One Last thing about Hard reset..!!!

Hi Guys,
Read few post about Hard reset on N95. Still need to clarify one last thing. If I do a hard rest, does it clear all the unwanted small small files in the phone memory? In addition, if I install a trial version, will it allow me to use even if the software is expired before the hard reset?
Message Edited by wumesh on 06-Jan-2008 03:16 PM

Thanks again for your prompt response.
45. My device "died" during an update. What should I do?
Yes, try hard rest, if it doesn’t work take to the Care Point
I agree with you, no one has mentioned whether it is healthy to do the hard reset. Even for soft reset I don’t think so but I assume it doesn’t have much of an impact to the device.
My main requirement for hard resetting is that I have tried many third-party applications with my N95 and I know that even I have removed them all, there are some files are in my phone memory. When I search for clear the unwanted, I didn’t find any better way than hard resting.

Similar Messages

One last question about capturing from tape

I have a box full of family VHS tapes that I will be capturing into the computer to digitally archive. However, I want to make sure I am doing it the best possible way. These are the two things most important to me:
1. Quality
2. Longevity
1. Quality
I have a VHS/MiniDV JVC SR-VS30 deck connected via firewire into my 2014 iMac. I know that firewire is typically the best option when capturing DV footage into the computer. However, is this still true for VHS and other forms of old tape. I can hook anything up to this deck via composite/s-video in and go out through the firewire connection. However, I wasn't sure if firewire was the best coming from a VHS tape. I also have an old video capture card that has a straight s-video/composite input. Which would be more native to the VHS/analog tapes as far as keeping original quality and the best possible image?
When I use the JVC deck, some programs will capture the vhs tapes and others won't because they won't recognize unless I'm using the DV side. For example, FCPX recognizes the deck, but when I go to import unless it's a dv, it will say "no tape" and I cannot capture anything. iMovie will capture files as .DV. Quicktime will also recognize the deck and capture files as apple prores MOV files. When I compare the QT and iMovie, the QT files look better in my opinion, though I don't know if they truly are. The iMovie dv files have jagged edges like tv lines or something during quick movement and like others say about firewire it looks a little "milky" (though I know this isn't necessarily a bad thing). The QT clips don't necessarily look sharper, but they don't have the hideous jagged edges.
So my question before I start this large project is:
Which capture methods above would you use, or what else would you recommend for best quality?
2. Longevity
Which file format would you recommend saving these files (or just keeping them as they are at capture) for long term storage? When I come back to these files in 10 years and need to convert them to something new, I want them to have the greatest chance of being compatible with whatever lies ahead. There are so many different file formats.
Many thanks for any help along this long process

I want to make sure I am doing it the best possible way.
I have done lots of that.
For maximum quality here is my procedure: ADVC300 > iMovie 06 > iDVD 09/11.
To get your VHS video into iMovie, use the Grassvalley ADVC300 . With the ADVC300 Audio and Video go in, FireWire comes out. It also comes with a nice Macintosh application that works flawlessly with iMovie 06 and iDVD 09/11 (I have used it a few times with iMovie 11).
The ADVC300 has been discontinued by the manufacturer. The included software (which is not really necessary but does enhance performance) is not compatible with OS 10.7 or newer. You can still find the ADVC300 for sale in a few outlets as well as eBay. It will sell between 50% and 100% ABOVE its retail price. Yes, it's that good.
If you can’t find the ADVC300, use the Grassvalley ADVC110.
I have a drawer full of analog-to-digital converters. After using the Grass Valley ADVC300 I find nothing else acceptable.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source (VCR, Tivo, Satellite Receiver) and convert it to FireWire (iMovie will treat it like a camera).
I would use iMovie 06 with iDVD 09/11, why?
iMovie 09, 11, and 13 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video. (Also the latest iMovie CANNOT set Chapeters !)
After lots of experimenting I get the best results using OS 10.6, iMovie 06, and iDVD 09/11. My movies look just like Hollywood!
My primary computer is a Mac Pro, so I just use one of the four hard drives and boot OS 10.6. You can also partition a single hard drive to achieve the same results.
This may seem like more trouble than you want to go through. However, I find the superior quality to be well worth it.

One last question about Apple IDs

I thought id asked the lot but there is one last question. How does one delete an Apple ID?
Many thanks again
Anthony

Hello Again Anthony!
"How does one delete an Apple ID?"
You can't.
After you quit using an account, it's posts, will be archived. What that means is, that if there are no additional responses in the Threads they reside in, the Topics will get continually pushed down on the Topics list. After a certain amount of time, maybe 2 to 6 months, the Threads will be locked, so no responses can be entered. But the Threads will not disappear.
Threads in heavily trafficked Forums, may be archived more rapidly than those in areas, with less activity.
The Topics that you started using the account, will show your the Alias, in the Author field of a main forum page, but eventually, readers will have to keep going to the succeeding pages to view them.
If someone were to do a Discussions Search, using these parameters:
Restrict by Category or Forum: All Categories
Restrict by Date Range: All
Restrict by Username: Your Old Alias
all of your posts, created since about 11/13/05, would be found.
ali b

One last question about building and formatting

When I am writing my DLT do I need to remove the .layout file and the Data.lay file? It will already be built but I will be using DVDSP3 to write the DLT. Are they removed automatically? The manual seems ambiguous about this.
Also I need to output in the DDP2.0 format (Its a DVD-9). I can't select this without choosing build and format. I have been testing by building to my desktop and testing on the Apple DVD player. If I choose build and format will it rebuild the project? And if it rebuilds is it possible for me to get something besides what I have been checking? I just want to make sure I write the same thing to the DLT that I have been checking.

you can also get ddp by just doing format as opposed to build and format. You can not open a ddp image in dvd player to test it, so there really is no use of building it to your hard drive. If you have already built the project and you have a video ts folder, then you can go under format and choose the dlt drive as your location and make sure you are referencing the folder with the videots in it.
there wont be anychanges from the video ts after it has been built, it is merely converting it into a ddp image.

One last doubt about the Verification Required message when trying to download anything.

Hello guys, so this is the thing.
Like a lot of people here I'm getting the annoying message "Verification Required: Before you can make purchases, you must tap Continue to sign in, then verify your payment info". OK right now my son is using my iPad and I setted my credit card payment info to None, so he can't purchase anything. He's just trying to install free apps like messengers, alarms, free games and other free stuff, but so far he only installed Yahoo Messenger, which is a free app like everybody knows. However we haven't be able to download anything else because that message which prevents to download anything. Also I'm in a new address and can't update my personal data because I have selected the None option in credit cards.
So this is my doubt: If I checked None, it's suppossed I can't pay for anything, which is good to me right now because my son is ussing my iPad so, why I can't even download the free ones? I mean that's not logical to me.
Why I can't navigate through the App Store getting free apps without this annoying message which prevents me to install even free apps?
I just don't understand it.
I hope anyone can help me.
Best regards.

Try 3 things -
1. Double tap on the Home button, scroll through the appas until you get to the Apps Store one, press on it until the minus sign appears on it and then press of the minus sign. Go back to your Home page, selec the Apps store nd try again.
2. Do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!
3. Delete your card details in your Account details and try again.

One last question about upgrading my old computer

I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ?
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ?
** Thank You in advance for any info you may be able to give **
This question was solved.
View Solution.

JohnBolo wrote:
I purchased an older HP computer P6243W
(it's all I can afford on my VA disability)
I'm looking to upgrade the video card buy purchasing a low priced PCIe Express X16 video card
I need a little more video power to play diablo 3
(please forgive my ignorance)
Question 1: Will a PCIe Express 2.0 X16 work in the slot ? The PCI Express slots are backward compatible. Therefore, the PCI Express 2.0 will work in PCI Express 1.0 slot. Here are the System Requirements for the game. The recommended video card is a HD 4870 or larger.
Question 2: The intergraded video on the mother board uses ddr2 memory can the video card I purchase use gddr3 memory ? Once the dedicated video card is installed the Integrated Video is disabled. Therefore, they are independent of one another. The major conecern when buying a dedicated video card is, the wattage required for it to operate properly. I believe that the power supply unit (PSU) in your computer may be 250W to 300W. You can check the lable on the PSU to find the wattage. It will be difficult to find a video card that will operate with that wattage.
** Thank You in advance for any info you may be able to give **
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

One last question about apple tv!! viewing movies in movies folder

thanks to those who have responded to my previous questions.
thinking of buying an apple TV this weekend, but here's my last question (which I just thought of!)
i've got a collection of movies in various formats, usually .mov or .dv of home videos i've made in FCE and iMovie over the years, some of them several GB in size (oops!)
what's the best way of viewing these on the apple tv. for instance
1. does apple TV let you look into your 'movies' folder in the home folder to play any movies it finds there
2. will it play .dv or .mov files, or does it need to be a specific format
3. i've noticed an 'export to apple tv' in quicktime pro, do i need to do this for all my movies before apple tv will play them. and after i do an 'export to apple tv' where do the files need to be? imported into itunes, or just sat in my 'movies' folder?
cheers, looking forward to visiting the apple store tomorrow!

1. does apple TV let you look into your 'movies' folder in the home folder to play any movies it finds there.
No, the tv uses itunes for its source of movies.
2. will it play .dv or .mov files, or does it need to be a specific format
DV, no. MOV, maybe. MOV is a container type not a compression type, if the MOV container has the correct compression formats in it then it will play. Movies for the tv need to be either mpeg4/2 or mpeg4/10 (H264/AVC)
3. i've noticed an 'export to apple tv' in quicktime pro, do i need to do this for all my movies before apple tv will play them. and after i do an 'export to apple tv' where do the files need to be? imported into itunes, or just sat in my 'movies' folder?
Yes 'export to tv' will do the job for you. You need to be aware though that DV with the wrong field dominance will cause it a problem, and some cameras do use the wrong field dominance. It won't work with muxed files (mpeg2 for example) and on SD movies it can be a little wasteful on space. I've always used mpegstreamclip to convert from DV.
Of course from now on you'll be using FCE with this in mind and exporting accordingly.

One small thing about the on/off/sleep button

I find it too sensitive. Whenever I grab the phone from a table and I inadvertently get my finger over the button, it activates. It's much easier to push than my previous phones.
I have a Bumper on mine. I don't know if I'm gaining extra traction by having a second button to push the first.
I honestly think it's my only complaint. More an annoyance and possibly only to me.

I have noticed this too, I too have a bumper on. I can feel your pain, lol.

Here's one good thing about these "Powered by Jive" forums

Everything else seems blindingly fast when you leave.

<bill murray>so it's got THAT going for it...</bill murray>

One last crazy thought on wierd email

I've had the same problems as all 6000 posters have had regarding the email issue.
I've restored from backup, restored as new iPhone, reset network settings, removed and reinserted sim card. All no luck. Always the restart to get mail to work. Manual only 3 POP accounts.
Seems highly unlikely that a gazillion sim cards could be bad, BUT, they were all made, and all put into the iphone in China, and perhaps there might have been a bad batch. I am going to try one last thing. Go to ATT, get a new sim card (it's free), let them register the phone and see what happens. I'm not optimistic about this, but the Genius Bar guy today said that some people have had luck with this.
If what I expect happens, the same old problem, then I guess it's wait for 2.01.
I'll keep you posted.
Thanks,
CD3
Message was edited by: CD3

Thanks for the reply JER101, that is certainly interesting. I don't know what the default setting is for the aperture, but I think it is normally set equal to the amount of ram on the card if you have enough system ram to support it. On the other hand, if you only had 128MB system ram and the AGP aperture was set to 128MB, that may be an issue. As I understand it, the AGP aperture allocates system ram as virtual memory when the AGP ram has been exhausted. If this is not correct, please correct me.
Thanks,

Far Cry 4 - computer froze. Only hard reset helps.

Hello dear forum.
First my pc:
4790 stock
8gb ram
Sabertooth Z79 Mark2
Msi Gaming 980 ( Oc factory )
Corsair 750 RM
HDD 500GB SATAIII
So 5 days ago when playing Far Cry 4 my computer suddenly freezes with "BZZZZZ" sound.
( ctrl alt del and so on didn't work I had to pull the power and restart. )
So only hard reset helps.
Question of course . Why i was had one single hard freez 5 days ago?
There is no any minidumps file to analyze. Minidump folder is empty.
No minidump file.
Nothing appears in the Event Viewer other than the typical error messages stating that the previous shutdown was unexpected.
On windows event log i have this:
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Event ID: 41
Level: Critical
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
It can be game or something with hardware?
After that i run even Prime95 Blend for 10 hours, without errors.
I test Watchdogs for 2 hours , no crash.
I test Metro Last Light for 2 hours, no crash.
I test Unigine Valley for 1 hour, no crash.
I test 3dmark 11 Extreme loop for 1 hour , no crash.
Also i dont OC my pc, all is stock.
I am using 334.75 WHQL drivers.
What you think that freeze was game\software or hardware related?
Like i say all is fine now, but i am worried about that one single freez ( only hard reset helps ) from 5 days ago.
Thank you for any suggestion.
Should i be worried?
Yes it happens only once, so thats why i create a topic problem. Because i want to know , what caused that one single freez. I never had freez like this even before.
The most strange that my freeze happened once, 5 days ago. I am now 100 hours in game ( Far Cry 4 of course ) and nothing happened again.
It can be software or hardware problem?
Freez was related to software or hardware then ? What you think?

Quote
It can be software or hardware problem?
Freez was related to software or hardware then ? What you think?
based on everything that you said, nothing is conclusive
do more test and see if the issue will come back again

One last question - default...

Okay, now that i've got my new AEBS on the net and printing wirelessly, one last thing is bugging me. Whenever i put my iBook to sleep, upon wake up, it always selects my neighbor's wireless network, and not my new AEBS. The neighbors (our friends) haven't secured their network, so my mac can join without a problem. But it will select it even though the new AEBS's signal is much stronger! Is there a way that i can ensure it selects our base station first over any other networks?
Cheers,
brige
iBook G4 1.42ghz 14" Mac OS X (10.4.4) iPod Mini 6ghz, iPod Nano 4ghz

Try the following:
1. Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
3. Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

HT1430 I do a hard reset of my iPhone every so often because I feel it improves performance, but Apple states 'Reset ONLY if the device is not responding'. Forget about my OCD on this, but is their any reason my Apple stresses the ONLY DO THIS if not resp

I do a hard reset of my iPhone every so often because I feel it improves performance, but Apple states 'Reset ONLY if the device is not responding'. Forget about my OCD on this, but is their any reason my Apple stresses the ONLY DO THIS if not responding?

deggie wrote:
Because it is more far-reaching than just turning the phone off and back on, it completely takes out anything in volatile memory, etc. I do reset mine if I notice problems such as no email coming in, text message issues, etc. but the same thing could probably be accomplished by just turning the phone off and on in your case.
Thanks deggie, I think I get it now. Volatile memory (I had to look it up!) is memory that is lost on loss of power, so it's as you say... I'm not achieving anything on a normally functioning iPhone as on-off achieves the same result!... Thanks

All-In-One C4780 screen is stuck on a loop. How can I hard reset the printer?

I have a C4780 and am running Windows 7. I have had the printer for 2 years and never had a problem until recently. I have been unable to print for months because the touch screen on the printer is stuck in a loop. I first noticed the problem because I could hear random beeping and printer movement from the other room. It was doing it all on it's own. There were no changes to the computers, wireless or anything. I had just used it 2 weeks prior to print a passport photo and it worked fine.
It thinks I am trying to print from a memory card and asks me to insert the card. Then it thinks I am trying to print a passport photo. Then it thinks I am scanning and asks me to place the photo face down. (etc, etc) If I try to hit cancel on any of the screens, it moves on to a different task it thinks I want done. If I try to follow through with the task it wants to do, it cancels it on it's own and moves on to another task. It will also move through the screens and tasks without me around. It moves so quickly through the screens that when I do try to get to a certain screen, I sometimes can't, because the printer has taken off in a different direction of screens all on its own.
All software is up to date.
I have tried turning it off, unplugging it, waiting, plugging it back in, turning it on.
I have tried unplugging it while it is on, waiting, plugging it in and turning it on.
I tried a semi-full reset by pressing bottom left 4 times. It was actually really difficult because the printer kept changing screens randomly while I was doing it. I finally got it to do the reset. It got to the "now printing alignment page..." screen and then just moved on to the main screen. Never printed the page. Shortly after that it started doing the screen loop with wireless settings. And now it is back to doing a loop through all the screens again.
It seems to be pushing buttons on its own.
Does anyone have any idea of how I can fix this? Is there a way to do a hard-reset on this printer? Restore it to factory settings? Or doing you think there is something physically wrong with the touch screen where it is actually pressing buttons on it's own?

I'm having the same problem, including paper running through the printer randomly. I believe I completed a semi-full reset that (so far) has stopped the paper going through the printer. And, the random changes on the touch screen seem to have stopped too. But, the touch screen still lights up and goes dark randomly, whcih leads me to believe that all is still not well.
I too would like to try and hard reset if one is possible on this machine.

One Last thing about Hard reset..!!!

Similar Messages

Maybe you are looking for