One more crazy question:Turbo Boost and Middletion BIOS

I guest my mind is crazy.
Have anyone tried this combination in a TP61?
Cheers
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock
Solved!
Go to Solution.

Sure you are correct. A SSD drive will be better and I will get to it perhaps. The turbo module era came and went rather rapidly especially because of the others complicating technologies such as AF and the poor attention given to the necessary drivers. I am just curious if the Middletion BIOS allowing SATA II or III (not sure) on the AF HDD (1 and 1.5 Terabytes are), which are suppose to be compliant, does improve performance on them.
In:
http://t61.wikispaces.com/
there is no reference to that.
Thanks for your comment.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

Similar Messages

Turbo Boost and Eco buttons don't work on MSI GX660R 060US

When I try to download the Turbo boost driver, I get the following error:
" This computer does not meet the minimum requires for installing the software".
Help! How can I get the Turbo Boost and Eco buttons to work?

install sbar and nvidia oc tool to make the turbo button work. As of intel turbo boost there is no such driver or software because its purely dos based not os the intel boost will kick in when you have some free core to boost in.. as of eco mode pls descrIbe more

Dv7 turbo boost and temperature question

I have the core i7 2630QM @ 2.0 ghz with turbo boost up to 2.9 ghz. My question is, even while running prime95 (all 8 threads at 100% usage), cpu-z says the processor only gets up to 2.6 ghz. Now its not really a big deal because even at that speed almost nothing can max it out, im just curious why its not getting all the way up there.
And now its time to discuss temperature...even after just 15 mins of prime95, all 4 cores of my cpu were up to 80 degrees celcius and the motherboard sensor said 82...that's rather high isnt it? While im gaming all temps hover at around 70 or 75 degrees...is that near the danger zone? I appreciate any answers! thanks

krrmit
I don't think there is any way to turn these off. The processor will use hyperthreading and powerboost automatically depending on the load on the CPU and whether it needs hyperthreading and powerboost. Powerboost is used for heavy graphics if I'm not mistaken.
Joseph

Hyper-V stopped turbo boost and cpu park on my intel 4702mq processor?

Hi I just got my lenovo thinkpad e540(core i7 4702mq ,256 hyper-x ssd, nvidea geforce 2gb...)
I installed windows 8.1 and server 2012 r2 to separate personal and business use.
The cpu was running at many speeds to preserve battery life (between 0.7ghz and 3.2ghz on turbo boost). After installing the hyper-v role, the speed in task manager is stale at 2.19ghz and
all the cores are not being parked even when the system is idle, is this a bug or that's just how virtualization work??
Thanks!!

Quote from: NovJoe on 22-November-09, 01:24:35
Performance mode probably means having higher voltages or higher "optimized" settings to run the system. Fail safe mode already spelt out its intentions to keep the system from failing.
For details, you can contact MSI for more information.
As I stated in my first post, I carefully went through all of the BIOS settings and the only thing I could find different between 'default' and 'optimized' is the setting for 'Intel Turbo Boost'.
I will post a question on the BIOS board about any other differences, but until then my original question remains...
...does anyone know of any problems (and hopefully FIXES) with the P55-GD80 and Intel Turbo Boost?

Speedstep or Turbo Boost and Logic CPU Meters

I'm currently weighing up selling my remainding outboard synths and going the plugin route, so last night i loaded logic up with as many plugins as i would normally use in the equivalent of hardware audio tracks to get an idea on CPU Usage, Heat build up etc. (I run on a macbook pro in clamshell to external monitor).
Just to note, i don't normally run with the CPU meter displayed so this is all quite new to see what's going on under the hood, especially as i was making a point to watch it.
What i noticed was that the CPU meter went up very quickly to about 20-30% across all cores after the initial plugins that i loaded up.. But after that point i could load several audio units and record with them, yet they were using nowhere near the same kind of overhead the initial few used.... Dare i say it, they were hardly noticable on the load.
Now, i know that intel processors have had speedstep in the past which would slow your cpu down until the demand was there, and i'm aware that the modern cpu's have Turbo Boost which increases the core speed if required.
So, what i'm curious to know is that do plugins generally cache and have less draw on a system in multiples, or is this a case of my CPU ramping up it's capability the more i pushed it?

hey fmortz,
could you go to > http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70498
and do a bios update.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Connecting to the internet + one more Macbook question

I've just noticed that I haven't updated my profile, but I am no longer using an eMac. That machine just died on me, so I've purchased my first Macbook. I've also moved into a new apartment, and cannot get connecting using the apartment's existing ethernet connection.
My girlfriend has a cable modem and uses an ethernet cable to connect her PC. Our compters are on the same table, so we share the ethernet cable. But when I plug it ino my Macbook, no dice. Can't reach the internet. Any clues? I don't know a lot about internet connections, but I have my network settings set for a DHCP connection, and I'm told that it's all set correctly and should work. Maybe my girlfriend's connection only allows for one computer in the apartment?
One more question: I don't like the color scheme on this new Macbook as much as I did my old eMac. On this one, the whites (for instance, the background of this page) seem "too white." So much so that it hurts my eyes. When I turn the brightness down, it makes the blues and grays look dull. But when I turn the brightness back up, the whites are blinding. Has anyone else noticed this?
eMac 40GB 1.25 GHz G4 Mac OS X (10.3.9)

If your Sky router is anything like my Netgear, the problem is the way you have to enter the WEP password on a Mac. IIRC, there are a couple of options for the password format, and you need to choose the right one. I think they were Hex and ASCII. My password has to be entered as 26 characters of Hex - that's how the passkey is displayed in the router when you enter the password there for the first time.
On a Windows machine, I just key that password in full. On my Macs, I have to tell it that I'm using Hex, not ASCII - there's a drop down box with all the various options somewhere that allows you to select the encryption type and the key format.
For some reason, OS X isn't clever enough to work out whether you are entering Hex or ASCII.
If you get really stuck, you can always disable WEP on the router - log in using a wired connection (usually you type 192.168.0.1 into Safari) and set wireless security to none. Check that your macbook can now connect wirelessly, then re-enable security, making a note of the new passkey.
Might be worth doing this anyway, and choosing a more secure setting.

Hehe one more speedfan question

Ok i realise that ive asked this before, but im sure that p2 diode is giving me bogus readings.
My p4 has the stock hs, with the shitty normal heat pad thingy and right this moment my cpu is at 30-31c (alledgedly) and my mboard at 30c (which i can believe).
Sorry to sound like a nagging old woman or something but i just cant believe my cpu is at 30c with stock hs.
Alternative settings give me 45c for cpu which seems right to me.
One more last thing what is the p2 diode?
Am i right in thinking p2 diode is built into the cpu and thermistor is part of the mboard?????????????

I was in the exact same boat as you when I originally fired up my comp...I wasn't too worried about the temp cause 45C with stock cooling sounded right...however, when I changed my hsf to the thermalright SP-94 with a vantec tornado 80mm, installed with artic silver 5, I was still getting 45C. So I re-installed the hsf to ensure I didn't do something totally crazy, fired up once more, and guess what temp I got with thermistor diode? that's right...45C. I then switched to PII diode and started getting MUCH more realistic temperatures. So believe what you like, but I'd stick with the PII diode readings if I were you...at least until a response from MSI is given.

Sorry. One More OnyX Question!

Sorry. I just realized I had one more question pertaining to OnyX. When I'm on the Optimization page, it says to either "update" or "complete optimization" options for optimization. What do either of those options mean? I'm just a little scared to try any of those things if I don't know what they do.
Thanks,
Rodriguez_Prime
iBook G4 14'' 30GB HD 1.2 GHz PowerPC 256MB Mac OS X (10.4.9) (RED) 2nd Gen 4GB iPod Nano•••Black 1st Gen 2GB iPod Nano

Rodriguez,
If you value your data, you will sit down and understand what it means to backup your data. Lack of patience is no excuse. You'd have even more lack of patience with your machine when you lose it all. Keep at least two copies of everything at all times. Don't reformat your hard drive without making sure there are two external copies of your data. Methods of backing up vary by individual. If you are the kind who lacks patience, run a clone every night the weather is known to be good with Superduper. It has the least complicated interface. Use a couple external Firewire hard drives at least the size of the internal hard drive to make the clone. An iPod is not a backup, since software copying music from the iPod to the computer is unreliable.
Upgrade only when you need to, and are aware that everything you have works with the update before you do upgrade. And repair permissions before and after with Applications -> Utilities -> Disk Utility.
Upgrade and backup only when you have no peripherals attached other than Apple's own (i.e. keyboard, mouse). A display is not affected by updates or backups, as long as there is no USB or Firewire plugged into the display.

One more ultrabeat question....

hello folks...
i have an idea which i want to try but have no clue how to get it done in ultrabeat...
so i load three samples in ultrabeat (with drag & drop) say 1.snare 2.hi-hat and 3.one more hi-hat
now is it possible to have one hi-hat in 1/8 resolution playing in the pattern and other in 1/16 resolution (at the same time) and is copied to logic when i drag the pattern of it. hope i am clear here with the question....
i am not able to do this because when i change the RESOLUTION in the lower options it changes resolution of every sample loaded (1-25)
waiting for an answer....

In short... No!
The resolution parameter affects the 'size' of each step for all sequences in a pattern.
Maybe you could program one of the parts in a second pattern set to the correct resolution, import that MIDI region, the merge the two regions.
Or maybe run 2 instances of Ultrabeat??
HTH
CCT

[solved] One more conky question (convert cpu temp from C to F)

Okay, one more and then conky is finished I want to convert my cpu temp from C to F because it's just easier to understand for me, I am an american ... I've tried various ways I've found on these forums, but none of them seem to work, here's my cpu temp conky script:
${execi 1200 echo $(($(cat /sys/bus/pci/drivers/k10temp/0000:00:18.3/temp1_input) / 1000)) C}
Last edited by Mr_ED-horsey (2011-07-21 01:26:16)

What's the output of
cat /sys/bus/pci/drivers/k10temp/0000:00:18.3/temp1_input
? It should read about 55 C.
I have no idea how the sensors work, I've never used them, but you can doublecheck the conversion using just about anything, even google: http://www.google.pl/search?q=55+c+in+f … =firefox-a

One more memory question

Hi again everybody,
I just realized I forgot to ask one more thing about memory. Does anyone know, using System.setProperty, what the command is to set the JVM to a specific size inside the program? I don't mean setting the memory size permanently, I mean setting it just for the run of the program. I'm trying to get my application not to depend on the command line so I can take it out of my IDE.
Thanks,
Jezzica85
Edited by: jezzica85 on Apr 10, 2008 8:31 PM

Yeah Kajbj I agree with you only from external side we can set the heap memory size.
As you told already it is impossible to set the heap memory size dynamically with in the program.
Suppose Task A has B,C,D tasks and we want to set different set different size of heap memory to these tasks
in this case lets have B,C and D as separate processes and invoke them from A with the heap memory sizes we wanted.
Its just an idea feel free it criticize it.
*If our tasks are as simple as the ones i have told this will be good otherwise it becomes complete mess.
Thanks
D. L. Kumar

One more generics question

One more dumbshit generics question...
Is there a way to do this without the warnings or the @SuppressWarnings({"unchecked"})
   * Returns the index of the last occurrence of the specified element in this
   * list, or -1 if this list does not contain the element.
//@SuppressWarnings({"unchecked"})
public int lastIndexOf(Object object) {
    int i = 0;
    int last = -1;
    for(Node<E> node=this.head.next; node!=null; node=node.next) {
      if (node.item.equals((E) object)) {
        last = i;
      i++;
    return(last);
produces the warning
C:\Java\home\src\linkedlist\LinkedList.java:313: warning: [unchecked] unchecked cast
found   : java.lang.Object
required: E
      if (node.item.equals((E) object)) {
                               ^... remembering that List specifies +public int lastIndexOf(Object object);+ as taking a raw Object, not E element, as I would have expected.
Thanx all. Keith.
PS: Crossposted from the tail of http://forum.java.sun.com/thread.jspa?messageID=10225418&#10225418
which nobody has answered, I presume because the thread is marked as "answered".

I'm not sure you understood or if I made myself clear. Or perhaps I'm missing a vital detail in your implementation.
I'm talking about the cast to E in this line:if (node.item.equals((E) object)) {Object.equals() takes a parameter of type Object. So the cast to E is superfluous. That cast is what's causing the warning. You remove the cast => no more warning => you can remove the SuppressWarnings annotation.
Unless your E's have an overloaded equals() that takes an argument of type E. In that case you'll have to live with it.

Yet one more production question: search topics

This might be another pain in the rear question, but I am
looking for a way to globally replace text throughout all topics.
Does Robo have a way to search through ALL topics so that I
can replace text? (This isn't something right now that can be
handled via snippets or variables as the original text is not in a
variable or a snippet. We've decided to change some phrasing and I
am looking for keywords that I can highlight/find so I can reword
the text. I very well may be able to insert snippets or variables
during editing, but will want to locate all instances of a
particular word or phrase.)
I have about 50 - 60 separate topics in a project and I'd
like not to have to eye ball each topic in order to find the
string/phrase.
Thanks!

Hi there
RoboHelp does offer a utility called Multi-file find and
replace. But it's probably only reliable for single words. If you
want something fancier and more robust, consider BK ReplacEm or
FAR.
FAR Home Page
BK ReplaceEm
Cheers... Rick

One more vPC Question

The scenario is two Nexus 5K vPC domains connected to each other in a bow tie.
If you went into switch 1 and did a "sh etherchannel" or "sh port-channel" or whatever the devil the command is, would it show the uplinks in the peer switch (2) as being part of the channel or just its own local uplinks?

Essentially you are correct in that switch1 will only use it own ports to send traffic to the upper pair of Nexus switches.
But it is misleading to say it is not the same port channel because it is even from a data plane perspective because all ports are forwarding ie. STP has not blocked any member ports. I do understand your point that with a stacked pair of switches, for example, any of the available links could be used and this is not the case here or maybe a better way of putting it is it is not the case from switch1's perspective.
If, as Glen suggested, you look at it from the perspective of a device connected to switch1 and switch2 with an active/active configuration there are four links available, all forwarding traffic.
I actually think the first diagram you posted explains how a double sided vPC works far more clearly than the second ie. from a logical perspective it is just one high bandwidth path.
Jon

One more scrollbar question...

I have a JTable 'embedded' in a JScrollPane. The table is wide enuf and hence the horizontal scrollbar
is always present. The problem is, whenever I click on the table the horizontal scrollbar moves accordingly.
I dont want this to happen. I should be able to move horizontally ONLY using the respective scroll bar.
Any one knows how to do it ?
Thanks.

Hi Codekin,
To address your first question, the best way to create a tooltip type of message would be to register the PlotMouseMove event. This event will fire everytime you move the mouse cursor over a plot. You can then create a callback function which you can use the X and Y coordinates, which the event provides, and display them any way you desire.
Unfortunately, you can not add a Horizontal Scroll Bar to the graph control. On the graph tab of the properties, there is Track Mode selection which allows you to decide what to do with the graph as the data leaves the original screen. Although none of these allow for a scroll bar, you should be able to find the best behavior by playing around with these values.
This should get you on your way, but if you have any additional questions whatsoever, please repost and I'll get back to you as soon as I can. Thanks and have a good one.
Adam B.
Applications Engineer
National Instruments

One more crazy question:Turbo Boost and Middletion BIOS

Similar Messages

Maybe you are looking for