One Macbook running Leopard and one running Tiger

I have one Macbook running Tiger and one Macbook running Leopard, can I upgrade both machines to Snow Leopard with the Family pack for $49.95?

As some people on other threads have been stating, there is nothing legally that says you can not use the SL Upgrade on a machine running Tiger. The word used is "suggest" that you use the box set. Again, as others have mentioned, if you did not go to the Apple website but just went to the store (ie Best Buy) the $29 SL Upgrade only requires an intel machine.

Similar Messages

  • Running Leopard on one partition and Tiger on another partition?

    I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations.
    One machine is a 20" 2.0 Ghz Intel - IMAC Aluminum (August 2007), and the other is a G4 Powerbook 17" 1.67ghz 250GB HD. I will probably install on the IMAC first.
    My question concerns the G4 Powerbook 17." I have just purchased a 250gb internal hard drive; however, it has not arrived yet. From time to time, I want to be able to run a few programs in classic....., and to have that available to me in the rare event that I want to look at files formatted for classic programs. Call me old fashion or unable to let go of the past... .in any event, I have some files that may be difficult to convert or some software that I do not want to purchase in OS X because I use those programs so rarely.
    Initially, I considered just having an external fire wire drive with Tiger installed on it in which I could boot classic up on the rare occasion.
    My new idea has been to partition the internal drive to have 10 gb or so available for Tiger. Has anyone successfully run Leopard on one partition and Tiger on the other partition or do they potentially cause problems for one another? Any suggestions, recommendations or concerns are welcomed.

    Works like a champ. I run Panther, Tiger, Leopard, and OS 9 on the G4 w/o problems.
    Get a bootable, external HD, partition it into enough volumes to accommodate each machine, and make bootable backups/clones of each machine before upgrading/updating and ensure that each boots that machine and works like the original. That allows you to revert to the previous good state without having to reinstall anything. See these for details:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    Once that's finished, review these for upgrading options:
    http://discussions.apple.com/thread.jspa?messageID=5757385
    http://discussions.apple.com/thread.jspa?messageID=5666369
    http://discussions.apple.com/thread.jspa?messageID=5646414

  • Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

    Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

    Yes you can but you need to partition the drive into at least 2 separate drives.
    To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
    Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
    Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
    I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
    Good Luck.

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • My mail program frequently asks for passwords that I have provided and saved many times.  I am running Snow Leopard and have run the Keychain repair a few times to no avail.  Is there a fix for this or do I have to find another email program?

    I am running Snow Leopard and have run the Keychain repair a few times to no avail.
    Is there a fix for this or do I have to find another email program?

    This is frequent, not just occasionally.  All cancel does is stop the email from coming through until I provide the password.
    I thought about it being on the provider's end but it never happened when I was using Entourage, I just don't particularly like that program.
    I don't understand why this problem has gone on so long without Apple doing something to fix it but I will continue to look for alternatives to the Apple Mail program.  If I find a good one I will let all know through avenue.
    Thanks again to all who tried to help.

  • Running Leopard and Snow Leopard

    Hey guys and gals... I recently bought a new macbook pro with snow leopard installed. This is all great, but the program that I use the most (pro tools) only works on leopard (unless of course I want to pay 150 dollars to upgrade my pro tools, which I do not). Is there any way to run leopard and snow leopard just as some people run windows and osx? I would also like to not have to restart my computer every single time I wanted to switch back and forth. ANY help is greatly appreciated!
    Justin C

    Is there any way to run leopard and snow leopard just as some people run windows and osx?
    Basically, not if the computer was released after Mac OS X 10.6.
    I would also like to not have to restart my computer every single time I wanted to switch back and forth.
    This function requires Mac OS X Server.
    (50521)

  • I need to update my operating system from 10.5.8 to 10.6, I believe its the one before snow leopard and is just called leopard.

    i need to update my operating system from 10.5.8 to 10.6 on my mac mini, I believe its the one before snow leopard and is just called leopard.

    You seem to have your OS's confused.   Your profile says 10.6 but you are asking to update from 10.5.8.
    10.5.8 is Leopard.   It is also the highest level of Leopard you can achieve.
    10.6.(x) is Snow Leopard.   And 10.6.8 is the highest level you can achieve.
    If you have 10.6 then all you will need to do is download and apply the combo updater.
    If you have 10.5.8, then you will need to review the machine ... Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
    Subject the machine will take it, you will then need to buy Snow Leopard from your National on-line Apple store.
    Before you start upgrading, back up your files.   If you are unsure how best to do this, the following link is hugely informative.   Most commonly used backup methods: Apple Support Communities
    Once you have upgraded to Snow Leopard, your upgrade will take you to 10.6.3 and you then will need to apply the Combo updater.  Mac OS X 10.6.8 Update Combo v1.1
    and follow with software updates to pick up the most recent security and iTunes updates.
    This will give you the best and highest level includine the App Store.
    Good luck.

  • One 32 bit node and one 64 bit node

    I am planning to do a RAC install for learning purposes.
    I plan to use the document
    http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_12.shtml
    I plan to use
    node 1 is a 64 bit desktop
    node 2 will be a 32 bit desktop
    Is this a problem considering I am using one 32 bit desktop and one 64 bit desktop ?

    I haven't done what you are trying, that said; you should be fine as long as the you run 32bit OS on both machines. Your 32bit box will not let you run a 64bit OS, but your 64bit box will let you run 32bit OS. If you already have the hardware, just try it, all you wold be investing is time (IMHO, most ROI for learning). Put 32 bit RHEL/OEL/CentOS on both boxes and try.
    Good Luck!

  • Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

    ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
    stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • We are going to Great Britain this summer.  Do we need voltage converters as we'll plug adapters for our iPads (one is 2nd generation and one 4th)

    We are going o Great Britain this summer.  Do we need voltage converters as well as plug adapters for our iPads (one is 2nd generation and one 4th)

    No. Since Apple power converter work from 110 to 240 volts, no power converter is reguired.
    You will need a pin adaprt. I have found my local Ace hardware store to have the best deal on them.
    Allan

  • I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?

    Just create a new AppleID for your work.
    As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
    However, you can put items purchased on on account onto the other iPhone.

  • If I have two email accounts, one personal hotmail account and one MS Exchange work account, how can I setup individual notifications for each account. Right now, any email from any account has the same notification. I want work to be different than perso

    If I have two email accounts, one personal hotmail account and one MS Exchange work account on my iPhone 4s, How can I setup individual notifications for each account? Fore example, if I get a work email, I want to hear a DING, DING....If I get a personal email, I want to hear a BEEP, BEEP. Right now, any email from any account has the same notification. I want work incoming email notification to be different than personal incoming notification. The only semi-workaround I've seen is just disable any notification for the Hotmail account, so only work emails would notify. But then I don't know when I get a personal email. Even the lowely Blackberry Torch 9800 has this feature..not iPhone 4s??
    Thanks

    Sorry you get only one notification sound for all email accounts.  you can send a suggestion to apple here http://www.apple.com/feedback/

  • I have 2 apple id accounts, one on my iphone and one on my ipad. I would like them to be the same id. Is there a way to do this and still keep the music on my phone?

    I have 2 apple id accounts, one on my phone and one for my ipad. I would like to be able to use icloud and be able to sync info beteween them. Is there any way to change the apple id on my iphone without losing all the music and apps?

    No. You can sign in and out of the different accounts on the phone and the iPad but you can't use automatic downloads with two different ID's and if you switch to another ID on a device and then you download past purchases using that ID, you will lock yourself out of the other ID for 90 days.

  • I have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

    i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?

    The iphone will mirror the selected content of your computer.
    Make sure everything is on your computer.  Select what you want on your iphone, sync

Maybe you are looking for

  • BI Admin Cockpit Drill down routing to unknown host

    Hi Experts, We have implmented BI Admin Cockpit and testing it. When we try to drill down the query, it is opening in a seperate window and the host of the url is different than actual system. This shows  Bad Gateway error.  How to change this to act

  • Printing and signing in problems

    Hi, I've recently upgraded to Adobe Acrobat XI but since then I have been unable to print off any email pdf attachments and when I try to sign in to adobe export pdf when the pdf document is open, it keeps coming up with 'network error'. When I try a

  • Select Command taking a lot of time to execute

    Dear Experts, My below SELECT command taking a lot of time to execute.       SELECT wid                    matl_desc                    INTO TABLE open_wid FROM zwb_table                    WHERE ( weight2 = 0 OR weight2 IS NULL ). Table : zwb_table

  • Documentation for using Adobe Document Services

    Hi, Is there any documentation available on how to use Adobe Document Services? I have installed Adobe Document Services for Netweaver 2004. But I am not able to use the services as I do not know how to access them (is it like Adobe Document Services

  • The photoshop stops working when we choose to convert video layer, the problem.

    Ja o Problema identificado FOI? Tem Solução Uma?