One material type assign with multiple valuation class

Dear All,
One material type assign with the multiple valuation class.it is possible.what is defuclty for that.
pls, explan.
Regards,
Ranjeet

Hi,
ABC 3040 - spare mach BSX ( G/ L )- Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3040--G/L account
XYZ 3041 - spare mach BSX ( G/ L )-Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3041--G/L account
ABC 3040 - store consumable GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3040-G/L Account(cr)-G/L Account (Dr)
ABC 3040 - repair and maintanance GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3041-G/L Account(cr)-G/L Account (Dr)
Regards,
Deepak.

Similar Messages

Two Valuation Class for one material type which is split valuated

hi , I have a material number which is split valuated like Capital & Revenue. There are seperate inventory GL accounts for both Capital & Revenue. So whenever material is procured based on the nature either Capital or Revenue , Corresponding Inventory GL account gets debited. How t

It is very much possible. Material type is linked with Valution class by account category reference and has many to many relationships. Valution type is linked with account category reference.
1 You create the material at valuation category level in MM01
2 Extend the material for Val type 1 with Val cls 1 in accounting view
3 Extend the material for val type 2 with val cls 2 in accounting view
for example
If you have valution type IN & EX linked with ROH material type via account category reference then you have the option to selecte valution classes 3000, 3001, 3002, 3003 in Std SAP. You have to make sure that Automatic account determination setting are correct for the valustion classes selected in OBYC.
Hope it helps
Karthi

Material type with Different valuation class and gl assignment

Hi Experts
I have several division in Material Type Spare Parts ( like Generator, Electrical, Mechanical). I have to assign different gl account for each material type. We know one material type is assigned only one account category reference. So how we can assign different gl account for same material type using valuation class.

You can assign different G/Ls to different materials by creating valuation classes and assigning different G/Ls to those valuation classes and then assigning those valuation classes to materials.
You cannot assign G/Ls to material type.
Now if you want different G/Ls to be assigned to same material, you need to use split valuation.

How to shift valuation class from one material type to another material type ?

I have came across following weird scenario:
We already created huge no.of materials of material type say ZABC with two valuation classes say 1100 and 1200(GL accounts for these VCs for different posting keys in OBYC settings are same). Account category reference for this material type is 0010.
After that we created new material type say ZPQR with new Account category reference 0025, and valuation class 1200 is linked with this ACR 0025. Because of this, valuation class 1200 disappeared from material type ZABC. In order to avoid inconsistency, we need to have valuation class 1200 linked with older material type i.e.ZABC.How we can do this ? What impacts must have happened in this period (from MM/FI) in the system, where valuation class get shifted from one material type(ZABC) to another material type(ZPQR)....please help us in this scenario.

Thanks Sana,
We are also looking for the solution provided by you i.e. reassign ACR 0010 to Valuation class 1200.
Your are also correct in terms of statement "config doesnt allow me to assign same valuation class to 2 different AREF (Account reference number/Account category reference).
I wanted to know, what are the possible impacts in the system during this re-assignment of ACR to old material type ZABC.
Regards,
Sudarshan.

Split valuation but category is grey in one material type

hi,
i met a strange things about field "valuation category" in material master. in our plant, we active split valuation, and all the setting is ok.
but when i create a material with material type FERT, the field valuation category is grey, can't enter value, but if i changed the material type, then can enter the category value. i check the field in field group are all the same setting that is option by T-CODE, industry, field reference, plant and etc.
so i don't konw why one type can enter value but another type is grey?

Hi,
Please check the Split Valuation settings are as follow:
1.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Acitvate Split Valuation
2.SPRO> MM>VALN AND ACC ASSIGNMENT> SPLIT VALUATION> Configure Split Valuation
Click on Golbal type: create your own valuation types as Type 1, Type 2 etc
Click on Global categories:create your own Valuation Category as Type(T) and
Activate all valuation types(Type1, Type2 ) for your category(T)
You can also check FERT material type and acct. cat. reference.Also you can again verify in OMSR get field group,OMS9, enter material type and check the field is required or hide and then change according to ur requirement& save.
Regards,
Biju K
Message was edited by:
Bijay Kumar Barik

Tcode MB1B (Transfer Postings) material with different Valuation class

Hi,
is it possible to avoide tcoce MB1B for material with different valuation class?
Materia1 (001000) has valuation class: 3000
Materia2 (300000) has valuation class: 7900
I don't want allowed MB1B with Material1 (3000) to Material2 (7900).
Thanks.
regards, Dieter

Hi,
Yes, It is possible to avoide tcoce MB1B for material with different valuation class.
Regards
Md.MahaboobKhan

Back posting only possible with same valuation class

Hii, I made changes in valuation class before that i closed all the open po and maintained stock zero using 201 mvt type on 31st March. Now the system is throwing error when Im doing the reversal using MB1A 202 mvt type like "Back posting only possible with same valuation class". But its taking if I take the Posting date to 1st April, and we want to post on the 31st MArch. Please provide the suggestion.
Thanks,
Manoj

System is behaving correctly..
Suppose you have changed the valuation class from X to Y as on 31.03.2014.
So your valuation class was X as on 31.03.2014.
But now your valuation class is changed as Y. and system will always try to post the valuation class Y for material.
So when you are trying to reverse the entry on 31.03.2014, system shows the error..
In that case, you should change the valuation class as on 30.03.2014 and you should do 201 movement type as on 30.03.2014, and then as on 31.03.2014, you can reverse the entry..
Now you have to reverse the 201 movement type after date 31.03.2014.
Regards
Dev

Material Transfer From one Material Type to another should not be possible

Dear Gurus ,
I have a issue here i want to lock the transfer posting from one Material Type to Another Material Type . The point is the Transefr Posting Shuold happen from same Material Type . So can anybody help me out that what should I do for the same

Hi ,
I tried for the same but its not working . I just kept a Break point in this exit . Tried to transfer from MB1B its not stopping at the Break Point Can U suggest as I am doing it from MB1B .
Regards
Shankar

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Can one Condition type can have multiple access sequence?

hi,
Can one Condition type can have multiple access sequence?

Hello,
You can have one access sequence for condition type, but an access sequence can have more than one accesses.
Prase

Multiple account assignment with non valuated gr

hi,
For multiple account assignement - One PO - MORE THAN ONE ASSETS - the GRN becomes "non valuated " (automatically- the field is grayed out). The account document will not be generated. The asset value will be captured on the MIRO date.
pls explain why system behave like this?
regards
sumit simran

Hi,
Yes for asset GRN always non-valuated
check following sap not also
Note 9175 - No value update is performed for goods movements
check setting of OMS9 for asset A you will get clear idea
check following link also
[Asset PO;
Regards
Kailas Ugale

Best Material Type for Handling Non-valuated Materials in Distribution

Our distribution business will soon be handling non-valuated material and I am trying to determine the best material type to use. I am considering material type UNBW but would like to know if anyone has advice. We are strictly providing a service to the vendor for handling these non-valuated materials (for example, wood products). We will not purchase or sell the product. Our service consists of receiving the product into inventory from the vendor, tracking the inventory, (in Warehouse Management) and then shipping the material to a customer of the vendor's choosing. For these non-valuating materials, we are paid strictly for our service of warehousing the material and shipping to a customer.
Up until now, our distribution business has distributed only valuated materials, i.e., materials we purchase at a price and sell at a price. We also use vendor consignment. NOTE: This is not a vendor consignment scenario because we never buy the product.
Here are our requirements:
- We don't own the non-valuated product.
- We need to be able to ship these new non-valuated products on the same shipments as the valuated product we own.
- We use handling unit and warehouse management for all of our finished goods.
- We would like to use our existing processes and HU/WM RF transactions to receive and pick the non-valuated product. This means:
1) Creating inbound deliveries and packing into HUs. And applying our HU bar code labels.
2) Physical inventory counts by HU.
3) Creating sales orders that have both the non-valuated materials and valuated materials we own.
4) Creating outbound deliveries and picking via transfer orders in WM.
5) Assigning the outbound deliveries to a shipment.
Questions:
1) Can a UNBW material that will be stocked but not valuated be received into inventory via a PO? Any way to receive into inventory with an inbound delivery without using a PO?
2) Are there any problems with putting a non-valuated material on a sales order with a zero price?
3) Any challenges that other have run into?
Thanks in advance.
Rob

I must be missing something regarding the use of material type UNBW. When I post the goods receipt for a PO with a UNBW material, no inventory is created. When I create the PO, an account assignment is required. I tried both a cost center account assignment (K) and balance sheet account assignment (Z - using a Profit Center). In both cases, I am forced to check the "Free item" checkbox to avoid entering a price; which also seems strange since the material is UNBW.
I have searched everywhere for a "Best Practice" for my scenario with little results. Again, we are simply managing the inventory for a vendor and shipping the inventory to our vendor's customers. So we are acting as a third pary warehouse and shipper for the vendor. We do not buy or sell the inventory - we are paid a monthly service fee by the vendor for warehousing their product and shipping it to their customers. We may ship the product on sales order deliiveries that include both the "non-valuated" product (i.e., free goods we manage for this vendor) and goods that we actually own.
As an alternative, I am wondering if I should look into somehow using vendor consignment with a settlement price (consignment info record price) of zero. Vendor consignment is nice because you can track the stock by vendor. However, we would never truly "settle" with the vendor because we would not be paying the vendor for the inventory and would never own it.
Our business refers to this as "reload business" but I am not sure this is an industry standard term.
Any other thoughts out there?

Does moving average price work with multiple valuations?

Dear All,
I have activated multiple valuations: Legal, group and profit center.
I have activated ML/Actual costing for this multiple valuations too.
Now I have 3 price fields in material master.
Could I use moving average price for some materials types in multiple valuations?
Thank you,
With best regards,
Kamila.

Hi Kamila,
yes, ML is always activated for all materials in a plant. To use MAP you have to set the price determination of a material to '2':
This is the F1 help of the field price determination:
Material Price Determination: Control
Specifies how the material price determination should procede.
You have the following options:
With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.
Dependencies
The indicator is only of use if the material ledger is active.
Upon activating a valuation area for the Material Ledger in Customizing, you can enter what type of material price determination will be proposed when creating a material in that valuation area. This proposal will be ignored at production startup: the system automatically sets the indicator to 2 in the material master for all materials present.
If you want to change the indicator for a particular material later, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Environment -> Change Material Price Determination.
best regards,
Udo

Reg: Document type should allow only one Material Type or a number series

Dear Experts,
In my project , clients requirement is to restrict the Material Type or the number range assigned to a Matreial Type for a perticular PO Document Type. We have one document type for Local Work Order -YLWO in which we want to enter the DIEN material type material code only. since we want to use the Po document type to procure service from local vendor and same time we dont want to use the SERVICE Entry Sheet for the external service. Please guide me...
My opinion is -- We can try with USEREXIT or BADI.
If I am right then can any body suggest me Badi or USEREXIT name....
We are using 4.6C so I am facing some problem .
Thanks in advance.
Regards
Dibya

Check the following BADI with your ABAP Consultant
ME_PROCESS_PO_CUST
I have used this BADI for controlling the type of vendors according to PO document type. Currently I do not have access key to check the fields in this user exit. Check with your ABAPER on this whether it can fulfill your requirement.
The use of item category D results into the service entry sheet. If you want to use DIEN material type then you have to do GR.
what is the difference from your requirement ???
Service entry sheet is nothing but the GR only.
DEIN material type is used basically from SD or Customer service module.
please make clear to forum what is your some problem by using 4.6C. It is too generic a statement.

How can identify those entries which is assigned in wrong Valuation Class

Hi,
In our Material Master Data, we have maintained wrong Valuation Class against Material Group. Now consumption and all things related to those material's going in wrong GL.
Now, we have total number of wrongly created Material number according to Material Group and correct Valuation class.
Please tell me how can we identify those entries which is related to wrong assigned valuation class. ....
Pleas guide...

Thanks dear...
Please confirm that in Tcode MR51, contains only wrongly assigned entries...
Also in MR51 output, valuation class not showing... Is it possible to add in it...
Regards.

One material type assign with multiple valuation class

Similar Messages

Maybe you are looking for