9745
4Ghz = 13136
3DMark 05 Stock and 4Ghz OC results
Stock = 13388
4Ghz = 14289
3DMark vantage Stock and 4Ghz OC Results
Stock = 8160 ( 33530 on CPU score )
4Ghz = 8315 ( 43567 CPU score )
Aquamark Stock and Overclock
Stock = 131812 ( 18685 CPU score )
4Ghz = 179261 ( 23139 CPU score )
I tried playing with bclock since I have seen people in several forum saying that their boards( not specific to MSi eclipse ) / i7 proc cannot go above 200 or maybe just above 200 bclock. After doing some tweak I was able to get 215 bclock and the max I was able to get is 218, All the test that had been done are just after vista installation. No tweaks done on windows.
SPI = 10.343 ( 19 x 215 )
SPI = 10.030s ( 19 x 218 )
Wrap-up / Conclusion
I really don’t want to let this board go but I don’t have extra budget to buy and try new boards from other manufacturer so that I can compare the result. So right now I am stuck with selling this just to buy another x58 board (of which I will try to post a mini review soon)
I did encounter IOH temperature issue when I first bought this motherboard. IOH temperature is at 65C and this still goes up while running benchmarking tests. I made minor modifications on the board and as far as I know, it did not void the warranty. Below are the modifications that I have made:
1.   Removed the violet thermal paste that MSI used and replaced it with Artic Silver 5.
2.   Removed the plastic pushpin and replaced it with a bolt and plastic nut.
3.   Added a 40mmfan that is just enough to take out the heat from the IOH
Guess what, the temperature after these is just below 55C even under benchmarking (done during night time and I would expect that this will go to probably 60 degrees during daytime given the tropical climate in the Philippines).
I was able to overclock my i920 at 3.6ghz without even adjusting anything on the voltages. Meaning they are at stock settings! I managed to reach 4.0 ghz by simply adding 0.040v (around 1.29 Vcore only)
Pros
-   Easy to overclock board
-   Supports both SLI and crossfire
-   No issue on bigger after market cooling
-   90 degrees placement of ICH10’s sata port
-   Server grade VRM’s and Capacitors used
-   Creative Xfi included
Cons
-   Only one SLI bridge included. It would have been better if a tri SLI connector was given by MSi.
-   IOH temp an issue for my board. Need to monitor and maybe try my modifications.
-   Power/Reset/DLED Switches location will not be accessible if a 3rd video card is installed.
Other thoughts
-   It would have been better if the BIOS of the eclipse comes with nominal values on the Cell Menu. This is to serve as guide for the users if they are trying to alter the voltages.
-   Maybe swap the ide and the sata 7 to 10 ports? It is better looking if all 10 sata ports are on 90 degrees. It will also ensure that even if you use 2 or 3 video cards, it will not hit any of the sata 7-10 cables if you use them.

I can see you got your use out of it. I hope the new owner tortures it, too!

One last question about Apple IDs

I thought id asked the lot but there is one last question. How does one delete an Apple ID?
Many thanks again
Anthony

Hello Again Anthony!
"How does one delete an Apple ID?"
You can't.
After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
ali b

Thanks for the idea. One last question..

Thanks for the replies, setting it to passive seemed to work
as I can now upload to my host. Just one last question, I've
searched the video knowledge base looking for a video on how to use
the 'Starter Pages' within Dreamweaver to no avail. When I try I
always get the same message: 'Dreamweaver stores templates in the
root folder of a site, but there are no sites defined. Please add a
site.' I have my site all layed out in Dreamweavers FTP, I can
upload and download with it and still Dreamweaver gives me this.
Any ideas?
Thanks once again all

Using FTP & RDS Server for your site means that you will
not be able to use
DW's Templates or Library items. It's usually a very bad
idea, to boot.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"John Waller" <[email protected]>
wrote in message
news:g1a9mi$qtn$[email protected]..
> F1 Dreamweaver Help files
>
> Working with Dreamweaver Sites > Setting up a
Dreamweaver site
>
> --
> Regards
>
> John Waller

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

HT1349 When the tech set up my new iPad last week, I can get email on IT, but now I can no longer get email on my Mac laptop. How can I correct that? Tish

When the tech set up my new iPad last week, I can get email on IT, but now I can't get email on my Mac laptop. What's wrong? Tish

It could be a POP account which means the first device which accesses the account gets the email unless the settings have been changed. Here are links to show what is involved. It may not mirror your circumstances though.
http://support.tigertech.net/outlook-2007-lmos
http://email.about.com/od/outlookexpressbackuphelp/qt/et_server_copy.htm

HT1727 my itunes account was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it is not. Can anyone h

My itunes aacount was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it's not. Can anyone help us?

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

Why does my iphone send all text from only one of my contacts to my email?

Why does my iphone send all text from only one of my contacts to my email? I'm curious to know if anyone else has had this issue with the Iphone 5s...

imessage has a new setting that shows all emails associated with your apple id. There are two sections, send and receive. Since you are using the same apple id, Im sure if you adjust one of those settings to your mobile number instead of your appleid, it wont send double.
You might also have to adjust your wifes settings too, so those emails dont overlap

TS3276 One person does not get my email

I am able to send and recieve email from everyone in my address book except one. I have checked the email address.; delted and re-entered still no dice. Any ideas why this person can bot recieve my emais.
Thanks
dc

Welcome to Apple Support Communities.
It might not be anything on your end.
Here are some overlapping possibilities, all on the receiver's end:
1) Spam filtering, restricting incoming messages from certain domains know to pass lots of spam (Hotmail, Yahoo)
2) Corporate or personal firewall restricting incoming messages to certain 'trusted' certificates and/or domains and rejecting all others.
3) Anti-virus or similar filtering detecting a suspicious 'signature' in emails and/or attachments sent from your domain or your computer.
4) individual email account rules for filtering, accepting, or rejecting messages, based upon content filtering applied to your message
     sender's actual name
     sender's published name within the email
     some keyword(s) or phrase(s) contained in the subject line of your message
     all messages with attachments
     messages with attachments larger than a certain size
     messages with attachments of a certain type
5) The receiving email account might be marked 'exclusive', meaning that it will only receive email from people/organizations already in the address book or otherwise marked as 'safe'.
6) You might have a name or organization that unfortunately contains part of some blocked word, for example 'Shelly' contains 'h*ll'. 'Matsushita' contains 's*it', 'TheBitChurner' contains 'b*tch' and so on.
7) Be absolutely certain that you have not transposed any letters. For example, I have an acquaintance whose name is Shelia (pronounced 'sh-LEE-ah', not 'SHEE-la'). For the longest time, I misspelled her name 'Shiela' in her email address, so she was not receiving my emails.
Never discount the possibility that they might be ignoring you on purpose!

How to replace one char with two chars in email address policy?

I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'.
So, how do I replace one char with two chars in email address policy?

As far as I know, your only solution is to manually create such addresses instead of using e-mail address policy.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

One last question - default...

Okay, now that i've got my new AEBS on the net and printing wirelessly, one last thing is bugging me. Whenever i put my iBook to sleep, upon wake up, it always selects my neighbor's wireless network, and not my new AEBS. The neighbors (our friends) haven't secured their network, so my mac can join without a problem. But it will select it even though the new AEBS's signal is much stronger! Is there a way that i can ensure it selects our base station first over any other networks?
Cheers,
brige
iBook G4 1.42ghz 14" Mac OS X (10.4.4) iPod Mini 6ghz, iPod Nano 4ghz

Try the following:
1. Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
3. Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone is hacked my iCloud account?

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone has hacked my iCloud account?

Hello Corinne Craven,
Thank you for using Apple Support Communities!
You can update the name on your Apple ID here:
Appleid.apple.com
If you suspect unauthorized access to your apple ID I would normally recommend resetting your password, but you have already done this.
Here is some information about 2 step verification which is another level of security for your account.
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
Be sure to read all the information in the article if you choose to use two-step verification.
Take care,
Sterling

I am getting the message that my email password and/or username is not correct. It is correct! I am the only one who cannot send or receive emails...I am the only one using a mac.

I am getting the message that my email password and/or username is not correct. They are both correct! I am the only one who cannot send or receive emails...I am the only one using a mac. i use mac mail and it is my companies server. I took my computer and iPhone to the Apple store...4 hours later they said that couldn't figure out why it wasn't working. Any suggestions???? I am also not able to log into the C-Panel...

Same here! Happened yesterday to me on New iPad and iPhone 4S. On iPad I managed to correct it by removing the account and activating it again as an Exchange account...I have mail and calendar OK!
On the iPhone nothing seems to work!
Facts:
1. everything worked perfectly for years!
2. I have the 2-step authentication deactivated on my google account so it cannot be this one.
3. On desktop everything works just fine, on iPad everything is OK with Exchange account added (after Google removed support for Exchange account access I CAN ONLY HAVE ONE DEVICE with Google Exchange account, so doing the same on the iPhone does not work!)
4. Tried to remove and add the account again - no results.
5. Tried to remove and add as Google, as Exchange, as Other account - I get calendar but no mail!!!
6. Tried to reboot between remove/add accounts - no results.
7. Tried to ("reset settings") reset the device - no results.
8. Tried to add as POP account and I it worked - I get mail but I do not need POP as I am using zounds of mail with labels and need to be working on an IMAP account
9. To make things even more complicated...I have another account which works perfectly!!!!!
Anyone out there having a clue?

My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

My iPod used to be signed in with my moms apple ID but now I have my own. When I opened IMessage it wanted me to sign in, but on the last step it said, "your email can't be verified since its already in use" please help I want to use IMessage.

Hi Kanemelinda8833,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Also, make sure you have signed out of your Mom's Apple ID and are signed in with your own Apple ID on this device.
Click on the link to see more details and screenshots.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Sign out of your Apple ID on all iOS devices, in the following locations:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Sign in to your Apple ID on your device.
When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At
Cheers!
Judy

One last crazy thought on wierd email

Similar Messages

Maybe you are looking for