One Monitor per mailbox?

I have a Windows switcher client coming from Eudora (yuck) to hopefully Apple Mail. For years he's had two email accounts using two instances of (Windows) Eudora, one on each of two monitors so he can glance between the two accounts constantly.
I was hoping to move him to the 21st century and load both accounts into Apple Mail (imap) so he can conveniently switch between both accounts like a normal human being. But he's insisting on keeping his two monitor/email account setup. It's a nightmare to maintain and I was hoping to move him off of Eudora.
Someone please tell me there is a way to open Apple Mail inboxes on separate monitors...please....
-gb

Yes, In mail, select either cmd-option-n or Mail > File > new viewer window.
Then drag the 2nd window to the other screen.
Cheers.
Message was edited by: captfred

Similar Messages

One Monitor / Window Per Video Track? Possible?

I really need to sync multiple video tracks / clips and Multicamera will not work.
It would be nice it Video Track One / Two / Etc. had their own window.
I could place them where I want .. and adjust the many clips to where I want them .. without switch back and forth to the program / source monitors.
Has anyone else figured this out?

There is a Source, Program, and Reference Monitor .. a trim monitor .. and a multi camera monitor .. but all I want is a monitor per track .. and a overall monitor.
It would be nice to duplicate them too .. to have a set of small thumbnails .. and then larger ones on a second monitor.

Best Practice for VPC Domain failover with One M2 per N7K switch and 2 sups

I Have been testing some failover scenarios with 4 nexus 7000 switches with an M2 and an F2 card in each. Each Nexus has two supervisor modules.
I have 3 VDC's Admin, F2 and M2
all ports in the M2 are in the M2 VDC and all ports on the F2 are in the F2 VDC.
All vPC's are connected on the M2 cards, configured in the M2 VDC
We have 2 Nexus representing each "site"
In one site we have a vPC domain "100"
The vPC Peer link is connected on ports E1/3 and E1/4 in Port channel 100
The peer-keepalive is configured to use the management ports. This is patched in both Sups into our 3750s. (this is will eventually be on a management out of band switch)
Please see the diagram.
There are 2 vPC's 1&2 connected at each site which represent the virtual port channels that connect back to a pair of 3750X's (the layer 2 switch icons in the diagram.)
There is also the third vPC that connects the 4 Nexus's together. (po172)
We are stretching vlan 900 across the "sites" and would like to keep spanning tree out of this as much as we can, and minimise outages based on link failures, module failures, switch failures, sup failures etc..
ONLY the management vlan (100,101) is allowed on the port-channel between the 3750's, so vlan 900 spanning tree shouldnt have to make this decision.
We are only concerned about layer two for this part of the testing.
As we are connecting the vPC peer link to only one module in each switch (a sinlge) M2 we have configured object tracking as follows:
n7k-1(config)#track 1 interface ethernet 1/1 line-protocol
n7k-1(config)#track 2 interface ethernet 1/2 line-protocol
n7k-1(config)#track 5 interface ethernet 1/5 line-protocol
track 101 list boolean OR
n7k-1(config-track)# object 1
n7k-1(config-track)# object 2
n7k-1(config-track)# object 5
n7k-1(config-track)# end
n7k-1(config)# vpc domain 101
n7k-1(config-vpc-domain)# track 101
The other site is the same, just 100 instead of 101.
We are not tracking port channel 101, not the member interfaces of this port channel as this is the peer link and apparently tracking upstream interfaces and the peer link is only necessary when you have ONE link and one module per switch.
As the interfaces we are tracking are member ports of a vPC, is this a chicken and egg scenario when seeing if these 3 interfaces are up? or is line-protocol purely layer 1 - so that the vPC isnt downing these member ports at layer 2 when it sees a local vPC domain failure, so that the track fails?
I see most people are monitoring upstream layer3 ports that connect back to a core? what about what we are doing monitoring upstream(the 3750's) & downstream layer2 (the other site) - that are part of the very vPC we are trying to protect?
We wanted all 3 of these to be down, for example if the local M2 card failed, the keepalive would send the message to the remote peer to take over.
What are the best practices here? Which objects should we be tracking? Should we also track the perr-link Port channel101?
We saw minimal outages using this design. when reloading the M2 modules, usually 1 -3 pings lost between the laptops in the diff sites across the stretched vlan. Obviously no outages when breaking any link in a vPC
Any wisdom would be greatly appreciated.
Nick

Nick,
I was not talking about the mgmt0 interface. The vlan that you are testing will have a link blocked between the two 3750 port-channel if the root is on the nexus vPC pair.
Logically your topology is like this:
| |
| Nexus Pair |
3750-1-----------------------3750-2
Since you have this triangle setup one of the links will be in blocking state for any vlan configured on these devices.
When you are talking about vPC and L3 are you talking about L3 routing protocols or just intervaln routing.
Intervlan routing is fine. Running L3 routing protocols over the peer-link and forming an adjaceny with an router upstream using L2 links is not recommended. Teh following link should give you an idea about what I am talking here:
http://bradhedlund.com/2010/12/16/routing-over-nexus-7000-vpc-peer-link-yes-and-no/
HSRP is fine.
As mentioned tracking feature purpose is to avoid block hole of traffic. It completely depends on your network setup. Don't think you would be needing to track all the interfaces.
JayaKrishna

G4 upgrade now one monitor won't power on

ANY HELP WOULD BE APPRECIATED! I'VE BEEN UP ALL NIGHT!!
I put in 2GB of RAM today along with a super combo (DVD, CDRW) drive. I tested the machine with a single monitor at work, it was fine. When I got it home and hooked it up to my dual monitors, only one monitor turns on. The other one won't do anything. Now power to it at all. I tried plugging it directly into the wall, still nothing.
I switched the cords and everything and the same monitor (the one on left) turns on, but the one on the right doesn't. Can anyone help? When I detect displays, it shows I have two monitors, but I am only getting power to one. I also reset the PRAM, still did not power up my monitor.
Is there a workaround here or should I send it back? It's under warranty and everything. GoVideo Dual 19" monitors. Has anyone dealt with sending something back to Wal-Mart? Is it fast to get the replacement?
These are the specs of my machine:
MAC OS X Ver 10.4.11
1GHZ PowerPC G4
2MB L3 Cache
2GB SDRAM
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
ATA Bus:
Maxtor 6E040L0:
Capacity: 38.29 GB
Model: Maxtor 6E040L0
Revision: NAR61HA0
Serial Number: E1162VNN
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Verified
PIONEER DVD-RW DVR-115D:
Firmware Revision: 1.18
Interconnect: ATAPI
Burn Support: Yes (Unsupported)
Profile Path: None
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
ATI Radeon 9200:
Chipset Model: ATY,RV280
Type: Display
Bus: PCI
Slot: SLOT-D
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x5960
Revision ID: 0x0001
ROM Revision: 113-A27502-124
Displays:
PV1910:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

"I \[powered Off and unplugged my G4 Mac] and put in \[some new stuff, NOT including a new battery], \[and now some stuff won't work]."
step 1: reset the PRAM/PMU:
HT1939- Resetting Cuda/PMU on Power Mac G5, Power Mac G4, Power Macintosh G3
step 2: get a new 1/2 AA size 3.6 volt battery, install it, and reset the PRAM/PMU again.

Exchange liscences, per mailbox or per concurrent connections

can anyone confirm, ideally with evidence via a microsoft link, as to whether exchange 2010 server client access liscences are per user, or per mailbox, i.e. if you have 300 mailboxes, you need 300 cals, whereas if you only have 150 concurrent connections
to the mailbox server at any one time, you only need 150 cals.
Also if its per mailbox, what are the rules on ex employee mailboxes, that are sat on the mailbox server, but not being actively accessed. Do they still require a CAL, or can they be flagged as disconnected or something?

Hi,
A user with multiple mailboxes requires only one CAL. In contrast, if multiple users access the same mailbox, each user needs his or her own CAL, unless the user is accessing that mailbox from a single device licensed with a Device CAL.
A better explanation is provided here:
http://www.microsoft.com/en-in/licensing/about-licensing/client-access-license.aspx
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Ho do I use one monitor for OSX and Windows 8.1 bootcamp

I am a long time Mac user, but find the fairly recent Apple switch to thunderbolt for monitor input very frustrating.
For several years I have ran a Mid 2010 IMac 27" and input video from a Mac Mini running Boot Camp Windows 7 using Target Display Mode on the IMac.
This worked fine until I upgraded to a Late 2013 27" IMac and discovered that the IMac has moved to thunderbolt as the input for Target Display Mode. The new late 2013 27" IMac just will not display native Windows 7 or 8 from a Boot Camp Mac anymore.
My problem is that I have two business/job related Windows apps that must run on a native windows 7 or 8 platform, and won't function under either Parallels or VMWare Fusion.
I have tried.
And there appears to be no way to get any Windows machine with DVI or Mini Display Port output to drive a late 2013 IMac in Target Display mode.
So, with great frustration, I have concluded that I need to purchase a non-Apple 27-30" monitor, and drive it with either a Mac Mini, or my Early 2013 15" MacBook Pro retina, running one of the Macs into on of the mini-Display Ports on the monitor and a native Windows 7 or 8 machine into a second mini-display port, switching between the two video inputs. The Dell 30" monitor seems to get the nod.
Has anyone found a better solution to switching between OSX and native Windows on one monitor?
Thanks...

Hi William,
I had the same experience in December 2013 and contacted Apple about it. According to Apple it's an issue of Windows with Thunderbolt. Your older iMac from 2010 is using DisplayPort and not Thunderbolt for the Target Display Mode. Note that just the connector looks the same but it's still a different technology. Please further note that the response below does not apply for the new iMac 27" with the 5K display because this iMac does not support Target Display Mode at all, hence can't be used as external display. Of course you can still attach one or two external displays to the iMac 27" 5K.
Hope this clears things up for you and the others.
Thanks,
Martin
So, here is the important part of the official response from Apple:
"... The Thunderbolt controller in an iMac is running exclusively in host mode. As such it cannot emulate a device mode Thunderbolt display. Instead it implements a custom Target Display Mode protocol that shares video between two peer to peer machines running with both controllers running in host mode. The "client" side of the driver does not exist on Windows so windows cannot speak to the "server" half in the iMac. There are no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows. The reason this used to work is that the older iMacs used DisplayPort for Target Display Mode. In this scenario the iMac was able to expose the panel in such a way that it looked exactly like a Display Port Device which Windows does have driver support for. ... "
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

Delivery from sales scheduling agreement with one item per schedule line

Hi all,
I have a sales scheduling agreement where the same part number has 3 different JIT schedule lines and I need to create a delivery with 3 item lines: every item line of the delivery has to be referred to one schedule line of the scheduling agreement.
When I create the delivery with transaction VL10E it has only one item line and its quantity is the sum of the 3 schedule lines of the sales scheduling agreement.
I've tried to change the customizing of the User Role, choosing the Split Schedule Line = 2 ("One item per schedule line") but the delivery is created again with only one item line.
How can I solve this issue?
Thanks in advance for reply

Dear Alex
The SAP standard behaviour is that all schedule items with delivery date in the past have to be rescheduled anyway to one date and are combined therefore.
Partially this behaviour can be influenced in VL10* by 2 parameters in
the user role : Split per sched.line and Rule (delivery qty).
Please find below informations about these different parameters
"Split per sched.line propose you 3 Rule for creating one delivery item
per schedule line. In a delivery list in item view with multiple
schedule lines, you can decide for the same document item whether you
want to generate one delivery item per schedule line or whether you want
to deliver the cumulated quantity of the last schedule lines selected.
About rule for delivery quantity, the following rules are currently
implemented:
1. No cumulation
The open schedule line quantity to be delivered is the quantity at which
the list line is delivered.
2. Sum of all open schedule line quantities to be delivered that fall
before the chronologically latest date in the to field (following the
Deliv. creation date field) of the selection criteria.
3. Sum of all open schedule line quantities to be delivered whose
delivery creation date falls within the selection time frame (between
the dates in the Deliv. creation date and to fields, respectively),
making the calculation of the quantity to be delivered consistent with
selection criteria. However, calculationof the quantities delivered with
the order's schedule line quantities is not affected."
Hope this helps.
Regards
Tonia

Can I have more than one iphone per email account?

When my son got his iphone 4s I used my email address since he didnt have one yet. I have since gotten an Iphone 4s also, but when I went to activate it I had to put it under another email account, since mine was used for my sons iphone, so I used my husbands. My husband now has an iphone on order and I was wondering if there was a way of having more than one phone per email account?

I would set up a new email for him. That will give you a new icloud account. Also any apps that he downloaded with your ID will forever be linked to that ID and can only be updated with that ID. If that is a problem then you might delete those apps and download them again with the new ID ( and if they were paid apps you need to pay again)

How can I view more than one result on the screen when I search for apps? eg I search for my hobby and there are over 1500 results - one result per screen - do I have to swipe 1500 times to see them all?

I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!

Bump:)
But I've found some online reviews of this and I think we
are stuck with this amazingly awful search system until
they realize people like me won't bother searching for or buying
Apps.
Does a novel display one sentence per page?
Do you listen to a radio documentary that transmits one word a minute?
Or how about a song that is broken into four parts because the singers ran out of breath?
Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
Woe is me!
Woe are we!

How can I change the resolution of one monitor in a dual monitor set up?

I'm trying to help someone set up an extended desktop using two monitors connected to a mac mini. One monitor is at the maximum resolution, but the other is not, and thus feels enlarged or zoomed in. I know a higher resolution is possible because the monitor has a button menu that shows a higher resolution, but it seems to be disabled - as I cannot select the maximum.
Also can't seem to change it under the mac mini's display preferences.
Any suggestions? We would really appreciate it.

This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display
The HDMI connection does not support higher than 1920X1200
What resolutions are running now and on what connection and what is the grayed-out resolution?

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?

How do I use dual displays to have a full screen app on one monitor and another full screen app or the desktop on the other?
I want to have my itunes visualizer on my TV which is connected via HDMI adapter, and still have access to full screen itunes and my desktop on the main display.
Any suggestions? App downloads that can do this? Please let me know.

You can't do it. This has been an issue since Lion.

How to transfer from one mini to another without messing up either one. I have one monitor and two minis. I do have a firewire cable but don't want a complete transfer, just specific files.

I have done a complete fire wire transfer before but I don't want to do that. I only want to transfer certain files and leave the existing and new minis in tact otherwise. I am sure I can transfer just files. My question mostly is: I only have one monitor but will have two minis that are hooked up. Can this be done without seeing the other computer contents? I hope that makes sense. The existing mini is 10.5.8 and the new one is 10.6.

You can start one mac up in target disk mode, get file sharing set up and then disconnect the monitor. Monitor ports are very tolerant of connecting and disconnecting with the computer on.
Switch the monitor to the other computer. Start up, connect the firewire cable (after the computer has booted) and set up file sharing on that computer. You can see the other computer's contents without controlling the other computer's mouse and/or keyboard.
If the other computer's hard drive does not automatically show up, go to network settings and verify those settings as well. That should not be necessary but ethernet would give you a second option for file transfers.
Ji~m

DUAL MONITOR BUG: One Picture – One Monitor – Different Colors!

There have been several threads discussing that Photoshop CS4 and OS 10.6. show wrong colors in dual monitor setups.
The first one to prove this with a screen capture was jb510-LJ0JJQ in August 2009: http://forums.adobe.com/message/2207312#2207312
Eight months and three OS updates later the problem is still there and makes professional work with more than one monitor a nuisance.
Here's another actual example: A picture and its 100% identical copy showing different colors on one screen!
Here's how to repeat it – try this at home ;-)
1) In the finder make a copy of a rgb picture.
2) Open one of the two identical pics in photoshop.
3) Drag it to the other monitor.
When releasing the mouse button you may see the bug already: the colors will "switch".
4) To verify this go to system presets - monitors - and change the primary monitor (by dragging the menu bar to the other)
5) Now open the identical copy you made in step 1) and see the difference!
Here's a synopsis of suggested workarounds:
1) disable open GL (which seem to makes no difference on my setup)
2) click "desaturate monitor colors" but set desaturation to 0 (which prevents visual switching in step 3) (only if openGL is ON) but also leads to a wrong display in step 4+5
3) make the hardware calibrated monitor your default monitor and strictly avoid changes or dragging pics to the other monitor (which seems to be the only reliable method)
4) some guys even force both monitors to use the profile of their hardware-calibrated monitor (using color sync) to make sure they see what they should see on at least that one monitor. What a stone-age workaround for the the world's leading imaging program!
Considering that reliable colors in professional (=multi monitor) settings should be the most basic function of photoshop this mayor malfunction should be solved with CS5! Otherwise we might have to live with it for some more years...
Have Adobe and Apple realized this bug and on their agenda? Will it be gone with OS 10.6.3? Can anyone explain the reasons for this bad bug? Is there a "officially" recommended workaround?
Thanks, regards,
Eric

There have been several threads dealing with this malfunction. But most faded out in silence or acceptance of the workarounds.
http://forums.adobe.com/message/2207312#2207312
http://forums.adobe.com/thread/521483
http://forums.adobe.com/message/2272192#2272192
http://forums.adobe.com/thread/311761?start=0&tstart=0
http://forums.adobe.com/thread/618927?tstart=60
http://forums.adobe.com/thread/603992?tstart=90
http://www.wetcanvas.com/forums/showthread.php?t=552977
http://www.hilfdirselbst.ch/gforum/gforum.cgi?post=368889?search_string=zwei%20monitor#368 889
But man, this is no minor bug! Consistent colors are the by far most important basic function of photoshop. If you cannot rely on the colors in photoshop you can as well use "Preview" and "Word" for print production ;-)
Carson, how did Apple react to your complaint? What do you mean with "they don't get it". Do they not see it? Or can't they get it right?
Shall we open a thread at apple forums to point out that it's not the problem of a single user?

How to divide all textFrames in one-character-per-textFrame?

Hello:
How to divide all textFrames in one-character-per-textFrame?
Example: the textFrame "Letters" will be divided in 7 textFrames: "L", "e", "t", "t", "e", "r", "s".
Help, please.

Hi Paul, try this one
#target Illustrator
// script.name = splitSelectedFramesIntoWords2.0.jsx;
// script.description = splits selected texFrames into separate words;
// script.required = select point text textFrames before running;
// script.parent = CarlosCanto; // 10/14/11
// script.elegant = false;
var idoc = app.activeDocument;
var sel = idoc.selection; // get selection
var selCount = sel.length; // count items
var tFrames = []; // to hold the textFrames
for (j=selCount ; j>0 ; j--) // loop thru selection & get textFrames backwards
                    tFrames[j-1] = sel[j-1];
for (k = 0 ; k<tFrames.length ; k++) // loop thru textFrames
                    var xpos = tFrames[k].position[0]; // get x
                    var ypos = tFrames[k].position[1]; // get y
                    var words = tFrames[k].contents.split(/\s/g); // get all words into an array
                    //$.writeln(words);
                    var space = tFrames[k].duplicate(); // dup to get width of a space
                    space.contents = " ";
                    var sw = space.width;
                    space.contents = words[0]; // replace space with first word
                    var w = space.width;
                    var wordCount = words.length; // count words
                    for (i=1; i<wordCount ; i++) // loop thru words
                                        xpos2 = xpos+w+sw; // next words position = previous word pos+width+space
                                        var iword = space.duplicate(); // duplicate previous word
                                        iword.contents = words[i]; // add next word
                                        iword.position = [xpos2,ypos]; // position the character = original position + new width
                                        w = iword.width; // get words width
                                        xpos = iword.position[0]; // get words position
                    tFrames[k].remove(); // remove textFrame

One Monitor per mailbox?

Similar Messages

Maybe you are looking for