One last question on the FCP 4.5 and 10.4.9 mess....

Ok, I did the upgrade to 10.4.9 without checking here first too. Big oops! Couldn't capture either. Since then, I've done an erase and install and installed 10.4 back onto my system
I've updated to 10.4.8, gotten all my programs installed, and everything is peachy.....
.....except for quicktime 7. I cant install quicktime 7.1.6 unless I have 10.4.9. I've tried finding a 7.0 installer all over the internet and in these forums but the links I've found are all dead.
Any help please! iTunes video won't work without quicktime 7. I need to see The Office!
Power Mac dual 2.5 Ghz G5 Mac OS X (10.4.8) 2 gigs RAM, 2 250Gb internal hard drives,FCP 4.5, Motion 1, DVDSP 3

Try here:
http://discussions.apple.com/thread.jspa?messageID=4417365&#4417365
Alberto

Similar Messages

Thanks for the idea. One last question..

Thanks for the replies, setting it to passive seemed to work
as I can now upload to my host. Just one last question, I've
searched the video knowledge base looking for a video on how to use
the 'Starter Pages' within Dreamweaver to no avail. When I try I
always get the same message: 'Dreamweaver stores templates in the
root folder of a site, but there are no sites defined. Please add a
site.' I have my site all layed out in Dreamweavers FTP, I can
upload and download with it and still Dreamweaver gives me this.
Any ideas?
Thanks once again all

Using FTP & RDS Server for your site means that you will
not be able to use
DW's Templates or Library items. It's usually a very bad
idea, to boot.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"John Waller" <[email protected]>
wrote in message
news:g1a9mi$qtn$[email protected]..
> F1 Dreamweaver Help files
>
> Working with Dreamweaver Sites > Setting up a
Dreamweaver site
>
> --
> Regards
>
> John Waller

One last question about Apple IDs

I thought id asked the lot but there is one last question. How does one delete an Apple ID?
Many thanks again
Anthony

Hello Again Anthony!
"How does one delete an Apple ID?"
You can't.
After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
ali b

Canon HG20 One Last Question

Before I buy my Canon HG20, I have one last question.
I have seen warnings various places on the net about having a powerful enough computer to work with the data produced by this camera.
I have an iMac 24 2.16 2GHz Intel Core 2 Duo with 2 MHz Memory, NVIDIA GeForce 7300 card, running OS X 10.5.6 with FCE 4.0.1.
Am I OK?
Thanks,
Jim

That is a perfect machine for AVCHD editing. i use a puny Macbook and I have experienced no problems, everything is very fast. To work with AVCHD, you need an Intel processor and to have at least FCE4. 2GB of RAM is also a good idea to have (I assume that's what you meant you had when you said you had "2 MHz Memory"). From what you have said of your specs, I can't foresee any problems. If a Macbook can do it well, you can expect an iMac to do it amazingly.
Enjoy your new camcorder, I definitely am pleased with my HG21 (basically the same thing, just more memory and a viewfinder).
Message was edited by: skalicki`

Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
And tips on how to reinstall without messing things up?
last question is, does my recent files and saves work after the reinstall?
Thank you

karianne wrote:
I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
Which versions? Which operating system?
Try Download and Installation Help

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Sorry last question got knocked back my ipad and iPhone on two different levels and I am not able to play through Facebook so not able to progress or unlock next level through Apple store. Don't know how to resolve problem

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.

What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.

HT4623 updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I am a Mac user and I don't have cd drive in my compu

I bought adobe CS6 design standard (CD) last year in the month of july and didn't active my product yet. I bought in from the University of Washington, Seattle store on a student and teacher licensing. I have the product code with me. I am a Mac user and I don't have cd drive in my computer and I am indeed to get this product activated now. How can I install this without cd drive? Anyone please help me with this issue?

You may download the product from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

I having problem with the answer question for the App Store. And I forgot the answer

I having problem with the answer question for the App Store. And I forgot the answer

Pleae call 1800MYAPPLE ask to speak to account security

Z77a-GD65 - Thanks for the help before _ one last question

-
you guys were very helpful re - Pcie lanes , and we are probably going to move in future to one of the suggested boards:
my problem is i have 4 cards in the GD65 all in 1X slots _ the encryption software runs them at a full type pace.
1X is fine as I'm not gaming , just solving "xxxCoin" blocks .
at the start everything ran for about 24 hours, but now within 8 hours i will notice that the Blue LED light system is full lit up and everything is frozen - i have been working on the program dialing down the intensity slowly to find the problem, but any suggestions?
I have to power off manually if this happens , but all the fans on the cards stay at the same RPM (i.e as high) but the blue LED is full lit and everything is frozen.
as opposed to now there are 2 leds lit in normal operation.
any pointers?

OK guys sorry about that.
I should know better sorry i was rushing , OK i believe have figured out the general problem.
the Blue Led represent HD activity normally when they get stuck solid the OS had frozen , I have narrowed that down to bad power..
oh sorry I'll add MAX REVO 1500W PSU to my signature -
I have a meter on the point, at full blast the 4 cards and the mobo etc are pulling around 1150 to 1200w oh the 1500w Max REVO.
We have notoriously bad quality power where i live , (the whole suburb) (they have and actual sign up in the main street announcing they are working on it )
SO here is my Question:
Does the the Z77A-GD65 have what might be called "Watch dog" where the Bios polls the OS for a response and if it does not get one then restarts the system, my Brother is a Sys engineer he said a lot of Servers have it ?
this would be very beneficial to me as its always when i go out that of course the power screws up and i come back to find a frozen or switched off computer , but if i had this feature i could just run a . BAT at the start-up and be back online working again after reboot.
thank you for any help !

What is the last question at the end of auto-updates? "Allow" what? (I clicked on "Done" too fast.)

Hi, I installed an auto-update today, lazily clicked on "Done" at the end without taking the time to read the last "pop-up" dialog box. I saw options about "allowing" something but I did not get a chance to read the question before it disappeared. What was that last question???

replying to JS1111
Now I only get one HKEYLOCALMACHINE\Software\
QuicktimePlayerLib.QuicktimePlayerApp\CLSID.
some folks have been having some success with pgfpdwife's technique in the following post:
pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
There are also some instructions on how to back up registry keys in the following document:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows

One last question about capturing from tape

I have a box full of family VHS tapes that I will be capturing into the computer to digitally archive. However, I want to make sure I am doing it the best possible way. These are the two things most important to me:
1. Quality
2. Longevity
1. Quality
I have a VHS/MiniDV JVC SR-VS30 deck connected via firewire into my 2014 iMac. I know that firewire is typically the best option when capturing DV footage into the computer. However, is this still true for VHS and other forms of old tape. I can hook anything up to this deck via composite/s-video in and go out through the firewire connection. However, I wasn't sure if firewire was the best coming from a VHS tape. I also have an old video capture card that has a straight s-video/composite input. Which would be more native to the VHS/analog tapes as far as keeping original quality and the best possible image?
When I use the JVC deck, some programs will capture the vhs tapes and others won't because they won't recognize unless I'm using the DV side. For example, FCPX recognizes the deck, but when I go to import unless it's a dv, it will say "no tape" and I cannot capture anything. iMovie will capture files as .DV. Quicktime will also recognize the deck and capture files as apple prores MOV files. When I compare the QT and iMovie, the QT files look better in my opinion, though I don't know if they truly are. The iMovie dv files have jagged edges like tv lines or something during quick movement and like others say about firewire it looks a little "milky" (though I know this isn't necessarily a bad thing). The QT clips don't necessarily look sharper, but they don't have the hideous jagged edges.
So my question before I start this large project is:
Which capture methods above would you use, or what else would you recommend for best quality?
2. Longevity
Which file format would you recommend saving these files (or just keeping them as they are at capture) for long term storage? When I come back to these files in 10 years and need to convert them to something new, I want them to have the greatest chance of being compatible with whatever lies ahead. There are so many different file formats.
Many thanks for any help along this long process

I want to make sure I am doing it the best possible way.
I have done lots of that.
For maximum quality here is my procedure: ADVC300 > iMovie 06 > iDVD 09/11.
To get your VHS video into iMovie, use the Grassvalley ADVC300 . With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The ADVC300 has been discontinued by the manufacturer. The included software (which is not really necessary but does enhance performance) is not compatible with OS 10.7 or newer. You can still find the ADVC300 for sale in a few outlets as well as eBay. It will sell between 50% and 100% ABOVE its retail price. Yes, it's that good.
If you can’t find the ADVC300, use the Grassvalley ADVC110.
I have a drawer full of analog-to-digital converters. After using the Grass Valley ADVC300 I find nothing else acceptable.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09, 11, and 13 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video. (Also the latest iMovie CANNOT set Chapeters !)
After lots of experimenting I get the best results using OS 10.6, iMovie 06, and iDVD 09/11. My movies look just like Hollywood!
My primary computer is a Mac Pro, so I just use one of the four hard drives and boot OS 10.6. You can also partition a single hard drive to achieve the same results.
This may seem like more trouble than you want to go through. However, I find the superior quality to be well worth it.

One last question about upgrading my old computer

I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ?
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ?
** Thank You in advance for any info you may be able to give **
This question was solved.
View Solution.

JohnBolo wrote:
I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ? The PCI Express slots are backward compatible. Therefore, the PCI Express 2.0 will work in PCI Express 1.0 slot. Here are the System Requirements for the game. The recommended video card is a HD 4870 or larger.
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ? Once the dedicated video card is installed the Integrated Video is disabled. Therefore, they are independent of one another. The major conecern when buying a dedicated video card is, the wattage required for it to operate properly. I believe that the power supply unit (PSU) in your computer may be 250W to 300W. You can check the lable on the PSU to find the wattage. It will be difficult to find a video card that will operate with that wattage.
** Thank You in advance for any info you may be able to give **
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

One last question - default...

Okay, now that i've got my new AEBS on the net and printing wirelessly, one last thing is bugging me. Whenever i put my iBook to sleep, upon wake up, it always selects my neighbor's wireless network, and not my new AEBS. The neighbors (our friends) haven't secured their network, so my mac can join without a problem. But it will select it even though the new AEBS's signal is much stronger! Is there a way that i can ensure it selects our base station first over any other networks?
Cheers,
brige
iBook G4 1.42ghz 14" Mac OS X (10.4.4) iPod Mini 6ghz, iPod Nano 4ghz

Try the following:
1. Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
3. Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

One last question on the FCP 4.5 and 10.4.9 mess....

Similar Messages

Maybe you are looking for