One more time? gtkam, root, user. [solved]

Hey guys,
I've read all the posts I can find about this, but still haven't got it working. I can get both gtkam and digikam working with my camera as root, but not as a user. I did what the wiki page told me--no love.
Can somebody give me a hint? thanks.
Last edited by scrawler (2008-12-29 14:44:48)

It could be that your camera is not one known to libgphoto2. Have a look in /etc/udev/rules.d/54-gphoto.rules for the vendor and product ID shown by lsusb. If it's there but it's listed after the check-ptp-camera line then fixing that to read
PROGRAM="/lib/udev/check-ptp-camera", MODE="0660", GROUP="camera"
should get it working after restarting udev. If it's not there then making a local rule ought to work, e.g. for my Fuji FinePix S5700 I used to have to put
ATTRS{idVendor}=="04cb", ATTRS{idProduct}=="01c4", MODE="0660", GROUP="camera"
in my /etc/udev/rules.d/91-local.rules.

Similar Messages

HT5552 Apple decline payment method for apple ID (credit card VISA) after 2 weeks of active using it. And did it one more time

Few mothes ago I registered my Apple ID.Payment method chose credit card VISA. It allowed me to make purchases and download apps. But after 2 weeks it said that my payment method was declined and I have to register and pay 1$ once again. So I registered one more time with the same credit card, made several downloads and purchases and after 2-3 weeks the situation was the same. My payment method was declined. What is the reason?

Kateryna Malykhina wrote:
... My payment method was declined. What is the reason?
As this is a User to User forum no one here would know...
You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

How can I delete EVERY THING off my Mac and have it like new?
Boot from the software install DVD and do an "erase and install" when prompted.

[svn] 1594: Update the warning message when outbound throttle policy of REPLACE is used one more time .

Revision: 1594
Author: [email protected]
Date: 2008-05-07 11:10:27 -0700 (Wed, 07 May 2008)
Log Message:
Update the warning message when outbound throttle policy of REPLACE is used one more time. Now the warning says this. . .
Throttle outbound policy 'REPLACE' found on message destination 'MESSAGE_DESTINATION'. The 'REPLACE' throttle outbound policy has been deprecated. Please remove it from your configuration file.
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/MessageDestination.java

hamish72 wrote:
You can still download as much as you can only a lot slower during peak times off peak will not be restricted.
Thanks for this explanation. I had taken it that it was at all times.
As I said in the first place it will be great if they throttle me to 1Mb at peak times as it will be better half the time than I am getting anyway!!!!!!!!!
hamish72 wrote:
Have you chased up why your line is so bad, long way from exchange and so on
Posting your router stats may get advice from someone
enter for homehub for other routers will differ
192.168.1.254 in browser click A to Z top right
then ADSL enter pas and click MORE DETAIL
POST RESULTS
Also post results of test at ( best done from master test socket)
http://speedtester.bt.com/
Connection Information
Line state
Connected
Connection time
6 days, 11:57:55
Downstream
5,760 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.7 dB / 21.0 dB
Line attenuation (Down/Up)
44.6 dB / 24.0 dB
Output power (Down/Up)
8.9 dBm / 1.6 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
25279 / 134
CRC Errors (Down/Up)
700 / 196
HEC Errors (Down/Up)
5427 / 142
Error Seconds (Local/Remote)
477 / 102

How to download one more time the purchased content?

I purchased yesterday the OST of Fast Five, and unexpectedly I deleted it from my Mac. How to access it one more time?

If you are in a country where you can re-download music, and if it is still in the store, then it should show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes for re-downloading. If you aren't in a country where music can currently be re-downloaded then you will need to try contacting iTunes Support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have to pay one more time!

Hi!
I have bought the album called "Disc-Overy" from Tinie Tempah. I did reset my iPhone and set it up as a new iPhone. I also synced with another iTunes library. Now iTunes ask me to pay for the album again! I aldo bought the ringtone called "Levels" of Avicii and I have to pay for that one more time too!
And when it comes to app. I downloaded iCopter from appstore. I bought the pro version in-app and when i try to do the same again with this newly setup iPhone I also have to pay for this one more time! Please help me!

I've had the same problem with the albums when switching iPhones.
Usually when you click purchase in the app- or itunes store it will start the download but will then give you the message: "You've already bought this item, do you want to download it again?". In that case you won't be charged twice, but in my expirience that won't show up untill you're willing to make the purchase.
Best thing would be to just sync the new iPhone with iTunes if that already contains your purchased apps, books and music.

My iphone has broken and I had songs that I had purchased on there that I had not yet backed up on my computer. apparently you can download the tracks one more time free of charge does anybody know how??

how do you re download tracks that are on a broken iphone???

apparently you can download the tracks one more time free of charge does anybody know how??"
Not true. You get one and only one download.
In some instances, itunes has allowed another download to a few. This is not the norm.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
Hope all goes well.
http://www.apple.com/support/itunes

HT201272 I bought PDF expert $9.99 for my ipad. When I tried to download to my iphone 5 , they tried to charge me one more time. Any solution?

I bought PDF expert $9.99 for my ipad. When I tried to download to my iphone 5 , they tried to charge me one more time. Any solution?

There are two separate PDF Expert versions on App Store: PDF Expert for iPad and PDF Expert for iPhone. PDF Expert for iPad differs from iPhone version and both versions are not free.

Big problem with my macbook pro 2009 - 3 motherboard changed at applestore Velisy and one more time it is for nothing.... ! Apple says you're not lucky?????

3 motherboard i have changed at applestore Velisy and one more time it is for nothing.... !
Apple says you're not lucky????? What can i do

A sorry it 's macbook pro unibody from 2011

OpenOffice doesn't allow editing when non-root user [SOLVED]

I've been having this problem for some time now: for example whenever I open swriter to edit a text or make a new one, swriter always closes at the moment I type something. This problem does not exist when I use OO as the root user.

Try removing the .openoffice.org2 folder in your home directory. You'll need to do that as root, if the problem is what I think it is... You see, OOo seems to do some configuration on install, and that's as whatever user installed it - so if you install from Arch's packages, you need to delete the config stuff before you can use it.
(Usually, though, that's manifested as OOo not starting at all, so I'm not sure it's your problem.)

Can't startx as non-root user [Solved]

I have no idea what's going on. I'm pretty sure I have my permissions set correctly, but right now running startx as a non-root user dumps me back out. Here's my log file:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/6d3da3d6-f72f-4623-82e7-e44e3c365711 ro
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 31 11:46:23 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "True"
(**) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling USB Mouse
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0649:103c:30f4 nVidia Corporation G96 [GeForce 9600M GT] rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00007000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.30 Fri Dec 18 14:21:29 PST 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 195.30 Fri Dec 18 13:43:18 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1440x900 +0+0; 800x600 +0+0; 640x480 +0+0"
(**) Dec 31 11:46:23 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 31 11:46:23 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 31 11:46:23 NVIDIA(0): enabled.
(II) Dec 31 11:46:24 NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:1:0:0 (GPU-0)
(--) Dec 31 11:46:24 NVIDIA(0): Memory: 524288 kBytes
(--) Dec 31 11:46:24 NVIDIA(0): VideoBIOS: 62.94.4a.00.10
(II) Dec 31 11:46:24 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 31 11:46:24 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 31 11:46:24 NVIDIA(0): Connected display device(s) on GeForce 9600M GT at PCI:1:0:0:
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0)
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) Dec 31 11:46:24 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) Dec 31 11:46:24 NVIDIA(0): Assigned Display Device: DFP-0
(II) Dec 31 11:46:24 NVIDIA(0): Validated modes:
(II) Dec 31 11:46:24 NVIDIA(0): "1440x900+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): "800x600+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): "640x480+0+0"
(II) Dec 31 11:46:24 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) Dec 31 11:46:25 NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
(--) Dec 31 11:46:25 NVIDIA(0): option
(==) Dec 31 11:46:25 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(II) Dec 31 11:46:25 NVIDIA(0): Initialized GPU GART.
(II) Dec 31 11:46:25 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Dec 31 11:46:25 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Dec 31 11:46:25 NVIDIA(0): configuration option may not be set correctly. When the
(II) Dec 31 11:46:25 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Dec 31 11:46:25 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Dec 31 11:46:25 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Dec 31 11:46:25 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Dec 31 11:46:25 NVIDIA(0): Config Options in the README.
(II) Dec 31 11:46:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Dec 31 11:46:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) Dec 31 11:46:25 NVIDIA(0): Setting mode "1440x900+0+0"
(II) Loading extension NV-GLX
(II) Dec 31 11:46:25 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 31 11:46:25 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event11"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device HP Webcam
(**) HP Webcam: always reports core events
(**) HP Webcam: Device: "/dev/input/event9"
(II) HP Webcam: Found keys
(II) HP Webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Primax HP Wireless Laser Mini Mouse
(**) Primax HP Wireless Laser Mini Mouse: always reports core events
(**) Primax HP Wireless Laser Mini Mouse: Device: "/dev/input/event10"
(II) Primax HP Wireless Laser Mini Mouse: Found 3 mouse buttons
(II) Primax HP Wireless Laser Mini Mouse: Found scroll wheel(s)
(II) Primax HP Wireless Laser Mini Mouse: Found relative axes
(II) Primax HP Wireless Laser Mini Mouse: Found x and y relative axes
(II) Primax HP Wireless Laser Mini Mouse: Found absolute axes
(II) Primax HP Wireless Laser Mini Mouse: Configuring as mouse
(**) Primax HP Wireless Laser Mini Mouse: YAxisMapping: buttons 4 and 5
(**) Primax HP Wireless Laser Mini Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax HP Wireless Laser Mini Mouse" (type: MOUSE)
(**) Primax HP Wireless Laser Mini Mouse: (accel) keeping acceleration scheme 1
(**) Primax HP Wireless Laser Mini Mouse: (accel) acceleration profile 0
(II) Primax HP Wireless Laser Mini Mouse: initialized for relative axes.
(WW) Primax HP Wireless Laser Mini Mouse: ignoring absolute axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event7"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event4"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by contumation (2009-12-31 22:41:31)

JuseBox wrote:Do you have a .xinitrc config? Also do you have anything in it?
My /home/<user>/.xinitrc file:
rl=$(runlevel | grep -o [0-6])
case $rl in
4) exec gnome-session;;
5) exec openbox-session;;
esac
quarkup wrote:
please paste the output of
ls -l ~
total 36
drwx------ 3 bao users 4096 Dec 31 13:58 .
drwxr-xr-x 5 root root 4096 Dec 31 03:26 ..
-rw------- 1 bao users 396 Dec 31 11:46 .bash_history
-rw-r--r-- 1 bao users 16 Aug 1 06:22 .bash_profile
-rw-r--r-- 1 bao users 108 Aug 1 06:22 .bashrc
drwxr-xr-x 3 root root 4096 Dec 31 03:34 .config
-rw-r--r-- 1 bao users 0 Dec 31 13:58 ls.txt
-rw------- 1 bao users 0 Dec 31 11:44 .Xauthority
-rw-rw-rw- 1 bao users 102 Dec 31 03:37 .xinitrc
-rw-r--r-- 1 bao users 278 Dec 31 03:32 .xinitrc~
-rw-r--r-- 1 bao users 100 Nov 21 10:01 .xsession
Last edited by contumation (2009-12-31 20:01:21)

[SOLVED]If I see "Maybe the USB cable is bad?" one more time...

Hey guys, having trouble with all USB devices on my computer. Doesn't matter where it's plugged in, even on a USB 3.0 expansion card, and doesn't seem to matter what device it is either, I'm struggling with this:
[ 268.656687] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 272.626205] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 276.598295] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 280.565223] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 280.791874] usb 8-7: new high-speed USB device number 13 using ehci_hcd
[ 280.868601] hub 8-0:1.0: unable to enumerate USB device on port 7
[ 284.968029] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 288.937553] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 292.907066] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 296.876583] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 299.715911] device eth0 entered promiscuous mode
[ 308.558490] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 312.528011] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 316.497519] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 320.467042] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 320.783672] usb 8-7: new high-speed USB device number 22 using ehci_hcd
[ 320.863708] hub 8-0:1.0: unable to enumerate USB device on port 7
[ 324.963154] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 328.932674] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 332.902188] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 336.871716] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 351.053314] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 355.022842] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 358.992346] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 362.961869] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 374.003868] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 374.018495] usb 1-2: device descriptor read/8, error -71
[ 374.135238] usb 1-2: device descriptor read/8, error -71
[ 374.290509] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 374.517127] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 379.053245] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 383.022766] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 386.992283] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
That's me unplugging and replugging a device in different places. Note that the message appears multiple times each time I plug it in.
But this isn't just that one device (a galaxy tab if you're wondering). This happens with so many devices I'm going up the wall. It even happens with USB Flash drives! "I'LL JUST USE A DIFFERENT CABLE OH WAIT COMPUTER YOU'RE AN IDIOT."
Sorry, just so frustrated. I've tried the classic capacitor flush (turn off, hold power button in with power calbe unplugged) and it's been doing this for a while, so updates haven't solved it. Different types of devices too, not just storage. Even a keyboard did it one time. You guys got any ideas at all?
EDIT: Before that inevitable post comes, yes, I've plugged it directly into the ports that are attached to the back of the motherboard, please don't ask, please, please, please. I know someone won't read this whole post and will ask anyway but a guy can try.
EDIT EDIT: I forgot to actually say that usb devices do not work when this message appears.
Last edited by MisterAnderson (2013-03-17 04:56:42)

If the errors are consistent across OS (ie LiveCD, Windows?) then your motherboard is most likely on it's way out and needs replacing
You could try removing the motherboard cell battery and doing the "classic capacitor flush" again. Leaving the battery out for a period of time generally has the same effect and in "classic" IT style fixes numerous woes... have you tried a different cable?
If, after replacing the battery, the problem has disappeared I would still treat the hardware as suspect and have it replaced as soon as possible. These sorts of brain farts typically reappear sooner rather than later

One more time - problems with fans

I realize this is but one of hundreds or possibly thousands of cases of Mac users being plagued by fan noise problems, but to me it has been a long and extremely frustrating saga. I have been a Mac user since the very beginning, through different versions of Macs and iMacs, and this is the first time I ever refer to a Macintosh as a "piece of junk."
I bought my iMac G5 in August 2005, a 20-inch ALS with 250 GB hard drive and 512 MB RAM. It worked perfectly until January this year, when all of sudden it shut down by itself. Freaked me out completely. Turned out to be power supply problem (EMC 2056) which Apple never informed me about.
I brought it to a repair shop that fixed the intermittent shut-down problem. I also added 1GB memory. But then the fans started to go berserk. Before the power supply problem, I only heard the fans whenever I used a large program like Photoshop. For the most part, it was a very quiet machine. After the power supply was replaced, within minutes of turning the iMac on, I could hear the fans spinning faster and faster, stabilizing at around 4400 rpm and did not stop spinning until I put the iMac to sleep or turned it off, regardless of CPU usage or software being used.
I checked the discussions at this forum (over 500 posts, no real answer) and did every "voodoo trick" suggested: I reset the SMU dozens of time, cleaned the inside of the iMac and around the fan area, did apple hardware test (everything was fine), monitored temperature and activity with XRG (average CPU at 160F, hard drive at 113F), cleaned out caches, tested for corrupt preferences, re-installed the original OS 10.4 (which only made the fans louder), upgraded it back to OS 10.4.9. I also removed the additional 1 GB memory, thinking it might be a bad piece. It didn't help.
Finally, I requested fan replacement from Apple and got them. I installed them last Sunday and now the problem is even worse! Within SECONDS of turning it on, the CPU T- Dio soars to around 170F, even while the machine is still stone cold to the touch. The hard drive temperature now averages at 117F, CPU fan is never below 4000 rpm (4400 rpm 98% of the time), even at 5-8% CPU usage.
The fans themselves are much quieter because they're brand new. But you can still hear the hums and whirs and it drives me nuts. More seriously, my iMac is now narcoleptic. If I use it too long (a few hours on a stretch) it will put itself to sleep, apparently because it thinks it is overheated. And when I use Photoshop or Illustrator, the awake time is even shorter. Depending on the outside temperature, at the most I can only use them for about an hour at a time. Two days ago we had heat wave, and even with the air conditioner running full blast in my study, the iMac kept falling asleep within minutes of using Illustrator.
Right now I am using TextEdit and no other program is running. Uptime is 59 minutes, average CPU 9.6%. CPU T-Dio is at 168.8F, hard drive 117.5F, CPU fan at 4400 rpm. I am out of ideas and before I do something drastic to this machine, if anyone knows what's going on with my iMac (I know every case is different), please help!
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB

I do not have the solution... but the same problem with a nice iMac G5 purchased in July 2005.
My Mac operated very silently untill 6 month ago;problem MAY ( I am not sure) have started when I upgraded to 10.4.10 ; even with few applications and low CPU usage (80% or more inactive), it seems that I have the following regrettable chain of events;
==> the CPU temperature is quite high ( 60°c to 72°c most of the time, ie 140-160 °F)
==> resulting in fan turning at high speed ( 2.000 for CPU and system, 2500 for HD), and changing speed all the time
==> resulting in a noisy computer
I am SURE this was not the case 6 month ago, and I suspect it is linked to my upgrade to 10.4.10.
I did all sorts of reinstall, authorization repair, SMU reset, fan clean-up with no sucess.
iMac G5 (2005) Mac OS X (10.4.10) POwerbook G4 Titanium (2001)

I can tell the differnce when listening to "One More Time" by Daft Punk...

...The 356kb version when compared to a 128kb version I had. The electronic sounds sound a lot more crisper then on the other one...not to mention it doesn't make a fuzzy sound when I turn it up high on the iPod...but then again, like I said in another thread, I also compared "Smile" by Lily Allen and they sounded very much the same. I'm also using noise-cancelling headphones and a brand new audio card so it should be easy to hear the difference when played...to tell you the truth, it's better on a few songs but sound very much the same on other songs...it depends on what the song is and what type of audio equipment you have.
Windows XP

If the errors are consistent across OS (ie LiveCD, Windows?) then your motherboard is most likely on it's way out and needs replacing
You could try removing the motherboard cell battery and doing the "classic capacitor flush" again. Leaving the battery out for a period of time generally has the same effect and in "classic" IT style fixes numerous woes... have you tried a different cable?
If, after replacing the battery, the problem has disappeared I would still treat the hardware as suspect and have it replaced as soon as possible. These sorts of brain farts typically reappear sooner rather than later

Catch minimize panel event (one more time)

As discussed in other threads, CVI doesn't have a specific event fired when a panel is minimized. Some workarounds has been proposed, and I successfully used the EVENT_LOST_FOCUS method for a long time.
But now I found a situation when this workaround doesn't' work:
if the main panel has a tab control
if one of the tab pages has the focus
the EVENT_LOST_FOCUS is not generated for the main panel when the application is minimized with the classical top-right "_" button in the title bar.
How can I catch the minimize panel event in this situation?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
Solved!
Go to Solution.

Thanks for your help, jared.
The panel attribute name is ATTR_PANEL_PARENT
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

One more time? gtkam, root, user. [solved]

Similar Messages

Maybe you are looking for