One material in two company codes

How can we maintain one material in two company codes?

Hi Gopala,
We will be maintaining the Materila master to a particular Plant Level and Sales Organisation and Distribution channel.any way the Plant will be assinged to the Company code.
In this Thread. Scenario Like Inter Company Stock Transfer one Material should be maintained both the Plants for which will be having Two Different Company Codes.
Hope this Clear your Doubt and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Similar Messages

  • One vendor for two company codes

    Hi Frds,
    I have two company codes and i create a vendor which is applicable to both the company code.Is it required for me to create separate Payable reconciliation GL account  for each company codes or creation of one common recco  account is enuf.
    Please elaborate on this as am new to this..
    Thanks,
    Rashmi Ravi

    Dear all,
    SAP allows You to create a customer / vendor master data that contains information that is valid for all the Company code --> into General data.
    Then there is a part, Company Code data, where You can define specific details for each Company Code.
    The transaction is the same FD01 or FK01.
    I hope this helps You.
    Mauri

  • Same material in two company codes

    Hi all,
       I want to use the same material code (A1 - reynolds pen) for two company codes 1000 & 2000 what are all the implications i vl get in future,,,
    plz any guide me,,,
    regards,
    urendra

    Hi
    You will not get any implications for this.
    All your transactions are made effect on your valuation area.
    which may be company code or plant.
    In mm01 you are maintaing that material for plant level.
    So data related to this material is stored for perticular plant if you are valn area is plant.
    Also for stock transfer order you will have to maintain this material for both plants or company codes.
    regards
    rb

  • One Legal entity two company code - pros & cons

    Hi SAP GURUS,
    We are having one legal entity with multiple products. I want each plant  to be a profit center. But i am loosing plant wise profitability when we are transferring the same product from different plants, in a common depot. This is because we are not having batch & hence profitabilty for plant is lost when it is sent to depot for sale.
    In this case I am thinking to  go for two company code. One manufacturing & Other selling. What will be the pros & cons in this case.
    Thanks
    CHEERS

    Yes ! kishore You are obsolutly correct !
    Hi Nitin,
    As per my understanding your issue seems profit cannot be determined while sending goods sending plant to another palnt. For that SAP suggested to use Transfer pricing in Prrofit centre accouting & your valuation must be profit centre valuation not company code to get internal reports.
    Rgds
    ManiSuma

  • One payments for two company codes

    i would like to inform you how to post incoming payment when i have received amounts for differents company codes
    regards

    Guess you are trying to use F-28 (or something similar) to post the incoming payment. That will not allow what you want to do - split the incoming payment across two company codes.
    Try the generic FI txn - F-02 (or something similar), and simply choose a different company code for the credit line items.
    Dr Incoming Cash                            100
    .   Cr Customer 1 in Co Code A          80
    .   Cr Customer 2 in Co Code B          20
    The obvious complication here is that you won't be able to pick open invoices for the customers. You might have to knock off the open invoice items against these credit line items in a separate txn (F-32).
    Try it out and see if this suffices.
    Rgds
    Gulshan

  • AP - One Check for Vendor from two Company Codes

    Our Company would like to issue one check  for a vendor in two company codes.
    Configuration has the paying company code = sending company code.
    So the payment proposal will want to create two checks, one for each company code.
    Question --- Is there a way to generate one check for the one vendor in two company codes.
    Thank you,
    Jeffrey

    Dear Jeffrey,
    Let say there are two company codes 100 and 200, in the config, you will need to make paying company code for company code 100 = 100 and
    Paying company code for company code 200 = 100.
    you will need to set the Intercompany balancing account in Tcode OBYA.
    Once you do this, the other process remains the same. Should you have questions, let me know.
    Thanks
    Raghuram

  • Different Bank charges GL account for two company codes with same COA

    Hi,
    While configuring OBXK ( Automatic GL account for bank charges)  , I see there is provision to enter only one GL account per chart of accounts.
    We have two company codes using same chart of accounts but different bank charges GL account. Please tell me how to configure this.
    Thanks,
    suresh

    Hi,
    Thanks Krishnan and Chandra.
    I agree with you it could be the same GL account for bank charges, but the business requirement is such that in one of the two company codes, bank charges are required to be tracked separately to be subsequently transferred to the other company code. This means two separate GL accounts are required for two company codes which needs to be configured in OBXK.
    Hope this clarifies my query further.
    thanks,
    suresh

  • One PO for multiple company code

    Hi,
       I have one scenario,  we have two company code   X and Y,  now we want to purchase the UPS qty 1  and Battery qty 10, which will use by both the company now can we create one PO for both compnay code  on the vendor and the Cost should be divide between both the company code , and how to do the further Finance process like invocie verification giveinng payment to vendor etc.
       regards,
        zafar

    Hi,
    I have one scenario, we have two company code X and Y, now we want to purchase the UPS qty 1 and Battery qty 10, which will use by both the company now can we create one PO for both compnay code on the vendor and the Cost should be divide between both the company code , and how to do the further Finance process like invocie verification giveinng payment to vendor etc.
    Hi Zafar
    What I think is that you cannot make one PO for two company codes. Yes you can make two different PO for two company codes.
    As per the cosrt conern in a PO you can further divide it to as per Distribution i.e. Single account assignment, distribution on Qty & Distribution on %age and than you can define different-2 Cost centres and than invoice them as per rules.
    Please tell me if any doubt in this.
    Regards
    SS

  • Same material master in two company codes with batch management

    Hi,
    There are two company codes in one client. In one batch management is already active. But in another company code batch management is not required. Is it possible to have batch management active in one company code and inactive in another company code where both the co. codes are in the same client? The same material master to be used in both company codes.
    Thanks,
    Satya.

    Hi Satyabarata,
    As far as you dont want to move the same materiel i.eStock Transfer with Inter comapy billing scenario then it  will be fine.
    If you try to Transfer a Batch manged material into a non batch manged CC it will work fine. But on the other hand when do via-versa the system will ask for the Batch information where the Batch management is active.
    If you want to use same Material Master for both CC then its not advisable.
    Please let me know if you need any other information.
    Thx.
    MJ

  • One customer / vendor used to share by two company codes

    Hi experts,
    is there any possibility to share same vendor or customer in two different company codes?
    my client have two company codes 8000 and 9000 and that two company codes sharing the same customer /vendor  XXXXX.
    now they want to post the two company codes transactions to one customer/vendor.
    means when we open the customer /vendor line items  we should able to see two comapny codes transactions of that customer/vendor.
    plz advice.
    Thnaq,
    sandhya.

    yes it is the same way the SAP suggests- provided address is same.
    SAP vendor / customer has got two segments -
    General data - which is common for all company codes and is at client level data and stored in table KNA1 (customer) and LFA1 (vendor)
    Co code data- which is specific to company code - create as many views for each co code which are specific to co code decisions and accounting - and is stored in KNB1 (customer) & LFB1 (Vendor)
    In the same way Sales organisation and Purchase Organisation also stored separately.
    For creating Co code data, enter existing customer/vendor code and type co code and it will allow u to create both data.
    Hope this is of help to u

  • One trial balance out of two company codes

    Our clinet has two company codes in legacy system, now we are implimenting SAP.
    In legacy system, company codes are combined into one overall trail balance. Once in SAP they will there be two separate LEu2019s. Will they be required to apply transfer pricing methodology for intercompany movements between themselves ?.
    Please advise how to configure this?
    How to have a one trial balance out of two company codes?

    Please note you have a few questions - I would recommend a single post per question to make it easier for others to answer.
    Please note - people will not share config guides or notes so you may want to ask a particular question around transfer pricing.
    If you have 2 Company Codes in ERP 6, that have the same controlling Area, FSV you can produce trial balances for more than one company code by activating the new GL.
    It seems your client is new to SAP, therefore the new GL will be activated as standard. The standard transaction F.01 allows for a single trial balance for 2 company codes, that have the same CoA, Controlling Area and currency.

  • Two Company codes of ECC to One Org Struture of CRM

    hi CRM experts,
    can we map TWO company codes(Enterprise Structures) of ECC into One ORg Structure of CRM.
    if answer is yes...
    how to do the same..
    regards,
    SR

    Please note you have a few questions - I would recommend a single post per question to make it easier for others to answer.
    Please note - people will not share config guides or notes so you may want to ask a particular question around transfer pricing.
    If you have 2 Company Codes in ERP 6, that have the same controlling Area, FSV you can produce trial balances for more than one company code by activating the new GL.
    It seems your client is new to SAP, therefore the new GL will be activated as standard. The standard transaction F.01 allows for a single trial balance for 2 company codes, that have the same CoA, Controlling Area and currency.

  • Two company codes under one controlling Area

    In this client, we have two company codes under one controlling Area
    Will there be any authorisation issues (ie getting the information of other company code date) in Co reports (z reports, standard reports, report painter)?
    Any thoughts on this is helpful for me.
    Thanks
    Aruna

    HI,
    Authorization is a flexible tool used to have control as per organization policies.
    For your specific requiremnt u can set the profiles with Technicals persons help with the desired authorizations . Authorization can be set for single company code or multicompany codes as per our requirement.
    You can make a authorization profile/s and assign the desired roles.
    Warm Regards

  • One controlling area  with two company codes assigned with one CoA

    Hi,
    I   am having one controlling area  with two company codes assigned , i am using the same  gl for two company codes  as cost element , when i am positng the  miro for vendor purpose  it posted the error  , to avoid the  price difference purpose , i have given  one cost center  of  first company code in OKB9 , and  overcome the error , entries posted, when i am posting new entry for MIRO   in secod  company codes with same cost  element ,  price difference of that account should go to the other cost center  which specifically created for second company code,  in the OBK9 i have given  cost center first company code   of the same GL  account , now this is another new entry in the second company code with other cost center in the second company code  since the price difference  account should sit in the other cost center of second company code,  how to  over come  this problem, pls help me
    Thanks and regards
    Murugesan

    Hi,
    First, remove the default cost center in the cost element. Then, for the system to derive the correct cost center for each company codes, define one cost center for each compny codes in OKB9 just like this:
    Co Code   Cost Element   Cost Center
    1000          1000000              A
    2000          1000000              B
    So during MIRO, the system will derive these values you maintain in OKB9.
    Regards,

  • Merging two company codes

    Dear All,
    We have two company codes with in the same company. In going forward we are going to discontinue one company code. Each company code is having 14 manufacturing plants. We want to merge these 14 plants to single company code.
    Kindly suggest which are the possibilities are available and which one is better for FI and MM point of view.
    Regards
    Venkey

    Dear,
    Execution of this really a though provoking but to breif you the overview.....
    FI Consideration.
    You will have transfer entire trial balance to the other company code ensure the balance in company code is zero.
    MM Consideration.
    Only one company code can be assinged to one plant. One plant can not have more that one company code. You may have to create a dummy plant to transfer all the material and once material quantities in transferee plant is zero, you can deattach plant to the other company code and redo the activity.
    For MM activities, please work with your MM counterpart and take his/her expert advise.
    Regards,
    Chintan Joshi

Maybe you are looking for