One Logic Track won't play

One of my Logic 9 tracks plays back (the meters move, I can hear it in the Sample Editor), but for some reason I can't get it to make noise thru the main outs. It looks exactly like it's playing, but no sound is coming out.

Post a SS of your Track arrange and also the corresponding Mixer view please. It's less of a guess work that way.
Cheers!

Similar Messages

  • I received an ipod touch 5th gen for Christmas.  The first songs i've downloaded and synced with my touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them

    The first songs i've downloaded and synced with my new touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them.  I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod.  It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?  
    I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.  

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I clicked "locate" when prompted, now the track won't play at all even from the hard drive though it's listed in iTunes. Can anyone help?

    I was prompted to "locate" a track, clicked yes, and now the track won't play no matter where I play it from. I've put it on the desktop, added it to library, tried everything - is there an equivalent "reconnect media" function like in Final Cut Pro? I'd be grateful for any help thanks

    Will it play in Quicktime player?  If not it may be corrupt and will have to be reloaded from the original source.

  • TS2289 Audio Track Won't Play

    I imported an audio clip yesterday and it worked fine. Today when I opened my project, there was a yellow warning triangle in the top left above the first frame of my movie and the audio track won't play. What should I do?
    And where the heck is the "clock buttom"? I wasn't able to follow Apple Support's suggestions because I can't find it.
    Mike

    I've adjusted my project according to Brian'statement, so I made all audio tracks and video track the same length, but it still doesn't work when I create the flash file. It plays only 1 audio track, whatever language you choose. It plays the audio track that is"active" in the project. This happens only with the flash. If I burn a DVD, then everything works fine... Am I doing something wrong ?

  • Slideshow Music tracks won't play

    I've tried various iTunes tracks and the perinstalled Aperture themes like Ken Burns, holioday mobile and cuts from the Sample music folder. The tracks won't play in the slide show proper or in the music pane. And it dsoesn't matter if the tracks are added as the main or secondary tracks.
    Ive rebuilt and repaired the library, deleted the Aperture plist file from ~Library>Appleication Support>Aperture and removed the presets folder. I've also done a Disk Utility permissions rebuild, Aperture permissions rebuild, Aperture Database rebuild, etc.
    What I discovered last night is that Aperture will crash whenever I select Aperture>Presets>Slideshow. Selecting the other presets is fine and the appropriate dialogs will present themselves. When the Slideshow preset is selected, a minature ghost image of the dialog appears for about 2 seconds and then the app crashes.
    Here's the first part of the crash log. Any help will be gratly appreciated because I'm trying to put together a slide show for my niece's wedding!!
    Regards,
    CS
    Process:         Aperture [403]
    Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:      com.apple.Aperture
    Version:         3.1.2 (3.1.2)
    Build Info:      Aperture-1530000~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [186]
    Date/Time:       2011-06-06 10:10:25.391 -0500
    OS Version:      Mac OS X 10.7 (11A459e)
    Report Version:  9
    Interval Since Last Report:          279393 sec
    Crashes Since Last Report:           20
    Per-App Interval Since Last Report:  15182 sec
    Per-App Crashes Since Last Report:   17
    Anonymous UUID:                      C981776F-DB4A-4766-957A-4AE5E95C87EF
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: 0x000000000000000d, 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 0000000100000000-0000000100adb000 [ 10.9M] r-x/rwx SM=COW  /Applications/Aperture.app/Contents/MacOS/Aperture
    Application Specific Information:
    objc_msgSend() selector name: ID
    objc[403]: garbage collection is OFF
    Performing @selector(a_orderFrontPresetEditor:) from sender NSMenuItem 0x10216ac00

    Sorry, I should have given more details but I've posted variants of this question in many places already, moving to a different forum when advised to by others because it really does seem to be a multi-application problem.
    I was sent the slideshow as part of an .rcproject file. They had tried to create a DVD but had been unsuccessful, so just sent me the project from which I could view the slideshow complete with soundtrack.
    To find out how it should have been done I asked here about the easiest method in iLife to create a DVD from a slideshow and was told iDVD, but when I added the movie files back in as an intro the slideshow soundtrack disappeared and I couldn't find out where to or how to get it back.

  • Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop

    Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop. For example both versions of Til' I Collapse by Eminem won't play on my iPod but on laptop, same with Born this Way by Lady Gaga

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • IPhone4, iPod app weirdness. Some tracks won't play. [updated]

    Hi all.
    So yesterday on my way to work my iPhone4 stopped playback (iPod app), i pressed the play button, but it just didn't do anything and the track remained unplayed. I click to the next track and that one worked just fine.
    This happen to serval tracks on my way to work and later on my way home, and again this morning. The patten, is that all the music that won't play are coming from a few albums, Hendrix, Red Hot Chilli Peppers blah blah blah.
    I checked those track in iTunes and they played just fine. Also these tracks were downloaded from iTunes. There were not CD rips for downloads from another vender.
    The only thing i did before this happened, was a sync/backup to iCloud that night before (Sunday).
    As yet i have no idea what went wrong. And if you have had this happen and figured it out please let me know. Or if this is happening to you now, what are you doing to figure it out?
    I, right now, am re-uploading all the music. I first removed it, all. Every album, every track. And i'm hoping that by re-installing them all over again will fix this, weird, issue.
    [Update]
    Okay, so the re-install of all the music is done, and i played Jimmy Hendrix through my iPhone4. So i guess that worked. If i have anymore issue like this i'll update this post. But if you are having this same issue, than i suggest that you re-move all the music. Or rather that ones that are stalling. And re-load tham again. As i didn't want to miss any i did the lot. Hope this helps.

    No replies. I've taken to noting the problem tracks and just re-ripping them from their original sources. This seems to fix the symptom at least, if not the cause.

  • Track won't play!

    I have a song that won't play, even though it's been authorized, and I have not exceeded computers to play it on. It just skips over the track. I paid for it through iTunes.

    Click here and request assistance.
    (80803)

  • Section of my track won't play...

    I use GB for a podcast.
    I recorded some voice, when in and did some snipping and joining of a few track segements.  Then recorded a new section on the same track, but the new section won't play.  I can see there are sounds recorded, but when I play, I don't hear anything.  If I go back to the 1st recorded section - remember this is all the same track - it WILL play.
    I'm confused.
    iMac 2.7 GHz i5
    8 GB RAM
    OS 10.9.3
    GB 10.0.2

    Hello alysoftball1
    There are a few things to try. The first is if it is purchased, just delete the songs and download them again from the purchases section in iTunes. The second is to try and convert the songs to a different format. The article below will assist with that further.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    iTunes: How to convert a song to a different file format
    http://support.apple.com/kb/HT1550
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Instrument track won't play (appears grey)

    All of a sudden my grand piano track is grey and won't play back. All of my other tracks work and it is NOT on mute.
    I don't think I did anything differently. The only thing I can think of is that I was tinkering with audio filters for this instrument track. Could that have caused it?
    How do I fix it? I don't want to have to re-record the whole thing. I'm too far ahead to do that....
    Thanks! I'm waaaay to frustrated to continue. 3 hours wasted it feels like.

    I will try the M button but here's why I don't think it will work:
    If I copy the track's contents into a new empty track, the new track doesn't play.

  • Long track won't play on shuffle

    I've uploaded some songs and podcasts to my iPod Shuffle, but some podcasts won't play at all on the Shuffle. The files all play in Itunes itself.
    The podcast is a mix with a duration of about an hour. It's encoded AAC 128 Kbps. Is there a maximum duration for audio files on the Shuffle or am I doing something wrong here?
    Thanks for any help!

    Thank you! Did the trick

  • Soloed Audio Tracks Won't Play Logic 9.1.8 - Background Still Does

    I have a 59 track session in Logic 9.1.8. I've encountered a very odd problem. Multiple audio tracks, even when soloed, will not play; however background audio/other tracks still do. For instance, I've imported a rough vocal track to the mix and when I solo the track, I do not the vocals however I hear kick drum and piano tracks which have been muted. I have double checked every audio track's output, automation, etc…and read several other posts to try and find anyone with a similar issue, to no avail.
    Some specs - the majority of the tracks are imported Audio, I have attempted to solve the issue from my MacBook Pro (2013) AND from my studio system. All of the audio and session information are stored on our dropbox server, however other projects still work fine.
    Here's where it gets super weird - I even tried started the session over again and just importing in the audio tracks from scratch and there is STILL a problem - I imported 5 of the drum tracks - kick, hat, snare, taiko, and noise percussion. When I solo the taiko track, I hear the audio from the kick track and NO AUDIO from the taiko track, and this is a BRAND NEW SESSION.
    Someone PLEASE HELP.

    In Logic's preferences/Audio... Is Universal Track Mode enabled?  It should be.

  • Logic Pro X: One MIDI note won't play

    I am having a strange problem with Logic Pro X. I use a Yamaha CP33 as my main MIDI keyboard, connected by USB. In the past couple weeks, a strange problem has emerged - one of the notes from the keyboard, the B-2, to be specific, just doesn't trigger. At first I thought the key was broken, but it's okay, because:
    - all keys work fine when I use the keyboard's analog audio output
    - all keys work fine in MainStage
    - the non-functional key moves up and down if I choose to transpose the notes on the keyboard.
    So I have concluded that it's a software issue specific to Logic. I have already tried reinstalling the Yamaha USB MIDI driver, it didn't help. Could it be some obscure setting in Logic that is messing things up? What do you suggest can I do to fix this?

    Hi
    You may have set up LPX to use that MIDI note as an automation control, or as a keycommand
    a) Go to Preferences;Controller Assignments & check there
    b) Go to Preferences Key Commands and check there
    Might be quicker to reset aboth?
    CCT

  • Some tracks won't play in iTunes anymore

    I have a number of .mp3 files that iTunes used to play, but now no longer will. Nothing happens when I double click on them or press play. Most of my other tracks play fine.
    When I "get info" about the problem tracks within iTunes, and I click on Summary, I notice that the Format, Channels, ID3 Tag, and Encoded With fields are no longer present. The file type is still MPEG, and when I locate the files through the finder and get info, they are .mp3 files with an .mp3 extension.
    I've read some discussion of this problem on these boards, and some have suggested that the problem occurs when one tries to play the files through QuickTime. This isn't my case. (Quicktime says "the movie could not be opened.") But I have noticed that the problem tracks do have in common album titles in which I have included a colon. I allow iTunes to organize my files, and usually--and even in the case of these problem files--an underscore replaces the colon when iTunes creates the album folder in my Music folder. I bring this up only to suggest that one common denominator for the problem files is the presence of a colon in the album name for the iTunes tag, although the presence of a colon is not a guarantee that the file will not play.
    I have tried copying a trouble file to the desktop, deleting the file from the library and from the Music folder (although I haven't emptied the trash) and then trying to restore the copy to my iTunes library. iTunes won't accept the file.
    Any ideas? What a crazy problem!
    MacBook   Mac OS X (10.4.6)  

    Unfortunately, you are not alone with this. However, I have yet to come across a solution to the problem after many hours trawling these discussion boards and the net.
    I have exactly the same symptoms. But my common denominator is ‘missing Album Artwork’. Although the album has Artwork, all the tracks that have ceased playing and are being ignored by iTunes, have lost their Artwork.
    This would suggest a problem with the ID3 tags i.e that they have become corrupted. Of course, the recent update from iTunes 6 to 7 which introduced the ‘Coverflow’ technology has coincided with the start of my problem. A quick glance at the ‘last played’ date of the problem tracks confirm that the corruption of the ID3 tag is DEFINETLY post iTunes7.
    I have tried editing the metadata with an ID3 tag editor, and can change everything except the Artwork field. If anyone has found a way to restore a track after the same problem, please post…many thanks.

  • Please help!  Logic Studio won't play nice with my Edirol UR-80 controller

    Hi everyone,
    I finally upgraded to Logic Studio (from Logic Studio 7 - quite the upgrade!) when I got my new iMac recently, and I'm itching to use it but can't get it to work with my control surface no matter what I do. I have an older controller - it's an Edirol UR-80, made by Roland, and it worked perfectly with my old setup. Logic will recognize it and I can program some functions to work correctly, but my beloved track wheel and any of the main buttons (play, record, etc.) just won't work. I've done a bunch of research, called all relevant manufacturers, and even took it to the Apple Store, but nobody can help. The folks at the Applie Store said that since it's not a supported control surface, the transport features might just not work. But I thought I would put it to you geniuses out there to see if someone has had a similar problem or any thoughts on what might help. Any help would be most appreciated!
    -Dan

    I do not know this piece of equipment, but the rule of thumb is simple: any knob/wheel/slider/switch that sends a MIDI message when touched, can be applied in Logic. So the thing for you to do is to examine what sort of message they send, and then use the 'Midi learn' function to set it up manually.
    The best way to monitor midi messages is in the environment, with a monitor object.
    !http://farm3.static.flickr.com/2492/3844372277_0ec7b022f3.jpg!
    regards, Erik.

Maybe you are looking for