One more iOS bug found

When using advanced editor, the cancel button tries to post and gives a message that you cannot post a blank form. It does not cancel.
This is the one that made my wife finally sigh and say "what is wrong with them? they don't normally mess up this bad" after hearing me complain about lack of iOS support. She also just said i dont sound this mad at M$. Then she observed why, we expect so much more from apple. How they could over look millions of ipad users.
Jason

I agree that the example does not (and should not) compile.

Similar Messages

Solaris 10 wont install - One or more disks are found

Hi,
Hi I am new to installing Solaris on a E450 server.
I place the cdrom and type boot cdrom
Answering questions about network region etc.
The installer starts the installation and comes with an error:
One or more disks are found, but one of the
following problems exists:
> Hardware failure
> Unformatted disk.
So no installation.
How do I solve this?
I have tried different disks and even to format the disks.
I have had FreeBSD running on this system without any problem.

The solution:
If you��re trying to install Solaris (SPARC) on a disc which previously had another O/S (*BSD) on it, you will more then likely come across the following error after the system identification stage is complete:
One or more disks are found, but one of the following problems exists:
> Hardware failure
> Unformatted disk.
The problem is to do with the disc label, at the shell fireup format with the e switch
format -e
select the disc which you are trying to install onto, if you are told that the disc doesnt not contain a disk label, would you like to write a lablel, say yes & specify the type as SMI Label, If youre not asked about the label & presented with a menu, goto the partition section, choose label, specify the type as SMI.
quit & reboot & all should be well

One or more errors were found while trying build the realse version

While i am generating .ipa file i am getting another error mentioned below.
One or more errors were found while trying build the realse version
Packing error while generating .ipa file for iphone.

This is a forum for Adobe Acrobat Froms not the Flash/Flex product.

IPad 2 IOS 8.1.1 there is "one more thing"

Ipad 2 IOs 8.1.1 Now seems that things are going better, all is more quick and stable, but there is
"one more thing"
yet to resolve.
The ipad need 4-5-6 minutes to boot, it restart more than one and there is always the sensation that it will going to inside a infinite loop.
This problem is started for me with ios 8.0 when I due reinstall the Ipad for the beginning.
So I waiting for IOS 8.1.2 I hope soon. Thanks
Giulio

There aren't too many things that prevent an iPad from charging.
1. Bad charger. Try a different charger. For charging iPads the best way to charge is to use the charger that came with the iPad and plug that into a known good wall outlet.
2. Bad cable. Try a different Cable.
3. Dirt, lint or fuzz in the connection port. Inspect and carefully clean with w wooden toothpick if necessary.
4. Software failure. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
5. Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Does it make sense to buy an iPod touch 5th gen. 64 gb with iOS 7 and upgrade it to iOS 8, or spend a few bucks more and buy one with iOS 8 already installed?

Does it make sense to buy an iPod touch 5th gen. 64 gb with iOS 7 and upgrade it to iOS 8, or spend a few bucks more and buy one with iOS 8 already installed?

The iOS update us free so I would get the less expensive one.
If you are getting a used one make sure this is done before you purchase it. Otherwise it may still have the Activatin Lock on
Find My iPhone Activation Lock
Apple's new iCloud tool can show if a used iPhone is stolen

Evry time after sync. my iphone 4 ios 4.3.3 with itunes 10.3.1.55 the time change up one more hour ,, please tell me what can i do to solve this problem

evry time after sync. my iphone 4 ios 4.3.3 with itunes 10.3.1.55 the time change up one more hour ,, please tell me what can i do to solve this problem

This year, the government has canceled the daylight saving time , that's why happening this problem to me so I changed the time zone in iPhone from Cairo,Egypt (GMT+2 with daylight saving) to Harare,Zimbabwe (GMT+2 without daylight saving , no change in time from summer & winter) & now working good, no change in time after sync. , But it's very stupid thing from apple that they didn't add an option in time setting to enable or disable the daylight saving time like any other mobile.

Strange bug -- adding one more button OR page causes Form warning to appear

I'm building a simple interactive document in InDesign CS4 on the Mac, to be exported/delivered as a PDF. There are a few text-based buttons on the Master Page that are set to Go To a Text Anchor on Release. There are 4 buttons of these buttons on the page, and each one leads to a different page in the document, and they all work fine. They are all built the same way.
I want to export a PDF that opens cleanly in Reader, meaning no unexpected dialog boxes or warning messages appear. Up until this point, my document opens cleanly in Reader.
However, when I create a FIFTH button (using the exact same method used to create the other buttons), OR I add ANY more pages to my document (which currently stands at 16 pages, but will need to ultimately be upwards of 40), for some reason, opening the PDF in Reader causes Reader to start displaying the large, distracting pink warning message at the top of the page:
"Please fill out the following form. You cannot save data typed into this form. Please print your completed form if you would like a copy for your records."
The fifth button I create (from scratch) causes this message to appear.
Or, if I add another page (using my Master Page, where the buttons are used), this message appears. Even if the fifth button is not created, and I add another page from the Master, this message appears.
If I add a blank new page (without using the Master Page), the message does NOT appear.
So, for some reason, adding ONE more button, or referring to the Master Page in the document ONE more time by adding a 17th (or more) pages, seems to kick InDesign/Acrobat Reader into thinking my document is suddenly a form, and causes Reader to display that obnoxious pink message when opening the document.
I've tried several troubleshooting steps.
- I've ensured my buttons have unique names.
- I've tried creating the fifth button from scratch, and also tried creating it from duplicating one of the existing "good" buttons.
- I've made sure the button has a destination page/Text Anchor to go to.
- I've opened the PDF in Acrobat Pro 9, and gone through all of the page and buttons in the Forms Manager, and there is nothing out of the ordinary in that view.
Why is Reader suddenly thinking my document is a form (that "cannot be edited/saved") when I add one more button, or one more page!? It's bizarre, and quite frustrating.
Thanks for any insights,
Robbie

You can use that same workaround with ID CS4 files. You just have to make the PDF and then go into Acrobat to add the security that doesn't allow editing (Acrobat -> Security -> Encrypt with Password) . That gets rid of the warning about the form. Of course if you actually have a form somewhere in your document, you won't be able to use that......

Service Instances VLAN limit or IOS bug ?

Hi,
I've a big problem with a service instance VLAN limit , I can't add more than N characters inside the command "encapsulation dot1q".
This is the platform:
CISCO7606-S
CARD: ES+
IOS: c7600s72033-advipservices-mz.122-33.SRD8.bin
And this is the example:
interface GigabitEthernet3/3
service instance 300 ethernet
encapsulation dot1q 502,506,508,513,517-518,528,532,535,548,
555-556,577,608,611-613,637,662,664,667,673,688,702,840,848,851,862,876,887,895,922,934
After the VLAN 934 the router does't add more VLAN and if you try to add another one the command is accepted, no errors appear, but if you check again the show run of the interface..nothing changed!
I tried to load the startup configuration from tftp and reboot but no luck..the only workaround that i've found is to join the vlan effectively reducing the number of characters.
I think that could be an IOS bug, but can't find any evidence of this theory...
Have you ever faced this kind of problem?
Thanks and Regards
Roberto

Well I think it's just a bug, because I just copy all my rules (policy-map,class-maps,ACLs), change they names(add 1 at the end)(router change their ID's I suppose), and point this to my zone-pair security and it works fine!
class-map type inspect match-all DMZ310_TO_INTERNET_PASS1
match access-group name DMZ310_TO_INTERNET_PASS1
class-map type inspect match-all DMZ310->INTERNET_INSP_COMB1
match access-group name DMZ310_TO_INTERNET_INSPECT1
match class-map DMZ310->INT_INSPECTION_PROTOCOLS1
class-map type inspect match-any DMZ310->INT_INSPECTION_PROTOCOLS1
description ---=============
match protocol tcp
match protocol icmp
match protocol dns
match protocol user-nashssh
match protocol http
match protocol udp
policy-map type inspect DMZ310->INTERNET_POLICY1
class type inspect DMZ310_TO_INTERNET_PASS1
pass
class type inspect DMZ310->INTERNET_INSP_COMB1
inspect
class class-default
drop
zone security INTERNET
zone security DMZ310
zone-pair security DMZ310->INTERNET source DMZ310 destination INTERNET
service-policy type inspect DMZ310->INTERNET_POLICY1
interface GigabitEthernet0/1.310
encapsulation dot1Q 310
ip address 1.1.1.2 255.255.255.128
ip nat outside
ip virtual-reassembly in
zone-member security DMZ310
standby 3 ip 1.1.1.1
standby 3 priority 15
standby 3 preempt
ip policy route-map BGP-DEFAULT-ROUTE
service-policy input POLICE_DMZ310_IN
service-policy output POLICE_DMZ310_OUT
interface GigabitEthernet0/1.301
description -=ISP=-
encapsulation dot1Q 301
ip address 2.2.2.2 255.255.255.252
ip flow ingress
ip nat outside
ip virtual-reassembly in
zone-member security INTERNET
ip access-list extended DMZ310_TO_INTERNET_INSPECT1
permit icmp host 1.1.1.5 any
permit ip host 1.1.1.5 any
deny ip any any

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone esle sends me I can't view the images. Thye are all blank white squa

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.

Can I load Microsoft Office Word 2011 for MAC on an IPAD 2? If yes, then how? I have the software and one more load opportunity left.
Reason that I ask is that I'm worried that I will not be able to read or work word or excel docs that people send me.

No. Office 2011 for Mac is coded to run with OS X. In order to work on the iPad the app must be coded for iOS instead.
If you look in the iTunes App Store, you will find that there are many apps that allow you to work with Office files on an iPad.
Allan

Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?

Has anyone experienced the mute switch / auto-rotate switch iOS bug on their ipad?
I have experienced this on iPad 1 as well as iPad 2.
Basically, when you set the side switch to toggle screen orientation (or mute), after a period of use I will have either my sound cease to function or the ipad screen will not orient correctly. This depends on what i have chosen the side switch to toggle. I am not sure what causes it. The time it takes for the problem to appear is inconsistent. Some say it is caused by third party applications.
One can find numerous threads on here if you search for "sound on my ipad stopped working" or "orientation not working". It appears to be the same problem. Fudging with the toggle switch settings can fix it (but it takes a weird order to get it out of its non functioning loop).
Here is a thread that addresses the sound issue: https://discussions.apple.com/message/15263298#15263298

Its only for notifications.. it is not for sound from videos or music!

How can I add one more path in the classpath tag in xml

I have added the following line in the global-web-application.xml, and it works.
<classpath
path="/apps01/o9ias/j2ee/home/default-web-app/WEB-INF/properties"
/>
But whenever I add one more path into it, the oc4j can't start.
The Oracle manual Oracle9iAS Container for J2EE is beta. It doesn't tell the grammer to do that.
Hopefully you can share some ideas and let me know how to add some more path into it.
Thanks.
Wei

Hi Wei,
I have just done a quick search of the following URLs
http://www.orionserver.com
http://www.orionsupport.com
http://www.atlassian.com
http://www.elephantwalker.com
And -- as is nearly always the case -- found a shamefully minute amount
of information, and what I did find was totally useless.
Oracle have not produced any real documentation for OC4J -- they
claim it's coming in the next release -- and, as I already said, I
couldn't find anything on the Internet about "global-web-app.xml" or
"classpath" element. Therefore (surprise, surprise) your only option
(as I see it) is just experiment and try to hack the code.
I wish someone would please tell me if there's another option, because,
like you, I find it very frustrating to have to continually play
"guessing games" when trying to work with OC4J. I imagine other people
seem to enjoy this -- since I don't see anyone else complaining.
In any case, have you tried multiple "path" attributes, for example:
<classpath path="/your/path/" path="/your/other/path/"/>
Got nothing to lose, have you :-)
Good Luck,
Avi.

Bug found on ovi suite 2.2.1.23

xp... logged in with a limited account... 5230 v21.0.004... connected by bluetooth
if i check for updates the software give always no updates to install
works well if ovi suite runs under an administrator account

Hey rainbowcrypt,
i feel this is not a bug as we do have some .jar and .jad software installation files available to install in Symbian phones thru ovisuite. This might be the reason for associating the .jar files to ovisuite. As satari told either you could use 'open with' to change the application you use everytime. Or in the same 'open with' option you have one more option to use the same application everytime you use. In this way you can permanently make the .jar files to be opened in java and not in ovisuite.
Regards
Regards
Like my post? Give me a Kudos...... Ur problem solved? Accept my Solution :-)

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

Want to add one more link in the first screen when user gets into EBP

Hi All,
I want to add one more link to the template WELCOME in Internet Service BBPGLOBAL. This is the first screen that the user gets when he logs into EBP.
The issue is the same screen is different in DEV and TEST environment.
I verified the code in the template in both systems but they are exactly the same.
Also, checked the Parameters in the Templates and they too match.
While going through the code, I found out that MENU_NODE_TAB is used in a repeat loop to verify user has access to the further links.
But the surprising thing is the code is same in both the systems, but Test evnironment is reflecting the link I want to add in DEV environment.
Am I missing something??
Pls let me know.
Thanks in advance.
I will reward full points for helpful answers!!
Regards,
Sanaa

Hi,
In welcome.html there is a ITS code to initialize array with information about transaction (line 87).
This code is in the loop:
repeat with idx from 1 to MENU_NODE_TAB-TEXT.dim;
if( (MENU_NODE_TAB-S_IDENT[idx] == "BBPSC01" && A_GEN_URL == "") ||
 (MENU_NODE_TAB-S_IDENT[idx] == "BBPSC03" && A_GEN_URL == "") ||
 (MENU_NODE_TAB-S_IDENT[idx] == "BBPSC02") );
 A_S_IDENT = MENU_NODE_TAB-S_IDENT[idx];
 A_GEN_URL = MENU_NODE_TAB-GEN_URL[idx];
 A_OBJECT_ID = "parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".root.name + parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".path";
 A_TEXT = quotFilter(MENU_NODE_TAB-TEXT[idx]);
 A_INTRODUCTION = #WELCOME_SENTENCE6;
 found = 1;
end;
end;
If You want to add this 4 links on begining - extend this array (in line 87):

A_S_IDENT[1] = "custom_link1"; A_GEN_URL[1] = "www.google.com"; A_OBJECT_ID[1] = ""; A_TEXT[1] = "google"; A_INTRODUCTION[1] = "google link";
A_S_IDENT[2] = "custom_link2"; A_GEN_URL[2] = "www.rediffmail.com"; A_OBJECT_ID[2] = ""; A_TEXT[2] = "rediffmail"; A_INTRODUCTION[2] = "redi link";
A_S_IDENT[3] = "custom_link3"; A_GEN_URL[3] = "www.yahoo.com"; A_OBJECT_ID[3] = ""; A_TEXT[3] = "yahoo"; A_INTRODUCTION[3] = "yahoo link";
A_S_IDENT[4] = "custom_link4"; A_GEN_URL[4] = "www.greetings.com"; A_OBJECT_ID[4] = ""; A_TEXT[4] = "greets"; A_INTRODUCTION[4] = "greeting link";
A_S_IDENT[5] = ""; A_GEN_URL[5] = ""; A_OBJECT_ID[5] = ""; A_TEXT[5] = ""; A_INTRODUCTION[5] = "";
A_S_IDENT[6] = ""; A_GEN_URL[6] = ""; A_OBJECT_ID[6] = ""; A_TEXT[6] = ""; A_INTRODUCTION[6] = "";
etc.

repeat with idx from 5 to MENU_NODE_TAB-TEXT.dim;
Regards,
Marcin

One more iOS bug found

Similar Messages

Maybe you are looking for